If we run into a part with a harvest configuration where the entire
IP block is unusable, just disable the IP block.

v2: fix logic as noted by Christian
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

Just to make sure userspace don't send nonsense to the kernel.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

Port of amdgpu patch 9298e52f.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can be the case when the GPU is powered off, e.g. via vgaswitcheroo
or runpm. When the GPU is powered up again, radeon_gart_table_vram_pin
flushes the TLB after setting rdev->gart.ptr to non-NULL.

Fixes panic on powering off R7xx GPUs.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61529Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This reverts commit dec4f799.

Jörg Otte reports a NULL pointder dereference due to this commit, as
'crtc_state' very much can be NULL:

        crtc_state = state->base.state ?
                intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;

So the change to test 'crtc_state->base.active' cannot possibly be
correct as-is.

There may be some other minimal fix (like just checking crtc_state for
NULL), but I'm just reverting it now for the rc2 release, and people
like Daniel Vetter who actually know this code will figure out what the
right solution is in the longer term.
Reported-and-bisected-by: NJörg Otte <jrg.otte@gmail.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cayman does not have vce.  There were a few places in the
shared cayman/TV code where we were trying to do vce stuff.

v2: remove -ENOENT check
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise we try to clear BO_VAs without an address.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=91141Signed-off-by: NChristian König <christian.koenig@amd.com>
Test-by: hadack@gmx.de
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to allways add the VM clear duplicate of the BO_VA,
no matter what the old status was.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Test-by: hadack@gmx.de
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit ac913490.

We've fixed the underlying problem with cursors, so re-enable
this.

Reviewed-by: NGrigori Goronzy <greg@chown.ath.cx>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Everything is evicted from VRAM before suspend, so we need to make
sure all BOs are unpinned and re-pinned after resume. Fixes broken
mouse cursor after resume introduced by commit b9729b17.

[Michel Dänzer: Add pinning BOs on resume]

v2:
[Alex Deucher: merge cursor unpin into fb unpin loop]

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100541
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Take a GEM reference for and pin the new cursor BO, unpin and drop the
GEM reference for the old cursor BO in radeon_crtc_cursor_set2, and use
radeon_crtc->cursor_addr in radeon_set_cursor.

This fixes radeon_cursor_reset accidentally incrementing the cursor BO
pin count, and cleans up the code a little.

Cc: stable@vger.kernel.org
Reviewed-by: NGrigori Goronzy <greg@chown.ath.cx>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently pdd is validate after dereferencing it, which is
not correct, Thus validate pdd before its first use.
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Stolen gets trashed during hibernation, so storing contexts there
is not a very good idea. On my IVB machines this leads to a totally
dead GPU on resume. A reboot is required to resurrect it. So let's
not store contexts where they will get trampled.

This reverts commit 149c86e7.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The old style of memory interleaving swizzled upto the end of the
first even bank of memory, and then used the remainder as unswizzled on
the unpaired bank - i.e. swizzling is not constant for all memory. This
causes problems when we try to migrate memory and so the kernel prevents
migration at all when we detect L-shaped inconsistent swizzling.
However, this issue also extends to userspace who try to manually detile
into memory as the swizzling for an individual page is unknown (it
depends on its physical address only known to the kernel), userspace
cannot correctly swizzle objects.

v2: Mark the global swizzling as unknown rather than adjust the value
reported to userspace.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The "if (pass_size > buf->total)" can underflow so I have changed the
type of size and pass_size to unsigned to avoid this problem.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer ASICs have more VRAM on average and allocating more GART as
well can have advantages. Also see commit edcd26e8.

Ideally, we should scale GART size based on actual VRAM size, but
that requires significant restructuring of initialization.

v2: extract small helper, apply to error paths
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This was regressed by commit 39e7f6f8, although I don't know of any
actual issues caused by it.

The storage domain is read without TTM locking now, but the lock
never helped to prevent any races.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We don't need to call the (expensive) radeon_bo_wait, checking the
fences via RCU is much faster. The reservation done by radeon_bo_wait
does not save us from any race conditions.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NGrigori Goronzy <greg@chown.ath.cx>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is a translation of the patch ...
"drm/radeon: Handle irqs only based on irq ring, not irq status regs."
... for the vblank irq handling, to fix the same problem described
in that patch on the new driver.

Only compile tested due to lack of suitable hw.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
CC: Michel Dänzer <michel.daenzer@amd.com>
CC: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Trying to resolve issues with missed vblanks and impossible
values inside delivered kms pageflip completion events showed
that radeon's irq handling sometimes doesn't handle valid irqs,
but silently skips them. This was observed for vblank interrupts.

Although those irqs have corresponding events queued in the gpu's
irq ring at time of interrupt, and therefore the corresponding
handling code gets triggered by these events, the handling code
sometimes silently skipped processing the irq. The reason for those
skips is that the handling code double-checks for each irq event if
the corresponding irq status bits in the irq status registers
are set. Sometimes those bits are not set at time of check
for valid irqs, maybe due to some hardware race on some setups?

The problem only seems to happen on some machine + card combos
sometimes, e.g., never happened during my testing of different PC
cards of the DCE-2/3/4 generation a year ago, but happens consistently
now on two different Apple Mac cards (RV730, DCE-3, Apple iMac and
Evergreen JUNIPER, DCE-4 in a Apple MacPro). It also doesn't happen
at each interrupt but only occassionally every couple of
hundred or thousand vblank interrupts.

This results in XOrg warning messages like

"[  7084.472] (WW) RADEON(0): radeon_dri2_flip_event_handler:
Pageflip completion event has impossible msc 420120 < target_msc 420121"

as well as skipped frames and problems for applications that
use kms pageflip events or vblank events, e.g., users of DRI2 and
DRI3/Present, Waylands Weston compositor, etc. See also

https://bugs.freedesktop.org/show_bug.cgi?id=85203

After some talking to Alex and Michel, we decided to fix this
by turning the double-check for asserted irq status bits into a
warning. Whenever a irq event is queued in the IH ring, always
execute the corresponding interrupt handler. Still check the irq
status bits, but only to log a DRM_DEBUG message on a mismatch.

This fixed the problems reliably on both previously failing
cards, RV-730 dual-head tested on both crtcs (pipes D1 and D2)
and a triple-output Juniper HD-5770 card tested on all three
available crtcs (D1/D2/D3). The r600 and evergreen irq handling
is therefore tested, but the cik an si handling is only compile
tested due to lack of hw.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
CC: Michel Dänzer <michel.daenzer@amd.com>
CC: Alex Deucher <alexander.deucher@amd.com>
CC: <stable@vger.kernel.org> # v3.16+
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since

commit 8c7b5ccb
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Tue Apr 21 17:13:19 2015 +0300

    drm/i915: Use atomic helpers for computing changed flags

we compute the plane state for a modeset before actually committing
any changes, which means crtc->active won't be correct yet. Looking at
future work in the modeset conversion targetting 4.3 the only places
where crtc_state->active isn't accurate is when disabling other CRTCs
than the one the modeset is for (when stealing connectors). Which
isn't the case here. And that's also confirmed by an audit, we do
unconditionally update crtc_state->active for the current pipe.

We also don't need to update any other plane check functions since we
only ever add the primary state to the modeset update right now.

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This was lost in

commit ce22dba9
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Tue Apr 21 17:12:56 2015 +0300

    drm/i915: Move toggling planes out of crtc enable/disable.

and we still need that crtc->active check since the overall modeset
flow doesn't yet take dpms state into account properly. Fixes WARNING
backtraces on at least bdw/hsw due to the ips disabling code being
upset about being run on a switched-off pipe.

We don't need a corresponding change on the enable side since with the
old setCrtc semantics we always force-enable the pipe after a modeset.
And the dpms function intel_crtc_control already checks for ->active.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When rotated and partial views were added no one spotted the resume
path which assumes only one GGTT VMA per object and hence is now
skipping rebind of alternative views.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Ville noticed that the PLL HW readout code parsed the fractional
divider value as if the fractional divider was always enabled. This may
result in a port clock state check mismatch if the preceeding modeset
disabled the fractional divider, but left a non-zero divider value in
the register.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The length of each EDID block is EDID_LENGTH, and number of blocks is
(1 + edid->extensions) - we need to multiply not add them.

This causes wrong EDID to be passed on, and is a regression introduced
by d2ed3436 (drm: Introduce helper for replacing blob properties)
Signed-off-by: NShixin Zeng <zeng.shixin@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
[danvet: Add Cc: and fix commit summary.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

use mm.h definition

Cc: David Airlie <airlied@linux.ie>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

align_pitch() uses ALIGN() to ensure the pitch is aligned to SGX's
requirement of 8 pixels. However, ALIGN() expects the alignment value to
be a power of two, which is not the case for 24 bits per pixels.

Use roundup() instead, which works for all alignments.

This fixes the error seen with 24 bits per pixel modes:

"buffer pitch (2176 bytes) is not a multiple of pixel size (3 bytes)"
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

If tiler_unpin() call in omap_gem_put_paddr() fails,
omap_gem_put_paddr() will immediately stop processing and return an
error.

This patch remoes that error checking, and also removes
omap_gem_put_paddr()'s return value, because:

 * The caller of omap_gem_put_paddr() can do nothing if an error
   happens, so it's pointless to return an error value

 * If tiler_unpin() fails, the GEM object will possibly be left in an
   undefined state, where the DMM mapping may have been removed, but the
   GEM object still thinks everything is as it should be, leading to
   crashes later.

 * There's no point in returning an error from a "free" call, as the
   caller can do nothing about it. So it's better to clean up as much as
   possible.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

omap_framebuffer_unpin() check the return value of omap_gem_put_paddr()
and return immediately if omap_gem_put_paddr() fails.

This patch removes the check for the return value, and also removes the
return value of omap_framebuffer_unpin(), because:

 * Nothing checks the return value of omap_framebuffer_unpin(), and even
   something did check it, there's nothing the caller can do to handle
   the error.

 * If a omap_gem_put_paddr() fails, the framebuffer's other planes will
   be left unreleased. So it's better to call omap_gem_put_paddr() for
   all the planes, even if one would fail.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The DMM driver uses a timeout of 1 ms to wait for DMM transaction to
finish. While DMM should always finish the operation within that time,
the timeout is rather strict. Small misbehavior of the system (e.g. an
irq taking too long) could trigger the timeout.

As the DMM is a critical piece of code for display memory management,
let's increase the timeout to 100 ms so that we are less likely to fail
a memory allocation in case of system misbehaviors. 100 ms is just a
guess of a reasonably large timeout. The HW should accomplish the task
in less than 1 ms.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

DRM allows planes to be partially off-screen, but DSS hardware does not.
This patch adds the necessary check to reject plane configs if the plane
is not fully inside the crtc.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Use kvfree() instead of open-coding it.
Signed-off-by: NPekka Enberg <penberg@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Similarly to what is done for SKL, clear the dpll_hw_state of the pipe
config in hsw_dp_set_ddi_pll_sel(), since it main contain stale values.
That can happen if a crtc that was previously driving an HDMI connector
switches to a DP connector. In that case, the wrpll field was left with
its old value, leading to warnings like the one below:

[drm:check_crtc_state [i915]] *ERROR* mismatch in dpll_hw_state.wrpll (expected 0xb035061f, found 0x00000000)
------------[ cut here ]------------
WARNING: CPU: 1 PID: 767 at drivers/gpu/drm/i915/intel_display.c:12324 check_crtc_state+0x975/0x10b0 [i915]()
pipe state doesn't match!

This regression was indroduced in

commit dd3cd74a
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Fri May 15 13:34:29 2015 +0300

    drm/i915: Don't overwrite (e)DP PLL selection on SKL
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Tested-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Avoids a crash on pre-DP asics that support HDMI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

v2: remove unrelated whitespace change, fix C comment
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>