提交 8c7b5ccb 编写于 作者: A Ander Conselvan de Oliveira 提交者: Daniel Vetter

drm/i915: Use atomic helpers for computing changed flags

Replace the drivers own logic for computing mode_changed, active_changed
and planes_changed flags with the check_modeset() atomic helper. Since
that function needs to compare the crtc's new mode with the current,
this patch also moves the set up of crtc_state->mode earlier in the call
chain.

Note that for the call to check_plane() to work properly, we need to
check new plane state against new crtc state. But since we still use the
plane update helper, which doesn't have a full atomic state, we need to
hack around that in intel_plane_atomic_check().
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 840bfe95
......@@ -111,6 +111,7 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
{
struct drm_crtc *crtc = state->crtc;
struct intel_crtc *intel_crtc;
struct intel_crtc_state *crtc_state;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_plane_state *intel_state = to_intel_plane_state(state);
......@@ -126,6 +127,17 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
if (!crtc)
return 0;
/* FIXME: temporary hack necessary while we still use the plane update
* helper. */
if (state->state) {
crtc_state =
intel_atomic_get_crtc_state(state->state, intel_crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
} else {
crtc_state = intel_crtc->config;
}
/*
* The original src/dest coordinates are stored in state->base, but
* we want to keep another copy internal to our driver that we can
......@@ -144,9 +156,9 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
intel_state->clip.x1 = 0;
intel_state->clip.y1 = 0;
intel_state->clip.x2 =
intel_crtc->active ? intel_crtc->config->pipe_src_w : 0;
crtc_state->base.active ? crtc_state->pipe_src_w : 0;
intel_state->clip.y2 =
intel_crtc->active ? intel_crtc->config->pipe_src_h : 0;
crtc_state->base.active ? crtc_state->pipe_src_h : 0;
/*
* Disabling a plane is always okay; we just need to update
......
......@@ -82,7 +82,7 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
static void ironlake_pch_clock_get(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
static int intel_set_mode(struct drm_crtc *crtc,
struct drm_atomic_state *state);
static int intel_framebuffer_init(struct drm_device *dev,
struct intel_framebuffer *ifb,
......@@ -9892,7 +9892,9 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector,
if (ret)
goto fail;
if (intel_set_mode(crtc, mode, state)) {
drm_mode_copy(&crtc_state->base.mode, mode);
if (intel_set_mode(crtc, state)) {
DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
if (old->release_fb)
old->release_fb->funcs->destroy(old->release_fb);
......@@ -9966,7 +9968,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
if (ret)
goto fail;
intel_set_mode(crtc, NULL, state);
intel_set_mode(crtc, state);
drm_atomic_state_free(state);
......@@ -11476,7 +11478,6 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
static int
intel_modeset_pipe_config(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_atomic_state *state,
struct intel_crtc_state *pipe_config)
{
......@@ -11499,10 +11500,6 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
clear_intel_crtc_state(pipe_config);
pipe_config->base.crtc = crtc;
drm_mode_copy(&pipe_config->base.adjusted_mode, mode);
drm_mode_copy(&pipe_config->base.mode, mode);
pipe_config->cpu_transcoder =
(enum transcoder) to_intel_crtc(crtc)->pipe;
pipe_config->shared_dpll = DPLL_ID_PRIVATE;
......@@ -12199,27 +12196,8 @@ static void update_scanline_offset(struct intel_crtc *crtc)
crtc->scanline_offset = 1;
}
static void
intel_atomic_modeset_compute_changed_flags(struct drm_atomic_state *state,
struct drm_crtc *modeset_crtc)
{
struct drm_crtc_state *crtc_state;
struct drm_crtc *crtc;
int i;
for_each_crtc_in_state(state, crtc, crtc_state, i) {
if (crtc_state->enable != crtc->state->enable)
crtc_state->mode_changed = true;
/* FIXME: Do we need to always set mode_changed for
* modeset_crtc if it is enabled? modeset_affect_pipes()
* did that. */
}
}
static struct intel_crtc_state *
intel_modeset_compute_config(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_atomic_state *state)
{
struct intel_crtc_state *pipe_config;
......@@ -12229,7 +12207,9 @@ intel_modeset_compute_config(struct drm_crtc *crtc,
if (ret)
return ERR_PTR(ret);
intel_atomic_modeset_compute_changed_flags(state, crtc);
ret = drm_atomic_helper_check_modeset(state->dev, state);
if (ret)
return ERR_PTR(ret);
/*
* Note this needs changes when we start tracking multiple modes
......@@ -12244,7 +12224,7 @@ intel_modeset_compute_config(struct drm_crtc *crtc,
if (!pipe_config->base.enable)
return pipe_config;
ret = intel_modeset_pipe_config(crtc, mode, state, pipe_config);
ret = intel_modeset_pipe_config(crtc, state, pipe_config);
if (ret)
return ERR_PTR(ret);
......@@ -12262,6 +12242,10 @@ intel_modeset_compute_config(struct drm_crtc *crtc,
intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,"[modeset]");
ret = drm_atomic_helper_check_planes(state->dev, state);
if (ret)
return ERR_PTR(ret);
return pipe_config;
}
......@@ -12337,7 +12321,6 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
}
static int __intel_set_mode(struct drm_crtc *modeset_crtc,
struct drm_display_mode *mode,
struct intel_crtc_state *pipe_config)
{
struct drm_device *dev = modeset_crtc->dev;
......@@ -12380,7 +12363,7 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
* single crtc and mode.
*/
if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) {
modeset_crtc->mode = *mode;
modeset_crtc->mode = pipe_config->base.mode;
/* mode_set/enable/disable functions rely on a correct pipe
* config. */
intel_crtc_set_state(to_intel_crtc(modeset_crtc), pipe_config);
......@@ -12446,12 +12429,11 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
}
static int intel_set_mode_with_config(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct intel_crtc_state *pipe_config)
{
int ret;
ret = __intel_set_mode(crtc, mode, pipe_config);
ret = __intel_set_mode(crtc, pipe_config);
if (ret == 0)
intel_modeset_check_state(crtc->dev);
......@@ -12460,19 +12442,18 @@ static int intel_set_mode_with_config(struct drm_crtc *crtc,
}
static int intel_set_mode(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_atomic_state *state)
{
struct intel_crtc_state *pipe_config;
int ret = 0;
pipe_config = intel_modeset_compute_config(crtc, mode, state);
pipe_config = intel_modeset_compute_config(crtc, state);
if (IS_ERR(pipe_config)) {
ret = PTR_ERR(pipe_config);
goto out;
}
ret = intel_set_mode_with_config(crtc, mode, pipe_config);
ret = intel_set_mode_with_config(crtc, pipe_config);
if (ret)
goto out;
......@@ -12539,125 +12520,21 @@ void intel_crtc_restore_mode(struct drm_crtc *crtc)
}
crtc_state->base.enable = intel_crtc->new_enabled;
if (&intel_crtc->base == crtc)
drm_mode_copy(&crtc_state->base.mode, &crtc->mode);
}
intel_modeset_setup_plane_state(state, crtc, &crtc->mode,
crtc->primary->fb, crtc->x, crtc->y);
intel_set_mode(crtc, &crtc->mode, state);
intel_set_mode(crtc, state);
drm_atomic_state_free(state);
}
#undef for_each_intel_crtc_masked
static bool
is_crtc_connector_off(struct drm_mode_set *set)
{
int i;
if (set->num_connectors == 0)
return false;
if (WARN_ON(set->connectors == NULL))
return false;
for (i = 0; i < set->num_connectors; i++)
if (set->connectors[i]->encoder &&
set->connectors[i]->encoder->crtc == set->crtc &&
set->connectors[i]->dpms != DRM_MODE_DPMS_ON)
return true;
return false;
}
static void
intel_set_config_compute_mode_changes(struct drm_mode_set *set,
struct intel_crtc_state *pipe_config)
{
struct drm_atomic_state *state;
struct drm_connector *connector;
struct drm_connector_state *connector_state;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int i;
/* We should be able to check here if the fb has the same properties
* and then just flip_or_move it */
if (is_crtc_connector_off(set)) {
pipe_config->base.mode_changed = true;
} else if (set->crtc->primary->fb != set->fb) {
/*
* If we have no fb, we can only flip as long as the crtc is
* active, otherwise we need a full mode set. The crtc may
* be active if we've only disabled the primary plane, or
* in fastboot situations.
*/
if (set->crtc->primary->fb == NULL) {
struct intel_crtc *intel_crtc =
to_intel_crtc(set->crtc);
if (intel_crtc->active) {
DRM_DEBUG_KMS("crtc has no fb, will flip\n");
pipe_config->base.planes_changed = true;
} else {
DRM_DEBUG_KMS("inactive crtc, full mode set\n");
pipe_config->base.mode_changed = true;
}
} else if (set->fb == NULL) {
pipe_config->base.mode_changed = true;
} else if (set->fb->pixel_format !=
set->crtc->primary->fb->pixel_format) {
pipe_config->base.mode_changed = true;
} else {
pipe_config->base.planes_changed = true;
}
}
if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
pipe_config->base.planes_changed = true;
if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
DRM_DEBUG_KMS("modes are different, full mode set\n");
drm_mode_debug_printmodeline(&set->crtc->mode);
drm_mode_debug_printmodeline(set->mode);
pipe_config->base.mode_changed = true;
}
state = pipe_config->base.state;
for_each_connector_in_state(state, connector, connector_state, i) {
if (connector_state->best_encoder !=
connector->state->best_encoder) {
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] encoder changed, full mode switch\n",
connector->base.id,
connector->name);
pipe_config->base.mode_changed = true;
}
if (connector_state->crtc != connector->state->crtc) {
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] crtc changed, full mode switch\n",
connector->base.id,
connector->name);
pipe_config->base.mode_changed = true;
}
}
for_each_crtc_in_state(state, crtc, crtc_state, i) {
if (crtc_state->enable == crtc->state->enable)
continue;
DRM_DEBUG_KMS("[CRTC:%d] %sabled, full mode switch\n",
crtc->base.id,
crtc_state->enable ? "en" : "dis");
pipe_config->base.mode_changed = true;
}
DRM_DEBUG_KMS("computed changes for [CRTC:%d], mode_changed=%d, fb_changed=%d\n",
set->crtc->base.id, pipe_config->base.mode_changed,
pipe_config->base.planes_changed);
}
static bool intel_connector_in_mode_set(struct intel_connector *connector,
struct drm_mode_set *set)
{
......@@ -12774,6 +12651,21 @@ intel_modeset_stage_output_state(struct drm_device *dev,
crtc_state->enable = drm_atomic_connectors_for_crtc(state, crtc);
}
ret = intel_modeset_setup_plane_state(state, set->crtc, set->mode,
set->fb, set->x, set->y);
if (ret)
return ret;
crtc_state = drm_atomic_get_crtc_state(state, set->crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
if (set->mode)
drm_mode_copy(&crtc_state->mode, set->mode);
if (set->num_connectors)
crtc_state->active = true;
return 0;
}
......@@ -12821,30 +12713,17 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
if (ret)
goto out;
ret = intel_modeset_setup_plane_state(state, set->crtc, set->mode,
set->fb, set->x, set->y);
if (ret)
goto out;
pipe_config = intel_modeset_compute_config(set->crtc, set->mode,
state);
pipe_config = intel_modeset_compute_config(set->crtc, state);
if (IS_ERR(pipe_config)) {
ret = PTR_ERR(pipe_config);
goto out;
}
/* Compute whether we need a full modeset, only an fb base update or no
* change at all. In the future we might also check whether only the
* mode changed, e.g. for LVDS where we only change the panel fitter in
* such cases. */
intel_set_config_compute_mode_changes(set, pipe_config);
intel_update_pipe_size(to_intel_crtc(set->crtc));
primary_plane_was_visible = primary_plane_visible(set->crtc);
ret = intel_set_mode_with_config(set->crtc, set->mode,
pipe_config);
ret = intel_set_mode_with_config(set->crtc, pipe_config);
if (ret == 0 &&
pipe_config->base.enable &&
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册