- 27 7月, 2010 3 次提交
-
-
由 Ralf Baechle 提交于
WARNING: drivers/video/built-in.o(.data+0x1e0): Section mismatch in reference fr om the variable pmagbafb_driver to the function .init.text:pmagbafb_probe() The variable pmagbafb_driver references the function __init pmagbafb_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing this one triggers 2 more: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_fix. If pmagbafb_fix is only used by pmagbafb_probe then annotate pmagbafb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x108): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_defined The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_defined. If pmagbafb_defined is only used by pmagbafb_probe then annotate pmagbafb_defined with a matching annotation. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
WARNING: drivers/net/built-in.o(.data+0x24): Section mismatch in reference from the variable dec_lance_tc_driver to the function .init.text:dec_lance_tc_probe() The variable dec_lance_tc_driver references the function __init dec_lance_tc_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing this one results in a new mismatch: WARNING: drivers/net/built-in.o(.devinit.text+0x14): Section mismatch in reference from the function dec_lance_tc_probe() to the function .init.text:dec_lance_probe() The function __devinit dec_lance_tc_probe() references a function __init dec_lance_probe(). If dec_lance_probe is only used by dec_lance_tc_probe then annotate dec_lance_probe with a matching annotation. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 24 7月, 2010 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: vmlinux.lds: fix .data..init_task output section (fix popwerpc boot) powerpc: Fix erroneous lmb->memblock conversions powerpc/mm: Add some debug output when hash insertion fails powerpc/mm: Fix bugs in huge page hashing powerpc/mm: Move around testing of _PAGE_PRESENT in hash code powerpc/mm: Handle hypervisor pte insert failure in __hash_page_huge powerpc/kexec: Fix boundary case for book-e kexec memory limits
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: nconfig: Fix segfault when help contains special characters kbuild: Fix make rpm kbuild: Make the setlocalversion script POSIX-compliant
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available perf annotate: Fix handling of goto labels that are valid hex numbers tracing: Properly align linker defined symbols perf symbols: Fix directory descriptor leaking perf: Fix various display bugs with parent filtering
-
- 23 7月, 2010 18 次提交
-
-
由 Stephen Boyd 提交于
nconfig segfaults when help text contains the character '%'. For a quick example, navigate to the kernel compression options and get the help for bzip2. Doing so triggers a call to mvwprintw() with a string containing '%' and no extra arguments to fill in the specifier's value. Fix this case by printing the literal string retrieved from the kconfig. #0 0x00002b52b6b11d83 in vfprintf () from /lib/libc.so.6 #1 0x00002b52b6bad010 in __vsnprintf_chk () from /lib/libc.so.6 #2 0x00002b52b623991b in _nc_printf_string () from /lib/libncursesw.so.5 #3 0x00002b52b6234cff in vwprintw () from /lib/libncursesw.so.5 #4 0x00002b52b6234db9 in mvwprintw () from /lib/libncursesw.so.5 #5 0x00000000004151d8 in fill_window (win=0x21b64c0, text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression ratio and speed is intermediate.\nDecompression speed is slowest among the three. The kernel\nsize is about 10% smaller with bzip2, in comparison to gzip.\nBzip2 us"...) at scripts/kconfig/nconf.gui.c:229 #6 0x0000000000416335 in show_scroll_win (main_window=0x21a5630, title=0x157fa30 "Bzip2", text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression ratio and speed is intermediate.\nDecompression speed is slowest among the three. The kernel\nsize is about 10% smaller with bzip2, in comparison to gzip.\nBzip2 us"...) at scripts/kconfig/nconf.gui.c:535 #7 0x00000000004055b2 in show_help (menu=0x157f9d0) at scripts/kconfig/nconf.c:1257 #8 0x0000000000405897 in conf_choice (menu=0x157f130) at scripts/kconfig/nconf.c:1321 #9 0x0000000000405326 in conf (menu=0x157d130) at scripts/kconfig/nconf.c:1208 #10 0x00000000004052e8 in conf (menu=0xb434a0) at scripts/kconfig/nconf.c:1203 #11 0x0000000000406092 in main (ac=2, av=0x7fff96a93c38) Cc: Michal Marek <mmarek@suse.cz> Cc: Nir Tzachar <nir.tzachar@gmail.com> Signed-off-by: NStephen Boyd <bebarino@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Benjamin Herrenschmidt 提交于
-
由 Sam Ravnborg 提交于
The .data..init_task output section was missing a load offset causing a popwerpc target to fail to boot. Sean MacLennan tracked it down to the definition of INIT_TASK_DATA_SECTION(). There are only two users of INIT_TASK_DATA_SECTION() in the kernel today: cris and popwerpc. cris do not support relocatable kernels and is thus not impacted by this change. Fix INIT_TASK_DATA_SECTION() to specify load offset like all other output sections. Reported-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Oooops... we missed these. We incorrectly converted strings used when parsing the device-tree on pseries, thus breaking access to drconf memory and hotplug memory. While at it, also revert some variable names that represent something the FW calls "lmb" and thus don't need to be converted to "memblock". Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> ---
-
由 Benjamin Herrenschmidt 提交于
This adds some debug output to our MMU hash code to print out some useful debug data if the hypervisor refuses the insertion (which should normally never happen). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> ---
-
由 Benjamin Herrenschmidt 提交于
There's a couple of nasty bugs lurking in our huge page hashing code. First, we don't check the access permission atomically with setting the _PAGE_BUSY bit, which means that the PTE value we end up using for the hashing might be different than the one we have checked the access permissions for. We've seen cases where that leads us to try to use an invalidated PTE for hashing, causing all sort of "interesting" issues. Then, we also failed to set _PAGE_DIRTY on a write access. Finally, a minor tweak but we should return 0 when we find the PTE busy, in order to just re-execute the access, rather than 1 which means going to do_page_fault(). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> ---
-
由 Benjamin Herrenschmidt 提交于
Instead of adding _PAGE_PRESENT to the access permission mask in each low level routine independently, we add it once from hash_page(). We also move the preliminary access check (the racy one before the PTE is locked) up so it applies to the huge page case. This duplicates code in __hash_page_huge() which we'll remove in a subsequent patch to fix a race in there. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
If the hypervisor gives us an error on a hugepage insert we panic. The normal page code already handles this by returning an error instead and we end calling low_hash_fault which will just kill the task if possible. The patch below does a similar thing for the hugepage case. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Conny Seidel 提交于
make version 3.80 doesn't support "else ifdef" on the same line, also it doesn't support unindented nested constructs. Build fails with: Makefile:608: Extraneous text after `else' directive Makefile:611: *** only one `else' per conditional. Stop. This patch fixes the build for make 3.80. Cc: Ingo Molnar <mingo@elte.hu>, Cc: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <1278430783-17259-1-git-send-email-conny.seidel@amd.com> Signed-off-by: NConny Seidel <conny.seidel@amd.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - relax capability ID checks on newer hardware Input: twl40300-keypad - fix handling of "all ground" rows Input: gamecon - reference correct pad in gc_psx_command() Input: gamecon - reference correct input device in NES mode Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi' Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table Input: qt2160 - rename kconfig symbol name
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add quirk to make HP DV5000 laptop resume drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl Fix ttm_page_alloc.c build breakage drm/radeon/kms: fix legacy LVDS dpms sequence drm/radeon/kms: drop taking lock around crtc lookup.
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: talitos - fix bug in sg_copy_end_to_buffer
-
由 Linus Torvalds 提交于
Merge branch 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: x86: auditsyscall: fix fastpath return value after reschedule
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function debug_core,kdb: fix kgdb_connected bit set in the wrong place Fix merge regression from external kdb to upstream kdb repair gdbstub to match the gdbserial protocol specification kdb: break out of kdb_ll() when command is terminated
-
由 Kumar Gala 提交于
The KEXEC_*_MEMORY_LIMITs are inclusive addresses. We define them as 2Gs as that is what we allow mapping via TLBs. However, this should be 2G - 1 to be inclusive, otherwise if we have >2G of memory in a system we fail to boot properly via kexec. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Arnaldo Carvalho de Melo 提交于
When parsing the objdump disassembly output we can have goto labels that are valid hex numbers and thus get confused with lines with machine code. Handle the common case of a label that has nothing after it and other cases where there is just source code by validating the resulting "ip". It is still possible that we find goto labels that are in the function address range, but only if they are located before the real address we should be OK. A change in the objdump output to have a clear marker separating addresses from the disassembly would come handy, but we would still have to deal with older versions. Reported-by: NGleb Natapov <gleb@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <20100722170541.GF17631@ghostprotocols.net> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 David Howells 提交于
Fix the security problem in the CIFS filesystem DNS lookup code in which a malicious redirect could be installed by a random user by simply adding a result record into one of their keyrings with add_key() and then invoking a CIFS CFS lookup [CVE-2010-2524]. This is done by creating an internal keyring specifically for the caching of DNS lookups. To enforce the use of this keyring, the module init routine creates a set of override credentials with the keyring installed as the thread keyring and instructs request_key() to only install lookup result keys in that keyring. The override is then applied around the call to request_key(). This has some additional benefits when a kernel service uses this module to request a key: (1) The result keys are owned by root, not the user that caused the lookup. (2) The result keys don't pop up in the user's keyrings. (3) The result keys don't come out of the quota of the user that caused the lookup. The keyring can be viewed as root by doing cat /proc/keys: 2a0ca6c3 I----- 1 perm 1f030000 0 0 keyring .dns_resolver: 1/4 It can then be listed with 'keyctl list' by root. # keyctl list 0x2a0ca6c3 1 key in keyring: 726766307: --alswrv 0 0 dns_resolver: foo.bar.com Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com> Acked-by: NSteve French <smfrench@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 7月, 2010 16 次提交
-
-
由 Alex Deucher 提交于
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29062Reported-by: NAndres Cimmarusti <acimmarusti@gmail.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dmitry Torokhov 提交于
Older firmwares fixed the middle byte of the Synaptics capabilities query to 0x47, but starting with firmware 7.5 the middle byte represents submodel ID, sometimes also called "dash number". Reported-and-tested-by: NMiroslav Šulc <fordfrog@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Roland McGrath 提交于
In the CONFIG_AUDITSYSCALL fast-path for x86 64-bit system calls, we can pass a bad return value and/or error indication for the system call to audit_syscall_exit(). This happens when TIF_NEED_RESCHED was set as the system call returned, so we went out to schedule() and came back to the exit-audit fast-path. The fix is to reload the user return value register from the pt_regs before using it for audit_syscall_exit(). Both the 32-bit kernel's fast path and the 64-bit kernel's 32-bit system call fast paths work slightly differently, so that they always leave the fast path entirely to reschedule and don't return there, so they don't have the analogous bugs. Reported-by: NAlexander Viro <aviro@redhat.com> Signed-off-by: NRoland McGrath <roland@redhat.com>
-
由 Jason Wessel 提交于
The kdb code should not toggle the sysrq state in case an end user wants to try and resume the normal kernel execution. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Jason Wessel 提交于
Immediately following an exit from the kdb shell the kgdb_connected variable should be set to zero, unless there are breakpoints planted. If the kgdb_connected variable is not zeroed out with kdb, it is impossible to turn off kdb. This patch is merely a work around for now, the real fix will check for the breakpoints. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
In the process of merging kdb to the mainline, the kdb lsmod command stopped printing the base load address of kernel modules. This is needed for using kdb in conjunction with external tools such as gdb. Simply restore the functionality by adding a kdb_printf for the base load address of the kernel modules. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
The gdbserial protocol handler should return an empty packet instead of an error string when ever it responds to a command it does not implement. The problem cases come from a debugger client sending qTBuffer, qTStatus, qSearch, qSupported. The incorrect response from the gdbstub leads the debugger clients to not function correctly. Recent versions of gdb will not detach correctly as a result of this behavior. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com>
-
由 Martin Hicks 提交于
Without this patch the "ll" linked-list traversal command won't terminate when you hit q/Q. Signed-off-by: NMartin Hicks <mort@sgi.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Alex Deucher 提交于
Return the crtc_id, not the counter value. They are not necessarily the same. Cc: Jerome Glisse <glisse@freedesktop.org> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Luck, Tony 提交于
The commit 1e8655f8 drm/ttm: Fix build on architectures without AGP looks at TTM_HAS_AGP before it has been set in ttm_bo_driver.h Move the conditional inclusion of <asm/agp.h> *after* we have included ttm_bo_driver.h Signed-of-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Add delay after turning off the LVDS encoder. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16389Tested-by: NJan Kreuzer <kontrollator@gmx.de> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
We only add/remove crtcs at driver load, you cannot remove when the GPU is running a CS packet since the fd is open, when GPU hotplugging on radeons actually is needed all this locking needs a review and I've started re-working kms core locking to deal with this better. But for now avoid long delays in CS processing when hotplug detect is happening in a different thread. this fixes a regression introduced with hotplug detection. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix 'driver ... did not release config properly' warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev由 Linus Torvalds 提交于
* 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev: mm: add context argument to shrinker callback to remaining shrinkers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Select wm_hubs automatically for WM8994 ASoC: Remove duplicate AUX definition from WM8776 ASoC:: remove a redundant snd_soc_unregister_codec call in wm8988_register ASoC: wm8727: add a missing return in wm8727_platform_probe ASoC: fsi: fixup wrong value setting order of TDM ASoC: fsi: fixup clock inversion operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: math-emu: correct test for downshifting fraction in _FP_FROM_INT() perf: Add DWARF register lookup for sparc MAINTAINERS: Add SBUS driver path to sparc entry. drivers/sbus: Remove unnecessary casts of private_data sparc: remove homegrown L1_CACHE_ALIGN macro sparc64: fix the build error due to smp_kgdb_capture_client() sparc64: Fix maybe_change_configuration() PCR setting. arch/sparc/kernel: Eliminate what looks like a NULL pointer dereference sparc64: Update defconfig. sunsu: Fix use after free in su_remove(). sunserial: Don't call add_preferred_console() when console= is specified. sparc32: Kill none_mask, it's bogus.
-