As a preparatory step to allow us to allocate early page tables from
unmapped memory using memblock_alloc, add new p??_{set,clear}_fixmap*
functions which can be used to walk page tables outside of the linear
mapping by using fixmap slots.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We currently have __pmd_populate for creating a pmd table entry given
the physical address of a pte, but don't have equivalents for the pud or
pgd levels of table.

To enable us to manipulate tables which are mapped outside of the linear
mapping (where we have a PA, but not a linear map VA), it is useful to
have these functions.

This patch adds __{pud,pgd}_populate. As these should not be called when
the kernel uses folded {pmd,pud}s, in these cases they expand to
BUILD_BUG(). So long as the appropriate checks are made on the {pud,pgd}
entry prior to attempting population, these should be optimized out at
compile time.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

When we "upgrade" to a section mapping, we free any table we made
redundant by giving it back to memblock. To get the PA, we acquire the
physical address and convert this to a VA, then subsequently convert
this back to a PA.

This works currently, but will not work if the tables are not accessed
via linear map VAs (e.g. is we use fixmap slots).

This patch uses {pmd,pud}_page_paddr to acquire the PA. This avoids the
__pa(__va()) round trip, saving some work and avoiding reliance on the
linear mapping.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

To allow us to walk tables allocated into the fixmap, we need to acquire
the physical address of a page, rather than the virtual address in the
linear map.

This patch adds new p??_page_paddr and p??_offset_phys functions to
acquire the physical address of a next-level table, and changes
p??_offset* into macros which simply convert this to a linear map VA.
This renders p??_page_vaddr unused, and hence they are removed.

At the pgd level, a new pgd_offset_raw function is added to find the
relevant PGD entry given the base of a PGD and a virtual address.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

For pmd, pud, and pgd levels of table, functions including p?d_index and
p?d_offset are defined after the p?d_page_vaddr function for the
immediately higher level of table.

The pte functions however are defined much earlier, even though several
rely on the later definition of pmd_page_vaddr. While this isn't
currently a problem as these are macros, it prevents the logical
grouping of later C functions (which cannot rely on prototypes for
functions not yet defined).

Move these definitions after pmd_page_vaddr, for consistency with the
placement of these functions for other levels of table.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The page table modification performed during the KASAN init risks the
allocation of conflicting TLB entries, as it swaps a set of valid global
entries for another without suitable TLB maintenance.

The presence of conflicting TLB entries can result in the delivery of
synchronous TLB conflict aborts, or may result in the use of erroneous
data being returned in response to a TLB lookup. This can affect
explicit data accesses from software as well as translations performed
asynchronously (e.g. as part of page table walks or speculative I-cache
fetches), and can therefore result in a wide variety of problems.

To avoid this, use cpu_replace_ttbr1 to swap the page tables. This
ensures that when the new tables are installed there are no stale
entries from the old tables which may conflict. As all updates are made
to the tables while they are not active, the updates themselves are
safe.

At the same time, add the missing barrier to ensure that the tmp_pg_dir
entries updated via memcpy are visible to the page table walkers at the
point the tmp_pg_dir is installed. All other page table updates made as
part of KASAN initialisation have the requisite barriers due to the use
of the standard page table accessors.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

If page tables are modified without suitable TLB maintenance, the ARM
architecture permits multiple TLB entries to be allocated for the same
VA. When this occurs, it is permitted that TLB conflict aborts are
raised in response to synchronous data/instruction accesses, and/or and
amalgamation of the TLB entries may be used as a result of a TLB lookup.

The presence of conflicting TLB entries may result in a variety of
behaviours detrimental to the system (e.g. erroneous physical addresses
may be used by I-cache fetches and/or page table walks). Some of these
cases may result in unexpected changes of hardware state, and/or result
in the (asynchronous) delivery of SError.

To avoid these issues, we must avoid situations where conflicting
entries may be allocated into TLBs. For user and module mappings we can
follow a strict break-before-make approach, but this cannot work for
modifications to the swapper page tables that cover the kernel text and
data.

Instead, this patch adds code which is intended to be executed from the
idmap, which can safely unmap the swapper page tables as it only
requires the idmap to be active. This enables us to uninstall the active
TTBR1_EL1 entry, invalidate TLBs, then install a new TTBR1_EL1 entry
without potentially unmapping code or data required for the sequence.
This avoids the risk of conflict, but requires that updates are staged
in a copy of the swapper page tables prior to being installed.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In some cases (e.g. when making invasive changes to the kernel page
tables) we will need to execute code from the idmap.

Add a new helper which may be used to install the idmap, complementing
the existing cpu_uninstall_idmap.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

During boot we leave the idmap in place until paging_init, as we
previously had to wait for the zero page to become allocated and
accessible.

Now that we have a statically-allocated zero page, we can uninstall the
idmap much earlier in the boot process, making it far easier to spot
accidental use of physical addresses. This also brings the cold boot
path in line with the secondary boot path.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We currently open-code the removal of the idmap and restoration of the
current task's MMU state in a few places.

Before introducing yet more copies of this sequence, unify these to call
a new helper, cpu_uninstall_idmap.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Currently the zero page is set up in paging_init, and thus we cannot use
the zero page earlier. We use the zero page as a reserved TTBR value
from which no TLB entries may be allocated (e.g. when uninstalling the
idmap). To enable such usage earlier (as may be required for invasive
changes to the kernel page tables), and to minimise the time that the
idmap is active, we need to be able to use the zero page before
paging_init.

This patch follows the example set by x86, by allocating the zero page
at compile time, in .bss. This means that the zero page itself is
available immediately upon entry to start_kernel (as we zero .bss before
this), and also means that the zero page takes up no space in the raw
Image binary. The associated struct page is allocated in bootmem_init,
and remains unavailable until this time.

Outside of arch code, the only users of empty_zero_page assume that the
empty_zero_page symbol refers to the zeroed memory itself, and that
ZERO_PAGE(x) must be used to acquire the associated struct page,
following the example of x86. This patch also brings arm64 inline with
these assumptions.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We pass a size parameter to early_alloc and late_alloc, but these are
only ever used to allocate single pages. In late_alloc we always
allocate a single page.

Both allocators provide us with zeroed pages (such that all entries are
invalid), but we have no barriers between allocating a page and adding
that page to existing (live) tables. A concurrent page table walk may
see stale data, leading to a number of issues.

This patch specialises the two allocators for page tables. The size
parameter is removed and the necessary dsb(ishst) is folded into each.
To make it clear that the functions are intended for use for page table
allocation, they are renamed to {early,late}_pgtable_alloc, with the
related function pointed renamed to pgtable_alloc.

As the dsb(ishst) is now in the allocator, the existing barrier for the
zero page is redundant and thus is removed. The previously missing
include of barrier.h is added.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Currently __set_fixmap_offset is a macro function which has a local
variable called 'addr'. If a caller passes a 'phys' parameter which is
derived from a variable also called 'addr', the local variable will
shadow this, and the compiler will complain about the use of an
uninitialized variable. To avoid the issue with namespace clashes,
'addr' is prefixed with a liberal sprinkling of underscores.

Turning __set_fixmap_offset into a static inline breaks the build for
several architectures. Fixing this properly requires updates to a number
of architectures to make them agree on the prototype of __set_fixmap (it
could be done as a subsequent patch series).
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
[catalin.marinas@arm.com: squashed the original function patch and macro fixup]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Pull char/misc driver fixes from Greg KH:
 "Here are 3 fixes for some reported issues.  Two nvmem driver fixes,
  and one mei fix.  All have been in linux-next just fine"

* tag 'char-misc-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: qfprom: Specify LE device endianness
  nvmem: core: return error for non word aligned access
  mei: validate request value in client notify request ioctl

Pull driver core fix from Greg KH:
 "Here is one driver core, well klist, fix for 4.5-rc4.

  It fixes a problem found in the scsi device list traversal that
  probably also could be triggered by other subsystems.

  The fix has been in linux-next for a while with no reported problems"

* tag 'driver-core-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  klist: fix starting point removed bug in klist iterators

Pull tty/serial fixes from Greg KH:
 "Here are a number of small tty and serial driver fixes for 4.5-rc4
  that resolve some reported issues.

  One of them got reverted as it wasn't correct based on testing, and
  all have been in linux-next for a while"

* tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "8250: uniphier: allow modular build with 8250 console"
  pty: make sure super_block is still valid in final /dev/tty close
  pty: fix possible use after free of tty->driver_data
  tty: Add support for PCIe WCH382 2S multi-IO card
  serial/omap: mark wait_for_xmitr as __maybe_unused
  serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)
  8250: uniphier: allow modular build with 8250 console
  tty: Drop krefs for interrupted tty lock

Pull PHY fixes from Greg KH:
 "Here are a couple of PHY driver fixes for 4.5-rc4.

  A few small phy issues.  All have been in linux-next with no reported
  issues"

* tag 'usb-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload
  phy: twl4030-usb: Relase usb phy on unload
  phy: core: fix wrong err handle for phy_power_on
  phy: Restrict phy-hi6220-usb to HiSilicon arm64

Pull perf tooling fixes from Thomas Gleixner:
 "Another round of fixes for the perf tooling side:

   - Prevent a NULL pointer dereference in tracepoint error handling

   - Fix a thread handling bug in the intel_pt error handling code

   - Search both .eh_frame and .debug_frame sections as toolchains seem
     to have random choices of storing the CFI information

   - Fix the perf state interval output values, which got broken when
     fixing the overall output"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf stat: Fix interval output values
  perf probe: Search both .eh_frame and .debug_frame sections for probe location
  perf tools: Fix thread lifetime related segfaut in intel_pt
  perf tools: tracepoint_error() can receive e=NULL, robustify it

Pull lockdep fix from Thomas Gleixner:
 "A single fix for the stack trace caching logic in lockdep, where the
  duplicate avoidance managed to store no back trace at all"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Fix stack trace caching logic

Pull timer fix from Thomas Gleixner:
 "A single fix preventing a 32bit overflow in timespec/val to cputime
  conversions on 32bit machines"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cputime: Prevent 32bit overflow in time[val|spec]_to_cputime()

Pull irqchip fixes from Thomas Gleixner:
 "Another set of ARM SoC related irqchip fixes:
   - Plug a memory leak in gicv3-its
   - Limit features to the root gic interrupt controller
   - Add a missing barrier in the gic-v3 IAR access
   - Another compile test fix for sun4i"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor
  irqchip/gic: Only set the EOImodeNS bit for the root controller
  irqchip/gic: Only populate set_affinity for the root controller
  irqchip/gicv3-its: Fix memory leak in its_free_tables()
  irqchip/sun4i: Fix compilation outside of arch/arm

Pull x86 fixes from Thomas Gleixner:
 "Two small fixlets for x86:

   - Prevent a KASAN false positive in thread_saved_pc()

   - Fix a 32-bit truncation problem in the x86 numa code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/numa: Fix 32-bit memblock range truncation bug on 32-bit NUMA kernels
  x86: Fix KASAN false positives in thread_saved_pc()

Pull MIPS fixes from Ralf Baechle:
 "Here's the first round of MIPS fixes after the merge window:

   - Detect Octeon III's PCI correctly.
   - Fix return value of the MT7620 probing function.
   - Wire up the copy_file_range syscall.
   - Fix 64k page support on 32 bit kernels.
   - Fix the early Coherency Manager probe.
   - Allow only hardware-supported page sizes to be selected for R6000.
   - Fix corner cases for the RDHWR nstruction emulation on old hardware.
   - Fix FPU handling corner cases.
   - Remove stale entry for BCM33xx from the MAINTAINERS file.
   - 32 and 64 bit ELF headers are different, handle them correctly"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  mips: Differentiate between 32 and 64 bit ELF header
  MIPS: Octeon: Update OCTEON_FEATURE_PCIE for Octeon III
  MIPS: pci-mt7620: Fix return value check in mt7620_pci_probe()
  MIPS: Fix early CM probing
  MIPS: Wire up copy_file_range syscall.
  MIPS: Fix 64k page support for 32 bit kernels.
  MIPS: R6000: Don't allow 64k pages for R6000.
  MIPS: traps.c: Correct microMIPS RDHWR emulation
  MIPS: traps.c: Don't emulate RDHWR in the CpU #0 exception handler
  MAINTAINERS: Remove stale entry for BCM33xx chips
  MIPS: Fix FPU disable with preemption
  MIPS: Properly disable FPU in start_thread()
  MIPS: Fix buffer overflow in syscall_get_arguments()

Pull ARM fixes from Russell King:
 "A couple of ARM fixes from Linus for the ICST clock generator code"

[ "Linus" here is Linus Walleij.  Name-stealer.

       Linus "there can be only one" Torvalds ]

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8519/1: ICST: try other dividends than 1
  ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()

Pull component helper fixes from Russell King:
 "A few fixes for problems people have encountered with the recent
  update to the component helpers"

* 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  component: remove device from master match list on failed add
  component: Detach components when deleting master struct
  component: fix crash on x86_64 with hda audio drivers

Pull more rdma fixes from Doug Ledford:
 "I think we are getting pretty close to done now.  There are four
  one-off fixes in this update:

   - fix ipoib multicast joins
   - fix mlx4 error handling
   - fix mlx5 size computation
   - fix a thinko in core code"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/mlx5: Fix RC transport send queue overhead computation
  IB/ipoib: fix for rare multicast join race condition
  IB/core: Fix reading capability mask of the port info class
  net/mlx4: fix some error handling in mlx4_multi_func_init()

Pull SCSI target fixes from Nicholas Bellinger:
 "This includes the long awaited series to address a set of bugs around
  active I/O remote-port LUN_RESET, as well as properly handling this
  same case with concurrent fabric driver session disconnect ->
  reconnect.

  Note this set of LUN_RESET bug-fixes has been surviving extended
  testing on both v4.5-rc1 and v3.14.y code over the last weeks, and is
  CC'ed for stable as it's something folks using multiple ESX connected
  hosts with slow backends can certainly trigger.

  The highlights also include:

   - Fix WRITE_SAME/DISCARD emulation 4k sector conversion in
     target/iblock (Mike Christie)

   - Fix TMR abort interaction and AIO type TMR response in qla2xxx
     target (Quinn Tran + Swapnil Nagle)

   - Fix >= v3.17 stale descriptor pointer regression in qla2xxx target
     (Quinn Tran)

   - Fix >= v4.5-rc1 return regression with unmap_zeros_data_store new
     configfs store handler (nab)

   - Add CPU affinity flag + convert qla2xxx to use bit (Quinn + HCH +
     Bart)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  qla2xxx: use TARGET_SCF_USE_CPUID flag to indiate CPU Affinity
  target/transport: add flag to indicate CPU Affinity is observed
  target: Fix incorrect unmap_zeroes_data_store return
  qla2xxx: Use ATIO type to send correct tmr response
  qla2xxx: Fix stale pointer access.
  target/user: Fix cast from pointer to phys_addr_t
  target: Drop legacy se_cmd->task_stop_comp + REQUEST_STOP usage
  target: Fix race with SCF_SEND_DELAYED_TAS handling
  target: Fix remote-port TMR ABORT + se_cmd fabric stop
  target: Fix TAS handling for multi-session se_node_acls
  target: Fix LUN_RESET active TMR descriptor handling
  target: Fix LUN_RESET active I/O handling for ACK_KREF
  qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM
  qla2xxx: Fix warning reported by static checker
  target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors

Pull thermal management fixes from Eduardo Valentin:
 "Specifics in this pull request:

   - Compilation fixes on SPEAR, and U8500 thermal drivers.
   - RCAR thermal driver now recognizes OF-thermal based thermal zones.
   - Small code rework on OF-thermal.
   - These change have been CI tested using KernelCI bot [1,2].  \o/

  I am taking over on Rui's behalf while he is out.  Happy New Chinese
  Year!

  [1] - https://kernelci.org/build/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/
  [2] - https://kernelci.org/boot/all/job/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: cpu_cooling: fix out of bounds access in time_in_idle
  thermal: allow u8500-thermal driver to be a module
  thermal: allow spear-thermal driver to be a module
  thermal: spear: use __maybe_unused for PM functions
  thermal: rcar: enable to use thermal-zone on DT
  thermal: of: use for_each_available_child_of_node for child iterator

Pull another sound fix from Takashi Iwai:
 "This contains a fix for the double-free of usb-audio MIDI device at
  probe failure"

* tag 'sound-fix-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: avoid freeing umidi object twice

Pull ARC fixes from Vineet Gupta:
 "I've been sitting on some of these fixes for a while.

   - Corner case of returning to delay slot from interrupt
   - Changing default interrupt prioiry level
   - Kconfig'ize support for super pages
   - Other minor fixes"

* tag 'arc-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: mm: Introduce explicit super page size support
  ARCv2: intc: Allow interruption by lowest priority interrupt
  ARCv2: Check for LL-SC livelock only if LLSC is enabled
  ARC: shrink cpuinfo by not saving full timer BCR
  ARCv2: clocksource: Rename GRTC -> GFRC ...
  ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2

The 'umidi' object will be free'd on the error path by snd_usbmidi_free()
when tearing down the rawmidi interface. So we shouldn't try to free it
in snd_usbmidi_create() after having registered the rawmidi interface.

Found by KASAN.
Signed-off-by: NAndrey Konovalov <andreyknvl@gmail.com>
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pull PCI fixes from Bjorn Helgaas:
 "These are some Renesas binding updates for PCI host controllers, a
  Broadcom fix for a regression we added in v4.5-rc1, and a fix for an
  AER use-after-free problem that can cause memory corruption.

  Summary:

  AER:
    Flush workqueue on device remove to avoid use-after-free (Sebastian Andrzej Siewior)

  Broadcom iProc host bridge driver:
    Allow multiple devices except on PAXC (Ray Jui)

  Renesas R-Car host bridge driver:
    Add gen2 device tree support for r8a7793 (Simon Horman)
    Add device tree support for r8a7793 (Simon Horman)"

* tag 'pci-v4.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: rcar: Add device tree support for r8a7793
  PCI: rcar: Add gen2 device tree support for r8a7793
  PCI: iproc: Allow multiple devices except on PAXC
  PCI/AER: Flush workqueue on device remove to avoid use-after-free

Merge fixes from Andrew Morton:
 "10 fixes"

The lockdep hlist conversion is in the locking tree too, waiting for the
next merge window.  Andrew thought it should go in now.  I'll take it,
since it fixes a real problem and looks trivially correct (famous last
words).

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  arch/x86/Kconfig: CONFIG_X86_UV should depend on CONFIG_EFI
  mm: fix pfn_t vs highmem
  kernel/locking/lockdep.c: convert hash tables to hlists
  mm,thp: fix spellos in describing __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
  mm,thp: khugepaged: call pte flush at the time of collapse
  mm/backing-dev.c: fix error path in wb_init()
  mm, dax: check for pmd_none() after split_huge_pmd()
  vsprintf: kptr_restrict is okay in IRQ when 2
  mm: fix filemap.c kernel doc warning
  ubsan: cosmetic fix to Kconfig text

Fix the RC QPs send queue overhead computation to take into account
two additional segments in the WQE which are needed for registration
operations.

The ATOMIC and UMR segments can't coexist together, so chose maximum out
of them.

The commit 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead
computation") was intended to update RC transport as commit messages
states, but added the code to UC transport.

Fixes: 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead computation")
Signed-off-by: NKamal Heib <kamalh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

A narrow window for race condition still exist between
multicast join thread and *dev_flush workers.
A kernel crash caused by prolong erratic link state changes
was observed (most likely a faulty cabling):

[167275.656270] BUG: unable to handle kernel NULL pointer dereference at
0000000000000020
[167275.665973] IP: [<ffffffffa05f8f2e>] ipoib_mcast_join+0xae/0x1d0 [ib_ipoib]
[167275.674443] PGD 0
[167275.677373] Oops: 0000 [#1] SMP
...
[167275.977530] Call Trace:
[167275.982225]  [<ffffffffa05f92f0>] ? ipoib_mcast_free+0x200/0x200 [ib_ipoib]
[167275.992024]  [<ffffffffa05fa1b7>] ipoib_mcast_join_task+0x2a7/0x490
[ib_ipoib]
[167276.002149]  [<ffffffff8109d5fb>] process_one_work+0x17b/0x470
[167276.010754]  [<ffffffff8109e3cb>] worker_thread+0x11b/0x400
[167276.019088]  [<ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400
[167276.027737]  [<ffffffff810a5aef>] kthread+0xcf/0xe0
Here was a hit spot:
ipoib_mcast_join() {
..............
      rec.qkey      = priv->broadcast->mcmember.qkey;
                                       ^^^^^^^
.....
 }
Proposed patch should prevent multicast join task to continue
if link state change is detected.
Signed-off-by: NAlex Estrin <alex.estrin@intel.com>

Changes from v4:
- as suggested by Doug Ledford, optimized spinlock usage,
i.e. ipoib_mcast_join() is called with lock held.
Changes from v3:
- sync with priv->lock before flag check.
Chages from v2:
- Move check for OPER_UP flag state to mcast_join() to
ensure no event worker is in progress.
- minor style fixes.
Changes from v1:
- No need to lock again if error detected.
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.5 rc4.

  MMC core:
   - Fix an sysfs ABI regression
   - Return an error in a specific error path dealing with mmc ioctls

  MMC host:
   - sdhci-pci|acpi: Fix card detect race for Intel BXT/APL
   - sh_mmcif: Correct TX DMA channel allocation
   - mmc_spi: Fix error handling for dma mapping errors
   - sdhci-of-at91: Fix an unbalance issue for the runtime PM usage count
   - pxamci: Fix the device-tree probe deferral path
   - pxamci: Fix read-only GPIO polarity"

* tag 'mmc-v4.5-rc2' of git://git.linaro.org/people/ulf.hansson/mmc:
  Revert "mmc: block: don't use parameter prefix if built as module"
  mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
  mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
  mmc: sdhci: Allow override of get_cd() called from sdhci_request()
  mmc: sdhci: Allow override of mmc host operations
  mmc: sh_mmcif: Correct TX DMA channel allocation
  mmc: block: return error on failed mmc_blk_get()
  mmc: pxamci: fix the device-tree probe deferral path
  mmc: mmc_spi: add checks for dma mapping error
  mmc: sdhci-of-at91: fix pm runtime unbalanced issue in error path
  mmc: pxamci: fix again read-only gpio detection polarity

Pull sound fixes from Takashi Iwai:
 "In this rc, we've got more volume than previous rc, unsurprisingly;
  the majority of updates in ASoC are about Intel drivers, and another
  major changes are the continued plumbing of ALSA timer bugs revealed
  by syzkaller fuzzer.  Hopefully both settle down now.

  Other than that, HD-audio received a couple of code fixes as well as
  the usual quirks, and various small fixes are found for FireWire
  devices, ASoC codecs and drivers"

* tag 'sound-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (50 commits)
  ASoC: arizona: fref must be limited in pseudo-fractional mode
  ASoC: sigmadsp: Fix missleading return value
  ALSA: timer: Fix race at concurrent reads
  ALSA: firewire-digi00x: Drop bogus const type qualifier on dot_scrt()
  ALSA: hda - Fix bad dereference of jack object
  ALSA: timer: Fix race between stop and interrupt
  ALSA: timer: Fix wrong instance passed to slave callbacks
  ASoC: Intel: Add module tags for common match module
  ASoC: Intel: Load the atom DPCM driver only
  ASoC: Intel: Create independent acpi match module
  ASoC: Intel: Revert "ASoC: Intel: fix ACPI probe regression with Atom DPCM driver"
  ALSA: dummy: Implement timer backend switching more safely
  ALSA: hda - Fix speaker output from VAIO AiO machines
  Revert "ALSA: hda - Fix noise on Gigabyte Z170X mobo"
  ALSA: firewire-tascam: remove needless member for control and status message
  ALSA: firewire-tascam: remove a flag for controller
  ALSA: firewire-tascam: add support for FW-1804
  ALSA: firewire-tascam: fix NULL pointer dereference when model identification fails
  ALSA: hda - Fix static checker warning in patch_hdmi.c
  ASoC: Intel: Skylake: Remove autosuspend delay
  ...

Pull fbdev fixes from Tomi Valkeinen:
 - fix omap2plus_defconfig to enable omapfb as it was in v4.4
 - ocfb: fix timings for margins
 - s6e8ax0, da8xx-fb: fix compile warnings
 - mmp: fix build failure caused by bad printk parameters
 - imxfb: fix clock issue which kept the display off

* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: fbdev: imxfb: Provide a reset mechanism
  fbdev: mmp: print IRQ resource using %pR format string
  fbdev: da8xx-fb: remove incorrect type cast
  fbdev: s6e8ax0: avoid unused function warnings
  ocfb: fix tgdel and tvdel timing parameters
  ARM: omap2plus_defconfig: update display configs

Pull SCSI fixes from James Bottomley:
 "A set of seven fixes:

  Two regressions in the new hisi_sas arm driver, a blacklist entry for
  the marvell console which was causing a reset cascade without it, a
  race fix in the WRITE_SAME/DISCARD routines, a retry fix for the rdac
  driver, without which, it would prematurely return EIO and a couple of
  fixes for the hyper-v storvsc driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  block/sd: Return -EREMOTEIO when WRITE SAME and DISCARD are disabled
  SCSI: Add Marvell Console to VPD blacklist
  scsi_dh_rdac: always retry MODE SELECT on command lock violation
  storvsc: Use the specified target ID in device lookup
  storvsc: Install the storvsc specific timeout handler for FC devices
  hisi_sas: fix v1 hw check for slot error
  hisi_sas: add dependency for HAS_IOMEM