When resetting, phy_state_machine may be accessing the phy through
firmware if the phy is not stopped or disconnected, which will
cause firemware timeout problem because the firmware is busy
processing the reset request.

This patch fixes it by disabling the phy when resetting.

Fixes: b940aeae0ed6 ("net: hns3: never send command queue message to IMP when reset")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When hardware sends the HCLGE_VECTOR0_EVENT_RST event through
hclge_misc_irq_handle, currently driver enables misc_vector in
the interrupt handle, and hardware generates the same interrupt
for the same reset event again and again until the reset is
complete, which causes hclge_reset running repeatly problem.

This patch fixes by enabling the misc_vector after reset is
complete.

Fixes: 4ed340ab ("net: hns3: Add reset process in hclge_main")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When hclge_ae_stop is called during resetting, it will cancel the
service_task by calling cancel_work_sync, which may cause the
service_task to exit without clearing HCLGE_STATE_SERVICE_SCHED
bit. If this happens, the service_task will never run again.

This patch fixes this problem by clearing it after calling
cancel_work_sync in hclge_ae_stop.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for IFF_ALLMULTI flag to HNS3 PF and VF
driver.
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is only 128 entries for hardware's vf vlan table, when
the vf table is full, the firmware will disable the vf vlan
filter and return a resp_code of HCLGE_VF_VLAN_NO_ENTRY to
driver.

This patch checks the if resp_code from firmware is
HCLGE_VF_VLAN_NO_ENTRY, if yes, then print a warning and
return ok to the caller.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Firmware now supports control of all leds. Existing HNS3 driver code
only supported led locate command over SFP Fibre ports. But now it
is also supported over copper port.
This patch removes existing not needed code for the led locate
command and updates the led control command between driver and
firmware.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the previous implementation of led control for fibre port , parses the
port speed configuration, checks the link status and traffic status per
second, and updates the blink status of link led, traffic led and speed
led.

Now, the firmware takes responsibility to handle the led, the dirver just
needs to deal with locate command.

So the codes for link led, traffic led and speed led are useless now. This
patch removes these redundant codes.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before the firmware updates the crq's tail pointer, if the PF driver
reads the data in the crq, the data may be incomplete at this time,
which will lead to the driver read an unknown message.

This patch fixes it by checking if crq is not empty before reading the
message.

Fixes: c1a81619 ("net: hns3: Add mailbox interrupt handling to PF driver")
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HCLGE_PROMISC_TX_EN_B and HCLGE_PROMISC_RX_EN_B are not supported
on pdev revision(0x20), new revision(0x21) supports them.
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HNS3 Hardware can support up to two VLAN tags in transmit leg, the PPP
module can handle the packets based on the tag1 and tag2 config. This
patch adds support for tag2 config for vlan handling
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If CONFIG_ARM_SMMU_V3 is enabled, arm64's dma_ops will replace
arm64_swiotlb_dma_ops with iommu_dma_ops. When releasing contiguous
dma memory, the new ops will call the vunmap function which cannot
be run in interrupt context.

Currently, spin_lock_bh is called before vunmap is executed. This
disables BH and causes the interrupt context to be detected to
generate a kernel panic like below:

[ 2831.573400] kernel BUG at mm/vmalloc.c:1621!
[ 2831.577659] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
...
[ 2831.699907] Process rmmod (pid: 1893, stack limit = 0x0000000055103ee2)
[ 2831.706507] Call trace:
[ 2831.708941]  vunmap+0x48/0x50
[ 2831.711897]  dma_common_free_remap+0x78/0x88
[ 2831.716155]  __iommu_free_attrs+0xa8/0x1c0
[ 2831.720255]  hclge_free_cmd_desc+0xc8/0x118 [hclge]
[ 2831.725128]  hclge_destroy_cmd_queue+0x34/0x68 [hclge]
[ 2831.730261]  hclge_uninit_ae_dev+0x90/0x100 [hclge]
[ 2831.735127]  hnae3_unregister_ae_dev+0xb0/0x868 [hnae3]
[ 2831.740345]  hns3_remove+0x3c/0x90 [hns3]
[ 2831.744344]  pci_device_remove+0x48/0x108
[ 2831.748342]  device_release_driver_internal+0x164/0x200
[ 2831.753553]  driver_detach+0x4c/0x88
[ 2831.757116]  bus_remove_driver+0x60/0xc0
[ 2831.761026]  driver_unregister+0x34/0x60
[ 2831.764935]  pci_unregister_driver+0x30/0xb0
[ 2831.769197]  hns3_exit_module+0x10/0x978 [hns3]
[ 2831.773715]  SyS_delete_module+0x1f8/0x248
[ 2831.777799]  el0_svc_naked+0x30/0x34

This patch fixes it by using spin_lock instead of spin_lock_bh.

Fixes: 68c0a5c7 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support")
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The link status update function is called by timer every second. But
net_stop and net_open may be called with very short intervals. The link
status update function can not detect the link state has changed. It
causes the netdev not running problem.

This patch fixes it by updating the link state in ae_stop function.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch does bit of a clean-up by using already defined enums for
certain values in function hclge_is_special_opcode(). Below enums from
have been used as replacements for magic values:

enum hclge_opcode_type{
	<snip>
	HCLGE_OPC_STATS_64_BIT		= 0x0030,
	HCLGE_OPC_STATS_32_BIT		= 0x0031,
	HCLGE_OPC_STATS_MAC		= 0x0032,
	<snip>
};
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the hns3 driver has been built into kernel and then loaded with
the same driver which built as KLM, it may trigger an error like
below:

[   20.009555] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[   20.016789] hns3: Copyright (c) 2017 Huawei Corporation.
[   20.022100] Error: Driver 'hns3' is already registered, aborting...
[   23.517397] Unable to handle kernel NULL pointer dereference at virtual address 00000000
...
[   23.691583] Process insmod (pid: 1982, stack limit = 0x00000000cd5f21cb)
[   23.698270] Call trace:
[   23.700705]  __list_del_entry_valid+0x2c/0xd8
[   23.705049]  hnae3_unregister_client+0x68/0xa8
[   23.709487]  hns3_init_module+0x98/0x1000 [hns3]
[   23.714093]  do_one_initcall+0x5c/0x170
[   23.717918]  do_init_module+0x64/0x1f4
[   23.721654]  load_module+0x1d14/0x24b0
[   23.725390]  SyS_init_module+0x158/0x208
[   23.729300]  el0_svc_naked+0x30/0x34

This patch fixes it by adding module version info.

Fixes: 38caee9d ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Removes the goto and directly returns in case of errors as part of the
cleanup.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We call pcim_iomap in hclge_pci_init, pcim_iounmap should be called
in error handle of hclge_init_ae_dev.

We call pcim_iomap in hclge_pci_init, but do not call pcim_iounmap in
hclge_pci_uninit. When we remove the hclge.ko and insert it again, a
problem that pci can not map will happen. pcim_iounmap need to be called
in hclge_pci_uninit.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When hclge_ae_start is called, hdev->hw.mac.link may be set
to one after up/down multi-times, which does not correspond to
the link state of netdev when the netdev is up.

This fixes it by setting hdev->hw.mac.link to zero when
hclge_ae_start is called.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When sriov is enabled, the Qset and tc mapping is not longer one
to one relation.

This patch fixes it by mapping all pf and vf's Qset to tc.

Fixes: 84844054 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ae_algo is used by many ae_devs. It is not only belong to just a
ae_dev. Initializing ae_dev failed does not represent registering ae_algo
failed. Because the action of registering ae_algo just is adding ae_algo
to the ae_algo list and it is always is true, it make no sense to define
return type as int.

This patch changes the return type of hnae3_register_ae_algo from int to
void.
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When initializing ae_dev failed during loading hclge.ko, the drvdata will
be set to null. When removing hns3.ko, we get a null ae_dev. It causes the
null pointer problem.

This patch removes pci_set_drvdata from error handle of hclge_init_ae_dev
to fix the bug, since pci_set_drvdata has been called in hns3_remove.
Also, we do not need to uninit the ae_dev which is not initialized. And
it may be the one which is initialized failed.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When hnae3_unregister_ae_algo is called by PF, pci_disable_sriov is
called. And then, hns3_remove is called by VF. We get deadlocked in
this case.

Since VF pci device is dependent on PF pci device, When PF pci device
is removed, VF pci device must be removed. Also, To solve the deadlock
problem, VF pci device should be removed before PF pci device is removed.

This patch moves pci_enable/disable_sriov from hclge to hns3 to solve
the deadlock problem.

Also, we do not need to return EPROBE_DEFER in hnae3_register_ae_dev,
because SRIOV is no longer enabled in the context calling
hnae3_register_ae_dev. Mutex_trylock can be replaced with mutex_lock.

Fixes: 424eb834 ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch refactors the loopback related function in order
to support the serdes loopback.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support of hardware rx-vlan-offload to VF driver.
VF uses mailbox to convey PF to configure the hardware.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because the current statistics for size 8192~12287 are only valid for GE,
the ranges of 8192~9216 and 9217~12287 are valid only for LGE/CGE, and are
always 0 for GE interfaces. it is easy to cause confusion when viewing the
packet statistics using the command ethtool -S.

This patch removes the 8192~12287 range of packet statistics and uses the
8192~9216 and 9217~12287 ranges for statistics. This change depends on the
firmware upgrade.
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two level of vlan tables in hardware, one is port vlan
which is shared by all functions, the other one is function
vlan table, each function has it's own function vlan table.
Currently, PF sets the port vlan table, and vf sets the function
vlan table, which will cause packet lost problem.

This patch fixes this problem by setting both vlan table, and
use hdev->vlan_table to manage thet port vlan table.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If head has invlid value then a dead loop can be triggered in
hclge_cmd_csq_clean. This patch adds sanity check for this case.

Fixes: 68c0a5c7 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd
Interface Support")
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a check to support autoneg(ethtool -A) only when PHY
is attached with the port.

Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility
Layer) Support")
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When phy exists, phy_addr must less than PHY_MAX_ADDR.
If not, hclge_mac_mdio_config should return error.
And for fiber(phy_addr=0xff), it does not need hclge_mac_mdio_config.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes some of the missed error legs in the initialization
function of the ae device. This might cause leaks in case of failure.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer
Support")
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the handling of the check when number of vports
are detected to be more than available TPQs. Current handling causes
an out of bounds access in hclge_map_tqp().

Fixes: 7df7dad6 ("net: hns3: Refactor the mapping of tqp to vport")
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When mac supports DCB, but is in GE mode, it does not support
querying pfc stats, firmware returns error when trying to
query the pfc stats. this creates a lot of noise in the kernel
log when it prints the error log.

This patch fixes it by removing the error log, because it already
return the error to the user space, so the user should be aware of
the error.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IMP will not handle and command queue message any more when it is
in core/global, driver should not send command queue message to
IMP until reinitialize the NIC HW.

This patch checks the status and avoid the message sent to IMP when
reset.
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Default rss_hash_key value should be given to all vports. But just the
PF rss_hash_key has the default value here. This patch adds rss_hash_key
Initialization for all vports.
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: 2bfbd35d ("net: hns3: Changes required in PF mailbox to support VF reset")
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PF needs to assert the VF reset when it receives the request to
reset from VF. After receiving request PF ackknowledges the
request by replying back MBX_ASSERTING_RESET message to VF.
VF then goes to pending state and wait for hardware to complete
the reset.

This patch contains code to handle the received VF message, inform
the VF of assertion and reset the VF using cmdq interface.
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HNS3 drivers enet layer, used for the ring management and stack
interaction, is common to both VF and PF. PF already supports reset
functionality to handle the network stack watchdog timeout trigger
but the existing code is not generic enough to be used to support VF
reset as well.
This patch does following:
1. Makes the existing watchdog timeout handler in enet layer generic
   i.e. suitable for both VF and PF and
2. Introduces the new reset event handler for the VF code.
3. Changes existing reset event handler of PF code to initialize the
   reset level
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for querying speed and duplex by ethtool ethX
to VF.
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixed link mode is returned by hns3_get_link_ksettings. It is
unreasonable.

This patch fixes it by adding some related functions to get link
mode from hardware.
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It may need more time for IMP handle some command, such as reset.
This patch enlarges the max time for cmd timeout.

Driver will check the IMP result every us, it may break through the
loop when get the right result. So not all command need the max time.
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no module that is dependent on hclge or hclgevf's symbol,
but hns_enet need them to provide ops for it to run. When there is
a need to auto load the hns3 driver, the auto load will fail because
hclge or hclgevf is not loaded.

Hns_enet has already exported the pci table, so this patch exports
the pci table for hclge and hclgevf module too.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>