Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 29 3月, 2019 1 次提交
    • X
      bpf: do not restore dst_reg when cur_state is freed · 95d58d96
      由 Xu Yu 提交于 
      commit 0803278b0b4d8eeb2b461fb698785df65a725d9e upstream.

Syzkaller hit 'KASAN: use-after-free Write in sanitize_ptr_alu' bug.

Call trace:

  dump_stack+0xbf/0x12e
  print_address_description+0x6a/0x280
  kasan_report+0x237/0x360
  sanitize_ptr_alu+0x85a/0x8d0
  adjust_ptr_min_max_vals+0x8f2/0x1ca0
  adjust_reg_min_max_vals+0x8ed/0x22e0
  do_check+0x1ca6/0x5d00
  bpf_check+0x9ca/0x2570
  bpf_prog_load+0xc91/0x1030
  __se_sys_bpf+0x61e/0x1f00
  do_syscall_64+0xc8/0x550
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fault injection trace:

  kfree+0xea/0x290
  free_func_state+0x4a/0x60
  free_verifier_state+0x61/0xe0
  push_stack+0x216/0x2f0	          <- inject failslab
  sanitize_ptr_alu+0x2b1/0x8d0
  adjust_ptr_min_max_vals+0x8f2/0x1ca0
  adjust_reg_min_max_vals+0x8ed/0x22e0
  do_check+0x1ca6/0x5d00
  bpf_check+0x9ca/0x2570
  bpf_prog_load+0xc91/0x1030
  __se_sys_bpf+0x61e/0x1f00
  do_syscall_64+0xc8/0x550
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

When kzalloc() fails in push_stack(), free_verifier_state() will free
current verifier state. As push_stack() returns, dst_reg was restored
if ptr_is_dst_reg is false. However, as member of the cur_state,
dst_reg is also freed, and error occurs when dereferencing dst_reg.
Simply fix it by testing ret of push_stack() before restoring dst_reg.

Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: NXu Yu <xuyu@linux.alibaba.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
      95d58d96
  3. 28 3月, 2019 1 次提交
  5. 22 3月, 2019 20 次提交
  7. 19 3月, 2019 18 次提交
    • G
      Linux 4.19.30 · 7794d352
      由 Greg Kroah-Hartman 提交于
      7794d352
    • Z
      vhost/vsock: fix vhost vsock cid hashing inconsistent · 842bdbe8
      由 Zha Bin 提交于 
      commit 7fbe078c37aba3088359c9256c1a1d0c3e39ee81 upstream.

The vsock core only supports 32bit CID, but the Virtio-vsock spec define
CID (dst_cid and src_cid) as u64 and the upper 32bits is reserved as
zero. This inconsistency causes one bug in vhost vsock driver. The
scenarios is:

  0. A hash table (vhost_vsock_hash) is used to map an CID to a vsock
  object. And hash_min() is used to compute the hash key. hash_min() is
  defined as:
  (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)).
  That means the hash algorithm has dependency on the size of macro
  argument 'val'.
  0. In function vhost_vsock_set_cid(), a 64bit CID is passed to
  hash_min() to compute the hash key when inserting a vsock object into
  the hash table.
  0. In function vhost_vsock_get(), a 32bit CID is passed to hash_min()
  to compute the hash key when looking up a vsock for an CID.

Because the different size of the CID, hash_min() returns different hash
key, thus fails to look up the vsock object for an CID.

To fix this bug, we keep CID as u64 in the IOCTLs and virtio message
headers, but explicitly convert u64 to u32 when deal with the hash table
and vsock core.

Fixes: 834e772c8db0 ("vhost/vsock: fix use-after-free in network stack callers")
Link: https://github.com/stefanha/virtio/blob/vsock/trunk/content.texSigned-off-by: NZha Bin <zhabin@linux.alibaba.com>
Reviewed-by: NLiu Jiang <gerry@linux.alibaba.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NShengjing Zhu <i@zhsj.me>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      842bdbe8
    • B
      i40e: report correct statistics when XDP is enabled · 090ce34b
      由 Björn Töpel 提交于 
      commit cdec2141c24ef177d929765c5a6f95549c266fb3 upstream.

When XDP is enabled, the driver will report incorrect
statistics. Received frames will reported as transmitted frames.

This commits fixes the i40e implementation of ndo_get_stats64 (struct
net_device_ops), so that iproute2 will report correct statistics
(e.g. when running "ip -stats link show dev eth0") even when XDP is
enabled.
Reported-by: NJesper Dangaard Brouer <brouer@redhat.com>
Fixes: 74608d17 ("i40e: add support for XDP_TX action")
Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Emeric Brun <ebrun@haproxy.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      090ce34b
    • G
      staging: erofs: fix race when the managed cache is enabled · eab8018f
      由 Gao Xiang 提交于 
      commit 51232df5e4b268936beccde5248f312a316800be upstream.

When the managed cache is enabled, the last reference count
of a workgroup must be used for its workstation.

Otherwise, it could lead to incorrect (un)freezes in
the reclaim path, and it would be harmful.

A typical race as follows:

Thread 1 (In the reclaim path)  Thread 2
workgroup_freeze(grp, 1)                                refcnt = 1
...
workgroup_unfreeze(grp, 1)                              refcnt = 1
                                workgroup_get(grp)      refcnt = 2 (x)
workgroup_put(grp)                                      refcnt = 1 (x)
                                ...unexpected behaviors

* grp is detached but still used, which violates cache-managed
  freeze constraint.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NGao Xiang <gaoxiang25@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      eab8018f
    • N
      drm: Block fb changes for async plane updates · 96ce54b2
      由 Nicholas Kazlauskas 提交于 
      commit 25dc194b34dd5919dd07b8873ee338182e15df9d upstream.

The prepare_fb call always happens on new_plane_state.

The drm_atomic_helper_cleanup_planes checks to see if
plane state pointer has changed when deciding to call cleanup_fb on
either the new_plane_state or the old_plane_state.

For a non-async atomic commit the state pointer is swapped, so this
helper calls prepare_fb on the new_plane_state and cleanup_fb on the
old_plane_state. This makes sense, since we want to prepare the
framebuffer we are going to use and cleanup the the framebuffer we are
no longer using.

For the async atomic update helpers this differs. The async atomic
update helpers perform in-place updates on the existing state. They call
drm_atomic_helper_cleanup_planes but the state pointer is not swapped.
This means that prepare_fb is called on the new_plane_state and
cleanup_fb is called on the new_plane_state (not the old).

In the case where old_plane_state->fb == new_plane_state->fb then
there should be no behavioral difference between an async update
and a non-async commit. But there are issues that arise when
old_plane_state->fb != new_plane_state->fb.

The first is that the new_plane_state->fb is immediately cleaned up
after it has been prepared, so we're using a fb that we shouldn't
be.

The second occurs during a sequence of async atomic updates and
non-async regular atomic commits. Suppose there are two framebuffers
being interleaved in a double-buffering scenario, fb1 and fb2:

- Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2

We call cleanup_fb on fb2 twice in this example scenario, and any
further use will result in use-after-free.

The simple fix to this problem is to block framebuffer changes
in the drm_atomic_helper_async_check function for now.

v2: Move check by itself, add a FIXME (Daniel)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Fixes: fef9df8b ("drm/atomic: initial support for asynchronous plane update")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/275364/Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      96ce54b2
    • X
      It's wrong to add len to sector_nr in raid10 reshape twice · 27143c71
      由 Xiao Ni 提交于 
      commit b761dcf1217760a42f7897c31dcb649f59b2333e upstream.

In reshape_request it already adds len to sector_nr already. It's wrong to add len to
sector_nr again after adding pages to bio. If there is bad block it can't copy one chunk
at a time, it needs to goto read_more. Now the sector_nr is wrong. It can cause data
corruption.

Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      27143c71
    • K
      perf/x86/intel: Make dev_attr_allow_tsx_force_abort static · d6b577c6
      由 kbuild test robot 提交于 
      commit c634dc6bdedeb0b2c750fc611612618a85639ab2 upstream.

Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort")
Signed-off-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: kbuild-all@01.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d6b577c6
    • P
      perf/x86/intel: Fix memory corruption · 92c9a389
      由 Peter Zijlstra 提交于 
      commit ede271b059463731cbd6dffe55ffd70d7dbe8392 upstream.

Through:

  validate_event()
    x86_pmu.get_event_constraints(.idx=-1)
      tfa_get_event_constraints()
        dyn_constraint()

cpuc->constraint_list[-1] is used, which is an obvious out-of-bound access.

In this case, simply skip the TFA constraint code, there is no event
constraint with just PMC3, therefore the code will never result in the
empty set.

Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort")
Reported-by: NTony Jones <tonyj@suse.com>
Reported-by: N"DSouza, Nelson" <nelson.dsouza@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NTony Jones <tonyj@suse.com>
Tested-by: N"DSouza, Nelson" <nelson.dsouza@intel.com>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20190314130705.441549378@infradead.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      92c9a389
    • J
      ALSA: hda/realtek: Enable headset MIC of Acer TravelMate X514-51T with ALC255 · 835bc1e2
      由 Jian-Hong Pan 提交于 
      commit cbc05fd6708c1744ee6a61cb4c461ff956d30524 upstream.

The Acer TravelMate X514-51T with ALC255 cannot detect the headset MIC
until ALC255_FIXUP_ACER_HEADSET_MIC quirk applied.  Although, the
internal DMIC uses another module - snd_soc_skl as the driver.  We still
need the NID 0x1a in the quirk to enable the headset MIC.
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      835bc1e2
    • T
      ALSA: hda/realtek - Reduce click noise on Dell Precision 5820 headphone · be888d9a
      由 Takashi Iwai 提交于 
      commit c0ca5eced22215c1e03e3ad479f8fab0bbb30772 upstream.

Dell Precision 5820 with ALC3234 codec (which is equivalent with
ALC255) shows click noises at (runtime) PM resume on the headphone.
The biggest source of the noise comes from the cleared headphone pin
control at resume, which is done via the standard shutup procedure.

Although we have an override of the standard shutup callback to
replace with NOP, this would skip other needed stuff (e.g. the pull
down of headset power).  So, instead, this "fixes" the behavior of
alc_fixup_no_shutup() by introducing spec->no_shutup_pins flag.
When this flag is set, Realtek codec won't call the standard
snd_hda_shutup_pins() & co.  Now alc_fixup_no_shutup() just sets this
flag instead of overriding spec->shutup callback itself.  This allows
us to apply the similar fix for other entries easily if needed in
future.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      be888d9a
    • J
      ALSA: hda/realtek: Enable audio jacks of ASUS UX362FA with ALC294 · 8f6cf57e
      由 Jian-Hong Pan 提交于 
      commit 8bb37a2a4d7c02affef554f5dc05f6d2e39c31f9 upstream.

The ASUS UX362FA with ALC294 cannot detect the headset MIC and outputs
through the internal speaker and the headphone.  This issue can be fixed
by the quirk in the commit 4e0511067 ALSA: hda/realtek: Enable audio
jacks of ASUS UX533FD with ALC294.

Besides, ASUS UX362FA and UX533FD have the same audio initial pin config
values.  So, this patch replaces SND_PCI_QUIRK of UX533FD with a new
SND_HDA_PIN_QUIRK which benefits both UX362FA and UX533FD.

Fixes: 4e051106730d ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294")
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: NMing Shuo Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8f6cf57e
    • J
      ALSA: hda - add more quirks for HP Z2 G4 and HP Z240 · 5da055b1
      由 Jaroslav Kysela 提交于 
      commit 167897f4b32c2bc18b3b6183029a33fb420a114e upstream.

Apply the HP_MIC_NO_PRESENCE fixups for the more HP Z2 G4 and
HP Z240 models.
Reported-by: NJeff Burrell <jeff.burrell@hp.com>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5da055b1
    • T
      ALSA: hda: Extend i915 component bind timeout · 2191cd58
      由 Takashi Iwai 提交于 
      commit cfc35f9c128cea8fce6a5513b1de50d36f3b209f upstream.

I set 10 seconds for the timeout of the i915 audio component binding
with a hope that recent machines are fast enough to handle all probe
tasks in that period, but I was too optimistic.  The binding may take
longer than that, and this caused a problem on the machine with both
audio and graphics driver modules loaded in parallel, as Paul Menzel
experienced.  This problem haven't hit so often just because the KMS
driver is loaded in initrd on most machines.

As a simple workaround, extend the timeout to 60 seconds.

Fixes: f9b54e19 ("ALSA: hda/i915: Allow delayed i915 audio component binding")
Reported-by: NPaul Menzel <pmenzel+alsa-devel@molgen.mpg.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2191cd58
    • T
      ALSA: firewire-motu: fix construction of PCM frame for capture direction · 8b2d6639
      由 Takashi Sakamoto 提交于 
      commit f97a0944a72b26a2bece72516294e112a890f98a upstream.

In data blocks of common isochronous packet for MOTU devices, PCM
frames are multiplexed in a shape of '24 bit * 4 Audio Pack', described
in IEC 61883-6. The frames are not aligned to quadlet.

For capture PCM substream, ALSA firewire-motu driver constructs PCM
frames by reading data blocks byte-by-byte. However this operation
includes bug for lower byte of the PCM sample. This brings invalid
content of the PCM samples.

This commit fixes the bug.
Reported-by: NPeter Sjöberg <autopeter@gmail.com>
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 4641c939 ("ALSA: firewire-motu: add MOTU specific protocol layer")
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8b2d6639
    • T
      ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against Liquid Saffire 56 · bb2dde7c
      由 Takashi Sakamoto 提交于 
      commit 7dc661bd8d3261053b69e4e2d0050cd1ee540fc1 upstream.

ALSA bebob driver has an entry for Focusrite Saffire Pro 10 I/O. The
entry matches vendor_id in root directory and model_id in unit
directory of configuration ROM for IEEE 1394 bus.

On the other hand, configuration ROM of Focusrite Liquid Saffire 56
has the same vendor_id and model_id. This device is an application of
TCAT Dice (TCD2220 a.k.a Dice Jr.) however ALSA bebob driver can be
bound to it randomly instead of ALSA dice driver. At present, drivers
in ALSA firewire stack can not handle this situation appropriately.

This commit uses more identical mod_alias for Focusrite Saffire Pro 10
I/O in ALSA bebob driver.

$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  042a829d  bus_info_length 4, crc_length 42, crc 33437
404  31333934  bus_name "1394"
408  f0649222  irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100,
               max_rec 9 (1024), max_rom 2, gen 2, spd 2 (S400)
40c  00130e01  company_id 00130e     |
410  000606e0  device_id 01000606e0  | EUI-64 00130e01000606e0

               root directory
               -----------------------------------------------------------------
414  0009d31c  directory_length 9, crc 54044
418  04000014  hardware version
41c  0c0083c0  node capabilities per IEEE 1394
420  0300130e  vendor
424  81000012  --> descriptor leaf at 46c
428  17000006  model
42c  81000016  --> descriptor leaf at 484
430  130120c2  version
434  d1000002  --> unit directory at 43c
438  d4000006  --> dependent info directory at 450

               unit directory at 43c
               -----------------------------------------------------------------
43c  0004707c  directory_length 4, crc 28796
440  1200a02d  specifier id: 1394 TA
444  13010001  version: AV/C
448  17000006  model
44c  81000013  --> descriptor leaf at 498

               dependent info directory at 450
               -----------------------------------------------------------------
450  000637c7  directory_length 6, crc 14279
454  120007f5  specifier id
458  13000001  version
45c  3affffc7  (immediate value)
460  3b100000  (immediate value)
464  3cffffc7  (immediate value)
468  3d600000  (immediate value)

               descriptor leaf at 46c
               -----------------------------------------------------------------
46c  00056f3b  leaf_length 5, crc 28475
470  00000000  textual descriptor
474  00000000  minimal ASCII
478  466f6375  "Focu"
47c  73726974  "srit"
480  65000000  "e"

               descriptor leaf at 484
               -----------------------------------------------------------------
484  0004a165  leaf_length 4, crc 41317
488  00000000  textual descriptor
48c  00000000  minimal ASCII
490  50726f31  "Pro1"
494  30494f00  "0IO"

               descriptor leaf at 498
               -----------------------------------------------------------------
498  0004a165  leaf_length 4, crc 41317
49c  00000000  textual descriptor
4a0  00000000  minimal ASCII
4a4  50726f31  "Pro1"
4a8  30494f00  "0IO"

$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  040442e4  bus_info_length 4, crc_length 4, crc 17124
404  31333934  bus_name "1394"
408  e0ff8112  irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255,
               max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400)
40c  00130e04  company_id 00130e     |
410  018001e9  device_id 04018001e9  | EUI-64 00130e04018001e9

               root directory
               -----------------------------------------------------------------
414  00065612  directory_length 6, crc 22034
418  0300130e  vendor
41c  8100000a  --> descriptor leaf at 444
420  17000006  model
424  8100000e  --> descriptor leaf at 45c
428  0c0087c0  node capabilities per IEEE 1394
42c  d1000001  --> unit directory at 430

               unit directory at 430
               -----------------------------------------------------------------
430  000418a0  directory_length 4, crc 6304
434  1200130e  specifier id
438  13000001  version
43c  17000006  model
440  8100000f  --> descriptor leaf at 47c

               descriptor leaf at 444
               -----------------------------------------------------------------
444  00056f3b  leaf_length 5, crc 28475
448  00000000  textual descriptor
44c  00000000  minimal ASCII
450  466f6375  "Focu"
454  73726974  "srit"
458  65000000  "e"

               descriptor leaf at 45c
               -----------------------------------------------------------------
45c  000762c6  leaf_length 7, crc 25286
460  00000000  textual descriptor
464  00000000  minimal ASCII
468  4c495155  "LIQU"
46c  49445f53  "ID_S"
470  41464649  "AFFI"
474  52455f35  "RE_5"
478  36000000  "6"

               descriptor leaf at 47c
               -----------------------------------------------------------------
47c  000762c6  leaf_length 7, crc 25286
480  00000000  textual descriptor
484  00000000  minimal ASCII
488  4c495155  "LIQU"
48c  49445f53  "ID_S"
490  41464649  "AFFI"
494  52455f35  "RE_5"
498  36000000  "6"

Cc: <stable@vger.kernel.org> # v3.16+
Fixes: 25784ec2 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bb2dde7c
    • P
      perf/x86: Fixup typo in stub functions · a8eae05f
      由 Peter Zijlstra 提交于 
      commit f764c58b7faa26f5714e6907f892abc2bc0de4f8 upstream.

Guenter reported a build warning for CONFIG_CPU_SUP_INTEL=n:

  > With allmodconfig-CONFIG_CPU_SUP_INTEL, this patch results in:
  >
  > In file included from arch/x86/events/amd/core.c:8:0:
  > arch/x86/events/amd/../perf_event.h:1036:45: warning: ‘struct cpu_hw_event’ declared inside parameter list will not be visible outside of this definition or declaration
  >  static inline int intel_cpuc_prepare(struct cpu_hw_event *cpuc, int cpu)

While harmless (an unsed pointer is an unused pointer, no matter the type)
it needs fixing.
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: d01b1f96a82e ("perf/x86/intel: Make cpuc allocations consistent")
Link: http://lkml.kernel.org/r/20190315081410.GR5996@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a8eae05f
    • J
      f2fs: wait on atomic writes to count F2FS_CP_WB_DATA · 2835c059
      由 Jaegeuk Kim 提交于 
      commit 31867b23d7d1ee3535136c6a410a6cf56f666bfc upstream.

Otherwise, we can get wrong counts incurring checkpoint hang.

IO_W (CP:  -24, Data:   24, Flush: (   0    0    1), Discard: (   0    0))

Thread A                        Thread B
- f2fs_write_data_pages
 -  __write_data_page
  - f2fs_submit_page_write
   - inc_page_count(F2FS_WB_DATA)
     type is F2FS_WB_DATA due to file is non-atomic one
- f2fs_ioc_start_atomic_write
 - set_inode_flag(FI_ATOMIC_FILE)
                                - f2fs_write_end_io
                                 - dec_page_count(F2FS_WB_CP_DATA)
                                   type is F2FS_WB_DATA due to file becomes
                                   atomic one

Cc: <stable@vger.kernel.org>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2835c059
    • V
      net: sched: flower: insert new filter to idr after setting its mask · 275a2c08
      由 Vlad Buslov 提交于 
      [ Upstream commit ecb3dea400d3beaf611ce76ac7a51d4230492cf2 ]

When adding new filter to flower classifier, fl_change() inserts it to
handle_idr before initializing filter extensions and assigning it a mask.
Normally this ordering doesn't matter because all flower classifier ops
callbacks assume rtnl lock protection. However, when filter has an action
that doesn't have its kernel module loaded, rtnl lock is released before
call to request_module(). During this time the filter can be accessed bu
concurrent task before its initialization is completed, which can lead to a
crash.

Example case of NULL pointer dereference in concurrent dump:

Task 1                           Task 2

tc_new_tfilter()
 fl_change()
  idr_alloc_u32(fnew)
  fl_set_parms()
   tcf_exts_validate()
    tcf_action_init()
     tcf_action_init_1()
      rtnl_unlock()
      request_module()
      ...                        rtnl_lock()
      				 tc_dump_tfilter()
      				  tcf_chain_dump()
				   fl_walk()
				    idr_get_next_ul()
				    tcf_node_dump()
				     tcf_fill_node()
				      fl_dump()
				       mask = &f->mask->key; <- NULL ptr
      rtnl_lock()

Extension initialization and mask assignment don't depend on fnew->handle
that is allocated by idr_alloc_u32(). Move idr allocation code after action
creation and mask assignment in fl_change() to prevent concurrent access
to not fully initialized filter when rtnl lock is released to load action
module.

Fixes: 01683a14 ("net: sched: refactor flower walk to iterate over idr")
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      275a2c08