Introduce helper functions allowing us to prevent device drivers from
getting any interrupts (without disabling interrupts on the CPU)
during suspend (or hibernation) and to make them start to receive
interrupts again during the subsequent resume.  These functions make it
possible to keep timer interrupts enabled while the "late" suspend and
"early" resume callbacks provided by device drivers are being
executed.  In turn, this allows device drivers' "late" suspend and
"early" resume callbacks to sleep, execute ACPI callbacks etc.

The functions introduced here will be used to rework the handling of
interrupts during suspend (hibernation) and resume.  Namely,
interrupts will only be disabled on the CPU right before suspending
sysdevs, while device drivers will be prevented from receiving
interrupts, with the help of the new helper function, before their
"late" suspend callbacks run (and analogously during resume).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NIngo Molnar <mingo@elte.hu>

The code in the new sq905c.c is based upon the structure of the code in
gspca/sq905.c, and upon the code in libgphoto2/camlibs/digigr8, which supports
the same set of cameras in stillcam mode. I am a co-author of gspca/sq905.c and
I am the sole author of libgphoto2/camlibs/digigr8, which is licensed under the
LGPL. I hereby give myself permission to use my own code from libgphoto2 in
gspca/sq905c.c.
Signed-off-by: NTheodore Kilgore <kilgota@auburn.edu>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The device encodes component video up to 1080i to a MPEG-TS stream with
H.264 video and stereo AAC audio. Newer firmwares accept also AC3
(up to 5.1) audio over optical SPDIF without reencoding.
Firmware upgrade is unimplemeted but rather unimportant since
the firmware sits on a flash chip.

The I2C adapter to drive the integrated infrared receiver/sender is
currently disabled due to a conflict with cx18-based devices.
Tested-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NJanne Grunau <j@jannau.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for the analog functionality in the au8522 analog/digital
demodulator

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.
Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
[mchehab: renamed drivers/media/video/au8522_decoder.c as drivers/media/dvb/frontends/au8522_decoder.c to avoid breaking bisect]
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This addition to the v4l2-api add definitions for the constants and
data structures used for sliced VBI data insertion into MPEG streams triggered
by V4L2_MPEG_STREAM_VBI_FMT_IVTV.  This simply declares what the ivtv and
cx18 drivers and MythTV have already been doing and provides a proper data
structure definition to user space.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As announced VIDIOC_G_CHIP_IDENT_OLD is now removed for 2.6.30.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

changeset 04934e44e3784a1b969582e2d59afcec278470c6 removed the last implementation
that were still using the V4L1 obsoleted header.
Now, video_decoder.h is not used anymore by any driver.

Let's remove it and all references for it in Kernel.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

include/linux/video_encoder.h is not used anymore by a v4l driver.
Let's remove it and its occurences.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is a common feature on many cameras. the options are:
Default colors,
B & W,
Sepia
Signed-off-by: NSergio Aguirre <saaguirre@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The MR97310A is a dual-mode webcam controller that provides compressed BGGR
Bayer frames.  The decompression algorithm for still images is the same as for
video, and is currently implemented in libgphoto2.
Signed-off-by: NKyle Guinn <elyk03@gmail.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Lockdep gripes if file->f_lock is taken in a no-IRQ situation, since that
is not always the case.  We don't really want to disable IRQs for every
acquisition of f_lock; instead, just move it outside of fasync_lock.
Reported-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reported-by: NLarry Finger <Larry.Finger@lwfinger.net>
Reported-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

<linux/irq.h> relies on <linux/gfp.h> and <linux/topology.h> having been
included previous.  If not, the errors like below will result.

    CC      arch/mips/mti-malta/malta-int.o
  In file included from arch/mips/mti-malta/malta-int.c:25:
  include/linux/irq.h: In function ‘init_alloc_desc_masks’:
  include/linux/irq.h:444: error: implicit declaration of function ‘cpu_to_node’
  include/linux/irq.h:446: error: ‘GFP_ATOMIC’ undeclared (first use in this function)
  include/linux/irq.h:446: error: (Each undeclared identifier is reported only once
  include/linux/irq.h:446: error: for each function it appears in.)
  make[3]: *** [arch/mips/mti-malta/malta-int.o] Error 1
  make[2]: *** [arch/mips/mti-malta] Error 2
  make[1]: *** [sub-make] Error 2

Fixed by including the two missing headers.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Annotate struct fs_struct's usage count to indicate the restrictions upon it.
It may not be incremented, except by clone(CLONE_FS), as this affects the
check in check_unsafe_exec() in fs/exec.c.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the Broadcom HT1100 LD chipset (SMBus function.)
Signed-off-by: NFlavio Leitner <fbl@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Waiting for a free bus now accepts the timeout value in jiffies and does
proper checking using time_before.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Add support for the PCA9665 I2C controller.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The MCP78S and MCP79 appear to be compatible with the previous nForce
chips as far as the SMBus controller is concerned. The MCP67 and MCP73
were not tested yet but I'd be very surprised if they weren't
compatible too.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Oleg Ryjkov <olegr@olegr.ca>
Cc: Malcolm Lalkaka <mlalkaka@gmail.com>
Cc: Zbigniew Luszpinski <zbiggy@o2.pl>

The socket_post_accept() hook is not currently used by any in-tree modules
and its existence continues to cause problems by confusing people about
what can be safely accomplished using this hook.  If a legitimate need for
this hook arises in the future it can always be reintroduced.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Add vendor ID for Quanta Microsystems and update the led table with the reported device.
Reported-by: NScott Barnes <nekoreeve@gmail.com>
Signed-off-by: NTulio Magno Quites Machado Filho <tuliom@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The functionality that NL80211_CMD_SET_MGMT_EXTRA_IE provided can now
be achieved with cleaner design by adding IE(s) into
NL80211_CMD_TRIGGER_SCAN, NL80211_CMD_AUTHENTICATE,
NL80211_CMD_ASSOCIATE, NL80211_CMD_DEAUTHENTICATE, and
NL80211_CMD_DISASSOCIATE.

Since this is a very recently added command and there are no known (or
known planned) applications using NL80211_CMD_SET_MGMT_EXTRA_IE and
taken into account how much extra complexity it adds to the IE
processing we have now (and need to add in the future to fix IE order
in couple of frames), it looks like the best option is to just remove
the implementation of this command for now. The enum values themselves
are left to avoid changing the nl80211 command or attribute numbers.
Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch adds new nl80211 commands to allow user space to request
authentication and association (and also deauthentication and
disassociation). The commands are structured to allow separate
authentication and association steps, i.e., the interface between
kernel and user space is similar to the MLME SAP interface in IEEE
802.11 standard and an user space application takes the role of the
SME.

The patch introduces MLME-AUTHENTICATE.request,
MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and
MLME-DISASSOCIATE.request primitives. The authentication and
association commands request the actual operations in two steps
(assuming the driver supports this; if not, separate authentication
step is skipped; this could end up being a separate "connect"
command).

The initial implementation for mac80211 uses the current
net/mac80211/mlme.c for actual sending and processing of management
frames and the new nl80211 commands will just stop the current state
machine from moving automatically from authentication to association.
Future cleanup may move more of the MLME operations into cfg80211.

The goal of this design is to provide more control of authentication and
association process to user space without having to move the full MLME
implementation. This should be enough to allow IEEE 802.11r FT protocol
and 802.11s SAE authentication to be implemented. Obviously, this will
also bring the extra benefit of not having to use WEXT for association
requests with mac80211. An example implementation of a user space SME
using the new nl80211 commands is available for wpa_supplicant.

This patch is enough to get IEEE 802.11r FT protocol working with
over-the-air mechanism (over-the-DS will need additional MLME
primitives for handling the FT Action frames).
Signed-off-by: NJouni Malinen <j@w1.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Add new nl80211 event notifications (and a new multicast group, "mlme")
for informing user space about received and processed Authentication,
(Re)Association Response, Deauthentication, and Disassociation frames in
station and IBSS modes (i.e., MLME SAP interface primitives
MLME-AUTHENTICATE.confirm, MLME-ASSOCIATE.confirm,
MLME-REASSOCIATE.confirm, MLME-DEAUTHENTICATE.indicate, and
MLME-DISASSOCIATE.indication). The event data is encapsulated as the 802.11
management frame since we already have the frame in that format and it
includes all the needed information.

This is the initial step in providing MLME SAP interface for
authentication and association with nl80211. In other words, kernel code
will act as the MLME and a user space application can control it as the
SME.
Signed-off-by: NJouni Malinen <j@w1.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

I keep needing this because I'm too stupid to remember it.
Everybody else can probably remember, but who knows :)
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This makes nl80211 export the supported commands (command groups)
per wiphy so userspace has an idea what it can do -- this will be
required reading for userspace when we introduce auth/assoc /or/
connect for older hardware that cannot separate auth and assoc.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The inline function skb_gro_mac_header defined in include/linux/netdevice.h
makes use of page_address(). Depending on configuration options, the latter
is either defined as a macro or is declared as a function in another header
file, namely include/linux/mm.h. However, include/linux/netdevice.h does not
include include/linux/mm.h.

On MIPS, this has produced the following build error:

  CC      kernel/sysctl_check.o
In file included from include/linux/icmpv6.h:173,
                 from include/linux/ipv6.h:208,
                 from include/net/ip_vs.h:26,
                 from kernel/sysctl_check.c:6:
include/linux/netdevice.h: In function 'skb_gro_mac_header':
include/linux/netdevice.h:1132: error: implicit declaration of function
'page_address'
include/linux/netdevice.h:1133: warning: pointer/integer type mismatch
in conditional expression
make[1]: *** [kernel/sysctl_check.o] Error 1
make: *** [kernel] Error 2

The patch adds the missing include and fixes the build error.
Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

simple_set_mnt() is defined as returning 'int' but always returns 0.
Callers assume simple_set_mnt() never fails and don't properly cleanup if
it were to _ever_ fail.  For instance, get_sb_single() and get_sb_nodev()
should:

        up_write(sb->s_unmount);
        deactivate_super(sb);

if simple_set_mnt() fails.

Since simple_set_mnt() never fails, would be cleaner if it did not
return anything.

[akpm@linux-foundation.org: fix build]
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Move some block device related code out from buffer.c and put it in
block_dev.c. I'm trying to move non-buffer_head code out of buffer.c
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This change will allow for tagging many dentry_operations const in the
source tree.
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

There is a second set of macros for when CONFIG_FILE_LOCKING is
not set. This patch updates those to become inline functions
as well.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This avoids various issues which might give rise to compiler warnings
about missing functions and/or unused variable with the previous
macros. This also fixes a bug where one of the macros was returning
0, but it should have been void.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Tested-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The last user of do_pipe is in arch/alpha/, after replacing it with
do_pipe_flags, the do_pipe can be totally dropped.
Signed-off-by: NCheng Renquan <crquan@gmail.com>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Due to a different size of ino_t ustat needs a compat handler, but
currently only x86 and mips provide one.  Add a generic compat_sys_ustat
and switch all architectures over to it.  Instead of doing various
user copy hacks compat_sys_ustat just reimplements sys_ustat as
it's trivial.  This was suggested by Arnd Bergmann.

Found by Eric Sandeen when running xfstests/017 on ppc64, which causes
stack smashing warnings on RHEL/Fedora due to the too large amount of
data writen by the syscall.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This adds clk_get_sys to get a clock without the associated struct
device.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

* Pass number of bytes instead of sectors to ide_init_sg_cmd().

* Pass number of bytes to process to ide_pio_sector() and rename
  it to ide_pio_bytes().

* Rename ->nsect field to ->nbytes in struct ide_cmd and use
  ->nbytes, ->nleft and ->cursg_ofs to keep track of number of
  bytes instead of sectors.

There should be no functional changes caused by this patch.
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Pass command structure to ide_execute_command() and skip
  __ide_set_handler() for ATAPI protocols on non-DRQ devices.

* Convert ide_issue_pc() to always use ide_execute_command()
  and remove no longer needed ide_execute_pkt_cmd().

v2:
* Fix for non-DRQ devices (based on report from Borislav).

There should be no functional changes caused by this patch.
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Rename dma_timer_expiry() to ide_dma_sff_timer_expiry() and export it.

* Add ->dma_timer_expiry method and use it to set hwif->expiry for
  ATA_PROT_DMA protocol in do_rw_taskfile().

* Initialize ->dma_timer_expiry to ide_dma_sff_timer_expiry() for SFF hosts.

* Move setting hwif->expiry from ide_execute_command() to its users and drop
  'expiry' argument.

* Use ide_execute_command() instead of ->dma_exec_cmd in do_rw_taskfile().

* Remove ->dma_exec_cmd method and its implementations.

* Unexport ide_execute_command() and ide_dma_intr().

v2:
* Fix CONFIG_BLK_DEV_IDEDMA=n build (noticed by Randy Dunlap).

* Fix *dma_expiry naming (suggested by Sergei Shtylyov).

There should be no functional changes caused by this patch.

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>