提交 8e99ada8 编写于 作者: W Wolfram Sang 提交者: Jean Delvare

i2c-algo-pca: Rework waiting for a free bus

Waiting for a free bus now accepts the timeout value in jiffies and does
proper checking using time_before.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
上级 eff9ec95
......@@ -229,7 +229,7 @@ static struct resource i2c_resources[] = {
static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
.gpio = 0,
.i2c_clock_speed = I2C_PCA_CON_330kHz,
.timeout = 100,
.timeout = HZ,
};
static struct platform_device i2c_device = {
......
......@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/i2c.h>
......@@ -186,14 +187,16 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
int numbytes = 0;
int state;
int ret;
int timeout = i2c_adap->timeout;
unsigned long timeout = jiffies + i2c_adap->timeout;
while ((state = pca_status(adap)) != 0xf8 && timeout--) {
msleep(10);
}
if (state != 0xf8) {
dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state);
return -EAGAIN;
while (pca_status(adap) != 0xf8) {
if (time_before(jiffies, timeout)) {
msleep(10);
} else {
dev_dbg(&i2c_adap->dev, "bus is not idle. status is "
"%#04x\n", state);
return -EAGAIN;
}
}
DEB1("{{{ XFER %d messages\n", num);
......
......@@ -104,7 +104,7 @@ static struct i2c_adapter pca_isa_ops = {
.owner = THIS_MODULE,
.algo_data = &pca_isa_data,
.name = "PCA9564/PCA9665 ISA Adapter",
.timeout = 100,
.timeout = HZ,
};
static int __devinit pca_isa_match(struct device *dev, unsigned int id)
......
......@@ -6,7 +6,7 @@ struct i2c_pca9564_pf_platform_data {
* not supplied (negative value), but it
* cannot exit some error conditions then */
int i2c_clock_speed; /* values are defined in linux/i2c-algo-pca.h */
int timeout; /* timeout = this value * 10us */
int timeout; /* timeout in jiffies */
};
#endif /* I2C_PCA9564_PLATFORM_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册