Update synthesizer calculation to model I prefer nowadays. It is mostly
just renaming some variables, but also minor functionality change how
integer and fractional part are divided (using div_u64_rem()). Also, add
'schematic' of synthesizer following my current understanding.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix an oops during device initialization by correctly setting size_of_priv
instead of leaving it 0.
The regression was introduced by 8abe4a0a ("[media] dib7000:
export just one symbol") and only fixed for one type of dib0700 based
devices in 9e334c75 ("[media] Fix regression in some dib0700
based devices").

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=92301

Fixes: 8abe4a0a ("[media] dib7000: export just one symbol")

Cc: stable@vger.kernel.org # for version 3.17+
Signed-off-by: NThomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

If the streaming_ctrl is called to enable TS before demod has locked
the TS will be empty. Copied the solution from the dvbsky driver for the
TechnoTrend S2-4600 device: when the state changes from unlock to
lock, call su3000_streaming_ctrl again.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

While reading the MAC address for SU3000-based devices the system was
printing excessive debug information in the logs:

Output before the patch:

[ 1515.780692] bc 00 00 00 00 00
[ 1515.781440] bc ea 00 00 00 00
[ 1515.782251] bc ea 2b 00 00 00
[ 1515.783094] bc ea 2b 46 00 00
[ 1515.783816] bc ea 2b 46 12 00
[ 1515.784565] bc ea 2b 46 12 92
[ 1515.784571] dvb-usb: MAC address: bc:ea:2b:46:12:92

Output after the patch:

[ 3803.495706] dvb-usb: MAC address: bc:ea:2b:46:12:92
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

SRVM_MAX_PID_FILTERS was defined in 2 sms_tx_stats structures
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix the 0x0x prefix in integer constants.

In this case a padding 0 must also be inserted to make the constants
look like all the other 16 bits ones.
Signed-off-by: NAntonio Ospite <ao2@ao2.it>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

My static checker warns that the name of the port can be 15 characters
when you consider the NUL terminator and that's one more than the 14
characters in name[].  Maybe it's an off-by-one?

It's unlikely that we hit the limit and even if we do the overflow will
only affect one of the two bytes of padding so it's harmless.  Still
let's fix it and also change the sprintf() to snprintf().
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Building for avr32 leads the following build warning:

drivers/media/rc/st_rc.c:270: warning: passing argument 1 of 'IS_ERR' discards qualifiers from pointer target type
drivers/media/rc/st_rc.c:271: warning: passing argument 1 of 'PTR_ERR' discards qualifiers from pointer target type

devm_ioremap_resource() returns void __iomem *, so change 'base' and
'rx_base' definitions accordingly.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Building for avr32 leads the following build warning:

drivers/media/rc/ir-hix5hd2.c:221: warning: passing argument 1 of 'IS_ERR' discards qualifiers from pointer target type
drivers/media/rc/ir-hix5hd2.c:222: warning: passing argument 1 of 'PTR_ERR' discards qualifiers from pointer target type

devm_ioremap_resource() returns void __iomem *, so change 'base' definition
accordingly.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In a rarely hit randconfig case, the r820t tuner driver can
get built when CONFIG_BITREVERSE is not selected by any
other driver, resulting in this error:

drivers/built-in.o: In function `r820t_read.constprop.3':
:(.text+0xa0594): undefined reference to `byte_rev_table'

For consistency, this adds the 'select BITREVERSE' that
all other similar drivers have.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Without i2c, we can get a build error:

drivers/media/platform/exynos4-is/fimc-is-i2c.c: In function 'fimc_is_i2c_probe':
drivers/media/platform/exynos4-is/fimc-is-i2c.c:58:8: error: implicit declaration of function 'i2c_add_adapter' [-Werror=implicit-function-declaration]

The dependency already exists for exynos-fimc-lite and s5p-fimc,
but is missing for exynos4-fimc.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Several lines touched by the pr_foo refactoring patches are not
following the Linux Coding style.

While we won't be fixing the style globally at the driver, we should,
at least, fix on the lines we touched.

Basically, this patch add (or remove) whitespaces and blank lines
where needed.

No functional changes.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The debug macros are not properly defined, as they generate warnings
like:

ERROR: Macros with complex values should be enclosed in parentheses
+#define core_dbg(fmt, arg...)    if (core_debug) \
+	printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg)

Use do { } while (0) for those macros.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of using printk(), use pr_foo() macros.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of implement its own hexdump logic, use the printk
format, and convert to use pr_info().
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Rename the macros to input_dbg() and ir_dbg(), using pr_fmt()
on both, to be coherent with the other debug macro changes.

The ir_dbg() also prints the IR name.

I'm not sure if it is a good idea to keep both macros here,
but merging them would require tests on different flavors of
saaa7134-based boards.

So, for now, let's keep both.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

rename the macro to vbi_dbg()/video_dbg() and use pr_fmt(),
to be coherent with the other debug macro changes.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

use just one macro instead of 2, naming it as audio_dbg() and
using pr_fmt().
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

instead of using dev->name, let's use pr_fmt() like on the
other parts of saa7134. Also, rename the debug macro to
ts_dbg() to match the namespace for the debug macros.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Converting debug prints to use pr_foo() is not trivial, as the
result will be a way worse than what's provided here, due to the
pieces of the code that prints the I2C transfers. Those use a
lot pr_cont(), and, depending on using either level 1 or 2,
a different set of macros are selected.

So, let's replace d1printk() and d2printk() macros by i2c_dbg()
and i2c_count() adding a debug level there.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On media drivers, debugging messages should be grouped into
categories, as this makes easier to debug the driver.

In the case of saa7134, the core has 2 debug categories, one
for IRQ, and another one for the core itself. The IRQ have
actually 2 levels of debug.

So, instead of using pr_dbg(), where everything would be in
the same box, let's define two macros that use pr_fmt(),
one for the core, and another one for irq.

With that, we can replace the remaining printk() occurrences
at the core to use either core_dbg() or irq_dbg(), depending
on the group of debug macros that need to be enabled.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On a few places, mostly during board detection, some printk()
macros were called without especifying any message level.

Those are actually warnings. So, use pr_warn() for them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As this module doesn't use any debug level, it is easy to
just replace all debug printks by pr_debug().
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As this module doesn't use any debug level, it is easy to
just replace all debug printks by pr_debug().
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

wprintk() macro is now just a wrapper for pr_warn(). Get rid of
it!
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On saa7134-alsa, there is just one printk macro that use a
different debug level.

It should be easy to enable/disable this one using dynamic_printk,
if one need to individually control it.

So, this module can easily use pr_debug() instead of using its
own macros.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On a few places, the search expression used on the script that
replaced pr_info/pr_warn didn't match, because the string were
on the next line.

It is best to manually edit those lines, and re-indent the
paragraphs.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Replaces all occurrences of printk with KERN_INFO, KERN_WARNING
and KERN_ERR to pr_info/pr_warning, pr_err, using this small
shell script:

for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_INFO ','pr_info(',g <$i >a && mv a $i; done
for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_ERR ','pr_err(',g <$i >a && mv a $i; done
for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_WARNING ','pr_warn(',g <$i >a && mv a $i; done
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a pr_fmt macro, and move saa7134.h header to the beginning,
to avoid warnings when using the pr_foo macros.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

commit af3a4a9b ("[media] dib0700: NEC scancode cleanup") cleaned
up the NEC scancode logic but overlooked the RC5 case.

This patch brings the RC5 case in line with the NEC code and makes
the struct self-documenting.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Reported-by: NDavid Cimbůrek <david.cimburek@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This driver does not use any PCI IDs, don't include
the pci_ids.h header.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In case of error, the function platform_device_register_data() returns
ERR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Commit 307e95c9 ("[media] mn88472: implement firmware parity check")
introduced the usage of exit paths that do not free the already allocated
firmware data in case the parity handling fails. Go through the correct
exit paths. Detected by Coverity CID 1295989.
Signed-off-by: NChristian Engelmayer <cengelma@gmx.at>
Acked-by: NBenjamin Larsson <benjamin@southpole.se>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

GoTView MasterHD 3 is a DVB-T2/C USB 2.0 tuner.

It's based on the following components:
- USB bridge: RTL2832P (contains also DVB-T demodulator)
- Demodulator: Si2168-A30
- Tuner: Si2148-A20

The demodulator and the tuner will need firmwares. The Si2148 uses Si2158
firmware. Antti has the firmwares available for download:
http://palosaari.fi/linux/v4l-dvb/firmware/

Do note that for DVB-T either of the demodulators can be used. DVB-C and
DVB-T2 are only supported by the Si2168 demodulator. The driver will
register 2 frontends for the same adapter. Frontend 0 will be the RTL2832
demodulator and frontend 1 will be the Si2168 demodulator. The same
tuner is used for both.

As a consequence of the above, it's recommended to use application that
does implement proper DVBv5 support.

For some reason, the old I2C write method sporadically fails. Thus the
need for an option to only use the new I2C write method supported by the
RTL2832.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support for I2C read operation without a preceeding write.

While here, change the error code to EOPNOTSUPP in case an
unsupported I2C operation is attempted.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The chips supported by the si2157 driver have two IF outputs (either
pins 12+13 or pins 9+11). Instead of hardcoding the output to be used
add an option to choose which output shall be used.

As this patch changes the default behaviour, the IF interface is
specified in each driver currently using si2157 driver. This is to
keep bisectability.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Return error from si2168_cmd_execute in case the demodulator returns an
error.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Change the dvbsky driver to support gapped clock instead of the current
hack.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a parameter in si2168_config to support gapped clock. This might be
necessary on some devices with higher bitrates.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>