[media] saa7134: better handle core debug messages

On media drivers, debugging messages should be grouped into
categories, as this makes easier to debug the driver.

In the case of saa7134, the core has 2 debug categories, one
for IRQ, and another one for the core itself. The IRQ have
actually 2 levels of debug.

So, instead of using pr_dbg(), where everything would be in
the same box, let's define two macros that use pr_fmt(),
one for the core, and another one for irq.

With that, we can replace the remaining printk() occurrences
at the core to use either core_dbg() or irq_dbg(), depending
on the group of debug macros that need to be enabled.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/saa7134/saa7134-core.c

@@ -102,8 +102,11 @@ static unsigned int saa7134_devcount;
 int (*saa7134_dmasound_init)(struct saa7134_dev *dev);
 int (*saa7134_dmasound_exit)(struct saa7134_dev *dev);
 
-#define dprintk(fmt, arg...)	if (core_debug) \
-	printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg)
+#define core_dbg(fmt, arg...)    if (core_debug) \
+	printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg)
+
+#define irq_dbg(level, fmt, arg...)    if (irq_debug > level) \
+	printk(KERN_DEBUG pr_fmt("irq: " fmt), ## arg)
 
 void saa7134_track_gpio(struct saa7134_dev *dev, char *msg)
 {
@@ -116,8 +119,7 @@ void saa7134_track_gpio(struct saa7134_dev *dev, char *msg)
 	saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,SAA7134_GPIO_GPRESCAN);
 	mode   = saa_readl(SAA7134_GPIO_GPMODE0   >> 2) & 0xfffffff;
 	status = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & 0xfffffff;
-	printk(KERN_DEBUG
-	       "%s: gpio: mode=0x%07lx in=0x%07lx out=0x%07lx [%s]\n",
+	core_dbg("%s: gpio: mode=0x%07lx in=0x%07lx out=0x%07lx [%s]\n",
 	       dev->name, mode, (~mode) & status, mode & status, msg);
 }
 
@@ -128,7 +130,7 @@ void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value)
 	index = 1 << bit_no;
 	switch (value) {
 	case 0: /* static value */
-	case 1:	dprintk("setting GPIO%d to static %d\n", bit_no, value);
+	case 1:	core_dbg("setting GPIO%d to static %d\n", bit_no, value);
 		/* turn sync mode off if necessary */
 		if (index & 0x00c00000)
 			saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x00);
@@ -140,7 +142,7 @@ void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value)
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, index, bitval);
 		break;
 	case 3:	/* tristate */
-		dprintk("setting GPIO%d to tristate\n", bit_no);
+		core_dbg("setting GPIO%d to tristate\n", bit_no);
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, index, 0);
 		break;
 	}
@@ -274,7 +276,7 @@ int saa7134_buffer_queue(struct saa7134_dev *dev,
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->slock, flags);
-	dprintk("buffer_queue %p\n", buf);
+	core_dbg("buffer_queue %p\n", buf);
 	if (NULL == q->curr) {
 		if (!q->need_two) {
 			q->curr = buf;
@@ -298,7 +300,7 @@ void saa7134_buffer_finish(struct saa7134_dev *dev,
 			   struct saa7134_dmaqueue *q,
 			   unsigned int state)
 {
-	dprintk("buffer_finish %p\n", q->curr);
+	core_dbg("buffer_finish %p\n", q->curr);
 
 	/* finish current buffer */
 	v4l2_get_timestamp(&q->curr->vb2.v4l2_buf.timestamp);
@@ -318,18 +320,18 @@ void saa7134_buffer_next(struct saa7134_dev *dev,
 	if (!list_empty(&q->queue)) {
 		/* activate next one from queue */
 		buf = list_entry(q->queue.next, struct saa7134_buf, entry);
-		dprintk("buffer_next %p [prev=%p/next=%p]\n",
+		core_dbg("buffer_next %p [prev=%p/next=%p]\n",
 			buf, q->queue.prev, q->queue.next);
 		list_del(&buf->entry);
 		if (!list_empty(&q->queue))
 			next = list_entry(q->queue.next, struct saa7134_buf, entry);
 		q->curr = buf;
 		buf->activate(dev, buf, next);
-		dprintk("buffer_next #2 prev=%p/next=%p\n",
+		core_dbg("buffer_next #2 prev=%p/next=%p\n",
 			q->queue.prev, q->queue.next);
 	} else {
 		/* nothing to do -- just stop DMA */
-		dprintk("buffer_next %p\n", NULL);
+		core_dbg("buffer_next %p\n", NULL);
 		saa7134_set_dmabits(dev);
 		del_timer(&q->timeout);
 	}
@@ -351,7 +353,7 @@ void saa7134_buffer_timeout(unsigned long data)
 	/* flag current buffer as failed,
 	   try to start over with the next one. */
 	if (q->curr) {
-		dprintk("timeout on %p\n", q->curr);
+		core_dbg("timeout on %p\n", q->curr);
 		saa7134_buffer_finish(dev, q, VB2_BUF_STATE_ERROR);
 	}
 	saa7134_buffer_next(dev, q);
@@ -474,7 +476,7 @@ int saa7134_set_dmabits(struct saa7134_dev *dev)
 		   SAA7134_MAIN_CTRL_TE5 |
 		   SAA7134_MAIN_CTRL_TE6,
 		   ctrl);
-	dprintk("dmabits: task=0x%02x ctrl=0x%02x irq=0x%x split=%s\n",
+	core_dbg("dmabits: task=0x%02x ctrl=0x%02x irq=0x%x split=%s\n",
 		task, ctrl, irq, split ? "no" : "yes");
 
 	return 0;
@@ -496,21 +498,21 @@ static void print_irqstatus(struct saa7134_dev *dev, int loop,
 {
 	unsigned int i;
 
-	printk(KERN_DEBUG "%s/irq[%d,%ld]: r=0x%lx s=0x%02lx",
-	       dev->name,loop,jiffies,report,status);
+	irq_dbg(1, "[%d,%ld]: r=0x%lx s=0x%02lx",
+	       loop, jiffies, report,status);
 	for (i = 0; i < IRQBITS; i++) {
 		if (!(report & (1 << i)))
 			continue;
-		printk(" %s",irqbits[i]);
+		pr_cont(" %s",irqbits[i]);
 	}
 	if (report & SAA7134_IRQ_REPORT_DONE_RA0) {
-		printk(" | RA0=%s,%s,%s,%ld",
-		       (status & 0x40) ? "vbi"  : "video",
-		       (status & 0x20) ? "b"    : "a",
-		       (status & 0x10) ? "odd"  : "even",
-		       (status & 0x0f));
+		pr_cont(" | RA0=%s,%s,%s,%ld",
+			(status & 0x40) ? "vbi"  : "video",
+			(status & 0x20) ? "b"    : "a",
+			(status & 0x10) ? "odd"  : "even",
+			(status & 0x0f));
 	}
-	printk("\n");
+	pr_cont("\n");
 }
 
 static irqreturn_t saa7134_irq(int irq, void *dev_id)
@@ -532,16 +534,12 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id)
 		if ((report & SAA7134_IRQ_REPORT_DONE_RA3) &&
 			(dev->dmasound.priv_data != NULL) )
 		{
-			if (irq_debug > 1)
-				printk(KERN_DEBUG "%s/irq: preserving DMA sound interrupt\n",
-				       dev->name);
+			irq_dbg(2, "preserving DMA sound interrupt\n");
 			report &= ~SAA7134_IRQ_REPORT_DONE_RA3;
 		}
 
 		if (0 == report) {
-			if (irq_debug > 1)
-				printk(KERN_DEBUG "%s/irq: no (more) work\n",
-				       dev->name);
+			irq_dbg(2,"no (more) work\n");
 			goto out;
 		}
 
@@ -680,7 +678,7 @@ static int saa7134_hw_enable1(struct saa7134_dev *dev)
 
 static int saa7134_hwinit1(struct saa7134_dev *dev)
 {
-	dprintk("hwinit1\n");
+	core_dbg("hwinit1\n");
 
 	saa_writel(SAA7134_IRQ1, 0);
 	saa_writel(SAA7134_IRQ2, 0);
@@ -742,7 +740,7 @@ static int saa7134_hw_enable2(struct saa7134_dev *dev)
 static int saa7134_hwinit2(struct saa7134_dev *dev)
 {
 
-	dprintk("hwinit2\n");
+	core_dbg("hwinit2\n");
 
 	saa7134_video_init2(dev);
 	saa7134_tvaudio_init2(dev);
@@ -756,7 +754,7 @@ static int saa7134_hwinit2(struct saa7134_dev *dev)
 /* shutdown */
 static int saa7134_hwfini(struct saa7134_dev *dev)
 {
-	dprintk("hwfini\n");
+	core_dbg("hwfini\n");
 
 	if (card_has_mpeg(dev))
 		saa7134_ts_fini(dev);
@@ -793,11 +791,11 @@ static void must_configure_manually(int has_eeprom)
 		for (p = 0; saa7134_pci_tbl[p].driver_data; p++) {
 			if (saa7134_pci_tbl[p].driver_data != i)
 				continue;
-			printk(" %04x:%04x",
+			pr_cont(" %04x:%04x",
 			       saa7134_pci_tbl[p].subvendor,
 			       saa7134_pci_tbl[p].subdevice);
 		}
-		printk("\n");
+		pr_cont("\n");
 	}
 }
 
@@ -1202,12 +1200,12 @@ static int saa7134_buffer_requeue(struct saa7134_dev *dev,
 
 	buf  = q->curr;
 	next = buf;
-	dprintk("buffer_requeue\n");
+	core_dbg("buffer_requeue\n");
 
 	if (!buf)
 		return 0;
 
-	dprintk("buffer_requeue : resending active buffers \n");
+	core_dbg("buffer_requeue : resending active buffers \n");
 
 	if (!list_empty(&q->queue))
 		next = list_entry(q->queue.next, struct saa7134_buf,