To support PCIe devices with higher number of MSI-X interrupt vectors,
e.g. 16 for the LSI RAID card, enhance the Gx RC stack to provide more
MSI-X vectors by using the TRIO Scatter Queues, which provide 8 more
vectors in addition to ~10 from the Map Mem regions.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

The LSI MEGARAID SAS HBA suffers from the problem where it can do
64-bit DMA to streaming buffers but not to consistent buffers.
In other words, 64-bit DMA is used for disk data transfers and 32-bit
DMA must be used for control message transfers. According to LSI,
the firmware is not fully functional yet. This change implements a
kind of hybrid dma_ops to support this.

Note that on most other platforms, the 64-bit DMA addressing space is the
same as the 32-bit DMA space and they overlap the physical memory space.
No special arrangement is needed to support this kind of mixed DMA
capability.  On TILE-Gx, the 64-bit DMA space is completely separate
from the 32-bit DMA space.  Due to the use of the IOMMU, the 64-bit DMA
space doesn't overlap the physical memory space.  On the other hand,
the 32-bit DMA space overlaps the physical memory space under 4GB.
The separate address spaces make it necessary to have separate dma_ops.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

- remove unneeded <linux/bootmem.h> include in pci.c
- eliminate unused pci_controller.first_busno field
- prefer msleep to mdelay
- remove stale comment about pci_scan_bus_parented()
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Using strlen as a model, add length checking to create strnlen.
Signed-off-by: NKen Steele <ken@tilera.com>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

The "inv" (invalidate) instruction is generally less safe than "finv"
(flush and invalidate), as it will drop dirty data from the cache.
It turns out we have almost no need for "inv" (other than for the
older 32-bit architecture in some limited cases), so convert to
"finv" where possible and delete the extra "inv" infrastructure.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Need add cmpxchg64(), or will cause compiling issue.

Need define it as cmpxchg() only for 64-bit operation, since cmpxchg()
can support 8 bytes.

The related error (with allmodconfig):

  drivers/block/blockconsole.c: In function ‘bcon_advance_console_bytes’:
  drivers/block/blockconsole.c:164:2: error: implicit declaration of function ‘cmpxchg64’ [-Werror=implicit-function-declaration]
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Normalize global variables exported by vmlinux.lds to conform usage
guidelines from include/asm-generic/sections.h.

1) Use _text to mark the start of the kernel image including the head
text, and _stext to mark the start of the .text section.
2) Export mandatory global variables __init_begin and __init_end.
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Most of the stuff from kernel/sched.c was moved to kernel/sched/core.c long time
back and the comments/Documentation never got updated.

I figured it out when I was going through sched-domains.txt and so thought of
fixing it globally.

I haven't crossed check if the stuff that is referenced in sched/core.c by all
these files is still present and hasn't changed as that wasn't the motive behind
this patch.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/cdff76a265326ab8d71922a1db5be599f20aad45.1370329560.git.viresh.kumar@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The only reason uaccess routines might sleep
is if they fault. Make this explicit.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1369577426-26721-8-git-send-email-mst@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The Tilera hypervisor shipped in releases up through MDE 4.1 launches
the client operating system (i.e. Linux) at privilege level 1 (PL1).
Starting with MDE 4.2, as part of the work to enable KVM, the
Tilera hypervisor launches Linux at PL2 instead.

This commit makes the KERNEL_PL option default to 2 for tilegx, while
still saying at 1 for tilepro, which doesn't have an updated hypervisor.
It also explains how and when you might want to choose another value.
In addition, we change a small buglet in the on-chip Ethernet driver,
where we were failing to use the KERNEL_PL constant in an API call.

To make the transition cleaner, this change also provides the updated
hv_init() API for the new hypervisor that supports announcing Linux's
compiled-in PL, so the hypervisor can generate a suitable error in the
case of a mismatched hypervisor and Linux binary.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: stable@vger.linux.org

The help text for this config is duplicated across the x86, parisc, and
s390 Kconfig.debug files.  Arnd Bergman noted that the help text was
slightly misleading and should be fixed to state that enabling this
option isn't a problem when using pre 4.4 gcc.

To simplify the rewording, consolidate the text into lib/Kconfig.debug
and modify it there to be more explicit about when you should say N to
this config.

Also, make the text a bit more generic by stating that this option
enables compile time checks so we can cover architectures which emit
warnings vs.  ones which emit errors.  The details of how an
architecture decided to implement the checks isn't as important as the
concept of compile time checking of copy_from_user() calls.

While we're doing this, remove all the copy_from_user_overflow() code
that's duplicated many times and place it into lib/ so that any
architecture supporting this option can get the function for free.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: NHelge Deller <deller@gmx.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit abf09bed ("s390/mm: implement software dirty bits")
introduced another difference in the pte layout vs.  the pmd layout on
s390, thoroughly breaking the s390 support for hugetlbfs.  This requires
replacing some more pte_xxx functions in mm/hugetlbfs.c with a
huge_pte_xxx version.

This patch introduces those huge_pte_xxx functions and their generic
implementation in asm-generic/hugetlb.h, which will now be included on
all architectures supporting hugetlbfs apart from s390.  This change
will be a no-op for those architectures.

[akpm@linux-foundation.org: fix warning]
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>	[for !s390 parts]
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The arch_local_irq_save(), etc., routines are required to function
as compiler barriers.  They do, but it's subtle and requires knowing
that the gcc builtin __insn_mtspr() is marked as a memory clobber.
Provide a comment explaining the assumption.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
[ This came about from me wondering about the synchronization rules of
  __insn_mtspr()   - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The arch_local_irq_save(), etc., routines are required to function
as compiler barriers.  They do, but it's subtle and requires knowing
that the gcc builtin __insn_mtspr() is marked as a memory clobber.
Provide a comment explaining the assumption.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Move it to a common place. Preparatory patch for implementing
set/clear for the idle need_resched poll implementation.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: NCc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20130321215233.446034505@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Use the normal cmpxchg() idiom to implement this functionality.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This patch adds support for the TIF_SYSCALL_TRACEPOINT on the tile
architecture. Basically, it calls the appropriate tracepoints on syscall
entry and exit.
Signed-off-by: NSimon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

It is required by the syscall tracepoint mechanism.
Signed-off-by: NSimon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

When activating syscall tracing, kernel/trace/trace_syscalls.c doesn't
find sys_call_table because it includes <asm/syscall.h>, not
<asm/syscalls.h>. Also, looking at the other architectures, that is
probably where it should be.
Signed-off-by: NSimon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Call tracehook functions for syscall tracing.

The check for TIF_SYSCALL_TRACE was removed, because the same check is
done right before in the assembly file.
Signed-off-by: NSimon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [with ptrace.h fixup]

sys_llseek should specify the high and low 32-bit seek values as "unsigned
int" but instead it specifies "unsigned long".  Since compat syscall
arguments are always sign-extended on tile, this means that a seek value
of 0xffffffff will be incorrectly interpreted as a value of -1ULL.

To avoid the risk of breaking binary compatibility on architectures
that already use sys_llseek this way, we follow the same path as MIPS
and provide a wrapper override.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: stable@kernel.org [v3.6 onwards]

__ARCH_WANT_SYS_RT_SIGACTION,
__ARCH_WANT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND,
__ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore
CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} -
can be assumed always set.

On tilepro without CONFIG_PCI, we can't provide inlines of these
functions, as we don't have readl/writel.

In addition, fix memset_io() signature to take a volatile void *.
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Unfortunately, this name conflicts with a different use of
the name in various places through the tree, so don't provide
it for the kernel.  We preserve it for userspace to avoid
breaking any userspace code that relies on this definition.

This fixes a number of compile errors for various drivers that
are enabled by "allyesconfig".
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This fixes up all of the smaller arches that had __dev* markings for
their platform-specific drivers.

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Myron Stowe <myron.stowe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Jan Glauber <jang@linux.vnet.ibm.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

for the architectures that have usp in pt_regs and do not have
user_stack_pointer() already defined.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

All architectures have
	CONFIG_GENERIC_KERNEL_THREAD
	CONFIG_GENERIC_KERNEL_EXECVE
	__ARCH_WANT_SYS_EXECVE
None of them have __ARCH_WANT_KERNEL_EXECVE and there are only two callers
of kernel_execve() (which is a trivial wrapper for do_execve() now) left.
Kill the conditionals and make both callers use do_execve().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Following the previous patch which adds support for user_regset, tile
can now use this feature.
Signed-off-by: NSimon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This function is used by sparc, powerpc tile and arm64 for compat support.
 The patch adds a generic implementation with a wrapper for PowerPC to do
the u32->int sign extension.

The reason for a single patch covering powerpc, tile, sparc and arm64 is
to keep it bisectable, otherwise kernel building may fail with mismatched
function declarations.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>  [for tile]
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the newer idioms for setting PTRACE_O_xxx and PT_TRACE_xxx flags.
Only set/clear tile-specific flags if the generic routine returns
success, since otherwise we want to avoid setting any flags at all.
Atomically update the ptrace flags with the new values.  Eliminate
the PT_TRACE_MASK_TILE bitmask and just shift PTRACE_O_MASK_TILE.
Add a BUILD_BUG_ON to avoid overlapping with generic bits.
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

This flag is set for ptrace GETREGS or PEEKUSER for processes
that are COMPAT, i.e. 32-bit.  This allows things like strace
to easily discover what personality to use, for example.
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>

now it can be done...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add dma-debug interface debug_dma_mapping_error() to debug drivers that fail
to check dma mapping errors on addresses returned by dma_map_single() and
dma_map_page() interfaces.
Signed-off-by: NShuah Khan <shuah.khan@hp.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>