“b10af3f70bfaf98b6405dcd0561283b7ec485630”上不存在“README.md”
- 11 6月, 2013 1 次提交
-
-
由 Chen Gang 提交于
'compatible' is used by strlen() in __of_device_is_compatible(). Ensure strings are always '\0' terminated. 'of_ids is not a structure in "include/uapi/*", so no need to initialize it completly; using strlcpy() instead of strncpy() will do. Signed-off-by: NChen Gang <gang.chen@asianux.com> Acked-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Linux-Arch <linux-arch@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/5329/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 18 5月, 2013 2 次提交
-
-
由 Wolfram Sang 提交于
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Acked-by: NJohn Crispin <blogic@openwrt.org>
-
由 Libo Chen 提交于
When gptu_r32 fails, we should put clk before returning. Signed-off-by: NLibo Chen <libo.chen@huawei.com> Acked-by: NJohn Crispin <blogic@openwrt.org> Cc: grant.likely@linaro.org Cc: rob.herring@calxeda.com, Cc: linux-mips@linux-mips.org Cc: LKML linux-kernel@vger.kernel.org Cc: Andrew Morton akpm@linux-foundation.org Cc: Li Zefan lizefan@huawei.com Patchwork: https://patchwork.linux-mips.org/patch/5247/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 17 2月, 2013 4 次提交
-
-
由 John Crispin 提交于
This code makes the irqs used by the EIU loadable from the DT. Additionally we add a helper that allows the pinctrl layer to map external irqs to real irq numbers. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4818/
-
由 John Crispin 提交于
Explicitly enable the clock gate of the internal GPHYs found on xrx200. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4816/
-
由 John Crispin 提交于
The Lantiq DSL SoCs have an internal networking processor. Add code to read the static clock rate. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4815/
-
由 John Crispin 提交于
"nodes" is written with a single "s" Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4814/
-
- 01 2月, 2013 1 次提交
-
-
由 Ralf Baechle 提交于
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 31 1月, 2013 1 次提交
-
-
由 John Crispin 提交于
The introduction of the OF support broke the cp0_perfcount_irq mapping. This resulted in oprofile not working anymore. Offending commit is : commit 3645da02 Author: John Crispin <blogic@openwrt.org> Date: Tue Apr 17 10:18:32 2012 +0200 OF: MIPS: lantiq: implement irq_domain support Signed-off-by: NConor O'Gorman <i@conorogorman.net> Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4875/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 26 1月, 2013 1 次提交
-
-
由 Thierry Reding 提交于
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 1月, 2013 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 12月, 2012 1 次提交
-
-
由 Masanari Iida 提交于
Correct spelling typo ENDIANESS to ENDIANNESS in arc/mips/lantiq/xway/dma.c Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Cc: trivial@kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4613/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 01 12月, 2012 1 次提交
-
-
由 Stephen Warren 提交于
All architectures that use cmd_dtc do so in almost the same way. Create a central build rule to avoid duplication. The one difference is that most current uses of dtc build $(obj)/%.dtb from $(src)/dts/%.dts rather than building the .dtb in the same directory as the .dts file. This difference will be eliminated arch-by-arch in future patches. MIPS is the exception here; it already uses the exact same rule as the new common rule, so the duplicate is removed in this patch to avoid any conflict. arch/mips changes courtesy of Ralf Baechle. Update Documentation/kbuild to remove the explicit call to cmd_dtc from the example, now that the rule exists in a centralized location. Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: linux@lists.openrisc.net Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: linux-c6x-dev@linux-c6x.org Cc: Mark Salter <msalter@redhat.com> Cc: Michal Simek <monstr@monstr.eu> Cc: microblaze-uclinux@itee.uq.edu.au Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
- 12 11月, 2012 6 次提交
-
-
由 John Crispin 提交于
The internal GPHYs need a firmware blob to function properly. This patch adds the code needed to request the blob and load it to the PHY. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4523
-
由 John Crispin 提交于
The XRX200 family of SoCs has embedded gigabit PHYs. This patch adds code to boot them up. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4522
-
由 John Crispin 提交于
Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4521
-
由 John Crispin 提交于
Print the hardware revision and port/channel info when starting the dma core. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4520
-
由 John Crispin 提交于
The XRX200 SoC family has a different register layout for reading the boot selection bits. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4519
-
由 John Crispin 提交于
The bootmem was incorrectly freed resulting in lots of dangling pointers. Additionally we should use of_platform_populate() as the Documentaion tells us to do so. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4518
-
- 13 9月, 2012 2 次提交
-
-
由 John Crispin 提交于
Implement support for pinctrl on lantiq/falcon socs. The FALCON has 5 banks of up to 32 pins. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Signed-off-by: NThomas Langer <thomas.langer@lantiq.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org
-
由 John Crispin 提交于
Implement support for pinctrl on lantiq/xway socs. The IO core found on these socs has the registers for pinctrl, pinconf and gpio mixed up in the same register range. As the gpio_chip handling is only a few lines, the driver also implements the gpio functionality. This obseletes the old gpio driver that was located in the arch/ folder. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org
-
- 23 8月, 2012 9 次提交
-
-
由 John Crispin 提交于
Lantiq socs have a General Purpose Timer Unit (GPTU). This driver allows us to initialize the timers. The voice firmware needs these timers as a reference. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4236/
-
由 John Crispin 提交于
The xrx200 SoC family has the same PCI clock register layout as the AR9. Enable the same quirk as for AR9 Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4235/
-
由 John Crispin 提交于
As a result of a non populated ->bits field inside the clock struct, the clock domains were never powered on the Falcon. Until now we only used domains that were also used and powered by the bootloader. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4234/
-
由 John Crispin 提交于
Register nmi and ejtag bootrom vectors for FALC-ON SoC. Signed-off-by: NThomas Langer <thomas.langer@lantiq.com> Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4238/
-
由 John Crispin 提交于
Support for the external interrupt unit was broken when the code was converted to devicetree support. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4231/
-
由 John Crispin 提交于
We dont want to register the irq_chip for the MIPS IRQ cascade. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4230/
-
由 John Crispin 提交于
The SVIP SoC has its timer IRQ on a different IRQ than 7. Fix up the irq code to be able to handle this. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4229/
-
由 John Crispin 提交于
Up to now all our SoCs had the 5 IM ranges in a consecutive order. To accomodate the SVIP we need to support IM ranges that are scattered inside the register range. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4237/
-
由 John Crispin 提交于
Previously we relied on the bootloader to have enabled this bit. However some bootloaders seem to not enable this for us. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4120/
-
- 01 8月, 2012 3 次提交
-
-
由 John Crispin 提交于
As we use CLKDEV_LOOKUP but dont have support for COMMON_CLK yet, we need to provide our own version of of_clk_get_from_provider(). Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4117/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 John Crispin 提交于
Add a lantiq specific version of device_tree_init. The generic MIPS version was removed by. commit 594e966bc412d64eec9282d28ce511bdd62fea39 Author: David Daney <david.daney@cavium.com> Date: Thu Jul 5 18:12:38 2012 +0200 MIPS: Prune some target specific code out of prom.c Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4116/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 John Crispin 提交于
The XRX200 based SoC have a different register offset for the interface clock and PCI control registers. This patch detects the SoC and sets the register offset at runtime. This make PCI work on the VR9 SoC. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4113/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 27 5月, 2012 1 次提交
-
-
由 John Crispin 提交于
Now that all drivers are converted to OF we are able to remove some remaining pieces of orphaned code. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3841/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 21 5月, 2012 6 次提交
-
-
由 John Crispin 提交于
Adds support for the FALCON SoC. This SoC is from the FTTH/GPON SoC family. Signed-off-by: NThomas Langer <thomas.langer@lantiq.com> Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3814/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 John Crispin 提交于
Move the 2 drivers from arch/mips/lantiq/xway/ to the subsystem and make them buildable. The following 2 patches will convert the drivers to OF. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: NGrant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3838/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 John Crispin 提交于
Implement support for OF inside the lantiq PCI driver. The patch also splits pcibios_plat_dev_init and pcibios_map_irq out into their own file to accomodate coexistance with the upcoming pcie driver. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3806/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 John Crispin 提交于
Add code to make the dma driver load as a platform device from the devicetree. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3824/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 John Crispin 提交于
This patch unifies all clock generation and gating code into one file. All drivers will now be able to request their clocks via their device. This patch also adds support for the clockout feature, which allows clock generation on external pins. Support for COMMON_CLK will be provided in the next series. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3804/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 John Crispin 提交于
As part of the conversion to OF we also implement pinctrl drivers. Previously we used ltq_gpio_request() to set pinmuxing. This is now obselete and we can hence drop the function. Additionally we remove gpio_to_irq() from the gpio driver and move it to a header file. Signed-off-by: NJohn Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3801/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-