During a node failure, We need to suspend read balancing so that the
reads are directed to the first device and stale data is not read.
Suspending writes is not required because these would be recorded and
synced eventually.

A new flag MD_CLUSTER_SUSPEND_READ_BALANCING is set in recover_prep().
area_resyncing() will respond true for the entire devices if this
flag is set and the request type is READ. The flag is cleared
in recover_done().
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Reported-By: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.com>

bitmap_read_sb is modifying mddev->bitmap_info.offset. This works for
the first bitmap read. However, when multiple bitmaps need to be opened
by the same node, it ends up corrupting the offset. Fix it by using a
local variable.

Also, bitmap_read_sb is not required in bitmap_copy_from_slot since
it is called in bitmap_create. Remove bitmap_read_sb().
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NNeilBrown <neilb@suse.com>

request_module() can return 256 (process exited) in some cases,
which is not as specified in the documentation before the
request_module() definition. Convert the error to -ENOENT.

The positive error number results in bitmap_create() returning
a value that is meant to be an error but doesn't look like one,
so it is dereferenced as a point and causes a crash.

(not needed for stable as this is "experimental" code)
Fixes: edb39c9d ("Introduce md_cluster_operations to handle cluster functions")
Signed-off-By: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NNeilBrown <neilb@suse.com>

If the bitmap read fails, the error code set is -EINVAL. However,
we don't check for errors and go ahead with cluster_setup.
Skip the cluster setup in case of error.
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NNeilBrown <neilb@suse.com>

When we get a read error from the last working device, we don't
try to repair it, and don't fail the device.  We simple report a
read error to the caller.

However the current test for 'is this the last working device' is
wrong.
When there is only one fully working device, it assumes that a
non-faulty device is that device.  However a spare which is rebuilding
would be non-faulty but so not the only working device.

So change the test from "!Faulty" to "In_sync".  If ->degraded says
there is only one fully working device and this device is in_sync,
this must be the one.

This bug has existed since we allowed read_balance to read from
a recovering spare in v3.0
Reported-and-tested-by: NAlexander Lyakas <alex.bolshoy@gmail.com>
Fixes: 76073054 ("md/raid1: clean up read_balance.")
Cc: stable@vger.kernel.org (v3.0+)
Signed-off-by: NNeilBrown <neilb@suse.com>

There is a bug that the bitmap superblock isn't initialised properly for
dm-raid, so a new field can have garbage in new fields.
(dm-raid does initialisation in the kernel - md initialised the
 superblock in mdadm).

This means that for dm-raid we cannot currently trust the new ->nodes
field. So:
 - use __GFP_ZERO to initialise the superblock properly for all new
    arrays
 - initialise all fields in bitmap_info in bitmap_new_disk_sb
 - ignore ->nodes for dm arrays (yes, this is a hack)

This bug exposes dm-raid to bug in the (still experimental) md-cluster
code, so it is suitable for -stable.  It does cause crashes.

References: https://bugzilla.kernel.org/show_bug.cgi?id=100491
Cc: stable@vger.kernel.org (v4.1)
Signed-off-By: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NNeilBrown <neilb@suse.com>

The 'event_work' worker used by dm-raid may still be running
when the array is stopped.  This can result in an oops.

So flush the workqueue on which it is run after detaching
and before destroying the device.
Reported-by: NHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.com>
Cc: stable@vger.kernel.org (2.6.38+ please delay 2 weeks after -final release)
Fixes: 9d09e663 ("dm: raid456 basic support")

'reshape_position' tracks where in the reshape we have reached.
'reshape_safe' tracks where in the reshape we have safely recorded
in the metadata.

These are compared to determine when to update the metadata.
So it is important that reshape_safe is initialised properly.
Currently it isn't.  When starting a reshape from the beginning
it usually has the correct value by luck.  But when reducing the
number of devices in a RAID10, it has the wrong value and this leads
to the metadata not being updated correctly.
This can lead to corruption if the reshape is not allowed to complete.

This patch is suitable for any -stable kernel which supports RAID10
reshape, which is 3.5 and later.

Fixes: 3ea7daa5 ("md/raid10: add reshape support")
Cc: stable@vger.kernel.org (v3.5+ please wait for -final to be out for 2 weeks)
Signed-off-by: NNeilBrown <neilb@suse.com>

Cache size can grow or shrink due to various pressures at
any time.  So when we resize the cache as part of a 'grow'
operation (i.e. change the size to allow more devices) we need
to blocks that automatic growing/shrinking.

So introduce a mutex.  auto grow/shrink uses mutex_trylock()
and just doesn't bother if there is a blockage.
Resizing the whole cache holds the mutex to ensure that
the correct number of new stripes is allocated.

This bug can result in some stripes not being freed when an
array is stopped.  This leads to the kmem_cache not being
freed and a subsequent array can try to use the same kmem_cache
and get confused.

Fixes: edbe83ab ("md/raid5: allow the stripe_cache to grow and shrink.")
Cc: stable@vger.kernel.org (4.1 - please delay until 2 weeks after release of 4.2)
Signed-off-by: NNeilBrown <neilb@suse.com>

Pull md updates from Neil Brown:
 "A mixed bag

   - a few bug fixes
   - some performance improvement that decrease lock contention
   - some clean-up

  Nothing major"

* tag 'md/4.2' of git://neil.brown.name/md:
  md: clear Blocked flag on failed devices when array is read-only.
  md: unlock mddev_lock on an error path.
  md: clear mddev->private when it has been freed.
  md: fix a build warning
  md/raid5: ignore released_stripes check
  md/raid5: per hash value and exclusive wait_for_stripe
  md/raid5: split wait_for_stripe and introduce wait_for_quiescent
  wait: introduce wait_event_exclusive_cmd
  md: convert to kstrto*()
  md/raid10: make sync_request_write() call bio_copy_data()

This patch restores the slab creation sequence that was broken by commit
4066c33d and also reverts the portions that introduced the
KMALLOC_LOOP_XXX macros. Those can never really work since the slab creation
is much more complex than just going from a minimum to a maximum number.

The latest upstream kernel boots cleanly on my machine with a 64 bit x86
configuration under KVM using either SLAB or SLUB.

Fixes: 4066c33d ("support the slub_debug boot option")
Reported-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull libnvdimm subsystem from Dan Williams:
 "The libnvdimm sub-system introduces, in addition to the
  libnvdimm-core, 4 drivers / enabling modules:

  NFIT:
    Instantiates an "nvdimm bus" with the core and registers memory
    devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware
    Interface table).

    After registering NVDIMMs the NFIT driver then registers "region"
    devices.  A libnvdimm-region defines an access mode and the
    boundaries of persistent memory media.  A region may span multiple
    NVDIMMs that are interleaved by the hardware memory controller.  In
    turn, a libnvdimm-region can be carved into a "namespace" device and
    bound to the PMEM or BLK driver which will attach a Linux block
    device (disk) interface to the memory.

  PMEM:
    Initially merged in v4.1 this driver for contiguous spans of
    persistent memory address ranges is re-worked to drive
    PMEM-namespaces emitted by the libnvdimm-core.

    In this update the PMEM driver, on x86, gains the ability to assert
    that writes to persistent memory have been flushed all the way
    through the caches and buffers in the platform to persistent media.
    See memcpy_to_pmem() and wmb_pmem().

  BLK:
    This new driver enables access to persistent memory media through
    "Block Data Windows" as defined by the NFIT.  The primary difference
    of this driver to PMEM is that only a small window of persistent
    memory is mapped into system address space at any given point in
    time.

    Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access
    different portions of the media.  BLK-mode, by definition, does not
    support DAX.

  BTT:
    This is a library, optionally consumed by either PMEM or BLK, that
    converts a byte-accessible namespace into a disk with atomic sector
    update semantics (prevents sector tearing on crash or power loss).

    The sinister aspect of sector tearing is that most applications do
    not know they have a atomic sector dependency.  At least today's
    disk's rarely ever tear sectors and if they do one almost certainly
    gets a CRC error on access.  NVDIMMs will always tear and always
    silently.  Until an application is audited to be robust in the
    presence of sector-tearing the usage of BTT is recommended.

  Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
  Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
  Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
  Wysocki, and Bob Moore"

* tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits)
  arch, x86: pmem api for ensuring durability of persistent memory updates
  libnvdimm: Add sysfs numa_node to NVDIMM devices
  libnvdimm: Set numa_node to NVDIMM devices
  acpi: Add acpi_map_pxm_to_online_node()
  libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only
  pmem: flag pmem block devices as non-rotational
  libnvdimm: enable iostat
  pmem: make_request cleanups
  libnvdimm, pmem: fix up max_hw_sectors
  libnvdimm, blk: add support for blk integrity
  libnvdimm, btt: add support for blk integrity
  fs/block_dev.c: skip rw_page if bdev has integrity
  libnvdimm: Non-Volatile Devices
  tools/testing/nvdimm: libnvdimm unit test infrastructure
  libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory
  nd_btt: atomic sector updates
  libnvdimm: infrastructure for btt devices
  libnvdimm: write blk label set
  libnvdimm: write pmem label set
  libnvdimm: blk labels and namespace instantiation
  ...

Pull dmaengine updates from Vinod Koul:
 "This time we have support for few new devices, few new features and
  odd fixes spread thru the subsystem.

  New devices added:
   - support for CSRatlas7 dma controller
   - Allwinner H3(sun8i) controller
   - TI DMA crossbar driver on DRA7x
   - new pxa driver

  New features added:
   - memset support is bought back now that we have a user in xdmac controller
   - interleaved transfers support different source and destination strides
   - supporting DMA routers and configuration thru DT
   - support for reusing descriptors
   - xdmac memset and interleaved transfer support
   - hdmac support for interleaved transfers
   - omap-dma support for memcpy

  Others:
   - Constify platform_device_id
   - mv_xor fixes and improvements"

* tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: xgene: fix file permission
  dmaengine: fsl-edma: clear pending interrupts on initialization
  dmaengine: xdmac: Add memset support
  Documentation: dmaengine: document DMA_CTRL_ACK
  dmaengine: virt-dma: don't always free descriptor upon completion
  dmaengine: Revert "drivers/dma: remove unused support for MEMSET operations"
  dmaengine: hdmac: Implement interleaved transfers
  dmaengine: Move icg helpers to global header
  dmaengine: mv_xor: improve descriptors list handling and reduce locking
  dmaengine: mv_xor: Enlarge descriptor pool size
  dmaengine: mv_xor: add support for a38x command in descriptor mode
  dmaengine: mv_xor: Rename function for consistent naming
  dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup
  dmaengine: pl330: fix wording in mcbufsz message
  dmaengine: sirf: add CSRatlas7 SoC support
  dmaengine: xgene-dma: Fix "incorrect type in assignement" warnings
  dmaengine: fix kernel-doc documentation
  dmaengine: pxa_dma: add support for legacy transition
  dmaengine: pxa_dma: add debug information
  dmaengine: pxa: add pxa dmaengine driver
  ...

Pull ia64 updates from Tony Luck:
 "Pair of ia64 cleanups"

* tag 'please-pull-misc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: Use setup_timer
  ia64: export flush_icache_range for module use

Merge tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "This update adds two new test suites: futex and seccomp.

  In addition, it includes fixes for bugs in timers, other tests, and
  compile framework.  It introduces new quicktest feature to enable
  users to choose to run tests that complete in a short time"

* tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: add quicktest support
  selftests: add seccomp suite
  selftest, x86: fix incorrect comment
  tools selftests: Fix 'clean' target with make 3.81
  selftests/futex: Add .gitignore
  kselftest: Add exit code defines
  selftests: Add futex tests to the top-level Makefile
  selftests/futex: Increment ksft pass and fail counters
  selftests/futex: Update Makefile to use lib.mk
  selftests: Add futex functional tests
  kselftests: timers: Check _ALARM clockids are supported before suspending
  kselftests: timers: Ease alarmtimer-suspend unreasonable latency value
  kselftests: timers: Increase delay between suspends in alarmtimer-suspend
  selftests/exec: do not install subdir as it is already created
  selftests/ftrace: install test.d
  selftests: copy TEST_DIRS to INSTALL_PATH
  Test compaction of mlocked memory
  selftests/mount: output WARN messages when mount test skipped
  selftests/timers: Make git ignore all binaries in timers test suite

Pull m68knommu updates from Greg Ungerer:
 "Only a couple of small changes.

  Improved the m68knommu MAINTAINERS entry to make it clearer which m68k
  parts this applies to, and a print format clean up"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: improve m68knommu MAINTAINERS entry
  m68k: Use vsprintf %pM extension

Pull UML updates from Richard Weinberger:

 - remove hppfs ("HonePot ProcFS")

 - initial support for musl libc

 - uaccess cleanup

 - random cleanups and bug fixes all over the place

* 'for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (21 commits)
  um: Don't pollute kernel namespace with uapi
  um: Include sys/types.h for makedev(), major(), minor()
  um: Do not use stdin and stdout identifiers for struct members
  um: Do not use __ptr_t type for stack_t's .ss pointer
  um: Fix mconsole dependency
  um: Handle tracehook_report_syscall_entry() result
  um: Remove copy&paste code from init.h
  um: Stop abusing __KERNEL__
  um: Catch unprotected user memory access
  um: Fix warning in setup_signal_stack_si()
  um: Rework uaccess code
  um: Add uaccess.h to ldt.c
  um: Add uaccess.h to syscalls_64.c
  um: Add asm/elf.h to vma.c
  um: Cleanup mem_32/64.c headers
  um: Remove hppfs
  um: Move syscall() declaration into os.h
  um: kernel: ksyms: Export symbol syscall() for fixing modpost issue
  um/os-Linux: Use char[] for syscall_stub declarations
  um: Use char[] for linker script address declarations
  ...

Pull VFIO updates from Alex Williamson:

 - fix race with device reference versus driver release (Alex Williamson)

 - add reset hooks and Calxeda xgmac reset for vfio-platform (Eric Auger)

 - enable vfio-platform for ARM64 (Eric Auger)

 - tag Baptiste Reynal as vfio-platform sub-maintainer (Alex Williamson)

* tag 'vfio-v4.2-rc1' of git://github.com/awilliam/linux-vfio:
  MAINTAINERS: Add vfio-platform sub-maintainer
  VFIO: platform: enable ARM64 build
  VFIO: platform: Calxeda xgmac reset module
  VFIO: platform: populate the reset function on probe
  VFIO: platform: add reset callback
  VFIO: platform: add reset struct and lookup table
  vfio/pci: Fix racy vfio_device_get_from_dev() call

Pull audit updates from Paul Moore:
 "Four small audit patches for v4.2, all bug fixes.  Only 10 lines of
  change this time so very unremarkable, the patch subject lines pretty
  much tell the whole story"

* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
  audit: Fix check of return value of strnlen_user()
  audit: obsolete audit_context check is removed in audit_filter_rules()
  audit: fix for typo in comment to function audit_log_link_denied()
  lsm: rename duplicate labels in LSM_AUDIT_DATA_TASK audit message type

Pull security subsystem updates from James Morris:
 "The main change in this kernel is Casey's generalized LSM stacking
  work, which removes the hard-coding of Capabilities and Yama stacking,
  allowing multiple arbitrary "small" LSMs to be stacked with a default
  monolithic module (e.g.  SELinux, Smack, AppArmor).

  See
        https://lwn.net/Articles/636056/

  This will allow smaller, simpler LSMs to be incorporated into the
  mainline kernel and arbitrarily stacked by users.  Also, this is a
  useful cleanup of the LSM code in its own right"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (38 commits)
  tpm, tpm_crb: fix le64_to_cpu conversions in crb_acpi_add()
  vTPM: set virtual device before passing to ibmvtpm_reset_crq
  tpm_ibmvtpm: remove unneccessary message level.
  ima: update builtin policies
  ima: extend "mask" policy matching support
  ima: add support for new "euid" policy condition
  ima: fix ima_show_template_data_ascii()
  Smack: freeing an error pointer in smk_write_revoke_subj()
  selinux: fix setting of security labels on NFS
  selinux: Remove unused permission definitions
  selinux: enable genfscon labeling for sysfs and pstore files
  selinux: enable per-file labeling for debugfs files.
  selinux: update netlink socket classes
  signals: don't abuse __flush_signals() in selinux_bprm_committed_creds()
  selinux: Print 'sclass' as string when unrecognized netlink message occurs
  Smack: allow multiple labels in onlycap
  Smack: fix seq operations in smackfs
  ima: pass iint to ima_add_violation()
  ima: wrap event related data to the new ima_event_data structure
  integrity: add validity checks for 'path' parameter
  ...

Pull MIPS updates from Ralf Baechle:

 - Improvements to the tlb_dump code
 - KVM fixes
 - Add support for appended DTB
 - Minor improvements to the R12000 support
 - Minor improvements to the R12000 support
 - Various platform improvments for BCM47xx
 - The usual pile of minor cleanups
 - A number of BPF fixes and improvments
 - Some improvments to the support for R3000 and DECstations
 - Some improvments to the ATH79 platform support
 - A major patchset for the JZ4740 SOC adding support for the CI20 platform
 - Add support for the Pistachio SOC
 - Minor BMIPS/BCM63xx platform support improvments.
 - Avoid "SYNC 0" as memory barrier when unlocking spinlocks
 - Add support for the XWR-1750 board.
 - Paul's __cpuinit/__cpuinitdata cleanups.
 - New Malta CPU board support large memory so enable ZONE_DMA32.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits)
  MIPS: spinlock: Adjust arch_spin_lock back-off time
  MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA
  MIPS: BCM47xx: Simplify handling SPROM revisions
  MIPS: Cobalt Don't use module_init in non-modular MTD registration.
  MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
  MIPS: use for_each_sg()
  MIPS: BCM47xx: Don't select BCMA_HOST_PCI
  MIPS: BCM47xx: Add helper variable for storing NVRAM length
  MIPS: IRQ/IP27: Move IRQ allocation API to platform code.
  MIPS: Replace smp_mb with release barrier function in unlocks.
  MIPS: i8259: DT support
  MIPS: Malta: Basic DT plumbing
  MIPS: include errno.h for ENODEV in mips-cm.h
  MIPS: Define GCR_GIC_STATUS register fields
  MIPS: BPF: Introduce BPF ASM helpers
  MIPS: BPF: Use BPF register names to describe the ABI
  MIPS: BPF: Move register definition to the BPF header
  MIPS: net: BPF: Replace RSIZE with SZREG
  MIPS: BPF: Free up some callee-saved registers
  MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers
  ...

Pull nfsd updates from Bruce Fields:
 "A relatively quiet cycle, with a mix of cleanup and smaller bugfixes"

* 'for-4.2' of git://linux-nfs.org/~bfields/linux: (24 commits)
  sunrpc: use sg_init_one() in krb5_rc4_setup_enc/seq_key()
  nfsd: wrap too long lines in nfsd4_encode_read
  nfsd: fput rd_file from XDR encode context
  nfsd: take struct file setup fully into nfs4_preprocess_stateid_op
  nfsd: refactor nfs4_preprocess_stateid_op
  nfsd: clean up raparams handling
  nfsd: use swap() in sort_pacl_range()
  rpcrdma: Merge svcrdma and xprtrdma modules into one
  svcrdma: Add a separate "max data segs macro for svcrdma
  svcrdma: Replace GFP_KERNEL in a loop with GFP_NOFAIL
  svcrdma: Keep rpcrdma_msg fields in network byte-order
  svcrdma: Fix byte-swapping in svc_rdma_sendto.c
  nfsd: Update callback sequnce id only CB_SEQUENCE success
  nfsd: Reset cb_status in nfsd4_cb_prepare() at retrying
  svcrdma: Remove svc_rdma_xdr_decode_deferred_req()
  SUNRPC: Move EXPORT_SYMBOL for svc_process
  uapi/nfs: Add NFSv4.1 ACL definitions
  nfsd: Remove dead declarations
  nfsd: work around a gcc-5.1 warning
  nfsd: Checking for acl support does not require fetching any acls
  ...

Pull GFS2 updates from Bob Peterson:
 "Here are the patches we've accumulated for GFS2 for the current
  upstream merge window.  We have a good mixture this time.  Here are
  some of the features:

   - Fix a problem with RO mounts writing to the journal.

   - Further improvements to quotas on GFS2.

   - Added support for rename2 and RENAME_EXCHANGE on GFS2.

   - Increase performance by making glock lru_list less of a bottleneck.

   - Increase performance by avoiding unnecessary buffer_head releases.

   - Increase performance by using average glock round trip time from all CPUs.

   - Fixes for some compiler warnings and minor white space issues.

   - Other misc bug fixes"

* tag 'gfs2-merge-window' of git://git.kernel.org:/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  GFS2: Don't brelse rgrp buffer_heads every allocation
  GFS2: Don't add all glocks to the lru
  gfs2: Don't support fallocate on jdata	files
  gfs2: s64 cast for negative quota value
  gfs2: limit quota log messages
  gfs2: fix quota updates on block boundaries
  gfs2: fix shadow warning in gfs2_rbm_find()
  gfs2: kerneldoc warning fixes
  gfs2: convert simple_str to kstr
  GFS2: make sure S_NOSEC flag isn't overwritten
  GFS2: add support for rename2 and RENAME_EXCHANGE
  gfs2: handle NULL rgd in set_rgrp_preferences
  GFS2: inode.c: indent with TABs, not spaces
  GFS2: mark the journal idle to fix ro mounts
  GFS2: Average in only non-zero round-trip times for congestion stats
  GFS2: Use average srttb value in congestion calculations

This reverts commit 2143c196.

This commit seems to be the cause of the following jbd2 assertion
failure:

   ------------[ cut here ]------------
   kernel BUG at fs/jbd2/transaction.c:1325!
   invalid opcode: 0000 [#1] SMP
   Modules linked in: bnep bluetooth fuse ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 ...
   CPU: 7 PID: 5509 Comm: gcc Not tainted 4.1.0-10944-g2a298679 #1
   Hardware name:                  /DH87RL, BIOS RLH8710H.86A.0327.2014.0924.1645 09/24/2014
   task: ffff8803bf866040 ti: ffff880308528000 task.ti: ffff880308528000
   RIP: jbd2_journal_dirty_metadata+0x237/0x290
   Call Trace:
     __ext4_handle_dirty_metadata+0x43/0x1f0
     ext4_handle_dirty_dirent_node+0xde/0x160
     ? jbd2_journal_get_write_access+0x36/0x50
     ext4_delete_entry+0x112/0x160
     ? __ext4_journal_start_sb+0x52/0xb0
     ext4_unlink+0xfa/0x260
     vfs_unlink+0xec/0x190
     do_unlinkat+0x24a/0x270
     SyS_unlink+0x11/0x20
     entry_SYSCALL_64_fastpath+0x12/0x6a
   ---[ end trace ae033ebde8d080b4 ]---

which is not easily reproducible (I've seen it just once, and then Ted
was able to reproduce it once).  Revert it while Ted and Jan try to
figure out what is wrong.

Cc: Jan Kara <jack@suse.cz>
Acked-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull workqueue updates from Tejun Heo:
 "Most of the changes are around implementing and fixing fallouts from
  sysfs and internal interface to limit the CPUs available to all
  unbound workqueues to help isolating CPUs.  It needs more work as
  ordered workqueues can roam unrestricted but still is a significant
  improvement"

* 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix typos in comments
  workqueue: move flush_scheduled_work() to workqueue.h
  workqueue: remove the lock from wq_sysfs_prep_attrs()
  workqueue: remove the declaration of copy_workqueue_attrs()
  workqueue: ensure attrs changes are properly synchronized
  workqueue: separate out and refactor the locking of applying attrs
  workqueue: simplify wq_update_unbound_numa()
  workqueue: wq_pool_mutex protects the attrs-installation
  workqueue: fix a typo
  workqueue: function name in the comment differs from the real function name
  workqueue: fix trivial typo in Documentation/workqueue.txt
  workqueue: Allow modifying low level unbound workqueue cpumask
  workqueue: Create low-level unbound workqueues cpumask
  workqueue: split apply_workqueue_attrs() into 3 stages

Pull cgroup updates from Tejun Heo:

 - threadgroup_lock got reorganized so that its users can pick the
   actual locking mechanism to use.  Its only user - cgroups - is
   updated to use a percpu_rwsem instead of per-process rwsem.

   This makes things a bit lighter on hot paths and allows cgroups to
   perform and fail multi-task (a process) migrations atomically.
   Multi-task migrations are used in several places including the
   unified hierarchy.

 - Delegation rule and documentation added to unified hierarchy.  This
   will likely be the last interface update from the cgroup core side
   for unified hierarchy before lifting the devel mask.

 - Some groundwork for the pids controller which is scheduled to be
   merged in the coming devel cycle.

* 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: add delegation section to unified hierarchy documentation
  cgroup: require write perm on common ancestor when moving processes on the default hierarchy
  cgroup: separate out cgroup_procs_write_permission() from __cgroup_procs_write()
  kernfs: make kernfs_get_inode() public
  MAINTAINERS: add a cgroup core co-maintainer
  cgroup: fix uninitialised iterator in for_each_subsys_which
  cgroup: replace explicit ss_mask checking with for_each_subsys_which
  cgroup: use bitmask to filter for_each_subsys
  cgroup: add seq_file forward declaration for struct cftype
  cgroup: simplify threadgroup locking
  sched, cgroup: replace signal_struct->group_rwsem with a global percpu_rwsem
  sched, cgroup: reorganize threadgroup locking
  cgroup: switch to unsigned long for bitmasks
  cgroup: reorganize include/linux/cgroup.h
  cgroup: separate out include/linux/cgroup-defs.h
  cgroup: fix some comment typos

Caused by commit 843735b7 ("power: axp288_charger: axp288 charger
driver") from the battery tree interacting with commit 046050f6
("extcon: Update the prototype of extcon_register_notifier() with enum
extcon") from the extcon tree.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull dma-buf updates from Sumit Semwal:
 "Minor changes for 4.2

   - add ref-counting for kernel modules as exporters
   - minor code style fixes"

* tag 'dma-buf-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf:
  dma-buf: Minor coding style fixes
  dma-buf: add ref counting for module as exporter

Pull USB updates from Greg KH:
 "Here's the big USB patchset for 4.2-rc1.  As is normal these days, the
  majority of changes are in the gadget drivers, with a bunch of other
  small driver changes.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits)
  usb: dwc3: Use ASCII space in Kconfig
  usb: chipidea: add work-around for Marvell HSIC PHY startup
  usb: chipidea: allow multiple instances to use default ci_default_pdata
  dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
  phy: add Marvell HSIC 28nm PHY
  phy: Add Marvell USB 2.0 OTG 28nm PHY
  dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
  USB: ssb: use devm_kzalloc
  USB: ssb: fix error handling in ssb_hcd_create_pdev()
  usb: isp1760: check for null return from kzalloc
  cdc-acm: Add support of ATOL FPrint fiscal printers
  usb: chipidea: usbmisc_imx: Remove unneeded semicolon
  USB: usbtmc: add device quirk for Rigol DS6104
  USB: serial: mos7840: Use setup_timer
  phy: twl4030-usb: add ABI documentation
  phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function.
  phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback.
  phy: twl4030-usb: make runtime pm more reliable.
  drivers:usb:fsl: Fix compilation error for fsl ehci drv
  usb: renesas_usbhs: Don't disable the pipe if Control write status stage
  ...

Pull tty/serial driver updates from Greg KH:
 "Here's the tty and serial driver patches for 4.2-rc1.

  A number of individual driver updates, some code cleanups, and other
  minor things, full details in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits)
  Doc: serial-rs485.txt: update RS485 driver interface
  Doc: tty.txt: remove mention of the BKL
  MAINTAINERS: tty: add serial docs directory
  serial: sprd: check for NULL after calling devm_clk_get
  serial: 8250_pci: Correct uartclk for xr17v35x expansion chips
  serial: 8250_pci: Add support for 12 port Exar boards
  serial: 8250_uniphier: add bindings document for UniPhier UART
  serial: core: cleanup in uart_get_baud_rate()
  serial: stm32-usart: Add STM32 USART Driver
  tty/serial: kill off set_irq_flags usage
  tty: move linux/gsmmux.h to uapi
  doc: dt: add documentation for nxp,lpc1850-uart
  serial: 8250: add LPC18xx/43xx UART driver
  serial: 8250_uniphier: add UniPhier serial driver
  serial: 8250_dw: support ACPI platforms with integrated DMA engine
  serial: of_serial: check the return value of clk_prepare_enable()
  serial: of_serial: use devm_clk_get() instead of clk_get()
  serial: earlycon: Add support for big-endian MMIO accesses
  serial: sirf: use hrtimer for data rx
  serial: sirf: correct the fifo empty_bit
  ...

Pull staging driver updates from Greg KH:
 "Here's the big, really big, staging tree patches for 4.2-rc1.

  Loads of stuff in here, almost all just coding style fixes / churn,
  and a few new drivers as well, one of which I just disabled from the
  build a few minutes ago due to way too many build warnings.

  Other than the one "disable this driver" patch, all of these have been
  in linux-next for quite a while with no reported issues"

* tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1163 commits)
  staging: wilc1000: disable driver due to build warnings
  Staging: rts5208: fix CHANGE_LINK_STATE value
  Staging: sm750fb: ddk750_swi2c.c: Insert spaces before parenthesis
  Staging: sm750fb: ddk750_swi2c.c: Place braces on correct lines
  Staging: sm750fb: ddk750_swi2c.c: Insert spaces around operators
  Staging: sm750fb: ddk750_swi2c.c: Replace spaces with tabs
  Staging: sm750fb: ddk750_swi2c.h: Shorten lines to under 80 characters
  Staging: sm750fb: ddk750_swi2c.h: Replace spaces with tabs
  Staging: sm750fb: modedb.h: Shorten lines to under 80 characters
  Staging: sm750fb: modedb.h: Replace spaces with tabs
  staging: comedi: addi_apci_3120: rename 'this_board' variables
  staging: comedi: addi_apci_1516: rename 'this_board' variables
  staging: comedi: ni_atmio: cleanup ni_getboardtype()
  staging: comedi: vmk80xx: sanity check context used to get the boardinfo
  staging: comedi: vmk80xx: rename 'boardinfo' variables
  staging: comedi: dt3000: rename 'this_board' variables
  staging: comedi: adv_pci_dio: rename 'this_board' variables
  staging: comedi: cb_pcidas64: rename 'thisboard' variables
  staging: comedi: cb_pcidas: rename 'thisboard' variables
  staging: comedi: me4000: rename 'thisboard' variables
  ...

Pull driver core updates from Greg KH:
 "Here is the driver core / firmware changes for 4.2-rc1.

  A number of small changes all over the place in the driver core, and
  in the firmware subsystem.  Nothing really major, full details in the
  shortlog.  Some of it is a bit of churn, given that the platform
  driver probing changes was found to not work well, so they were
  reverted.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits)
  Revert "base/platform: Only insert MEM and IO resources"
  Revert "base/platform: Continue on insert_resource() error"
  Revert "of/platform: Use platform_device interface"
  Revert "base/platform: Remove code duplication"
  firmware: add missing kfree for work on async call
  fs: sysfs: don't pass count == 0 to bin file readers
  base:dd - Fix for typo in comment to function driver_deferred_probe_trigger().
  base/platform: Remove code duplication
  of/platform: Use platform_device interface
  base/platform: Continue on insert_resource() error
  base/platform: Only insert MEM and IO resources
  firmware: use const for remaining firmware names
  firmware: fix possible use after free on name on asynchronous request
  firmware: check for file truncation on direct firmware loading
  firmware: fix __getname() missing failure check
  drivers: of/base: move of_init to driver_init
  drivers/base: cacheinfo: fix annoying typo when DT nodes are absent
  sysfs: disambiguate between "error code" and "failure" in comments
  driver-core: fix build for !CONFIG_MODULES
  driver-core: make __device_attach() static
  ...

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver pull request for 4.2-rc1.

  Lots of mei, extcon, coresight, uio, mic, and other driver updates in
  here.  Full details in the shortlog.  All of these have been in
  linux-next for some time with no reported problems"

* tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits)
  mei: me: wait for power gating exit confirmation
  mei: reset flow control on the last client disconnection
  MAINTAINERS: mei: add mei_cl_bus.h to maintained file list
  misc: sram: sort and clean up included headers
  misc: sram: move reserved block logic out of probe function
  misc: sram: add private struct device and virt_base members
  misc: sram: report correct SRAM pool size
  misc: sram: bump error message level on unclean driver unbinding
  misc: sram: fix device node reference leak on error
  misc: sram: fix enabled clock leak on error path
  misc: mic: Fix reported static checker warning
  misc: mic: Fix randconfig build error by including errno.h
  uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config
  uio: pruss: Add CONFIG_HAS_IOMEM dependence
  uio: pruss: Include <linux/sizes.h>
  extcon: Redefine the unique id of supported external connectors without 'enum extcon' type
  char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration().
  Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion
  parport: check exclusive access before register
  w1: use correct lock on error in w1_seq_show()
  ...

Pull tracing updates from Steven Rostedt:
 "This patch series contains several clean ups and even a new trace
  clock "monitonic raw".  Also some enhancements to make the ring buffer
  even faster.  But the biggest and most noticeable change is the
  renaming of the ftrace* files, structures and variables that have to
  deal with trace events.

  Over the years I've had several developers tell me about their
  confusion with what ftrace is compared to events.  Technically,
  "ftrace" is the infrastructure to do the function hooks, which include
  tracing and also helps with live kernel patching.  But the trace
  events are a separate entity altogether, and the files that affect the
  trace events should not be named "ftrace".  These include:

    include/trace/ftrace.h         ->    include/trace/trace_events.h
    include/linux/ftrace_event.h   ->    include/linux/trace_events.h

  Also, functions that are specific for trace events have also been renamed:

    ftrace_print_*()               ->    trace_print_*()
    (un)register_ftrace_event()    ->    (un)register_trace_event()
    ftrace_event_name()            ->    trace_event_name()
    ftrace_trigger_soft_disabled() ->    trace_trigger_soft_disabled()
    ftrace_define_fields_##call()  ->    trace_define_fields_##call()
    ftrace_get_offsets_##call()    ->    trace_get_offsets_##call()

  Structures have been renamed:

    ftrace_event_file              ->    trace_event_file
    ftrace_event_{call,class}      ->    trace_event_{call,class}
    ftrace_event_buffer            ->    trace_event_buffer
    ftrace_subsystem_dir           ->    trace_subsystem_dir
    ftrace_event_raw_##call        ->    trace_event_raw_##call
    ftrace_event_data_offset_##call->    trace_event_data_offset_##call
    ftrace_event_type_funcs_##call ->    trace_event_type_funcs_##call

  And a few various variables and flags have also been updated.

  This has been sitting in linux-next for some time, and I have not
  heard a single complaint about this rename breaking anything.  Mostly
  because these functions, variables and structures are mostly internal
  to the tracing system and are seldom (if ever) used by anything
  external to that"

* tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  ring_buffer: Allow to exit the ring buffer benchmark immediately
  ring-buffer-benchmark: Fix the wrong type
  ring-buffer-benchmark: Fix the wrong param in module_param
  ring-buffer: Add enum names for the context levels
  ring-buffer: Remove useless unused tracing_off_permanent()
  ring-buffer: Give NMIs a chance to lock the reader_lock
  ring-buffer: Add trace_recursive checks to ring_buffer_write()
  ring-buffer: Allways do the trace_recursive checks
  ring-buffer: Move recursive check to per_cpu descriptor
  ring-buffer: Add unlikelys to make fast path the default
  tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call()
  tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call()
  tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call
  tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call
  tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call
  tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled()
  tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_*
  tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir
  tracing: Rename ftrace_event_name() to trace_event_name()
  tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX
  ...

Pull tracing fixes from Steven Rostedt:
 "This isn't my 4.2 pull request (yet).  I found a few more bugs that I
  would have sent to fix 4.1, but since 4.1 is already out, I'm sending
  this before sending my 4.2 request (which is ready to go).

  After fixing the previous filter issue reported by Vince Weaver, I
  could not come up with a situation where the operand counter (cnt)
  could go below zero, so I added a WARN_ON_ONCE(cnt < 0).  Vince was
  able to trigger that warn on with his fuzzer test, but didn't have a
  filter input that caused it.

  Later, Sasha Levin was able to trigger that same warning, and was able
  to give me the filter string that triggered it.  It was simply a
  single operation ">".

  I wrapped the filtering code in a userspace program such that I could
  single step through the logic.  With a single operator the operand
  counter can legitimately go below zero, and should be reported to the
  user as an error, but should not produce a kernel warning.  The
  WARN_ON_ONCE(cnt < 0) should be just a "if (cnt < 0) break;" and the
  code following it will produce the error message for the user.

  While debugging this, I found that there was another bug that let the
  pointer to the filter string go beyond the filter string.  This too
  was fixed.

  Finally, there was a typo in a stub function that only gets compiled
  if trace events is disabled but tracing is enabled (I'm not even sure
  that's possible)"

* tag 'trace-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix typo from "static inlin" to "static inline"
  tracing/filter: Do not allow infix to exceed end of string
  tracing/filter: Do not WARN on operand count going below zero

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.2.

  I've one other new driver from freescale on my radar, it's been posted
  and reviewed, I'd just like to get someone to give it a last look, so
  maybe I'll send it or maybe I'll leave it.

  There is no major nouveau changes in here, Ben was working on
  something big, and we agreed it was a bit late, there wasn't anything
  else he considered urgent to merge.

  There might be another msm pull for some bits that are waiting on
  arm-soc, I'll see how we time it.

  This touches some "of" stuff, acks are in place except for the fixes
  to the build in various configs,t hat I just applied.

  Summary:

  New drivers:
      - virtio-gpu:
                KMS only pieces of driver for virtio-gpu in qemu.
                This is just the first part of this driver, enough to run
                unaccelerated userspace on. As qemu merges more we'll start
                adding the 3D features for the virgl 3d work.
      - amdgpu:
                a new driver from AMD to driver their newer GPUs. (VI+)
                It contains a new cleaner userspace API, and is a clean
                break from radeon moving forward, that AMD are going to
                concentrate on. It also contains a set of register headers
                auto generated from AMD internal database.

  core:
      - atomic modesetting API completed, enabled by default now.
      - Add support for mode_id blob to atomic ioctl to complete interface.
      - bunch of Displayport MST fixes
      - lots of misc fixes.

  panel:
      - new simple panels
      - fix some long-standing build issues with bridge drivers

  radeon:
      - VCE1 support
      - add a GPU reset counter for userspace
      - lots of fixes.

  amdkfd:
      - H/W debugger support module
      - static user-mode queues
      - support killing all the waves when a process terminates
      - use standard DECLARE_BITMAP

  i915:
      - Add Broxton support
      - S3, rotation support for Skylake
      - RPS booting tuning
      - CPT modeset sequence fixes
      - ns2501 dither support
      - enable cmd parser on haswell
      - cdclk handling fixes
      - gen8 dynamic pte allocation
      - lots of atomic conversion work

  exynos:
      - Add atomic modesetting support
      - Add iommu support
      - Consolidate drm driver initialization
      - and MIC, DECON and MIPI-DSI support for exynos5433

  omapdrm:
      - atomic modesetting support (fixes lots of things in rewrite)

  tegra:
      - DP aux transaction fixes
      - iommu support fix

  msm:
      - adreno a306 support
      - various dsi bits
      - various 64-bit fixes
      - NV12MT support

  rcar-du:
      - atomic and misc fixes

  sti:
      - fix HDMI timing complaince

  tilcdc:
      - use drm component API to access tda998x driver
      - fix module unloading

  qxl:
      - stability fixes"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (872 commits)
  drm/nouveau: Pause between setting gpu to D3hot and cutting the power
  drm/dp/mst: close deadlock in connector destruction.
  drm: Always enable atomic API
  drm/vgem: Set unique to "vgem"
  of: fix a build error to of_graph_get_endpoint_by_regs function
  drm/dp/mst: take lock around looking up the branch device on hpd irq
  drm/dp/mst: make sure mst_primary mstb is valid in work function
  of: add EXPORT_SYMBOL for of_graph_get_endpoint_by_regs
  ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi'
  drm/atomic: Don't set crtc_state->enable manually
  drm/exynos: dsi: do not set TE GPIO direction by input
  drm/exynos: dsi: add support for MIC driver as a bridge
  drm/exynos: dsi: add support for Exynos5433
  drm/exynos: dsi: make use of array for clock access
  drm/exynos: dsi: make use of driver data for static values
  drm/exynos: dsi: add macros for register access
  drm/exynos: dsi: rename pll_clk to sclk_clk
  drm/exynos: mic: add MIC driver
  of: add helper for getting endpoint node of specific identifiers
  drm/exynos: add Exynos5433 decon driver
  ...

Pull device mapper fixes from Mike Snitzer:
 "Apologies for not pressing this request-based DM partial completion
  issue further, it was an oversight on my part.  We'll have to get it
  fixed up properly and revisit for a future release.

   - Revert block and DM core changes the removed request-based DM's
     ability to handle partial request completions -- otherwise with the
     current SCSI LLDs these changes could lead to silent data
     corruption.

   - Fix two DM version bumps that were missing from the initial 4.2 DM
     pull request (enabled userspace lvm2 to know certain changes have
     been made)"

* tag 'dm-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache policy smq: fix "default" version to be 1.4.0
  dm: bump the ioctl version to 4.32.0
  Revert "block, dm: don't copy bios for request clones"
  Revert "dm: do not allocate any mempools for blk-mq request-based DM"

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - move -O0 jitterentropy code into its own file instead of using gcc
     pragma magic.

   - kill testmgr warning for gcm-aes-aesni.

   - fix build failure in old rsa.

  Other minor fixes:

   - ignore asn1 files generated by new rsa.

   - remove unnecessary kzfree NULL checks in jitterentropy.

   - typo fix in akcipher"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: rsa - add .gitignore for crypto/*.-asn1.[ch] files
  crypto: asymmetric_keys/rsa - Use non-conflicting variable name
  crypto: testmgr - don't print info about missing test for gcm-aes-aesni
  crypto: jitterentropy - Delete unnecessary checks before the function call "kzfree"
  crypto: akcipher - fix spelling cihper -> cipher
  crypto: jitterentropy - avoid compiler warnings

Pull ARM updates from Russell King:
 "Bigger items included in this update are:

   - A series of updates from Arnd for ARM randconfig build failures
   - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to
     drivers/irqchip/
   - Move ARMs SP804 timer to drivers/clocksource/
   - Perf updates from Mark Rutland in preparation to move the ARM perf
     code into drivers/ so it can be shared with ARM64.
   - MCPM updates from Nicolas
   - Add support for taking platform serial number from DT
   - Re-implement Keystone2 physical address space switch to conform to
     architecture requirements
   - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2
     changes.
   - L2C cleanups to avoid unlocking caches if we're prevented by the
     secure support to unlock.
   - Avoid cleaning a potentially dirty cache containing stale data on
     CPU initialisation
   - Add ARM-only entry point for secondary startup (for machines that
     can only call into a Thumb kernel in ARM mode).  Same thing is also
     done for the resume entry point.
   - Provide arch_irqs_disabled via asm-generic
   - Enlarge ARMv7M vector table
   - Always use BFD linker for VDSO, as gold doesn't accept some of the
     options we need.
   - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all
     BSYM compiler macros to a "badr" (for branch address).
   - Shut up compiler warnings provoked by our cmpxchg() implementation.
   - Ensure bad xchg sizes fail to link"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits)
  ARM: Fix build if CLKDEV_LOOKUP is not configured
  ARM: fix new BSYM() usage introduced via for-arm-soc branch
  ARM: 8383/1: nommu: avoid deprecated source register on mov
  ARM: 8391/1: l2c: add options to overwrite prefetching behavior
  ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic
  ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap
  ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone
  ARM: 8384/1: VDSO: force use of BFD linker
  ARM: 8385/1: VDSO: group link options
  ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
  ARM: remove __bad_xchg definition
  ARM: 8369/1: ARMv7M: define size of vector table for Vybrid
  ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK
  ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource
  ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion
  ARM: 8364/1: fix BE32 module loading
  ARM: 8360/1: add secondary_startup_arm prototype in header file
  ARM: 8359/1: correct secondary_startup_arm mode
  ARM: proc-v7: sanitise and document registers around errata
  ARM: proc-v7: clean up MIDR access
  ...

Pull ARM SoC defconfig updates from Kevin Hilman:
 "We keep collecting defconfig updates in a separate branch mostly to
  encourage people to handle them separately and avoid conflicts between
  different topics.

  Most of these are enablement of new SoCs, boards or drivers that have
  come in, or minor config refreshes due to reorderings in Kconfig
  files, etc.  I.e. mostly minor churn of various kinds"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: multi_v7_defconfig: remove duplicate CONFIG_COMMON_CLK_QCOM=y
  ARM: multi_v7_defconfig: Enable display on Trats2 board
  ARM64: add GPIO keys to the defconfig
  ARM: keystone: defconfig: enable netcp driver by default
  ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for Odroid-XU3
  ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for Odroid-XU3
  ARM: omap2plus_defconfig: Enable TOUCHSCREEN_PIXCIR
  ARM: omap2plus_defconfig: Add dm816x USB PHY as a loadable module
  ARM: omap2plus_defconifg: Enable DM9000 in omap2plus_defconfig
  ARM: lpc18xx: remove DEBUG_LL_UART_8250 from defconfig
  ARM: multi_v7_defconfig: Make media support modular
  ARM: multi_v7_defconfig: Make sound support modular
  ARM: multi_v7_defconfig: Enable shmobile r8a7778/bockw platform
  ARM: exynos_defconfig: savedefconfig
  ARM: exynos_defconfig: Enable display on Trats2 board
  ARM: multi_v7_defconfig: Enable OHCI on exynos SoCs
  ARM: multi_v7_defconfig: Enable TMU for exynos SoCs
  ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for exynos
  ARM: multi_v7_defconfig: Enable CPU idle for exynos SoCs
  ARM: multi_v7_defconfig: Enable Cypress APA I2C Trackpad support
  ...