- 02 8月, 2011 4 次提交
-
-
由 Jesper Juhl 提交于
Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
My @hp.com will no longer be valid starting August 5, 2011 so an update is necessary. My new email address is employer independent so we don't have to worry about doing this again any time soon. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NPaul Moore <paul@paul-moore.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
My @hp.com will no longer be valid starting August 5, 2011 so an update is necessary. My new email address is employer independent so we don't have to worry about doing this again any time soon. Signed-off-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NPaul Moore <paul@paul-moore.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
Reported-by: NPascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 8月, 2011 4 次提交
-
-
由 Eric Dumazet 提交于
commit 8efa8854 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. With help from Michal Soltys and Michal Pokrywka, who did a bisection. Bugzilla ref: https://bugzilla.kernel.org/show_bug.cgi?id=39372 Debian ref: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631945Reported-by: NLucas Bocchi <lucas.bocchi@gmail.com> Reported-and-bisected-by: NMichal Pokrywka <wolfmoon@o2.pl> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Michal Soltys <soltys@ziu.info> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Convert array index from the loop bound to the loop index. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,ar; @@ for(e1 = 0; e1 < e2; e1++) { <... ar[ - e2 + e1 ] ...> } // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Convert array index from the loop bound to the loop index. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,ar; @@ for(e1 = 0; e1 < e2; e1++) { <... ar[ - e2 + e1 ] ...> } // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 7月, 2011 7 次提交
-
-
由 Oleg Nesterov 提交于
proc_fork_connector() uses ->real_parent lockless. This is not safe if copy_process() was called with CLONE_THREAD or CLONE_PARENT, in this case the parent != current can go away at any moment. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning in sunrpc: Warning(net/sunrpc/xprt.c:196): No description found for parameter 'xprt' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennart Sorensen 提交于
The D-Link DGE-530T rev C1 is a re-badged Realtek 8169 named DLG10028C, unlike the previous revisions which were skge based. It is probably the same as the discontinued DGE-528T (0x4300) other than the PCI ID. The PCI ID is 0x1186:0x4302. Adding it to r8169.c where 0x1186:0x4300 is already found makes the card be detected and work. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=38862Signed-off-by: NLen Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Mike McLagan hasn't contributed in many years and his email bounces. Signed-off-by: NJoe Perches <joe@perches.com> Cc: David Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Klement Fish 提交于
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=34552Signed-off-by: NKlement Fish <klement2@azet.sk> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tushar Gohad 提交于
Fix the min and max bit lengths for AES-CTR (RFC3686) keys. The number of bits in key spec is the key length (128/256) plus 32 bits of nonce. This change takes care of the "Invalid key length" errors reported by setkey when specifying 288 bit keys for aes-ctr. Signed-off-by: NTushar Gohad <tgohad@mvista.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
- 28 7月, 2011 25 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: n2_crypto: Attach on Niagara-T3. n2rng: Attach on Niagara-T3. sparc: Detect and handle UltraSPARC-T3 cpu types. sparc: Don't do expensive hypervisor PCR write unless necessary. sparc: Add T3 sun4v cpu type and hypervisor group defines. sparc: Don't leave sparc_pmu_type NULL on sun4v.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits) tg3: Remove 5719 jumbo frames and TSO blocks tg3: Break larger frags into 4k chunks for 5719 tg3: Add tx BD budgeting code tg3: Consolidate code that calls tg3_tx_set_bd() tg3: Add partial fragment unmapping code tg3: Generalize tg3_skb_error_unmap() tg3: Remove short DMA check for 1st fragment tg3: Simplify tx bd assignments tg3: Reintroduce tg3_tx_ring_info ASIX: Use only 11 bits of header for data size ASIX: Simplify condition in rx_fixup() Fix cdc-phonet build bonding: reduce noise during init bonding: fix string comparison errors net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared net: add IFF_SKB_TX_SHARED flag to priv_flags net: sock_sendmsg_nosec() is static forcedeth: fix vlans gianfar: fix bug caused by 87c288c6 gro: Only reset frag0 when skb can be pulled ...
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: (75 commits) md/raid10: handle further errors during fix_read_error better. md/raid10: Handle read errors during recovery better. md/raid10: simplify read error handling during recovery. md/raid10: record bad blocks due to write errors during resync/recovery. md/raid10: attempt to fix read errors during resync/check md/raid10: Handle write errors by updating badblock log. md/raid10: clear bad-block record when write succeeds. md/raid10: avoid writing to known bad blocks on known bad drives. md/raid10 record bad blocks as needed during recovery. md/raid10: avoid reading known bad blocks during resync/recovery. md/raid10 - avoid reading from known bad blocks - part 3 md/raid10: avoid reading from known bad blocks - part 2 md/raid10: avoid reading from known bad blocks - part 1 md/raid10: Split handle_read_error out from raid10d. md/raid10: simplify/reindent some loops. md/raid5: Clear bad blocks on successful write. md/raid5. Don't write to known bad block on doubtful devices. md/raid5: write errors should be recorded as bad blocks if possible. md/raid5: use bad-block log to improve handling of uncorrectable read errors. md/raid5: avoid reading from known bad blocks. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: oss: rename local change_bits to avoid powerpc bitsops.h definition ALSA: hda - Fix duplicated DAC assignments for Realtek ALSA: asihpi - off by one in asihpi_hpi_ioctl() ALSA: hda - Fix Oops with Realtek quirks with NULL adc_nids ALSA: asihpi - bug fix pa use before init. ALSA: hda - Add support for vref-out based mute LED control on IDT codecs
-
由 David S. Miller 提交于
A small modification was necessary since in the machine description for 'n2cp' and 'ncp' nodes, there no longer is an 'intr' property. That's OK because this property was always nothing more than an array of integers '1' ... 'nr_inos + 1' so we can just compute it in-place. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
And stop referring to Victoria Falls, as the attribute we're talking about is whether the rng is multi-unit capable which applies to several chip variants now. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The A0 revision of this chip is the only device that requires these features to be disabled. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The 5719 has bug where RDMAs larger than 4k can cause problems. This patch works around the problem by dividing larger DMA requests into something the hardware can handle. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
As the driver breaks large skb fragments into smaller submissions to the hardware, there is a new danger that BDs might get exhausted before all fragments have been mapped. This patch adds code to make sure tx BDs aren't oversubscribed and flag the condition if it happens. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch consolidates all code that populates tx BDs into a single routine. Setting tx BDs needs to be more carefully controlled to see if workarounds need to be applied. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The following patches are going to break skb fragments into smaller sizes. This patch attempts to make the change easier to digest by only addressing the skb teardown portion. The patch modifies the driver to skip over any BDs that have a flag set that indicates the BD isn't the beginning of an skb fragment. Such BDs were a result of segmentation and do not need a pci_unmap_page() call. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
In the following patches, unmapping skb fragments will get just as complicated as mapping them. This patch generalizes tg3_skb_error_unmap() and makes it the one-stop-shop for skb unmapping. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The first fragment of an skb should always be greater than 8 bytes. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
In the following patches, the process the driver will use to assign skb fragments to transmit BDs will get more complicated. To prepare for that new code, this patch seeks to simplify how transmit BDs are populated. It does this by separating the code that assigns the BD members from the logic that controls how the fields are set. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The following patches will require the use of an additional flag in the ring_info structure. The use of this flag is tx path specific, so this patch defines a specialized ring_info structure. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marek Vasut 提交于
The AX88772B uses only 11 bits of the header for the actual size. The other bits are used for something else. This causes dmesg full of messages: asix_rx_fixup() Bad Header Length This patch trims the check to only 11 bits. I believe on older chips, the remaining 5 top bits are unused. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Clayton 提交于
Try to send to correct address this time! ---------- Forwarded Message ---------- Subject: [PATCH] Fix cdc-phonet build Date: Saturday 23 Jul 2011 From: Chris Clayton <chris2553@googlemail.com> To: linux-net@vger.kernel.org cdc-phonet does not presently build on linux-3.0 because there is no entry for it in drivers/net/Makefile. This patch adds that entry. Signed-off-by: NChris Clayton <chris2553@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Gospodarek 提交于
On Tue, Jul 26, 2011 at 05:40:27PM -0700, Joe Perches wrote: > On Tue, 2011-07-26 at 17:37 -0700, Jay Vosburgh wrote: > > Joe Perches <joe@perches.com> wrote: > > >I'd prefer you don't separate the format string > > >into multiple pieces. > > Why not? To me, it looks easier to read split into sections > > that don't wrap lines. > > Harder to grep for a dmesg and the > defect rate of these split formats is > typically higher than single strings > because of bad spacing between string > segments. > I noticed that you took some time back in late 2009 to 'consolidate' the split format-strings present in the bonding driver at the time and I've decided I'm fine to leave them the way they are. The main point of my patch was to change the output and I would like to get that included. Here is my updated patch... Subject: [PATCH net-next-2.6 v2] bonding: reduce noise during init Many are using sysfs to configure bonding rather than module options, so there is no need for bonding to throw this warning in normal cases. Keep the message around when debugging is enabled as it might be useful for someone desperate enough to enable debugging, but eliminate it otherwise. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Gospodarek 提交于
When a bond contains a device where one name is the subset of another (eth1 and eth10, for example), one cannot properly set the primary device or the currently active device. This was reported and based on work by Takuma Umeya. I also verified the problem and tested that this fix resolves it. V2: A few did not like the the current code or my changes, so I refactored bonding_store_primary and bonding_store_active_slave to be a bit cleaner, dropped the use of strnicmp since we did not really need the comparison to be case insensitive, and formatted the input string from sysfs so a comparison to IFNAMSIZ could be used. I also discovered an error in bonding_store_active_slave that would modify bond->primary_slave rather than bond->curr_active_slave before forcing the bonding driver to choose a new active slave. V3: Actually sending the proper patch.... Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Reported-by: NTakuma Umeya <tumeya@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: Karsten Keil <isdn@linux-pingi.de> CC: "David S. Miller" <davem@davemloft.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Patrick McHardy <kaber@trash.net> CC: Krzysztof Halasa <khc@pm.waw.pl> CC: "John W. Linville" <linville@tuxdriver.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
Pktgen attempts to transmit shared skbs to net devices, which can't be used by some drivers as they keep state information in skbs. This patch adds a flag marking drivers as being able to handle shared skbs in their tx path. Drivers are defaulted to being unable to do so, but calling ether_setup enables this flag, as 90% of the drivers calling ether_setup touch real hardware and can handle shared skbs. A subsequent patch will audit drivers to ensure that the flag is set properly Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Reported-by: NJiri Pirko <jpirko@redhat.com> CC: Robert Olsson <robert.olsson@its.uu.se> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Alexey Dobriyan <adobriyan@gmail.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Anton Blanchard <anton@samba.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
For some reason, when rxaccel is disabled, NV_RX3_VLAN_TAG_PRESENT is still set and some pseudorandom vids appear. So check for NETIF_F_HW_VLAN_RX as well. Also set correctly hw_features and set vlan mode on probe. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sebastian Pöhn 提交于
commit 87c288c6 "gianfar: do vlan cleanup" has two issues: # permutation of rx and tx flags # enabling vlan tag insertion by default (this leads to unusable connections on some configurations) If VLAN insertion is requested (via ethtool) it will be set at an other point ... Signed-off-by: NSebastian Poehn <sebastian.poehn@belden.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-