提交 550fd08c 编写于 作者: N Neil Horman 提交者: David S. Miller

net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared

After the last patch, We are left in a state in which only drivers calling
ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real
hardware call ether_setup for their net_devices and don't hold any state in
their skbs.  There are a handful of drivers that violate this assumption of
course, and need to be fixed up.  This patch identifies those drivers, and marks
them as not being able to support the safe transmission of skbs by clearning the
IFF_TX_SKB_SHARING flag in priv_flags
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: Karsten Keil <isdn@linux-pingi.de>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Patrick McHardy <kaber@trash.net>
CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: "John W. Linville" <linville@tuxdriver.com>
CC: Greg Kroah-Hartman <gregkh@suse.de>
CC: Marcel Holtmann <marcel@holtmann.org>
CC: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d8873315
......@@ -2532,6 +2532,9 @@ static void _isdn_setup(struct net_device *dev)
/* Setup the generic properties */
dev->flags = IFF_NOARP|IFF_POINTOPOINT;
/* isdn prepends a header in the tx path, can't share skbs */
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
dev->header_ops = NULL;
dev->netdev_ops = &isdn_netdev_ops;
......
......@@ -1557,8 +1557,10 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
if (slave_dev->type != ARPHRD_ETHER)
bond_setup_by_slave(bond_dev, slave_dev);
else
else {
ether_setup(bond_dev);
bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
}
netdev_bonding_change(bond_dev,
NETDEV_POST_TYPE_CHANGE);
......@@ -4330,7 +4332,7 @@ static void bond_setup(struct net_device *bond_dev)
bond_dev->tx_queue_len = 0;
bond_dev->flags |= IFF_MASTER|IFF_MULTICAST;
bond_dev->priv_flags |= IFF_BONDING;
bond_dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
bond_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
/* At first, we block adding VLANs. That's the only way to
* prevent problems that occur when adding VLANs over an
......
......@@ -183,7 +183,7 @@ static void ifb_setup(struct net_device *dev)
dev->flags |= IFF_NOARP;
dev->flags &= ~IFF_MULTICAST;
dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
random_ether_addr(dev->dev_addr);
}
......
......@@ -572,7 +572,7 @@ void macvlan_common_setup(struct net_device *dev)
{
ether_setup(dev);
dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
dev->netdev_ops = &macvlan_netdev_ops;
dev->destructor = free_netdev;
dev->header_ops = &macvlan_hard_header_ops,
......
......@@ -528,6 +528,7 @@ static void tun_net_init(struct net_device *dev)
dev->netdev_ops = &tap_netdev_ops;
/* Ethernet TAP Device */
ether_setup(dev);
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
random_ether_addr(dev->dev_addr);
......
......@@ -263,6 +263,8 @@ static void veth_setup(struct net_device *dev)
{
ether_setup(dev);
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
dev->netdev_ops = &veth_netdev_ops;
dev->ethtool_ops = &veth_ethtool_ops;
dev->features |= NETIF_F_LLTX;
......
......@@ -1074,9 +1074,10 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
used = pvc_is_used(pvc);
if (type == ARPHRD_ETHER)
if (type == ARPHRD_ETHER) {
dev = alloc_netdev(0, "pvceth%d", ether_setup);
else
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
} else
dev = alloc_netdev(0, "pvc%d", pvc_setup);
if (!dev) {
......
......@@ -2823,6 +2823,7 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
dev->wireless_data = &ai->wireless_data;
dev->irq = irq;
dev->base_addr = port;
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
SET_NETDEV_DEV(dev, dmdev);
......
......@@ -855,6 +855,7 @@ void hostap_setup_dev(struct net_device *dev, local_info_t *local,
iface = netdev_priv(dev);
ether_setup(dev);
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
/* kernel callbacks */
if (iface) {
......
......@@ -6179,6 +6179,7 @@ int ar6000_create_ap_interface(struct ar6_softc *ar, char *ap_ifname)
ether_setup(dev);
init_netdev(dev, ap_ifname);
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
if (register_netdev(dev)) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_create_ap_interface: register_netdev failed\n"));
......
......@@ -695,7 +695,7 @@ void vlan_setup(struct net_device *dev)
ether_setup(dev);
dev->priv_flags |= IFF_802_1Q_VLAN;
dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
dev->tx_queue_len = 0;
dev->netdev_ops = &vlan_netdev_ops;
......
......@@ -231,6 +231,7 @@ void bnep_net_setup(struct net_device *dev)
dev->addr_len = ETH_ALEN;
ether_setup(dev);
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
dev->netdev_ops = &bnep_netdev_ops;
dev->watchdog_timeo = HZ * 2;
......
......@@ -103,7 +103,7 @@ static struct net_device_ops l2tp_eth_netdev_ops = {
static void l2tp_eth_dev_setup(struct net_device *dev)
{
ether_setup(dev);
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
dev->netdev_ops = &l2tp_eth_netdev_ops;
dev->destructor = free_netdev;
}
......
......@@ -698,6 +698,7 @@ static const struct net_device_ops ieee80211_monitorif_ops = {
static void ieee80211_if_setup(struct net_device *dev)
{
ether_setup(dev);
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
dev->netdev_ops = &ieee80211_dataif_ops;
dev->destructor = free_netdev;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册