The vendor-written driver for the RTL8187SE has a private variable
for the card type, even though it only occurs in PCI format.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When this code is used for the rtl8187se, the value of card_8185
in struct r8180_priv is always 7 or 8. As a result, the program
flow can be simplified.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Tested-by: NBernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMariusz Ziulek <mz.mzet@gmail.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes superfluous exclamation marks from strings and comments, and
also three spelling typos.
Signed-off-by: NSebastian Dalfuß <sd@sedf.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add driver support for the tsl2563 TAOS ambient light sensor. After looking at
discussions on LKML, the driver was modified from a 'hwmon' driver to an 'iio'
driver. The sysfs interfaces have been tested on an RX51 (N900) to see if it
responds to changing light conditions.

The only real reason for submitting this to staging is that it is dependent on
the IIO subsystem.
Signed-off-by: NAmit Kucheria <amit.kucheria@verdurent.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: linux-omap@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Spell-check wouln't catch these :)
Signed-off-by: NAmit Kucheria <amit.kucheria@verdurent.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix printk format warning:
drivers/staging/sep/sep_driver.c:276: warning: format '%08llx' expects type 'long long unsigned int', but argument 2 has type 'dma_addr_t'

and variable may be used uninitialized (correct):
drivers/staging/sep/sep_driver.c:1774: warning: 'error' may be used uninitialized in this function
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix printk format warnings in vt665[56]:

drivers/staging/vt6655/wpa.c:150: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6655/wpa.c:181: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'

drivers/staging/vt6656/wpa.c:150: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6656/wpa.c:181: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6656/firmware.c:804: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

max1363 uses both the iio hardware ring buffer and software
ring buffer interfaces, but its Makefile and Kconfig do not
reflect that usage, so its build breaks.  Add a new Kconfig
symbol to reflect that usage and change max1363.h & Makefile
to use the new Kconfig symbol.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>

USB device driver needs to depend on USB to prevent build errors:

ERROR: "usb_kill_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_deregister" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_control_msg" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_submit_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_register_driver" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_free_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "usb_alloc_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

`|' has a higher precedence than `?' so since MSG_WAITALL is
defined 0x100, MSG_MORE was always written to the msg_flag.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix incorrect use of mutex_trylock().
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The DMA resource allocation function is called "vme_request_dma" while
master and slave window allocation functions are called
"vme_master_request" and "vme_slave_request" respectively. Rename
"vme_request_dma" to "vme_dma_request" to fit the pattern.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* Remove message from IACK interrupt handler
* Correct clearing of location monitor interrupts
* Remove interrupt cleanup code that's duplcated in sub function
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The vme_lm_free() function is not clearing up the resource created in
vme_lm_request(). In addition vme_lm_free() is void function and is used in
exit/error paths, we should wait for mutex to become free rather than
exiting and not freeing the resource.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The TSI148 driver currently does not allow a size of zero to be passed to a
window. Zero is a valid value if the window is being disabled. Allow
windows to be disabled and their registers cleared.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It's causing people to ignore problems in the file, so get rid
of them so it's obvious something is wrong in the future.

Cc: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Currently the VME callback infrastructure is replicated in each VME driver.
Move this common code into the VME core. Rename functions to fit in better
with naming of other VME functions.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Eric Sesterhenn noticed that vme_user is overflowing an array used by
sprintf. Use a bigger array.

CC: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove unused #include <linux/version.h>('s) in
  drivers/staging/vme/bridges/vme_ca91cx42.c
  drivers/staging/vme/bridges/vme_tsi148.c
  drivers/staging/vme/devices/vme_user.c
  drivers/staging/vme/vme.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Acked-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The vt6656 driver is integrated in the kernel so it no longer needs the
compatibility header.
Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The vt6655 driver is integrated in the kernel so it no longer needs the
compatibility header.
Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

uNodeIndex is unsigned, check whether it is within bounds instead.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is based on next-20091106.
This tiny patch removes a few quite unnecessary extra newlines from
DBGPRINT() and printk() strings.
Signed-off-by: NSebastian Dalfuß <sd@sedf.de>
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The stuff that tries to read a file from /etc is already removed, so
this patch just removes the last remainders.
Signed-off-by: NSebastian Dalfuß <sd@sedf.de>
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

After the incorporation of the patch entitled "wext: refactor", some
of the wireless drivers in drivers/staging fail to build because they
need to have CONFIG_WIRELESS_EXT and CONFIG_WEXT_PRIV defined.

[ patch description borrowed from the previous fix for wireless staging
  drivers ("staging: Add proper selection of WIRELESS_EXT and WEXT_PRIV")
  authored by Larry Finger ]

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove misc typedefs.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove typedefs from rt_linux.h and rtmp_usb.h.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove typedefs from rtmp_type.h.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>