Fix new sparse warning about function declared static.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.

drivers/built-in.o: In function `lpc32xx_adc_probe':
drivers/staging/iio/adc/lpc32xx_adc.c:149: undefined reference to `devm_ioremap'
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.

drivers/built-in.o: In function `goldfish_battery_probe':
drivers/power/goldfish_battery.c:181: undefined reference to `devm_ioremap'
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.

drivers/built-in.o: In function `orion_mdio_probe':
drivers/net/ethernet/marvell/mvmdio.c:228: undefined reference to `devm_ioremap'
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.

drivers/built-in.o: In function `exynos_mipi_video_phy_probe':
drivers/phy/phy-exynos-mipi-video.c:130: undefined reference to `devm_ioremap_resource'
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.

drivers/staging/iio/adc/spear_adc.c: In function ‘spear_adc_probe’:
drivers/staging/iio/adc/spear_adc.c:393:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.

drivers/staging/dgap/dgap_driver.c: In function ‘dgap_cleanup_board’:
drivers/staging/dgap/dgap_driver.c:457:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
drivers/staging/dgap/dgap_driver.c: In function ‘dgap_do_remap’:
drivers/staging/dgap/dgap_driver.c:694:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration]
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.

drivers/ptp/ptp_pch.c: In function ‘pch_remove’:
drivers/ptp/ptp_pch.c:571:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
drivers/ptp/ptp_pch.c: In function ‘pch_probe’:
drivers/ptp/ptp_pch.c:621:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration]
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce functions to enable and disable bridgeport address
notification feature, sysfs attributes for access to these
functions from userspace, and udev events emitted when a host
joins or exits a bridgeport-enabled HiperSocket channel.
Signed-off-by: NEugene Crosser <eugene.crosser@ru.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Reviewed-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce function for the "Perform network-subchannel operation"
CHSC command with operation code "bridgeport information",
and bit definitions for "characteristics" pertaning to this command.
Signed-off-by: NEugene Crosser <eugene.crosser@ru.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce functions to assign roles and check state of bridgeport-capable
HiperSocket devices, and sysfs attributes providing access to these
functions from userspace. Introduce udev events emitted when the state
of a bridgeport device changes.
Signed-off-by: NEugene Crosser <eugene.crosser@ru.ibm.com>
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Reviewed-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

introduced by:
commit 1f9248e5
"neigh: convert parms to an array"
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes unhandled register write in gianfar_ethtool.c.
Fixes following endianess related functional issues,
reported by sparse as well, i.e.:

gianfar_ethtool.c:1058:33: warning:
    incorrect type in argument 1 (different base types)
    expected unsigned int [unsigned] [usertype] value
    got restricted __be32 [usertype] ip4src

gianfar_ethtool.c:1164:33: warning:
    restricted __be16 degrades to integer

gianfar_ethtool.c:1669:32: warning:
    invalid assignment: ^=
    left side has type restricted __be16
    right side has type int

Solves all the sparse warnings for mixig normal pointers
with __iomem pointers for gianfar_ptp.c, i.e.:
gianfar_ptp.c:163:32: warning:
    incorrect type in argument 1 (different address spaces)
    expected unsigned int [noderef] <asn:2>*addr
    got unsigned int *<noident>
Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Delete a variable that is at most only assigned to a constant, but never
used otherwise.  In this code, it is the variable result that is used for
the return code, not rc.

A simplified version of the semantic patch that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
identifier i;
constant c;
@@

-T i;
<... when != i
-i = c;
...>
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aaron Brown says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e from Greg Rose for VLAN filtering.

Greg Rose (2):
  i40e: Warn admin to reload VF driver on port VLAN configuration.
    When an administrator sets a port VLAN filters for the virtual
    function (VF) after the VF has already set its own VLAN filters a
    conflict requiring the VF be reloaded can occur.  This patch logs a
    message indicating to the system administrator that the VF driver
    must be reloaded for the new port VLAN settings to take effect

  i40e: Retain MAC filters on port VLAN deletion
    On port VLAN deletion the list of MAC filters for the virtual function
    (VF) VSI were all deleted.  Let's keep them around, they come in
    handy for keeping the VF functional.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On port VLAN deletion the list of MAC filters for the virtual function (VF)
VSI were all deleted.  Let's keep them around, they come in handy for keeping
the VF functional.

Change-Id: I335e760392f274dc8b8b40efcb708f65b49d7973
Signed-off-by: NGreg Rose <gregory.v.rose@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The i40e Physical Function (PF) driver will allow the
 Virtual Function (VF) driver to configure its own VLAN filters if no port
 VLAN filter has been configured.  This leads to the possibility of the
 administrator setting a port VLAN filter for the VF after the VF has already
 configured its own VLAN filters.  This leads to a conflict that can only be
 resolved by reloading the VF driver.  When the conflicting administrative
 command is detected in setting the port VLAN then log a message indicating to
 the system administrator that he must now reload the VF driver for the new
 port VLAN settings to take effect.

Change-Id: I8de73b885d944a043aff32226297e4249862bcad
Signed-off-by: NGreg Rose <gregory.v.rose@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
vxlan updates

Did the split into two patches upon request from Cong Wang.

Changelog:

 v1->v2:
  - Removed BUG_ON as it's not needed.
 v2->v3:
  - Removed dev->reg_state check for netns.
 v3->v4:
  - Removed list_del(), we seem to do it in some places and
    in some others not; we agreed it's not really necessary.
  - Split patch into 2 patches, notifier part and module
    unload cleanup part.
====================
Reviewed-by: NCong Wang <cwang@twopensource.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should use vxlan_dellink() handler in vxlan_exit_net(), since
i) we're not in fast-path and we should be consistent in dismantle
just as we would remove a device through rtnl ops, and more
importantly, ii) in case future code will kfree() memory in
vxlan_dellink(), we would leak it right here unnoticed. Therefore,
do not only half of the cleanup work, but make it properly.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can create a vxlan device with an explicit underlying carrier.
In that case, when the carrier link is being deleted from the
system (e.g. due to module unload) we should also clean up all
created vxlan devices on top of it since otherwise we're in an
inconsistent state in vxlan device. In that case, the user needs
to remove all such devices, while in case of other virtual devs
that sit on top of physical ones, it is usually the case that
these devices do unregister automatically as well and do not
leave the burden on the user.

This work is not necessary when vxlan device was not created with
a real underlying device, as connections can resume in that case
when driver is plugged again. But at least for the other cases,
we should go ahead and do the cleanup on removal.

We don't register the notifier during vxlan_newlink() here since
I consider this event rather rare, and therefore we should not
bloat vxlan's core structure unecessary. Also, we can simply make
use of unregister_netdevice_many() to batch that. fdb is flushed
upon ndo_stop().

E.g. `ip -d link show vxlan13` after carrier removal before
this patch:

5: vxlan13: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN mode DEFAULT group default
    link/ether 1e:47:da:6d:4d:99 brd ff:ff:ff:ff:ff:ff promiscuity 0
    vxlan id 13 group 239.0.0.10 dev 2 port 32768 61000 ageing 300
                                 ^^^^^
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aaron Brown says:

====================
Intel Wired LAN Driver Updates, ixgbe: Add LER support

The following patches add Live Error Recovery (LER) support to the
ixgbe driver. This support also improves behavior in Thunderbolt
environments. This involves checking all register reads for a
value of all ones and when that is seen, to read the status
register, which should never properly return all ones, to
confirm whether the received value was correct. When this detects
a removal, the hw_addr field is cleared to indicate the removal.
This then blocks subsequent access to the device registers.

All register access macros have been changed to static inline
functions and all register accesses now use them.· Macro versions
are temporarily provided.

The __IXGBE_DOWN bit is no longer overloaded to also mean that
device removal has been initiated. Now the bit can be used to
protect ixgbe_down from multiple entry via test_and_set_bit. A
needed smp_mb__before_clear_bit was also added.

V2 Changes:
- Use ACCESS_ONCE where needed, thanks to Ben Hutchings
- Fix crash on module removal
- Use boolean values for boolean returns instead of 0 and 1
- Reword Kconfig help text

V3 Changes:
- Drop config option, per David Miller
- Drop tail register write checks, per Alexander Duyck
- Change writeq implementation to a static inline, thanks to Joe Perches

V4 Changes:
- Change __IXGBE_REMOVE to __IXGBE_REMOVING, per Scott Feldman's comment
- Add #define writeq writeq, per Alexander Duyck
- Change static inline functions to lower case, per David Miller
- Use new lower case names in added and modified register accesses
- Provide temporary upper case macros for register access functions
- Change IXGBE_REMOVED from macro to static inline and change references
- Correct IXGBE_WRITE_FLUSH to properly enclose parameter expansion
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Additional checks are needed for a detected removal not to cause
problems. Some involve simply avoiding a lot of stuff that can't
do anything good, and also cases where the phony return value can
cause problems. In addition, down the adapter when the removal is
sensed.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prevent writes to an adapter that has been detected as removed
by a previous failing read. This also fixes some include file
ordering confusion that this patch revealed.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check all register reads for adapter removal by checking the status
register after any register read that returns 0xFFFFFFFF. Since the
status register will never return 0xFFFFFFFF unless the adapter is
removed, such a value from a status register read confirms the
removal.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the ethtool register test use the normal register accessor
functions. Also eliminate macros used for calling register test
functions to make error exits clearer. Use boolean values for
boolean returns instead of 0 and 1.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kernel coding standard prefers static inline functions instead
of macros, so use them for register accessors. This is to prepare
for adding LER, Live Error Recovery, checks to those accessors.

Temporarily provide macros for calling the new static inline
accessors until all references are changed.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ixgbe_down function can now prevent multiple executions by
doing test_and_set_bit on __IXGBE_DOWN. This did not work before
introduction of the __IXGBE_REMOVING bit, because of overloading
of __IXGBE_DOWN. Also add smp_mb__before_clear_bit call before
clearing the __IXGBE_DOWN bit.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a bit, __IXGBE_REMOVING, to indicate that the module is being
removed. The __IXGBE_DOWN bit had been overloaded for this purpose,
but that leads to trouble. A few places now check both __IXGBE_DOWN
and __IXGBE_REMOVE. Notably, setting either bit will prevent service
task execution.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aaron Brown says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e that are primarily minor fixes or
general cleanup.

Shannon fixes a bug where the VMDq queue is not associated with the
right setup within the hardware.

Mitch provides a patch adjusting where the VF is reset and another
one adding meaningful context to a message.

Jesse cleans up white space comments and parenthesis.

Catherine bumps the version.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the driver version to 0.3.30-k.
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove some un-necessary parenthesis.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix some whitespace and comment issues.

Change-ID: I1587599e50ce66fd389965720e86f9e331d86643
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make this message mean something, rather than just spitting out a VSI id
without any context whatsoever.

Change-ID: Iafb906c6db46d4b5dcbe84adc9ed44730d08bd42
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a bug where the queue was not associated with the right set-up
within the hardware.  The fix is to use the right QTX_CTL VSI type
when associating it to the VSI.

Change-ID: I65ef6c5a8205601c640a6593e4b7e78d6ba45545
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This write done at the end of VF reset and should not be performed here.

Change-ID: I4d89813b68c6173184293868a6f26cf559bc2405
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_gso_segment() and tcp_gro_receive() no longer need to be
exported. IPv4 and IPv6 offloads are statically linked.

Note that tcp_gro_complete() is still used by bnx2x, unfortunately.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ying Xue says:

====================
use appropriate APIs to get interfaces

Under rtnl_lock protection, we should use __dev_get_name/index()
rather than dev_get_name()/index() to find interface handlers
because the former interfaces can help us avoid to change interface
reference counter.

v2 changes:
 - Change return value of nl80211_set_wiphy() to 0 in patch #10
   by johannes's suggestion.
 - Add 'Acked-by' into several patches which were acknowledged by
   corresponding maintainers.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As __cfg80211_rdev_from_attrs(), nl80211_dump_wiphy_parse() and
nl80211_set_wiphy() are all under rtnl_lock protection,
__dev_get_by_index() instead of dev_get_by_index() should be used
to find interface handler in them allowing us to avoid to change
interface reference counter.

Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As cgw_create_job() is always under rtnl_lock protection,
__dev_get_by_index() instead of dev_get_by_index() should be used to
find interface handler in it having us avoid to change interface
reference counter.

Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following call chains indicate that chnl_net_open() is under
rtnl_lock protection as __dev_open() is protected by rtnl_lock.
So if __dev_get_by_index() instead of dev_get_by_index() is used
to find interface handler in it, this would help us avoid to change
interface reference counter.

__dev_open()
  chnl_net_open()

Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>