sizeof(pointer) != sizeof(array)...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A local debugging change slipped into a previous changeset.

When SCTP_DEBUG is off SCTP_ASSERT should do nothing.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Having two or more qdisc_run's contend against each other is bad because
it can induce packet reordering if the packets have to be requeued.  It
appears that this is an unintended consequence of relinquinshing the queue
lock while transmitting.  That in turn is needed for devices that spend a
lot of time in their transmit routine.

There are no advantages to be had as devices with queues are inherently
single-threaded (the loopback device is not but then it doesn't have a
queue).

Even if you were to add a queue to a parallel virtual device (e.g., bolt
a tbf filter in front of an ipip tunnel device), you would still want to
process the queue in sequence to ensure that the packets are ordered
correctly.

The solution here is to steal a bit from net_device to prevent this.

BTW, as qdisc_restart is no longer used by anyone as a module inside the
kernel (IIRC it used to with netif_wake_queue), I have not exported the
new __qdisc_run function.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Attached patch declares connector init function as subsys_init()
and returns -EAGAIN in case connector is not initialized yet.
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix endless loop in the SCTP match similar to those already fixed in
the SCTP conntrack helper (was CVE-2006-1527).
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (51 commits)
  [MIPS] Make timer interrupt frequency configurable from kconfig.
  [MIPS] Correct HAL2 Kconfig description
  [MIPS] Fix R4K cache macro names
  [MIPS] Add Missing R4K Cache Macros to IP27 & IP32
  [MIPS] Support for the RM9000-based Basler eXcite smart camera platform.
  [MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board
  [MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.
  [MIPS] SN: include asm/sn/types.h for nasid_t.
  [MIPS] Random fixes for sb1250
  [MIPS] Fix bcm1480 compile
  [MIPS] Remove support for NEC DDB5476.
  [MIPS] Remove support for NEC DDB5074.
  [MIPS] Cleanup memory managment initialization.
  [MIPS] SN: Declare bridge_pci_ops.
  [MIPS] Remove unused function alloc_pci_controller.
  [MIPS] IP27: Extract pci_ops into separate file.
  [MIPS] IP27: Use symbolic constants instead of magic numbers.
  [MIPS] vr41xx: remove unnecessay items from vr41xx/Kconfig.
  [MIPS] IP27: Cleanup N/M mode configuration.
  [MIPS] IP27: Throw away old unused hacks.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (46 commits)
  IB/uverbs: Don't serialize with ib_uverbs_idr_mutex
  IB/mthca: Make all device methods truly reentrant
  IB/mthca: Fix memory leak on modify_qp error paths
  IB/uverbs: Factor out common idr code
  IB/uverbs: Don't decrement usecnt on error paths
  IB/uverbs: Release lock on error path
  IB/cm: Use address handle helpers
  IB/sa: Add ib_init_ah_from_path()
  IB: Add ib_init_ah_from_wc()
  IB/ucm: Get rid of duplicate P_Key parameter
  IB/srp: Factor out common request reset code
  IB/srp: Support SRP rev. 10 targets
  [SCSI] srp.h: Add I/O Class values
  IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool.
  IB/mthca: Fill in max_map_per_fmr device attribute
  IB/ipath: Add client reregister event generation
  IB/mthca: Add client reregister event generation
  IB: Move struct port_info from ipath to <rdma/ib_smi.h>
  IPoIB: Handle client reregister events
  IB: Add client reregister event type
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (109 commits)
  [ETHTOOL]: Fix UFO typo
  [SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer.
  [SCTP]: Send only 1 window update SACK per message.
  [SCTP]: Don't do CRC32C checksum over loopback.
  [SCTP] Reset rtt_in_progress for the chunk when processing its sack.
  [SCTP]: Reject sctp packets with broadcast addresses.
  [SCTP]: Limit association max_retrans setting in setsockopt.
  [PFKEYV2]: Fix inconsistent typing in struct sadb_x_kmprivate.
  [IPV6]: Sum real space for RTAs.
  [IRDA]: Use put_unaligned() in irlmp_do_discovery().
  [BRIDGE]: Add support for NETIF_F_HW_CSUM devices
  [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUM
  [TG3]: Convert to non-LLTX
  [TG3]: Remove unnecessary tx_lock
  [TCP]: Add tcp_slow_start_after_idle sysctl.
  [BNX2]: Update version and reldate
  [BNX2]: Use CPU native page size
  [BNX2]: Use compressed firmware
  [BNX2]: Add firmware decompression
  [BNX2]: Allow WoL settings on new 5708 chips
  ...

Manual fixup for conflict in drivers/net/tulip/winbond-840.c

* 'i915fb' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6: (25 commits)
  intelfb: fixup clock calculation debugging.
  Removed hard coded EDID buffer size.
  intelfb: use regular modedb table instead of VESA
  intelfb: use firmware EDID for mode database
  Revert "intelfb driver -- use the regular modedb table instead of the VESA"
  intelfb: int option fix
  sync modesetting code with X.org
  intelfb: align with changes from my X driver.
  intelfb driver -- use the regular modedb table instead of the VESA
  Adds support for 256MB aperture on 945 chipsets to the intelfb driver
  intelfb -- uses stride alignment of 64 on the 9xx chipsets.
  intelfb: some cleanups for intelfbhw
  intelfb: fixup pitch calculation like X does
  intelfb: fixup p calculation
  This patch makes a needlessly global struct static.
  intelfb: add i945GM support
  intelfb: fixup whitespace..
  intelfb: add hw cursor support for i9xx
  intelfb: make i915 modeset
  intelfb: add support for i945G
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] alpha-agp warning fix
  [AGPGART] uninorth-agp warning fixes
  [AGPGART] Remove pointless initialisation in intel-agp
  [AGPGART] Remove pointless code from agp_generic_create_gatt_table()

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] sets nforce2 minimum PLL divider to 2.
  [CPUFREQ] Make powernow-k7 work on SMP kernels.
  [CPUFREQ] cpufreq core {d,}printk adjustments
  [CPUFREQ] dprintk adjustments to cpufreq-speedstep-centrino
  [CPUFREQ] dprintk adjustments to cpufreq-nforce2
  [CPUFREQ] Prepare powernow-k8 for future CPUs.
  [CPUFREQ] Make acpi-cpufreq 'sticky'.
  [CPUFREQ] Remove strange No-op from longrun.c
  [CPUFREQ] Remove more freq_table reinitialisations.
  [CPUFREQ] Fix another redundant initialisation in freq_table
  [CPUFREQ] Remove duplicate assignment in freq_table
  [CPUFREQ] CodingStyle nits in cpufreq_stats.c
  [CPUFREQ] Remove duplicate assignment from cpufreq-nforce2
  [CPUFREQ] Remove pointless reinitialisations in acpi-cpufreq
  [CPUFREQ] Remove pointless reinitialisation from powernow-k8
  [CPUFREQ] Remove redundant initialisation from longhaul.
  [CPUFREQ] Clean up longhaul's speed pretty-printer
  [CPUFREQ] Disambiguate loop indexes in powernow-k7
  [CPUFREQ] Typo in powernow-k8

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (166 commits)
  [PATCH] net: au1000_eth: PHY framework conversion
  [PATCH] 3c5zz ethernet: fix section warnings
  [PATCH] smc ethernet: fix section mismatch warnings
  [PATCH] hp ethernet: fix section mismatches
  [PATCH] Section mismatch in drivers/net/ne.o during modpost
  [PATCH] e1000: prevent statistics from getting garbled during reset
  [PATCH] smc911x Kconfig fix
  [PATCH] forcedeth: new device ids
  [PATCH] forcedeth config: version
  [PATCH] forcedeth config: module parameters
  [PATCH] forcedeth config: diagnostics
  [PATCH] forcedeth config: move functions
  [PATCH] forcedeth config: statistics
  [PATCH] forcedeth config: csum
  [PATCH] forcedeth config: wol
  [PATCH] forcedeth config: phy
  [PATCH] forcedeth config: flow control
  [PATCH] forcedeth config: ring sizes
  [PATCH] forcedeth config: tso cleanup
  [DOC] Update bonding documentation with sysfs info
  ...

Trying to suspend/resume with console messages flying all around is
doomed to failure, when the devices that the messages are trying to
go to are being shut down.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

According to the ACPI spec, it should be enabled on return from suspend,
but bugs happen.  Apparently especially on the Apple Intel Macs.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Doing a full ata_busy_sleep() seems to get suspend and resume working
fine on the Apple Mac Mini, at least.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make HZ configurable.  DECSTATION can select 128/256/1024 HZ, JAZZ can
only select 100 HZ, others can select 100/128/250/256/1000/1024 HZ if
not explicitly specified).  Also remove all mach-xxx/param.h files and
update all defconfigs according to current HZ value.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The current HAL2 Kconfig description indicates it is only used on SGI
Indy systems, however all members of the Indigo2 Family have this sound
card as well.  Plus a minor grammatical fix is included.
Signed-off-by: NJoshua Kinard <kumba@gentoo.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Several machines have the R4K cache macro name spelled incorrectly.  Namely,
they have cpu_has_4kcache defined instead of cpu_has_4k_cache.
Signed-off-by: NJoshua Kinard <kumba@gentoo.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Keeping in accordance with other machines, IP27 and IP32 lack a few
macros.  IP27 lacks cpu_has_4kex & cpu_has_4k_cache macros while IP32
lacks just the cpu_has_4k_cache macro.
Signed-off-by: NJoshua Kinard <kumba@gentoo.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: Ndmitry pervushin  <dpervushin@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Added support for RM200C machines with big endian firmware
Added support for RM200-C40 (R5000 support)
Signed-off-by: NFlorian Lohoff <flo@rfc822.org>
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Random improvements for sb1250: Silence compiler warnings, a bugfix for
the profiling code, and a comment typo.
Signed-off-by: NThiemo Seufer <ths@networkno.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fix compilation for bcm1480, a hpt is only available on sb1250/bcm112x.
Signed-off-by: NThiemo Seufer <ths@networkno.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As warned several times before.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As warned several times before.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Historically plat_mem_setup did the entire platform initialization.  This
was rather impractical because it meant plat_mem_setup had to get away
without any kind of memory allocator.  To keep old code from breaking
plat_setup was just renamed to plat_setup and a second platform
initialization hook for anything else was introduced.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove unnecessary items from vr41xx/Kconfig.  SYS_HA_CPU_VR41XX has
already been selected by MACH_VR41XX.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

kern_addr_valid is currently only being used in kmem_ptr_validate which
is making some vague attempt at verfying the validity of an address.
Only IA-64, PARISC and x86-64 actually make some actual effort to verify
the validity of the pointer.  Most architecture definitions of
kern_addr_valid() just define it as 1; the Alpha and CONFIG_DISCONTIGMEM
on i386 and MIPS even as 0; the 0-definition will result in
kmem_ptr_validate always failing which in turn will cause d_validate to
always fail.  d_validate's only two users are smbfs and ncpfs, so the
0 definition ended breaking those ...
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It's not SN0-specific.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>