This chip needs the speaker pin to go to D3 to avoid clicks,
so default_power_filter does not work here.

This was found on Thinkpad R61i/T61i but I guess it applies to
the entire chip. If not, quirks should be set for at least
PCI SSID 17aa:20ac.

Thanks to c4pp4 for testing.

BugLink: https://bugs.launchpad.net/bugs/886975Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We've got a regression report wrt the IRQ issue related with the
power-save on a Dell machine, and disabling runtime PM works around.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=53441

Cc: <stable@vger.kernel.org> [v3.7+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current badness value used for the missing multi-io seems too
weak, and the multi-io tends to be skipped for desktop configurations
when no enough DACs are available.  It's because the total badness of
the multi-io becomes often larger than the badness with assigning an
individual DAC to a headphone jack.  This is good for one side, but it
seems that the surround outputs are more demanded by that.

This patch increases the badness value for the missing multi-io
slightly so that the multi-io would be preferred than the individual
headphone DAC if they conflict.  Through the tests with hda-emu,
mostly only desktop configurations with ALC662/663 and CMI codecs are
affected by this change, and all look reasonable.
Reported-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit [dcda5806: ALSA: hda - Add workaround for conflicting
IEC958 controls] introduced a workaround for cards that have both
SPDIF and HDMI devices for giving device=1 to SPDIF control elements.
It turned out, however, that this workaround doesn't work well -

- The workaround checks only conflicts in a single codec, but SPDIF
  and HDMI are provided by multiple codecs in many cases, and

- ALSA mixer abstraction doesn't care about the device number in ctl
  elements, thus you'll get errors from amixer such as
  % amixer scontrols -c 0
  ALSA lib simple_none.c:1551:(simple_add1) helem (MIXER,'IEC958
  Playback Switch',0,1,0) appears twice or more
  amixer: Mixer hw:0 load error: Invalid argument

This patch fixes the previous broken workaround.  Instead of changing
the device number of SPDIF ctl elements, shift the element indices of
such controls up to 16.  Also, the conflict check is performed over
all codecs found on the bus.

HDMI devices will be put to dev=0,index=0 as before.  Only the
conflicting SPDIF device is moved to a different place.  The new place
of SPDIF device is supposed by the updated alsa-lib HDA-Intel.conf,
respectively.
Reported-by: NStephan Raue <stephan@openelec.tv>
Reported-by: NAnssi Hannula <anssi.hannula@iki.fi>
Cc: <stable@vger.kernel.org> [v3.8]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The chip address is 32bit long but INVALID_CHIP_ADDRESS is defined as
an unsigned long.  This makes dsp_chip_to_dsp_addx() misbehaving on
64bit architectures.  Fix the INVALID_CHIP_ADDRESS definition to be
32bit.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The problem addressed by this fixup is not specific to Vaio Z, affecting
some Vaio all-in-one desktop PCs too. Update the code comments accordingly.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some Vaio all-in-one desktop PCs (for example VGC-LN51JGB) are affected by
the same issue that caused Vaio Z laptops to become silent: the speaker pin
must be connected to the first DAC even though the codec itself advertises
flexible routing through any of the DACs.

Use the no-primary-hp fixup for choosing the speaker pin as the primary so
that the right DAC is assigned on this device.

Cc: stable@vger.kernel.org
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_ali_pointer function is called with local
interrupts disabled. However it seems very strange to
reenable them in such way.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

According to the other code in this driver and similar
code in rme96 it seems, that spin_lock_irq in
snd_rme32_capture_close function should be paired
with spin_unlock_irq.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The snd_compr_update_tstamp() can only fill in the snd_compr_tstamp
if the codec implements the pointer() function. If that happened
the code was previously returning uninitialized garbage in the
tstamp because it wasn't initialized anywhere.

This change zero-fills the tstamp in the two places it is used
before calling snd_compr_update_tstamp(), and also has
snd_compr_update_tstamp() return an error indication if it
can't provide a tstamp. For the case of snd_compr_calc_avail()
it ignores this error because we still need to return info on
the available buffer space even if we can't provide tstamp
info - when the tstamp is not valid all fields are now
guaranteed to be zero.
Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reduces the resultant binary size.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ASoC: Updates for v3.9

A fairly quiet release for ASoC:

- Support for a wider range of hardware in the compressed stream code.
- The ability to mute capture streams as well as playback streams while
  inactive.
- DT support for AK4642, FSI, Samsung I2S and WM8962.
- AC'97 support for Tegra.
- New driver for max98090, replacing the stub which was there.

Due to dependencies we've also got support for asynchronous I/O in regmap
and DTification of DMA support for Samsung platforms (used only by the
I2S driver and SPI) merged here as well.

Adds quirks and mixer support for the M-Audio Fast Track C600 USB
audio interface. This device is very similar to the C400 - the C600
simply has some more inputs and outputs, so the existing C400 support
is extended to support this device as well.
Signed-off-by: NMatt Gruskin <matthew.gruskin@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>