提交 555df91a 编写于 作者: M Mark Brown

Merge remote-tracking branch 'asoc/topic/wm8962' into asoc-next

WM8962 audio CODEC
This device supports I2C only.
Required properties:
- compatible : "wlf,wm8962"
- reg : the I2C address of the device.
Example:
codec: wm8962@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
};
......@@ -2873,22 +2873,20 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
ret = 0;
if (fll1 & WM8962_FLL_ENA) {
/* This should be a massive overestimate but go even
* higher if we'll error out
*/
if (wm8962->irq)
timeout = msecs_to_jiffies(5);
else
timeout = msecs_to_jiffies(1);
/* This should be a massive overestimate but go even
* higher if we'll error out
*/
if (wm8962->irq)
timeout = msecs_to_jiffies(5);
else
timeout = msecs_to_jiffies(1);
timeout = wait_for_completion_timeout(&wm8962->fll_lock,
timeout);
timeout = wait_for_completion_timeout(&wm8962->fll_lock,
timeout);
if (timeout == 0 && wm8962->irq) {
dev_err(codec->dev, "FLL lock timed out");
ret = -ETIMEDOUT;
}
if (timeout == 0 && wm8962->irq) {
dev_err(codec->dev, "FLL lock timed out");
ret = -ETIMEDOUT;
}
wm8962->fll_fref = Fref;
......@@ -3189,7 +3187,7 @@ static void wm8962_init_beep(struct snd_soc_codec *codec)
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
int ret;
wm8962->beep = input_allocate_device();
wm8962->beep = devm_input_allocate_device(codec->dev);
if (!wm8962->beep) {
dev_err(codec->dev, "Failed to allocate beep device\n");
return;
......@@ -3210,7 +3208,6 @@ static void wm8962_init_beep(struct snd_soc_codec *codec)
ret = input_register_device(wm8962->beep);
if (ret != 0) {
input_free_device(wm8962->beep);
wm8962->beep = NULL;
dev_err(codec->dev, "Failed to register beep device\n");
}
......@@ -3227,7 +3224,6 @@ static void wm8962_free_beep(struct snd_soc_codec *codec)
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
device_remove_file(codec->dev, &dev_attr_beep);
input_unregister_device(wm8962->beep);
cancel_work_sync(&wm8962->beep_work);
wm8962->beep = NULL;
......@@ -3758,10 +3754,17 @@ static const struct i2c_device_id wm8962_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, wm8962_i2c_id);
static const struct of_device_id wm8962_of_match[] = {
{ .compatible = "wlf,wm8962", },
{ }
};
MODULE_DEVICE_TABLE(of, wm8962_of_match);
static struct i2c_driver wm8962_i2c_driver = {
.driver = {
.name = "wm8962",
.owner = THIS_MODULE,
.of_match_table = wm8962_of_match,
.pm = &wm8962_pm,
},
.probe = wm8962_i2c_probe,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册