- 25 3月, 2013 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
They are defined in coreboot (MSR_PLATFORM) and the other one is already defined in msr-index.h. Let's use those. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NDirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 20 3月, 2013 6 次提交
-
-
由 Paul Bolle 提交于
Once instance of this Kconfig macro remained after commit 51acbcec ("md: remove CONFIG_MULTICORE_RAID456"). Remove that one too. And, while we're at it, also remove it from the defconfig files that carry it. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Paul Bolle 提交于
sparc's asm/module.h got removed in commit 786d35d4 ("Make most arch asm/module.h files use asm-generic/module.h"). That removed the only two uses of this Kconfig symbol. So we can remove its entry too. > >From arch/sparc/Makefile: > ifeq ($(CONFIG_SPARC32),y) > [...] > > [...] > export BITS := 32 > [...] > > else > [...] > > [...] > export BITS := 64 > [...] > > So $(BITS) is set depending on whether CONFIG_SPARC32 is set or not. > Using $(BITS) in sparc's Makefiles is not using CONFIG_BITS. That > doesn't count as usage of "config BITS". Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Bolle 提交于
Commit 2d78d4be ("[PATCH] bitops: sparc64: use generic bitops") made the default of GENERIC_HWEIGHT depend on !ULTRA_HAS_POPULATION_COUNT. But since there's no Kconfig symbol with that name, this always evaluates to true. Delete this dependency. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Honig 提交于
There is a potential use after free issue with the handling of MSR_KVM_SYSTEM_TIME. If the guest specifies a GPA in a movable or removable memory such as frame buffers then KVM might continue to write to that address even after it's removed via KVM_SET_USER_MEMORY_REGION. KVM pins the page in memory so it's unlikely to cause an issue, but if the user space component re-purposes the memory previously used for the guest, then the guest will be able to corrupt that memory. Tested: Tested against kvmclock unit test Signed-off-by: NAndrew Honig <ahonig@google.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Andy Honig 提交于
If the guest sets the GPA of the time_page so that the request to update the time straddles a page then KVM will write onto an incorrect page. The write is done byusing kmap atomic to get a pointer to the page for the time structure and then performing a memcpy to that page starting at an offset that the guest controls. Well behaved guests always provide a 32-byte aligned address, however a malicious guest could use this to corrupt host kernel memory. Tested: Tested against kvmclock unit test. Signed-off-by: NAndrew Honig <ahonig@google.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Paul Bolle 提交于
The Kconfig entry for DEBUG_ERRORS is a verbatim copy of the former arm entry for that symbol. It got removed in v2.6.39 because it wasn't actually used anywhere. There are still no users of DEBUG_ERRORS so remove this entry too. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> [catalin.marinas@arm.com: removed option from defconfig] Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 19 3月, 2013 3 次提交
-
-
由 Paul Bolle 提交于
Config option GENERIC_HARDIRQS_NO_DEPRECATED was removed in commit 78c89825 ("genirq: Remove the now obsolete config options and select statements"), but the select was accidentally reintroduced in commit 8c2c3df3 ("arm64: Build infrastructure"). Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Ben Collins 提交于
Somehow the driver snuck in with these still in it. Signed-off-by: NBen Collins <ben.c@servergy.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marcelo Tosatti 提交于
There is a deadlock in pvclock handling: cpu0: cpu1: kvm_gen_update_masterclock() kvm_guest_time_update() spin_lock(pvclock_gtod_sync_lock) local_irq_save(flags) spin_lock(pvclock_gtod_sync_lock) kvm_make_mclock_inprogress_request(kvm) make_all_cpus_request() smp_call_function_many() Now if smp_call_function_many() called by cpu0 tries to call function on cpu1 there will be a deadlock. Fix by moving pvclock_gtod_sync_lock protected section outside irq disabled section. Analyzed by Gleb Natapov <gleb@redhat.com> Acked-by: NGleb Natapov <gleb@redhat.com> Reported-and-Tested-by: NYongjie Ren <yongjie.ren@intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 18 3月, 2013 7 次提交
-
-
由 Arnd Bergmann 提交于
887cbce0 "arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS" and 4febd95a "Select VIRT_TO_BUS directly where needed" from Stephen Rothwell changed globally how CONFIG_VIRT_TO_BUS is selected, while my own a5d533ee "ARM: disable virt_to_bus/ virt_to_bus almost everywhere" was merged at the same time and changed which platforms select it on ARM. The result of this conflict was that we again see CONFIG_VIRT_TO_BUS on all ARM systems. This patch fixes up the problem and removes CONFIG_ARCH_NO_VIRT_TO_BUS again on ARM. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
-
由 Andreas Schwab 提交于
The expression to compute the padding needed to fill the uc_sigmask field to 1024 bits actually computes the padding needed for 1080 bits. Fortunately, due to the 16-byte alignment of the following field (uc_mcontext) the definition in glibc contains enough bytes of padding after uc_sigmask so that the overall offsets and size match in both definitions. Signed-off-by: NAndreas Schwab <schwab@suse.de> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
The __atomic_hash is only defined when SMP is enabled but the arm64ksyms.c exports it even for the UP case. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
Recent clean-up of the compat signal code left an unused 'stack' variable. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Stephane Eranian 提交于
Add scheduling constraints for SNB/SNB-EP CYCLE_ACTIVITY event as defined by SDM Jan 2013 edition. The STALLS umasks are combinations with the NO_DISPATCH umask. Signed-off-by: NStephane Eranian <eranian@gmail.com> Cc: peterz@infradead.org Cc: ak@linux.intel.com Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/20130317134957.GA8550@quadSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Masami Hiramatsu 提交于
Currently kprobes check whether the copied instruction modifies IF (interrupt flag) on each probe hit. This results not only in introducing overhead but also involving inat_get_opcode_attribute into the kprobes hot path, and it can cause an infinite recursive call (and kernel panic in the end). Actually, since the copied instruction itself can never be modified on the buffer, it is needless to analyze the instruction on every probe hit. To fix this issue, we check it only once when registering probe and store the result on ainsn->if_modifier. Reported-by: NTimo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Cc: yrl.pp-manager.tt@hitachi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20130314115242.19690.33573.stgit@mhiramat-M0-7522Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Linus Torvalds 提交于
Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") fixed a crash when doing PEBS performance profiling after resuming, but in using init_debug_store_on_cpu() to restore the DS_AREA mtrr it also resulted in a new WARN_ON() triggering. init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU cross-calls to do the MSR update. Which is not really valid at the early resume stage, and the warning is quite reasonable. Now, it all happens to _work_, for the simple reason that smp_call_function_single() ends up just doing the call directly on the CPU when the CPU number matches, but we really should just do the wrmsr() directly instead. This duplicates the wrmsr() logic, but hopefully we can just remove the wrmsr_on_cpu() version eventually. Reported-and-tested-by: NParag Warudkar <parag.lkml@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 3月, 2013 5 次提交
-
-
由 Aneesh Kumar K.V 提交于
Now we use ESID_BITS of kernel address to build proto vsid. So rename USER_ESIT_BITS to ESID_BITS Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.8]
-
由 Aneesh Kumar K.V 提交于
This patch change the kernel VSID range so that we limit VSID_BITS to 37. This enables us to support 64TB with 65 bit VA (37+28). Without this patch we have boot hangs on platforms that only support 65 bit VA. With this patch we now have proto vsid generated as below: We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated from mmu context id and effective segment id of the address. For user processes max context id is limited to ((1ul << 19) - 5) for kernel space, we use the top 4 context ids to map address as below 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ] 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ] 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ] 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ] Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Tested-by: NGeoff Levand <geoff@infradead.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.8]
-
由 Aneesh Kumar K.V 提交于
VSID_BITS and VSID_BITS_1T depends on the context bits and user esid bits. Make the dependency explicit Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.8]
-
由 Stephen Rothwell 提交于
Our kernel is not much good without BINFMT_ELF and this fixes a build warning on 64 bit allnoconfig builds: warning: (COMPAT) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF) Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
With some CONFIGS it's possible that in ppc_set_hwdebug, brk.len is uninitialised before being used. It has been reported that GCC 4.2 will produce the following error in this case: arch/powerpc/kernel/ptrace.c:1479: warning: 'brk.len' is used uninitialized in this function arch/powerpc/kernel/ptrace.c:1381: note: 'brk.len' was declared here This patch corrects this. Signed-off-by: NMichael Neuling <mikey@neuling.org> Reported-by: NPhilippe De Muyter <phdm@macqel.be> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 16 3月, 2013 2 次提交
-
-
由 Santosh Shilimkar 提交于
With recent arm broadcast time clean-up from Mark Rutland, the dummy broadcast device is always registered with timer subsystem. And since the rating of the dummy clock event is very high, it may be preferred over a real clock event. This is a change in behavior from past and not an intended one. So reduce the rating of the dummy clock-event so that real clock-event device is selected when available. Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Stephane Eranian 提交于
This patch fixes a kernel crash when using precise sampling (PEBS) after a suspend/resume. Turns out the CPU notifier code is not invoked on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly by the kernel and keeps it power-on/resume value of 0 causing any PEBS measurement to crash when running on CPU0. The workaround is to add a hook in the actual resume code to restore the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0, the DS_AREA will be restored twice but this is harmless. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 3月, 2013 4 次提交
-
-
由 Sascha Hauer 提交于
The i.MX35 has two bits per clock gate which are decoded as follows: 0b00 -> clock off 0b01 -> clock is on in run mode, off in wait/doze 0b10 -> clock is on in run/wait mode, off in doze 0b11 -> clock is always on The reset value for the MAX clock is 0b10. The MAX clock is needed by the SoC, yet unused in the Kernel, so the common clock framework will disable it during late init time. It will only disable clocks though which it detects as being turned on. This detection is made depending on the lower bit of the gate. If the reset value has been altered by the bootloader to 0b11 the clock framework will detect the clock as turned on, yet unused, hence it will turn it off and the system locks up. This patch turns the MAX clock on unconditionally making the Kernel independent of the bootloader. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Stephen Boyd 提交于
Scorpion processors have always been v7 CPUs. Fix the Kconfig text to reflect this. Reported-by: NStepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Haojian Zhuang 提交于
arch/arm/mach-mmp/gplugd.c: In function ‘gplugd_init’: arch/arm/mach-mmp/gplugd.c:188:2: error: implicit declaration of function ‘platform_device_register’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1 make: *** [arch/arm/mach-mmp] Error 2 So append platform_device.h to resolve build issue. Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>
-
由 Arnd Bergmann 提交于
56bc911a "[media] s5p-fimc: Redefine platform data structure for fimc-is" changed the bus_type member of struct fimc_source_info treewide, but got one instance wrong in mach-s5pv210, which was evidently not even build tested. This adds the missing change to get s5pv210_defconfig to build again. Applies on the Mauro's media tree. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 14 3月, 2013 6 次提交
-
-
由 Sascha Hauer 提交于
The i.MX25 DT machine descriptor calls a non existing imx25_timer_init() function. This patch adds it to fix compilation. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Ludovic Desroches 提交于
Fix an infinite loop when suspending or resuming a device with AIC5. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Ludovic Desroches 提交于
gpio suspend/resume and wakeup sources where not managed when using pinctrl so it was impossible to wake up the system with a gpio. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Marek Szyprowski 提交于
Atomic pool should always be allocated from DMA zone if such zone is available in the system to avoid issues caused by limited dma mask of any of the devices used for making an atomic allocation. Reported-by: NKrzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Cc: Stable <stable@vger.kernel.org> [v3.6+]
-
由 David Howells 提交于
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be compared against __BYTE_ORDER in preprocessor conditionals where these are exposed to userspace (that is they're not inside __KERNEL__ conditionals). However, in the main kernel the norm is to check for "defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and this has incorrectly leaked into the userspace headers. The definition of struct stat64 in M32R's asm/stat.h is wrong in this way. Note that userspace will likely interpret the field order incorrectly as the big-endian variant on little-endian machines - depending on header inclusion order. [!!!] NOTE [!!!] This patch may adversely change the userspace API. It might be better to fix the ordering of st_blocks and __pad4 in struct stat64. Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sukadev Bhattiprolu 提交于
Create a sysfs entry, '/sys/bus/event_source/devices/cpu/format/event' which describes the format of the POWER7 PMU events. This code is based on corresponding code in x86. Changelog[v4]: [Michael Ellerman, Paul Mckerras] The event format is different for other POWER cpus. So move the code to POWER7-specific, power7-pmu.c Also, the POWER7 format uses bits 0-19 not 0-20. Changelog[v2]: [Jiri Osla] Use PMU_FORMAT_ATTR rather than duplicating code. Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: NPaul Mackerras <paulus@samba.org> Tested-by: NMichael Ellerman <michael@ellerman.id.au> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anton Blanchard <anton@au1.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: benh@kernel.crashing.org Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/20130306054826.GA14627@us.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 13 3月, 2013 6 次提交
-
-
由 Richard Genoud 提交于
There was only chip enable and readdy/busy pins for the nand controller. This add the rest of the pins. pinctrl_nand_16bits contains the specific muxes for 16 bits NANDs. Signed-off-by: NRichard Genoud <richard.genoud@gmail.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Richard Genoud 提交于
Comments on NAND pins where inverted. Signed-off-by: NRichard Genoud <richard.genoud@gmail.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Jonas Bonn 提交于
The OpenRISC arch doesn't actually have the virt_to_bus methods Signed-off-by: NJonas Bonn <jonas@southpole.se>
-
由 Jonas Bonn 提交于
The recent move to GPIO descriptors breaks the OpenRISC build. Requiring gpiolib resolves this; using gpiolib exclusively is also the recommended way forward for all arches by the developers working on these GPIO changes. The non-gpiolib implementation for OpenRISC never worked anyway... Signed-off-by: NJonas Bonn <jonas@southpole.se>
-
由 Johan Hovold 提交于
Fix regression introduced by commit d2323cf7 ("onewire: w1-gpio: add ext_pullup_enable pin in platform data") which added a gpio entry to the platform data, but did not add the required initialisers to the board files using it. Consequently, the driver would request gpio 0 at probe, which could break other uses of the corresponding pin. On AT91 requesting gpio 0 changes the pin muxing for PIOA0, which, for instance, breaks SPI0 on at91sam9g20. Cc: stable <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Anton Blanchard 提交于
Commit 5ac47f7a (powerpc: Relocate prom_init.c on 64bit) made prom_init.c position independent by manually relocating its entries in the TOC. We get the address of the TOC entries with the __prom_init_toc_start linker symbol. If __prom_init_toc_start ends up as an entry in the TOC then we need to add an offset to get the current address. This is the case for older toolchains. On the other hand, if we have a newer toolchain that supports -mcmodel=medium then __prom_init_toc_start will be created by a relative offset from r2 (the TOC pointer). Since r2 has already been relocated, nothing more needs to be done. Adding an offset in this case is wrong and Aaro Koskinen and Alexander Graf have noticed noticed G5 and OpenBIOS breakage. Alan Modra suggested we just use r2 to get at the TOC which is simpler and works with both old and new toolchains. Reported-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAnton Blanchard <anton@samba.org> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-