提交 4febd95a 编写于 作者: S Stephen Rothwell 提交者: Linus Torvalds

Select VIRT_TO_BUS directly where needed

In commit 887cbce0 ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS")
I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where
needed.  I am not sure what I was thinking.  Instead, just directly
select VIRT_TO_BUS where it is needed.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 8aec0f5d
......@@ -319,13 +319,6 @@ config ARCH_WANT_OLD_COMPAT_IPC
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
bool
config HAVE_VIRT_TO_BUS
bool
help
An architecture should select this if it implements the
deprecated interface virt_to_bus(). All new architectures
should probably not select this.
config HAVE_ARCH_SECCOMP_FILTER
bool
help
......
......@@ -9,7 +9,7 @@ config ALPHA
select HAVE_PERF_EVENTS
select HAVE_DMA_ATTRS
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW
......
......@@ -49,7 +49,7 @@ config ARM
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select KTIME_SCALAR
select PERF_USE_VMALLOC
select RTC_LIB
......
......@@ -7,7 +7,7 @@ config AVR32
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_ATOMIC64
select HARDIRQS_SW_RESEND
......
......@@ -33,7 +33,7 @@ config BLACKFIN
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
......
......@@ -43,7 +43,7 @@ config CRIS
select GENERIC_ATOMIC64
select HAVE_GENERIC_HARDIRQS
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_IOMAP
......
......@@ -6,7 +6,7 @@ config FRV
select HAVE_PERF_EVENTS
select HAVE_UID16
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select HAVE_DEBUG_BUGVERBOSE
select ARCH_HAVE_NMI_SAFE_CMPXCHG
......
......@@ -5,7 +5,7 @@ config H8300
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
......
......@@ -26,7 +26,7 @@ config IA64
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_VIRT_CPU_ACCOUNTING
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_DISCARD_MEMBLOCK
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
......
......@@ -10,7 +10,7 @@ config M32R
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_DEBUG_BUGVERBOSE
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_ATOMIC64
......
......@@ -8,7 +8,7 @@ config M68K
select GENERIC_IRQ_SHOW
select GENERIC_ATOMIC64
select HAVE_UID16
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
select GENERIC_CPU_DEVICES
select GENERIC_STRNCPY_FROM_USER if MMU
......
......@@ -19,7 +19,7 @@ config MICROBLAZE
select HAVE_DEBUG_KMEMLEAK
select IRQ_DOMAIN
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
......
......@@ -38,7 +38,7 @@ config MIPS
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select MODULES_USE_ELF_REL if MODULES
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select CLONE_BACKWARDS
......
......@@ -8,7 +8,7 @@ config MN10300
select HAVE_ARCH_KGDB
select GENERIC_ATOMIC64
select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
select OLD_SIGSUSPEND3
......
......@@ -12,7 +12,7 @@ config OPENRISC
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_ARCH_TRACEHOOK
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
......
......@@ -21,7 +21,7 @@ config PARISC
select GENERIC_STRNCPY_FROM_USER
select SYSCTL_ARCH_UNALIGN_ALLOW
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select MODULES_USE_ELF_RELA
select CLONE_BACKWARDS
select TTY # Needed for pdc_cons.c
......
......@@ -98,7 +98,7 @@ config PPC
select HAVE_FUNCTION_GRAPH_TRACER
select SYSCTL_EXCEPTION_TRACE
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_VIRT_TO_BUS if !PPC64
select VIRT_TO_BUS if !PPC64
select HAVE_IDE
select HAVE_IOREMAP_PROT
select HAVE_EFFICIENT_UNALIGNED_ACCESS
......
......@@ -134,7 +134,7 @@ config S390
select HAVE_SYSCALL_WRAPPERS
select HAVE_UID16 if 32BIT
select HAVE_VIRT_CPU_ACCOUNTING
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select INIT_ALL_POSSIBLE
select KTIME_SCALAR if 32BIT
select MODULES_USE_ELF_RELA
......
......@@ -12,7 +12,7 @@ config SCORE
select GENERIC_CPU_DEVICES
select GENERIC_CLOCKEVENTS
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select MODULES_USE_ELF_REL
select CLONE_BACKWARDS
......
......@@ -17,7 +17,7 @@ config TILE
select GENERIC_IRQ_SHOW
select HAVE_DEBUG_BUGVERBOSE
select HAVE_SYSCALL_WRAPPERS if TILEGX
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select SYS_HYPERVISOR
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_CLOCKEVENTS
......
......@@ -9,7 +9,7 @@ config UNICORE32
select GENERIC_ATOMIC64
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select ARCH_HAVE_CUSTOM_GPIO_H
select GENERIC_FIND_FIRST_BIT
select GENERIC_IRQ_PROBE
......
......@@ -112,7 +112,7 @@ config X86
select GENERIC_STRNLEN_USER
select HAVE_CONTEXT_TRACKING if X86_64
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select MODULES_USE_ELF_REL if X86_32
select MODULES_USE_ELF_RELA if X86_64
select CLONE_BACKWARDS if X86_32
......
......@@ -9,7 +9,7 @@ config XTENSA
select HAVE_IDE
select GENERIC_ATOMIC64
select HAVE_GENERIC_HARDIRQS
select HAVE_VIRT_TO_BUS
select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
......
......@@ -286,8 +286,12 @@ config NR_QUICK
default "1"
config VIRT_TO_BUS
def_bool y
depends on HAVE_VIRT_TO_BUS
bool
help
An architecture should select this if it implements the
deprecated interface virt_to_bus(). All new architectures
should probably not select this.
config MMU_NOTIFIER
bool
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册