- 10 3月, 2011 13 次提交
-
-
由 Philipp Reisner 提交于
The condition must be checked after perpare_to_wait(). The old implementaion could loose wakeup events. Never observed in real life. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
We only issue resync requests if there is no significant application IO going on. = Application IO has higher priority than resnyc IO. If application IO can not be started because the resync process locked an resync_lru entry, start the IO operations necessary to release the lock ASAP. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
In this connection mode, the ahead node no longer replicates application IO. The behind's disk becomes out dated. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
To ease tracking of bios in some hash tables, we want it to not cross certain boundaries (128k, used to be 32k). We limit the maximum bio size using queue parameters. Historically some defines and variables we use there have been named max_segment_size, which was misguided. Rename them to max_bio_size, and use [blk_]queue_max_hw_sectors where appropriate. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Preparation patch to be able to use the auto-throttling resync controller for online-verify requests as well. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Jens Axboe 提交于
With the plugging now being explicitly controlled by the submitter, callers need not pass down unplugging hints to the block layer. If they want to unplug, it's because they manually plugged on their own - in which case, they should just unplug at will. Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Jens Axboe 提交于
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 13 11月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
Over time, block layer has accumulated a set of APIs dealing with bdev open, close, claim and release. * blkdev_get/put() are the primary open and close functions. * bd_claim/release() deal with exclusive open. * open/close_bdev_exclusive() are combination of open and claim and the other way around, respectively. * bd_link/unlink_disk_holder() to create and remove holder/slave symlinks. * open_by_devnum() wraps bdget() + blkdev_get(). The interface is a bit confusing and the decoupling of open and claim makes it impossible to properly guarantee exclusive access as in-kernel open + claim sequence can disturb the existing exclusive open even before the block layer knows the current open if for another exclusive access. Reorganize the interface such that, * blkdev_get() is extended to include exclusive access management. @holder argument is added and, if is @FMODE_EXCL specified, it will gain exclusive access atomically w.r.t. other exclusive accesses. * blkdev_put() is similarly extended. It now takes @mode argument and if @FMODE_EXCL is set, it releases an exclusive access. Also, when the last exclusive claim is released, the holder/slave symlinks are removed automatically. * bd_claim/release() and close_bdev_exclusive() are no longer necessary and either made static or removed. * bd_link_disk_holder() remains the same but bd_unlink_disk_holder() is no longer necessary and removed. * open_bdev_exclusive() becomes a simple wrapper around lookup_bdev() and blkdev_get(). It also has an unexpected extra bdev_read_only() test which probably should be moved into blkdev_get(). * open_by_devnum() is modified to take @holder argument and pass it to blkdev_get(). Most of bdev open/close operations are unified into blkdev_get/put() and most exclusive accesses are tested atomically at the open time (as it should). This cleans up code and removes some, both valid and invalid, but unnecessary all the same, corner cases. open_bdev_exclusive() and open_by_devnum() can use further cleanup - rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop special features. Well, let's leave them for another day. Most conversions are straight-forward. drbd conversion is a bit more involved as there was some reordering, but the logic should stay the same. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NNeil Brown <neilb@suse.de> Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: NMike Snitzer <snitzer@redhat.com> Acked-by: NPhilipp Reisner <philipp.reisner@linbit.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Alex Elder <aelder@sgi.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: dm-devel@redhat.com Cc: drbd-dev@lists.linbit.com Cc: Leo Chen <leochen@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Joern Engel <joern@logfs.org> Cc: reiserfs-devel@vger.kernel.org Cc: Alexander Viro <viro@zeniv.linux.org.uk>
-
- 10 11月, 2010 1 次提交
-
-
由 Mike Snitzer 提交于
Convert direct reads of an inode's i_size to using i_size_read(). i_size_{read,write} use a seqcount to protect reads from accessing incomple writes. Concurrent i_size_write()s require mutual exclussion to protect the seqcount that is used by i_size_{read,write}. But i_size_read() callers do not need to use additional locking. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Acked-by: NNeilBrown <neilb@suse.de> Acked-by: NLars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 23 10月, 2010 3 次提交
-
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
- 22 10月, 2010 2 次提交
-
-
由 Lars Ellenberg 提交于
If we have contention in drbd_al_begin_iod (heavy randon IO), an administrative request to detach the disk may deadlock for similar reasons as the recently fixed deadlock if detaching because of IO-error. The approach taken here is to either go through the intermediate cleanup state D_FAILED, or first lock out application io, don't just go directly to D_DISKLESS. We need an additional state bit (WAS_IO_ERROR) to distinguish the -> D_FAILED because of IO-error from other failures. Sanitize D_ATTACHING -> D_FAILED to D_ATTACHING -> D_DISKLESS. If only attaching, ldev may be missing still, but would be referenced from within the after_state_ch for -> D_FAILED, potentially dereferencing a NULL pointer. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
If those messages ever get logged, clearly state that they are actually failed ASSERTS, so our regression tests can pick them up from the logs more easily. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
- 15 10月, 2010 19 次提交
-
-
由 Lars Ellenberg 提交于
Scenario: Something (say, flush-147:0) is in drbd_al_begin_io, holding a local_cnt, waiting for the resync to make progress. Disk fails, worker in after_state_ch does drbd_rs_cancel_all, then waits for local_cnt to drop to zero. flush-147:0 is woken by drbd_rs_cancel_all, needs to write an AL transaction, and queues that on the worker. Deadlock. Fix: do not wait in the worker, have put_ldev() trigger the state change D_FAILED -> D_DISKLESS when necessary. put_ldev() cannot do the state change directly, as it may or may not already hold various spinlocks. We queue a short work instead. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
drbd commit 17c854fea474a5eb3cfa12e4fb019e46debbc4ec drbd: receiving of big packets, for payloads between 64kByte and 4GByte introduced a new on-the-wire packet header format. We must no longer assume either format, but use the result of whatever drbd_recv_header has decoded. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Connections through a compressing proxy might have more bits on the fly. 500MByte instead of 50MByte Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
There are three ways to get IO suspended: * Loss of any access to data * Fence-peer-handler running * User requested to suspend IO Track those in different bits, so that one condition clearing its state bit does not interfere with the other two conditions. Only when the user resumes IO he overrules all three bits. The fact is hidden from the user, he sees only a single suspend bit. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
addendum to baa33ae4eaa4477b60af7c434c0ddd1d182c1ae7 The race: drbd_md_sync() if (!test_and_clear_bit(MD_DIRTY, &mdev->flags)) return; ==> RACE with drbd_md_mark_dirty() rearming the timer. del_timer(&mdev->md_sync_timer); Fixed by moving the del_timer before the test_and_clear_bit. Additionally only rearm the timer in drbd_md_mark_dirty, if MD_DIRTY was not already set, reduce the grace period from five to one second, and add an ifdef'ed debuging aid to find code paths missing an explicit drbd_md_sync, if any, as those are the only relevant ones for this race. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
The actual race happened int the drbd_start_resync() function. Where drbd_resync_finished() -> __drbd_set_state() set STOP_SYNC_TIMER and armed the timer. If the timer fired before execution reaches the mod_timer statement at the end of drbd_start_resync() the latter would cause an unexpected call to w_make_resync_request(). Removed the STOP_SYNC_TIMER bit, and base it on the connection state. The STOP_SYNC_TIMER bit probably originates probably the time before the state engine. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
When the complete device is marked as out of sync, we can disable updates of the on disk AL. Currently AL updates are only disabled if one uses the "invalidate-remote" command on an unconnected, primary device, or when at attach time all bits in the bitmap are set. As of now, AL updated do not get disabled when a all bits becomes set due to application writes to an unconnected DRBD device. While this is a missing feature, it is not considered important, and might get added later. BTW, after initializing a "one legged" DRBD device drbdadm create-md resX drbdadm -- --force primary resX AL updates also get disabled, until the first connect. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Now we have multiple BIOs per ee, packets with a 32 bit length field, it gets time to use these goodies. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
We now track the data rate of locally submitted resync related requests, and can thus detect non-resync activity on the lower level device. If the current sync rate is above c-min-rate, and the lower level device appears to be busy, we throttle the resyncer. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
The current resync speed as displayed in /proc/drbd fluctuates a lot. Using an array of rolling marks makes this calculation much more stable. We used to have this (a long time ago with 0.7), but it got lost somehow. If "stalled", do not discard the rest of the information, just add a " (stalled)" tag to the progress line. This patch also shortens a spinlock critical section somewhat, and reduces the number of atomic operations in put_ldev. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
- 14 10月, 2010 1 次提交
-
-
由 Philipp Reisner 提交于
We may not free tl_hash when IO is suspended, since we can not wait until ap_bio_cnt reaches zero. We can do this after susp reched 0, since then tl_clear was called Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-