- 02 5月, 2019 14 次提交
-
-
由 Dan Carpenter 提交于
[ Upstream commit 7159a986b4202343f6cca3bb8079ecace5816fd6 ] We can't pass error pointers to brelse(). Fixes: fb265c9cb49e ("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Antoine Tenart 提交于
[ Upstream commit 8b318f30ab4ef9bbc1241e6f8c1db366dbd347f2 ] The Phylink validate function is the Marvell PPv2 driver makes a check on the GoP id. This is valid an has to be done when using PPv2.2 engines but makes no sense when using PPv2.1. The check done when using an RGMII interface makes sure the GoP id is not 0, but this breaks PPv2.1. Fixes it. Fixes: 0fb628f0f250 ("net: mvpp2: fix phylink handling of invalid PHY modes") Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Thomas Falcon 提交于
[ Upstream commit 986103e7920cabc0b910749e77ae5589d3934d52 ] Commit a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") made the change to hold the RTNL lock during driver reset but still calls netdev_notify_peers, which results in a deadlock. Instead, use call_netdevice_notifiers, which is functionally the same except that it does not take the RTNL lock again. Fixes: a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Pablo Neira Ayuso 提交于
[ Upstream commit 8ffcd32f64633926163cdd07a7d295c500a947d1 ] Proper use counter updates when activating and deactivating the object, otherwise, this hits bogus EBUSY error. Fixes: cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase") Reported-by: NLaura Garcia <nevola@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Pablo Neira Ayuso 提交于
[ Upstream commit 273fe3f1006ea5ebc63d6729e43e8e45e32b256a ] Set deletion after flush coming in the same batch results in EBUSY. Add set use counter to track the number of references to this set from rules. We cannot rely on the list of bindings for this since such list is still populated from the preparation phase. Reported-by: NVáclav Zindulka <vaclav.zindulka@tlapnet.cz> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Pablo Neira Ayuso 提交于
[ Upstream commit 40ba1d9b4d19796afc9b7ece872f5f3e8f5e2c13 ] The abort path can cause a double-free of an anonymous set. Added-and-to-be-aborted rule looks like this: udp dport { 137, 138 } drop The to-be-aborted transaction list looks like this: newset newsetelem newsetelem rule This gets walked in reverse order, so first pass disables the rule, the set elements, then the set. After synchronize_rcu(), we then destroy those in same order: rule, set element, set element, newset. Problem is that the anonymous set has already been bound to the rule, so the rule (lookup expression destructor) already frees the set, when then cause use-after-free when trying to delete the elements from this set, then try to free the set again when handling the newset expression. Rule releases the bound set in first place from the abort path, this causes the use-after-free on set element removal when undoing the new element transactions. To handle this, skip new element transaction if set is bound from the abort path. This is still causes the use-after-free on set element removal. To handle this, remove transaction from the list when the set is already bound. Joint work with Florian Westphal. Fixes: f6ac85858976 ("netfilter: nf_tables: unbind set in rule from commit path") Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1325Acked-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Pablo Neira Ayuso 提交于
[ Upstream commit b8e204006340b7aaf32bd2b9806c692f6e0cb38a ] Add .release_ops, that is called in case of error at a later stage in the expression initialization path, ie. .select_ops() has been already set up operations and that needs to be undone. This allows us to unwind .select_ops from the error path, ie. release the dynamic operations for this extension. Moreover, allocate one single operation instead of recycling them, this comes at the cost of consuming a bit more memory per rule, but it simplifies the infrastructure. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Florian Westphal 提交于
[ Upstream commit 947e492c0fc2132ae5fca081a9c2952ccaab0404 ] When I moved the refcount to refcount_t type I missed the fact that refcount_inc() will result in use-after-free warning with CONFIG_REFCOUNT_FULL=y builds. The correct fix would be to init the reference count to 1 at allocation time, but, unfortunately we cannot do this, as we can't undo that in case something else fails later in the batch. So only solution I see is to special-case the 'new entry' condition and replace refcount_inc() with a "delayed" refcount_set(1) in this case, as done here. The .activate callback can be removed to simplify things, we only need to make sure that deactivate() decrements/unlinks the entry from the list at end of transaction phase (commit or abort). Fixes: 12c44aba6618 ("netfilter: nft_compat: use refcnt_t type for nft_xt reference count") Reported-by: NJordan Glover <Golden_Miller83@protonmail.ch> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Pablo Neira Ayuso 提交于
Anonymous sets that are bound to rules from the same transaction trigger a kernel splat from the abort path due to double set list removal and double free. This patch updates the logic to search for the transaction that is responsible for creating the set and disable the set list removal and release, given the rule is now responsible for this. Lookup is reverse since the transaction that adds the set is likely to be at the tail of the list. Moreover, this patch adds the unbind step to deliver the event from the commit path. This should not be done from the worker thread, since we have no guarantees of in-order delivery to the listener. This patch removes the assumption that both activate and deactivate callbacks need to be provided. Fixes: cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase") Reported-by: NMikhail Morfikov <mmorfikov@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
->destroy is only allowed to free data, or do other cleanups that do not have side effects on other state, such as visibility to other netlink requests. Such things need to be done in ->deactivate. As a transaction can fail, we need to make sure we can undo such operations, therefore ->activate() has to be provided too. So print a warning and refuse registration if expr->ops provides only one of the two operations. v2: fix nft_expr_check_ops to not repeat same check twice (Jones Desougi) Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
The nft_compat destroy function deletes the nft_xt object from a list. This isn't allowed anymore. Destroy functions are called asynchronously, i.e. next batch can find the object that has a pending ->destroy() invocation: cpu0 cpu1 worker ->destroy for_each_entry() if (x == ... return x->ops; list_del(x) kfree_rcu(x) expr->ops->... // ops was free'd To resolve this, the list_del needs to occur before the transaction mutex gets released. nf_tables has a 'deactivate' hook for this purpose, so use that to unlink the object from the list. Fixes: 0935d5588400 ("netfilter: nf_tables: asynchronous release") Reported-by: NTaehee Yoo <ap420073@gmail.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
[ Upstream commit cd5125d8f51882279f50506bb9c7e5e89dc9bef3 ] Splits unbind_set into destroy_set and unbinding operation. Unbinding removes set from lists (so new transaction would not find it anymore) but keeps memory allocated (so packet path continues to work). Rebind function is added to allow unrolling in case transaction that wants to remove set is aborted. Destroy function is added to free the memory, but this could occur outside of transaction in the future. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Florian Westphal 提交于
[ Upstream commit cf52572ebbd7189a1966c2b5fc34b97078cd1dce ] There are two problems with nft_compat since the netlink config plane uses a per-netns mutex: 1. Concurrent add/del accesses to the same list 2. accesses to a list element after it has been free'd already. This patch fixes the first problem. Freeing occurs from a work queue, after transaction mutexes have been released, i.e., it still possible for a new transaction (even from same net ns) to find the to-be-deleted expression in the list. The ->destroy functions are not allowed to have any such side effects, i.e. the list_del() in the destroy function is not allowed. This part of the problem is solved in the next patch. I tried to make this work by serializing list access via mutex and by moving list_del() to a deactivate callback, but Taehee spotted following race on this approach: NET #0 NET #1 >select_ops() ->init() ->select_ops() ->deactivate() ->destroy() nft_xt_put() kfree_rcu(xt, rcu_head); ->init() <-- use-after-free occurred. Unfortunately, we can't increment reference count in select_ops(), because we can't undo the refcount increase in case a different expression fails in the same batch. (The destroy hook will only be called in case the expression was initialized successfully). Fixes: f102d66b ("netfilter: nf_tables: use dedicated mutex to guard transactions") Reported-by: NTaehee Yoo <ap420073@gmail.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Florian Westphal 提交于
[ Upstream commit 12c44aba6618b7f6c437076e5722237190f6cd5f ] Using standard integer type was fine while all operations on it were guarded by the nftnl subsys mutex. This isn't true anymore: 1. transactions are guarded only by a pernet mutex, so concurrent rule manipulation in different netns is racy 2. the ->destroy hook runs from a work queue after the transaction mutex has been released already. cpu0 cpu1 (net 1) cpu2 (net 2) kworker nft_compat->destroy nft_compat->init nft_compat->init if (--nft_xt->ref == 0) nft_xt->ref++ nft_xt->ref++ Switch to refcount_t. Doing this however only fixes a minor aspect, nft_compat also performs linked-list operations in an unsafe way. This is addressed in the next two patches. Fixes: f102d66b ("netfilter: nf_tables: use dedicated mutex to guard transactions") Fixes: 0935d5588400 ("netfilter: nf_tables: asynchronous release") Reported-by: NTaehee Yoo <ap420073@gmail.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
- 27 4月, 2019 26 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Will Deacon 提交于
commit 9002b21465fa4d829edfc94a5a441005cffaa972 upstream. Commit 32a5ad9c2285 ("sysctl: handle overflow for file-max") hooked up min/max values for the file-max sysctl parameter via the .extra1 and .extra2 fields in the corresponding struct ctl_table entry. Unfortunately, the minimum value points at the global 'zero' variable, which is an int. This results in a KASAN splat when accessed as a long by proc_doulongvec_minmax on 64-bit architectures: | BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0 | Read of size 8 at addr ffff2000133d1c20 by task systemd/1 | | CPU: 0 PID: 1 Comm: systemd Not tainted 5.1.0-rc3-00012-g40b114779944 #2 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x228 | show_stack+0x14/0x20 | dump_stack+0xe8/0x124 | print_address_description+0x60/0x258 | kasan_report+0x140/0x1a0 | __asan_report_load8_noabort+0x18/0x20 | __do_proc_doulongvec_minmax+0x5d8/0x6a0 | proc_doulongvec_minmax+0x4c/0x78 | proc_sys_call_handler.isra.19+0x144/0x1d8 | proc_sys_write+0x34/0x58 | __vfs_write+0x54/0xe8 | vfs_write+0x124/0x3c0 | ksys_write+0xbc/0x168 | __arm64_sys_write+0x68/0x98 | el0_svc_common+0x100/0x258 | el0_svc_handler+0x48/0xc0 | el0_svc+0x8/0xc | | The buggy address belongs to the variable: | zero+0x0/0x40 | | Memory state around the buggy address: | ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa | ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa | >ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 | ^ | ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00 | ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fix the splat by introducing a unsigned long 'zero_ul' and using that instead. Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com Fixes: 32a5ad9c2285 ("sysctl: handle overflow for file-max") Signed-off-by: NWill Deacon <will.deacon@arm.com> Acked-by: NChristian Brauner <christian@brauner.io> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matteo Croce <mcroce@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This reverts commit 0e0f7b30 which was commit 71492580571467fb7177aade19c18ce7486267f5 upstream. Tetsuo rightly points out that the backport here is incorrect, as it touches the __lock_set_class function instead of the intended __lock_downgrade function. Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Waiman Long <longman@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Torvalds 提交于
commit b59dfdaef173677b0b7e10f375226c0a1114fd20 upstream. Commit 9ee3e06610fd ("HID: i2c-hid: override HID descriptors for certain devices") added a new dmi_system_id quirk table to override certain HID report descriptors for some systems that lack them. But the table wasn't properly terminated, causing the dmi matching to walk off into la-la-land, and starting to treat random data as dmi descriptor pointers, causing boot-time oopses if you were at all unlucky. Terminate the array. We really should have some way to just statically check that arrays that should be terminated by an empty entry actually are so. But the HID people really should have caught this themselves, rather than have me deal with an oops during the merge window. Tssk, tssk. Cc: Julian Sax <jsbc@gmx.de> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Ambrož Bizjak <abizjak.pro@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Katsuhiro Suzuki 提交于
commit 24d6638302b48328a58c13439276d4531af4ca7d upstream. This patch adds SNDRV_PCM_INFO_INTERLEAVED into PCM hardware info. Signed-off-by: NKatsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: NMark Brown <broonie@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Arnaldo Carvalho de Melo 提交于
commit ba4aa02b417f08a0bee5e7b8ed70cac788a7c854 upstream. So that we reduce the difference of tools/include/linux/bitops.h to the original kernel file, include/linux/bitops.h, trying to remove the need to define BITS_PER_LONG, to avoid clashes with asm/bitsperlong.h. And the things removed from tools/include/linux/bitops.h are really in linux/bits.h, so that we can have a copy and then tools/perf/check_headers.sh will tell us when new stuff gets added to linux/bits.h so that we can check if it is useful and if any adjustment needs to be done to the tools/{include,arch}/ copies. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y1sqyydvfzo0bjjoj4zsl562@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Matteo Croce 提交于
commit 00206a69ee32f03e6f40837684dcbe475ea02266 upstream. Since commit ad67b74d ("printk: hash addresses printed with %p"), at boot "____ptrval____" is printed instead of actual addresses: percpu: Embedded 38 pages/cpu @(____ptrval____) s124376 r0 d31272 u524288 Instead of changing the print to "%px", and leaking kernel addresses, just remove the print completely, cfr. e.g. commit 071929db ("arm64: Stop printing the virtual memory layout"). Signed-off-by: NMatteo Croce <mcroce@redhat.com> Signed-off-by: NDennis Zhou <dennis@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Takashi Iwai 提交于
commit 8c2f870890fd28e023b0fcf49dcee333f2c8bad7 upstream. The ALSA proc helper manages the child nodes in a linked list, but its addition and deletion is done without any lock. This leads to a corruption if they are operated concurrently. Usually this isn't a problem because the proc entries are added sequentially in the driver probe procedure itself. But the card registrations are done often asynchronously, and the crash could be actually reproduced with syzkaller. This patch papers over it by protecting the link addition and deletion with the parent's mutex. There is "access" mutex that is used for the file access, and this can be reused for this purpose as well. Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Konstantin Khlebnikov 提交于
commit e8277b3b52240ec1caad8e6df278863e4bf42eac upstream. Commit 58bc4c34 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly") depends on skipping vmstat entries with empty name introduced in 7aaf7727 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat") but reverted in b29940c1abd7 ("mm: rename and change semantics of nr_indirectly_reclaimable_bytes"). So skipping no longer works and /proc/vmstat has misformatted lines " 0". This patch simply shows debug counters "nr_tlb_remote_*" for UP. Link: http://lkml.kernel.org/r/155481488468.467.4295519102880913454.stgit@buzz Fixes: 58bc4c34 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly") Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Roman Gushchin <guro@fb.com> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jann Horn 提交于
commit 0fcc4c8c044e117ac126ab6df4138ea9a67fa2a9 upstream. When dev_exception_add() returns an error (due to a failed memory allocation), make sure that we move the RCU preemption count back to where it was before we were called. We dropped the RCU read lock inside the loop body, so we can't just "break". sparse complains about this, too: $ make -s C=2 security/device_cgroup.o ./include/linux/rcupdate.h:647:9: warning: context imbalance in 'propagate_exception' - unexpected unlock Fixes: d591fb56 ("device_cgroup: simplify cgroup tree walk in propagate_exception()") Cc: stable@vger.kernel.org Signed-off-by: NJann Horn <jannh@google.com> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Phil Auld 提交于
[ Upstream commit 2e8e19226398db8265a8e675fcc0118b9e80c9e8 ] With extremely short cfs_period_us setting on a parent task group with a large number of children the for loop in sched_cfs_period_timer() can run until the watchdog fires. There is no guarantee that the call to hrtimer_forward_now() will ever return 0. The large number of children can make do_sched_cfs_period_timer() take longer than the period. NMI watchdog: Watchdog detected hard LOCKUP on cpu 24 RIP: 0010:tg_nop+0x0/0x10 <IRQ> walk_tg_tree_from+0x29/0xb0 unthrottle_cfs_rq+0xe0/0x1a0 distribute_cfs_runtime+0xd3/0xf0 sched_cfs_period_timer+0xcb/0x160 ? sched_cfs_slack_timer+0xd0/0xd0 __hrtimer_run_queues+0xfb/0x270 hrtimer_interrupt+0x122/0x270 smp_apic_timer_interrupt+0x6a/0x140 apic_timer_interrupt+0xf/0x20 </IRQ> To prevent this we add protection to the loop that detects when the loop has run too many times and scales the period and quota up, proportionally, so that the timer can complete before then next period expires. This preserves the relative runtime quota while preventing the hard lockup. A warning is issued reporting this state and the new values. Signed-off-by: NPhil Auld <pauld@redhat.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Anton Blanchard <anton@ozlabs.org> Cc: Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190319130005.25492-1-pauld@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Matthias Kaehlcke 提交于
commit a75bb4eb9e565b9f5115e2e8c07377ce32cbe69a upstream. The clang option -Oz enables *aggressive* optimization for size, which doesn't necessarily result in smaller images, but can have negative impact on performance. Switch back to the less aggressive -Os. This reverts commit 6748cb3c. Suggested-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NMatthias Kaehlcke <mka@chromium.org> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Yue Haibing 提交于
commit b9d0a85d6b2e76630cfd4c475ee3af4109bfd87a upstream calc_tpm2_event_size() has an invalid signature because it returns a 'size_t' where as its signature says that it returns 'int'. Cc: <stable@vger.kernel.org> Fixes: 4d23cc32 ("tpm: add securityfs support for TPM 2.0 firmware event log") Suggested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NYue Haibing <yuehaibing@huawei.com> Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJames Morris <james.morris@microsoft.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Jarkko Sakkinen 提交于
[ Upstream commit 442601e87a4769a8daba4976ec3afa5222ca211d ] Return -E2BIG when the transfer is incomplete. The upper layer does not retry, so not doing that is incorrect behaviour. Cc: stable@vger.kernel.org Fixes: a2871c62 ("tpm: Add support for Atmel I2C TPMs") Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: NStefan Berger <stefanb@linux.ibm.com> Reviewed-by: NJerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Masahiro Yamada 提交于
[ Upstream commit f880eea68fe593342fa6e09be9bb661f3c297aec ] Use specific prototype instead of an opaque pointer so that the compiler can catch function prototype mismatch. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NMathieu Malaterre <malat@debian.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Masahiro Yamada 提交于
[ Upstream commit ec91e78d378cc5d4b43805a1227d8e04e5dfa17d ] Commit e49ce141 ("modpost: use linker section to generate table.") was not so cool as we had expected first; it ended up with ugly section hacks when commit dd2a3aca ("mod/file2alias: make modpost compile on darwin again") came in. Given a certain degree of unknowledge about the link stage of host programs, I really want to see simple, stupid table lookup so that this works in the same way regardless of the underlying executable format. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NMathieu Malaterre <malat@debian.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Adrian Hunter 提交于
[ Upstream commit af849c86109d79222e549826068bbf4e7f9a2472 ] If the host controller supports auto-commands then enable the auto-command error interrupt and handle it. In the case of auto-CMD23, the error is treated the same as manual CMD23 error. In the case of auto-CMD12, commands-during-transfer are not permitted, so the error handling is treated the same as a data error. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Adrian Hunter 提交于
[ Upstream commit 869f8a69bb3a4aec4eb914a330d4ba53a9eed495 ] The SDHCI_ACMD12_ERR register is used for auto-CMD23 and auto-CMD12 errors, as is the SDHCI_INT_ACMD12ERR interrupt bit. Rename them to SDHCI_AUTO_CMD_STATUS and SDHCI_INT_AUTO_CMD_ERR respectively. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Adrian Hunter 提交于
[ Upstream commit 4bf780996669280171c9cd58196512849b93434e ] Existing data command CRC error handling is non-standard and does not work with some Intel host controllers. Specifically, the assumption that the host controller will continue operating normally after the error interrupt, is not valid. Change the driver to handle the error in the same manner as a data CRC error, taking care to ensure that the data line reset is done for single or multi-block transfers, and it is done before unmapping DMA. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Dan Williams 提交于
commit 78153dd45e7e0596ba32b15d02bda08e1513111e upstream. Gate ARS result consumption on whether the OS issued start-ARS since the previous consumption. The BIOS may only clear its result buffers after a successful start-ARS. Fixes: 0caeef63 ("libnvdimm: Add a poison list and export badblocks") Cc: <stable@vger.kernel.org> Reported-by: NKrzysztof Rusocki <krzysztof.rusocki@intel.com> Reported-by: NVishal Verma <vishal.l.verma@intel.com> Reviewed-by: NToshi Kani <toshi.kani@hpe.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Dan Williams 提交于
commit 5479b2757f26fe9908fc341d105b2097fe820b6f upstream. The ARS implementation implements exponential back-off on the poll interval to prevent high-frequency access to the DIMM / platform interface. Depending on when the ARS completes the poll interval may exceed the completion event by minutes. Allow root to reset the timeout each time it probes the status. A one-second timeout is still enforced, but root can otherwise can control the poll interval. Fixes: bc6ba808 ("nfit, address-range-scrub: rework and simplify ARS...") Cc: <stable@vger.kernel.org> Reported-by: NErwin Tsaur <erwin.tsaur@oracle.com> Reviewed-by: NToshi Kani <toshi.kani@hpe.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Dan Williams 提交于
commit e34b8252a3d2893ca55c82dbfcdaa302fa03d400 upstream. In preparation for introducing new flags to gate whether ARS results are stale, or poll the completion state, convert the existing flags to an unsigned long with enumerated values. This conversion allows the flags to be atomically updated outside of ->init_mutex. Reviewed-by: NToshi Kani <toshi.kani@hpe.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Dan Williams 提交于
commit 317a992ab9266b86b774b9f6b0f87eb4f59879a1 upstream. The ars_start_flags property of 'struct acpi_nfit_desc' is no longer used since ARS_REQ_SHORT and ARS_REQ_LONG were added. Reviewed-by: NToshi Kani <toshi.kani@hpe.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Chang-An Chen 提交于
commit 3f2552f7e9c5abef2775c53f7af66532f8bf65bc upstream. tick_freeze() introduced by suspend-to-idle in commit 124cf911 ("PM / sleep: Make it possible to quiesce timers during suspend-to-idle") uses timekeeping_suspend() instead of syscore_suspend() during suspend-to-idle. As a consequence generic sched_clock will keep going because sched_clock_suspend() and sched_clock_resume() are not invoked during suspend-to-idle which can result in a generic sched_clock wrap. On a ARM system with suspend-to-idle enabled, sched_clock is registered as "56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns", which means the real wrapping duration is 8796093022202ns. [ 134.551779] suspend-to-idle suspend (timekeeping_suspend()) [ 1204.912239] suspend-to-idle resume (timekeeping_resume()) ...... [ 1206.912239] suspend-to-idle suspend (timekeeping_suspend()) [ 5880.502807] suspend-to-idle resume (timekeeping_resume()) ...... [ 6000.403724] suspend-to-idle suspend (timekeeping_suspend()) [ 8035.753167] suspend-to-idle resume (timekeeping_resume()) ...... [ 8795.786684] (2)[321:charger_thread]...... [ 8795.788387] (2)[321:charger_thread]...... [ 0.057226] (0)[0:swapper/0]...... [ 0.061447] (2)[0:swapper/2]...... sched_clock was not stopped during suspend-to-idle, and sched_clock_poll hrtimer was not expired because timekeeping_suspend() was invoked during suspend-to-idle. It makes sched_clock wrap at kernel time 8796s. To prevent this, invoke sched_clock_suspend() and sched_clock_resume() in tick_freeze() together with timekeeping_suspend() and timekeeping_resume(). Fixes: 124cf911 (PM / sleep: Make it possible to quiesce timers during suspend-to-idle) Signed-off-by: NChang-An Chen <chang-an.chen@mediatek.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kees Cook <keescook@chromium.org> Cc: Corey Minyard <cminyard@mvista.com> Cc: <linux-mediatek@lists.infradead.org> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: <kuohong.wang@mediatek.com> Cc: <freddy.hsin@mediatek.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1553828349-8914-1-git-send-email-chang-an.chen@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Thomas Gleixner 提交于
commit 2f5fb19341883bb6e37da351bc3700489d8506a7 upstream. Mikhail reported a lockdep splat related to the AMD specific ssb_state lock: CPU0 CPU1 lock(&st->lock); local_irq_disable(); lock(&(&sighand->siglock)->rlock); lock(&st->lock); <Interrupt> lock(&(&sighand->siglock)->rlock); *** DEADLOCK *** The connection between sighand->siglock and st->lock comes through seccomp, which takes st->lock while holding sighand->siglock. Make sure interrupts are disabled when __speculation_ctrl_update() is invoked via prctl() -> speculation_ctrl_update(). Add a lockdep assert to catch future offenders. Fixes: 1f50ddb4 ("x86/speculation: Handle HT correctly on AMD") Reported-by: NMikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: NMikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Thomas Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1904141948200.4917@nanos.tec.linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kan Liang 提交于
commit 9d5dcc93a6ddfc78124f006ccd3637ce070ef2fc upstream. PEBS_REGS used as mask for the supported registers for large PEBS. However, the mask cannot filter the sample_regs_user/sample_regs_intr correctly. (1ULL << PERF_REG_X86_*) should be used to replace PERF_REG_X86_*, which is only the index. Rename PEBS_REGS to PEBS_GP_REGS, because the mask is only for general purpose registers. Signed-off-by: NKan Liang <kan.liang@linux.intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: jolsa@kernel.org Fixes: 2fe1bc1f ("perf/x86: Enable free running PEBS for REGS_USER/INTR") Link: https://lkml.kernel.org/r/20190402194509.2832-2-kan.liang@linux.intel.com [ Renamed it to PEBS_GP_REGS - as 'GPRS' is used elsewhere ;-) ] Signed-off-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-