- 16 7月, 2017 1 次提交
-
-
由 Marcus Wolf 提交于
Added a driver for the pi433 radio module (see https://www.pi433.de/en.html for details). Signed-off-by: NMarcus Wolf <linux@Wolf-Entwicklungen.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 28 4月, 2017 3 次提交
-
-
由 Ioana Radulescu 提交于
Add the command build/parse APIs for operating on DPNI objects through the DPAA2 Management Complex. Signed-off-by: NIoana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Gilad Ben-Yossef 提交于
Introduce basic low level Arm TrustZone CryptoCell HW support. This first patch doesn't actually register any Crypto API transformations, these will follow up in the next patch. This first revision supports the CC 712 REE component. Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Guenter Roeck 提交于
This driver implements the USB Type-C Power Delivery state machine for both source and sink ports. Alternate mode support is not fully implemented. The driver attaches to the USB Type-C class code implemented in the following patches. usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY usb: USB Type-C connector class This driver only implements the state machine. Lower level drivers are responsible for - Reporting VBUS status and activating VBUS - Setting CC lines and providing CC line status - Setting line polarity - Activating and deactivating VCONN - Setting the current limit - Activating and deactivating PD message transfers - Sending and receiving PD messages The driver provides both a functional API as well as callbacks for lower level drivers. Signed-off-by: NGuenter Roeck <groeck@chromium.org> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 4月, 2017 1 次提交
-
-
由 Hans de Goede 提交于
The rtl8723bs is found on quite a few systems used by Linux users, such as on Atom systems (Intel Computestick and various other Atom based devices) and on many (budget) ARM boards such as the CHIP. The plan moving forward with this is for the new clean, written from scratch, rtl8xxxu driver to eventually gain support for sdio devices. But there is no clear timeline for that, so lets add this driver included in staging for now. Cc: Bastien Nocera <hadess@hadess.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Jes Sorensen <jes.sorensen@gmail.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 06 3月, 2017 1 次提交
-
-
由 Michael Zoran 提交于
The bcm2835-audio driver is part of v04_services, so it makes sense for it to be located under vc04_services to make configuration clearer. Signed-off-by: NMichael Zoran <mzoran@crowfest.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 27 1月, 2017 1 次提交
-
-
由 Michael Zoran 提交于
Initial cleanup of bcm2835-audio driver for the bcm2535(Raspberry PI) Driver provides HDMI audio through ALSA and is built on top of the vc04_services driver. Original version of the driver is available at: http://www.github.com/raspberry/linux Driver compiles without any build errors or warnings. Tested on a RPI 3 running in ARM64 mode with the vlc player and alsautils. Signed-off-by: NMichael Zoran <mzoran@crowfest.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 06 1月, 2017 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
It's now 2017, and a new LTS kernel has been chosen, so let's do what we said we would do in the TODO file and delete this code. If it's still needed, and a maintainer steps up to take it over, we will easily revert it. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 12月, 2016 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
A "real" driver for this hardware has now landed in the networking tree, so remove this old staging driver so that we don't have multiple drivers for the same hardware, and so people don't waste their time trying to clean up this old code. Cc: Lior Dotan <liodot@gmail.com> Cc: Christopher Harrer <charrer@alacritech.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 02 10月, 2016 1 次提交
-
-
由 popcornmix 提交于
Signed-off-by: Npopcornmix <popcornmix@gmail.com> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: NDaniel Stone <daniels@collabora.com> vchiq: fix the shim message release Signed-off-by: NDaniel Stone <daniels@collabora.com> vchiq: export additional symbols Signed-off-by: NDaniel Stone <daniels@collabora.com> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: NPranith Kumar <bobby.prani@gmail.com> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: NColin Ian King <colin.king@canonical.com> vchiq_arm: Sort out the vmalloc case See: https://github.com/raspberrypi/linux/issues/1055 vchiq: hack: Add include depecated dma include file [gregkh] added dependancy on CONFIG_BROKEN to make things sane for now. Cc: Eric Anholt <eric@anholt.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 19 9月, 2016 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This adds a proper Kconfig file for drivers/staging/greybus and fixes up the Makefile to work correctly within the kernel build system (modules depend on the .config options, etc.) Signed-off-by: NGreg Kroah-Hartman <gregkh@google.com>
-
- 10 9月, 2016 1 次提交
-
-
由 Jes Sorensen 提交于
This driver is superseded by rtl8xxxu and has been marked as scheduled for deletion since 4.6 Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 6月, 2016 1 次提交
-
-
由 Wolfram Sang 提交于
See the TODO for details where this driver came from. Only a few minor changes were made to make the driver suitable for staging: * updated Kconfig help text and dependencies * added TODO * removed two __DATE__ and __TIME__ printouts to allow reproducible builds * added to staging main Kconfig + Makefile Tested on a Renesas Salvator-X board with a Spectec SDW-823 card. I could connect to a WPA-protected network. Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 27 5月, 2016 1 次提交
-
-
由 Doug Ledford 提交于
This is no longer in use. Remove it. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 05 4月, 2016 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This reverts commit 82ef33af. It turns out these machines are still out there, and the original patch broke them. So revert it, adding back the driver, so people's machines still work properly. Reported-by: NJames Cameron <quozl@laptop.org> Cc: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 3月, 2016 1 次提交
-
-
由 Linus Walleij 提交于
As of commit 62d5bdf9 "Merge branch 'synaptics-rmi4' into next" the input subsystem has a proper RMI4 infrastructure and touchscreen driver. The ST Ux500 platform has been converted to use the new driver and its devicetree bindings. Delete this ancient hack. Cc: Andrew Duggan <aduggan@synaptics.com> Cc: Christopher Heiny <cheiny@synaptics.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 3月, 2016 1 次提交
-
-
由 Shraddha Barke 提交于
Remove support for gdm72xx driver from the kernel since Wimax is dead. [1] http://www.networkworld.com/article/2220370/4g/wimax-is-dead.html [2] http://www.androidcentral.com/sprint-confirms-wimax-shutdown-november-6-2015 Chrome OS can distribute this driver alongside their library. Signed-off-by: NShraddha Barke <shraddha.6596@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 06 3月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
The icn, act2000 and pcbit drivers are all for very old hardware, and it is highly unlikely that anyone is actually still using them on modern kernels, if at all. All three drivers apparently are for hardware that predates PCI being the common connector, as they are ISA-only and active PCI ISDN cards were widely available in the 1990s. Looking through the git logs, it I cannot find any indication of a patch to any of these drivers that has been tested on real hardware, only cleanups or global API changes. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NKarsten Keil <isdn@linux-pingi.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 2月, 2016 1 次提交
-
-
由 Ksenija Stanojevic 提交于
Move panel driver from drivers/staging/panel to drivers/misc. Signed-off-by: NKsenija Stanojevic <ksenija.stanojevic@gmail.com> Acked-by: NWilly Tarreau <w@1wt.eu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 29 1月, 2016 2 次提交
-
-
由 Shraddha Barke 提交于
Remove support for dgap driver since there is no way to get the firmware files required by the dgap driver into the linux- firmware tree. The dgap driver is rendered useless without this firmware and hence this product is considered obsolete by DIGI. Signed-off-by: NShraddha Barke <shraddha.6596@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Shraddha Barke 提交于
Remove support for One Laptop Per Child organization since it is dead. http://www.olpcnews.com/about_olpc_news/goodbye_one_laptop_per_child.htmlSigned-off-by: NShraddha Barke <shraddha.6596@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 10月, 2015 1 次提交
-
-
由 Deepa Dinamani 提交于
Remove support for Qleadtek Flash-OFDM modems. Telecom carrier is discontinuing service for the radio technology. See http://www.gtigroup.org/news/ind/2015-08-18/6996.html. Suggested-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 29 8月, 2015 1 次提交
-
-
由 Doug Ledford 提交于
Create the rdma directory in the staging area for use as we deprecate some older drivers and as we bring in some new drivers that are in need of work. Update the MAINTAINERS file so that updates to these files go to linux-rdma@vger.kernel.org. Expected lifespan of this directory is three releases for any deprecated drivers moved here and an unknown, but theoretically bounded amount of time for the new drivers as a new core RDMA transfer library needs to be written and the drivers modified to use it in order for them to move out of this directory. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 11 8月, 2015 1 次提交
-
-
由 Jason A. Donenfeld 提交于
Ozwpan is completely unmaintained and potentially a security problem. As this is a staging driver, it should be removed, since it has been abandoned. Cc: Shigekatsu Tateno <shigekatsu.tateno@atmel.com> Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 8月, 2015 1 次提交
-
-
由 Sudip Mukherjee 提交于
Now since all cleanups are done and the code is ready to be merged lets move it out of staging into fbdev location. Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 7月, 2015 1 次提交
-
-
由 Christian Gromm 提交于
This patch adds the core module of the MOST driver to the kernel's driver staging area. This module is part of the MOST driver and handles the configuration interface in sysfs, the buffer management and the data routing. MOST defines the protocol, hardware and software layers necessary to allow for the efficient and low-cost transport of control, real-time and packet data using a single medium (physical layer). Media currently in use are fiber optics, unshielded twisted pair cables (UTP) and coax cables. MOST also supports various speed grades up to 150 Mbps. For more information on MOST, visit the MOST Cooperation website: www.mostcooperation.com. Cars continue to evolve into sophisticated consumer electronics platforms, increasing the demand for reliable and simple solutions to support audio, video and data communications. MOST can be used to connect multiple consumer devices via optical or electrical physical layers directly to one another or in a network configuration. As a synchronous network, MOST provides excellent Quality of Service and seamless connectivity for audio/video streaming. Therefore, the driver perfectly fits to the mission of Automotive Grade Linux to create open source software solutions for automotive applications. The driver consists basically of three layers. The hardware layer, the core layer and the application layer. The core layer consists of the core module only. This module handles the communication flow through all three layers, the configuration of the driver, the configuration interface representation in sysfs, and the buffer management. For each of the other two layers a selection of modules is provided. These modules can arbitrarily be combined to meet the needs of the desired system architecture. A module of the hardware layer is referred to as an HDM (hardware dependent module). Each module of this layer handles exactly one of the peripheral interfaces of a network interface controller (e.g. USB, MediaLB, I2C). A module of the application layer is referred to as an AIM (application interfacing module). The modules of this layer give access to MOST via one the following ways: character devices, ALSA, Networking or V4L2. To physically access MOST, an Intelligent Network Interface Controller (INIC) is needed. For more information on available controllers visit: www.microchip.com Signed-off-by: NChristian Gromm <christian.gromm@microchip.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 5月, 2015 1 次提交
-
-
由 Johnny Kim 提交于
This driver is for the wilc1000 which is a single chip IEEE 802.11 b/g/n device. The driver works together with cfg80211, which is the kernel side of configuration management for wireless devices because the wilc1000 chipset is fullmac where the MLME is managed in hardware. The driver worked from kernel version 2.6.38 and being now ported to several others since then. A TODO file is included as well in this commit. Signed-off-by: NJohnny Kim <johnny.kim@atmel.com> Signed-off-by: NRachel Kim <rachel.kim@atmel.com> Signed-off-by: NDean Lee <dean.lee@atmel.com> Signed-off-by: NChris Park <chris.park@atmel.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 5月, 2015 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This subsystem isn't used anymore, and the hardware isn't around. It's been in staging for a while, and it's time for it to now be removed. Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 3月, 2015 2 次提交
-
-
由 J. German Rivera 提交于
Platform device driver that sets up the basic bus infrastructure for the fsl-mc bus type, including support for adding/removing fsl-mc devices, register/unregister of fsl-mc drivers, and bus match support to bind devices to drivers. Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com> Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Sudip Mukherjee 提交于
sm750 of Silicon Motion is pci-e display controller device and has features like dual display and 2D acceleration. This patch adds the driver to staging. Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 2月, 2015 2 次提交
-
-
由 Alan Cox 提交于
We have a drivers/input layer for Synaptics products and nothing should now be using the staging driver. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Cox 提交于
The I2O layer deals with a technology that to say the least didn't catch on in the market. The only relevant products are some of the AMI MegaRAID - which supported I2O and its native mode (The native mode is faster and runs on Linux), an obscure crypto ethernet card that's now so many years out of date nobody would use it, the old DPT controllers, which speak their own dialect and have their own driver - and ermm.. thats about it. We also know the code isn't in good shape as recently a patch was proposed and queried as buggy, which in turn showed the existing code was broken already by prior "clean up" and nobody had noticed that either. It's coding style robot code nothing more. Like some forgotten corridor cleaned relentlessly by a lost Roomba but where no user has trodden in years. Move it to staging and then to /dev/null. The headers remain as they are shared with dpt_i2o. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 1月, 2015 1 次提交
-
-
由 Sudip Mukherjee 提交于
This reverts commit "dc93c852" Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 18 1月, 2015 1 次提交
-
-
由 Thomas Petazzoni 提交于
This commit adds the core fbtft framework from https://github.com/notro/fbtft. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NNoralf Tronnes <notro@tronnes.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 13 1月, 2015 1 次提交
-
-
由 Takashi Iwai 提交于
Promote line6 driver from staging to sound/usb/line6 directory, and maintain through sound subsystem tree. This commit just moves the code and adapts Makefile / Kconfig. The further renames and misc cleanups will follow. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 11月, 2014 1 次提交
-
-
由 Philipp Zabel 提交于
The imx-drm driver was put into staging mostly for the following reasons, all of which have been addressed or superseded: - convert the irq driver to use linear irq domains - work out the device tree bindings, this lead to the common of_graph bindings being used - factor out common helper functions, this mostly resulted in the component framework and drm of_graph helpers. Before adding new fixes, and certainly before adding new features, move it into its proper place below drivers/gpu/drm. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 20 10月, 2014 2 次提交
-
-
由 Jeff Kirsher 提交于
The Beceem WiMAX driver was barely function in its current state and was non-functional on 64 bit systems. Based on repeated statements from Greg KH that he wanted the driver removed, I am removing the driver. CC: Matthias Beyer <mail@beyermatthias.de> CC: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Soren Brinkmann 提交于
Add a driver for the Xilinx Clocking Wizard soft IP. The clocking wizard provides an AXI interface to dynamically reconfigure the clocking resources of Xilinx FPGAs. Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 10月, 2014 2 次提交
-
-
由 Mark Einon 提交于
The current version of the et131x driver has been accepted into the main tree at /drivers/net/ethernet, so it can now be removed from staging. The MAINTAINERS entry has not been touched here, as the patch to add the driver to drivers/net modifies it correctly. Signed-off-by: NMark Einon <mark.einon@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mark Einon 提交于
This adds the ethernet driver for Agere et131x devices to drivers/net/ethernet. The driver being added has been in the staging tree for some time, and will be removed from there in a seperate patch. This one merely disables the staging version to prevent two instances being built. Signed-off-by: NMark Einon <mark.einon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-