staging: fbtft: core support

This commit adds the core fbtft framework from
https://github.com/notro/fbtft.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NNoralf Tronnes <notro@tronnes.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/Kconfig

@@ -106,4 +106,6 @@ source "drivers/staging/unisys/Kconfig"
 
 source "drivers/staging/clocking-wizard/Kconfig"
 
+source "drivers/staging/fbtft/Kconfig"
+
 endif # STAGING

drivers/staging/Makefile

@@ -45,3 +45,4 @@ obj-$(CONFIG_GS_FPGABOOT)	+= gs_fpgaboot/
 obj-$(CONFIG_CRYPTO_SKEIN)	+= skein/
 obj-$(CONFIG_UNISYSSPAR)	+= unisys/
 obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD)	+= clocking-wizard/
+obj-$(CONFIG_FB_TFT)		+= fbtft/

drivers/staging/fbtft/Kconfig

+menuconfig FB_TFT
+	tristate "Support for small TFT LCD display modules"
+	depends on FB && SPI && GPIOLIB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	select FB_BACKLIGHT

drivers/staging/fbtft/Makefile

+# Core module
+obj-$(CONFIG_FB_TFT)             += fbtft.o
+fbtft-y                          += fbtft-core.o fbtft-sysfs.o fbtft-bus.o fbtft-io.o

drivers/staging/fbtft/README

+  FBTFT
+=========
+
+Linux Framebuffer drivers for small TFT LCD display modules.
+The module 'fbtft' makes writing drivers for some of these displays very easy.
+
+Development is done on a Raspberry Pi running the Raspbian "wheezy" distribution.
+
+INSTALLATION
+  Download kernel sources
+
+  From Linux 3.15  
+    cd drivers/video/fbdev/fbtft
+    git clone https://github.com/notro/fbtft.git
+    
+    Add to drivers/video/fbdev/Kconfig:   source "drivers/video/fbdev/fbtft/Kconfig"
+    Add to drivers/video/fbdev/Makefile:  obj-y += fbtft/
+  
+  Before Linux 3.15  
+    cd drivers/video
+    git clone https://github.com/notro/fbtft.git
+    
+    Add to drivers/video/Kconfig:   source "drivers/video/fbtft/Kconfig"
+    Add to drivers/video/Makefile:  obj-y += fbtft/
+  
+  Enable driver(s) in menuconfig and build the kernel
+
+
+See wiki for more information: https://github.com/notro/fbtft/wiki
+
+
+Source: https://github.com/notro/fbtft/

drivers/staging/fbtft/fbtft-bus.c

+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include "fbtft.h"
+
+
+
+
+/*****************************************************************************
+ *
+ *   void (*write_reg)(struct fbtft_par *par, int len, ...);
+ *
+ *****************************************************************************/
+
+#define define_fbtft_write_reg(func, type, modifier)                          \
+void func(struct fbtft_par *par, int len, ...)                                \
+{                                                                             \
+	va_list args;                                                         \
+	int i, ret;                                                           \
+	int offset = 0;                                                       \
+	type *buf = (type *)par->buf;                                         \
+									      \
+	if (unlikely(par->debug & DEBUG_WRITE_REGISTER)) {                    \
+		va_start(args, len);                                          \
+		for (i = 0; i < len; i++) {                                   \
+			buf[i] = (type)va_arg(args, unsigned int);            \
+		}                                                             \
+		va_end(args);                                                 \
+		fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par, par->info->device, type, buf, len, "%s: ", __func__);   \
+	}                                                                     \
+									      \
+	va_start(args, len);                                                  \
+									      \
+	if (par->startbyte) {                                                 \
+		*(u8 *)par->buf = par->startbyte;                             \
+		buf = (type *)(par->buf + 1);                                 \
+		offset = 1;                                                   \
+	}                                                                     \
+									      \
+	*buf = modifier((type)va_arg(args, unsigned int));                    \
+	if (par->gpio.dc != -1)                                               \
+		gpio_set_value(par->gpio.dc, 0);                              \
+	ret = par->fbtftops.write(par, par->buf, sizeof(type)+offset);        \
+	if (ret < 0) {                                                        \
+		va_end(args);                                                 \
+		dev_err(par->info->device, "%s: write() failed and returned %d\n", __func__, ret); \
+		return;                                                       \
+	}                                                                     \
+	len--;                                                                \
+									      \
+	if (par->startbyte)                                                   \
+		*(u8 *)par->buf = par->startbyte | 0x2;                       \
+									      \
+	if (len) {                                                            \
+		i = len;                                                      \
+		while (i--) {                                                 \
+			*buf++ = modifier((type)va_arg(args, unsigned int));  \
+		}                                                             \
+		if (par->gpio.dc != -1)                                       \
+			gpio_set_value(par->gpio.dc, 1);                      \
+		ret = par->fbtftops.write(par, par->buf, len * (sizeof(type)+offset)); \
+		if (ret < 0) {                                                \
+			va_end(args);                                         \
+			dev_err(par->info->device, "%s: write() failed and returned %d\n", __func__, ret); \
+			return;                                               \
+		}                                                             \
+	}                                                                     \
+	va_end(args);                                                         \
+}                                                                             \
+EXPORT_SYMBOL(func);
+
+define_fbtft_write_reg(fbtft_write_reg8_bus8, u8, )
+define_fbtft_write_reg(fbtft_write_reg16_bus8, u16, cpu_to_be16)
+define_fbtft_write_reg(fbtft_write_reg16_bus16, u16, )
+
+void fbtft_write_reg8_bus9(struct fbtft_par *par, int len, ...)
+{
+	va_list args;
+	int i, ret;
+	int pad = 0;
+	u16 *buf = (u16 *)par->buf;
+
+	if (unlikely(par->debug & DEBUG_WRITE_REGISTER)) {
+		va_start(args, len);
+		for (i = 0; i < len; i++)
+			*(((u8 *)buf) + i) = (u8)va_arg(args, unsigned int);
+		va_end(args);
+		fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par,
+			par->info->device, u8, buf, len, "%s: ", __func__);
+	}
+	if (len <= 0)
+		return;
+
+	if (par->spi && (par->spi->bits_per_word == 8)) {
+		/* we're emulating 9-bit, pad start of buffer with no-ops
+		   (assuming here that zero is a no-op) */
+		pad = (len % 4) ? 4 - (len % 4) : 0;
+		for (i = 0; i < pad; i++)
+			*buf++ = 0x000;
+	}
+
+	va_start(args, len);
+	*buf++ = (u8)va_arg(args, unsigned int);
+	i = len - 1;
+	while (i--) {
+		*buf = (u8)va_arg(args, unsigned int);
+		*buf++ |= 0x100; /* dc=1 */
+	}
+	va_end(args);
+	ret = par->fbtftops.write(par, par->buf, (len + pad) * sizeof(u16));
+	if (ret < 0) {
+		dev_err(par->info->device,
+			"%s: write() failed and returned %d\n", __func__, ret);
+		return;
+	}
+}
+EXPORT_SYMBOL(fbtft_write_reg8_bus9);
+
+
+
+
+/*****************************************************************************
+ *
+ *   int (*write_vmem)(struct fbtft_par *par);
+ *
+ *****************************************************************************/
+
+/* 16 bit pixel over 8-bit databus */
+int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len)
+{
+	u16 *vmem16;
+	u16 *txbuf16 = (u16 *)par->txbuf.buf;
+	size_t remain;
+	size_t to_copy;
+	size_t tx_array_size;
+	int i;
+	int ret = 0;
+	size_t startbyte_size = 0;
+
+	fbtft_par_dbg(DEBUG_WRITE_VMEM, par, "%s(offset=%zu, len=%zu)\n",
+		__func__, offset, len);
+
+	remain = len / 2;
+	vmem16 = (u16 *)(par->info->screen_base + offset);
+
+	if (par->gpio.dc != -1)
+		gpio_set_value(par->gpio.dc, 1);
+
+	/* non buffered write */
+	if (!par->txbuf.buf)
+		return par->fbtftops.write(par, vmem16, len);
+
+	/* buffered write */
+	tx_array_size = par->txbuf.len / 2;
+
+	if (par->startbyte) {
+		txbuf16 = (u16 *)(par->txbuf.buf + 1);
+		tx_array_size -= 2;
+		*(u8 *)(par->txbuf.buf) = par->startbyte | 0x2;
+		startbyte_size = 1;
+	}
+
+	while (remain) {
+		to_copy = remain > tx_array_size ? tx_array_size : remain;
+		dev_dbg(par->info->device, "    to_copy=%zu, remain=%zu\n",
+						to_copy, remain - to_copy);
+
+		for (i = 0; i < to_copy; i++)
+			txbuf16[i] = cpu_to_be16(vmem16[i]);
+
+		vmem16 = vmem16 + to_copy;
+		ret = par->fbtftops.write(par, par->txbuf.buf,
+						startbyte_size + to_copy * 2);
+		if (ret < 0)
+			return ret;
+		remain -= to_copy;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(fbtft_write_vmem16_bus8);
+
+/* 16 bit pixel over 9-bit SPI bus: dc + high byte, dc + low byte */
+int fbtft_write_vmem16_bus9(struct fbtft_par *par, size_t offset, size_t len)
+{
+	u8 *vmem8;
+	u16 *txbuf16 = par->txbuf.buf;
+	size_t remain;
+	size_t to_copy;
+	size_t tx_array_size;
+	int i;
+	int ret = 0;
+
+	fbtft_par_dbg(DEBUG_WRITE_VMEM, par, "%s(offset=%zu, len=%zu)\n",
+		__func__, offset, len);
+
+	if (!par->txbuf.buf) {
+		dev_err(par->info->device, "%s: txbuf.buf is NULL\n", __func__);
+		return -1;
+	}
+
+	remain = len;
+	vmem8 = par->info->screen_base + offset;
+
+	tx_array_size = par->txbuf.len / 2;
+
+	while (remain) {
+		to_copy = remain > tx_array_size ? tx_array_size : remain;
+		dev_dbg(par->info->device, "    to_copy=%zu, remain=%zu\n",
+						to_copy, remain - to_copy);
+
+#ifdef __LITTLE_ENDIAN
+		for (i = 0; i < to_copy; i += 2) {
+			txbuf16[i]   = 0x0100 | vmem8[i+1];
+			txbuf16[i+1] = 0x0100 | vmem8[i];
+		}
+#else
+		for (i = 0; i < to_copy; i++)
+			txbuf16[i]   = 0x0100 | vmem8[i];
+#endif
+		vmem8 = vmem8 + to_copy;
+		ret = par->fbtftops.write(par, par->txbuf.buf, to_copy*2);
+		if (ret < 0)
+			return ret;
+		remain -= to_copy;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(fbtft_write_vmem16_bus9);
+
+int fbtft_write_vmem8_bus8(struct fbtft_par *par, size_t offset, size_t len)
+{
+	dev_err(par->info->device, "%s: function not implemented\n", __func__);
+	return -1;
+}
+EXPORT_SYMBOL(fbtft_write_vmem8_bus8);
+
+/* 16 bit pixel over 16-bit databus */
+int fbtft_write_vmem16_bus16(struct fbtft_par *par, size_t offset, size_t len)
+{
+	u16 *vmem16;
+
+	fbtft_par_dbg(DEBUG_WRITE_VMEM, par, "%s(offset=%zu, len=%zu)\n",
+		__func__, offset, len);
+
+	vmem16 = (u16 *)(par->info->screen_base + offset);
+
+	if (par->gpio.dc != -1)
+		gpio_set_value(par->gpio.dc, 1);
+
+	/* no need for buffered write with 16-bit bus */
+	return par->fbtftops.write(par, vmem16, len);
+}
+EXPORT_SYMBOL(fbtft_write_vmem16_bus16);

drivers/staging/fbtft/fbtft-io.c

+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#ifdef CONFIG_ARCH_BCM2708
+#include <mach/platform.h>
+#endif
+#include "fbtft.h"
+
+int fbtft_write_spi(struct fbtft_par *par, void *buf, size_t len)
+{
+	struct spi_transfer t = {
+		.tx_buf = buf,
+		.len = len,
+	};
+	struct spi_message m;
+
+	fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
+		"%s(len=%d): ", __func__, len);
+
+	if (!par->spi) {
+		dev_err(par->info->device,
+			"%s: par->spi is unexpectedly NULL\n", __func__);
+		return -1;
+	}
+
+	spi_message_init(&m);
+	if (par->txbuf.dma && buf == par->txbuf.buf) {
+		t.tx_dma = par->txbuf.dma;
+		m.is_dma_mapped = 1;
+	}
+	spi_message_add_tail(&t, &m);
+	return spi_sync(par->spi, &m);
+}
+EXPORT_SYMBOL(fbtft_write_spi);
+
+/**
+ * fbtft_write_spi_emulate_9() - write SPI emulating 9-bit
+ * @par: Driver data
+ * @buf: Buffer to write
+ * @len: Length of buffer (must be divisible by 8)
+ *
+ * When 9-bit SPI is not available, this function can be used to emulate that.
+ * par->extra must hold a transformation buffer used for transfer.
+ */
+int fbtft_write_spi_emulate_9(struct fbtft_par *par, void *buf, size_t len)
+{
+	u16 *src = buf;
+	u8 *dst = par->extra;
+	size_t size = len / 2;
+	size_t added = 0;
+	int bits, i, j;
+	u64 val, dc, tmp;
+
+	fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
+		"%s(len=%d): ", __func__, len);
+
+	if (!par->extra) {
+		dev_err(par->info->device, "%s: error: par->extra is NULL\n",
+			__func__);
+		return -EINVAL;
+	}
+	if ((len % 8) != 0) {
+		dev_err(par->info->device,
+			"%s: error: len=%d must be divisible by 8\n",
+			__func__, len);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < size; i += 8) {
+		tmp = 0;
+		bits = 63;
+		for (j = 0; j < 7; j++) {
+			dc = (*src & 0x0100) ? 1 : 0;
+			val = *src & 0x00FF;
+			tmp |= dc << bits;
+			bits -= 8;
+			tmp |= val << bits--;
+			src++;
+		}
+		tmp |= ((*src & 0x0100) ? 1 : 0);
+		*(u64 *)dst = cpu_to_be64(tmp);
+		dst += 8;
+		*dst++ = (u8)(*src++ & 0x00FF);
+		added++;
+	}
+
+	return spi_write(par->spi, par->extra, size + added);
+}
+EXPORT_SYMBOL(fbtft_write_spi_emulate_9);
+
+int fbtft_read_spi(struct fbtft_par *par, void *buf, size_t len)
+{
+	int ret;
+	u8 txbuf[32] = { 0, };
+	struct spi_transfer	t = {
+			.speed_hz = 2000000,
+			.rx_buf		= buf,
+			.len		= len,
+		};
+	struct spi_message	m;
+
+	if (!par->spi) {
+		dev_err(par->info->device,
+			"%s: par->spi is unexpectedly NULL\n", __func__);
+		return -ENODEV;
+	}
+
+	if (par->startbyte) {
+		if (len > 32) {
+			dev_err(par->info->device,
+				"%s: len=%d can't be larger than 32 when using 'startbyte'\n",
+				__func__, len);
+			return -EINVAL;
+		}
+		txbuf[0] = par->startbyte | 0x3;
+		t.tx_buf = txbuf;
+		fbtft_par_dbg_hex(DEBUG_READ, par, par->info->device, u8,
+			txbuf, len, "%s(len=%d) txbuf => ", __func__, len);
+	}
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
+	ret = spi_sync(par->spi, &m);
+	fbtft_par_dbg_hex(DEBUG_READ, par, par->info->device, u8, buf, len,
+		"%s(len=%d) buf <= ", __func__, len);
+
+	return ret;
+}
+EXPORT_SYMBOL(fbtft_read_spi);
+
+
+#ifdef CONFIG_ARCH_BCM2708
+
+/*
+ *  Raspberry Pi
+ *  -  writing directly to the registers is 40-50% faster than
+ *     optimized use of gpiolib
+ */
+
+#define GPIOSET(no, ishigh)           \
+do {                                  \
+	if (ishigh)                   \
+		set |= (1 << (no));   \
+	else                          \
+		reset |= (1 << (no)); \
+} while (0)
+
+int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
+{
+	unsigned int set = 0;
+	unsigned int reset = 0;
+	u8 data;
+
+	fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
+		"%s(len=%d): ", __func__, len);
+
+	while (len--) {
+		data = *(u8 *) buf;
+		buf++;
+
+		/* Set data */
+		GPIOSET(par->gpio.db[0], (data&0x01));
+		GPIOSET(par->gpio.db[1], (data&0x02));
+		GPIOSET(par->gpio.db[2], (data&0x04));
+		GPIOSET(par->gpio.db[3], (data&0x08));
+		GPIOSET(par->gpio.db[4], (data&0x10));
+		GPIOSET(par->gpio.db[5], (data&0x20));
+		GPIOSET(par->gpio.db[6], (data&0x40));
+		GPIOSET(par->gpio.db[7], (data&0x80));
+		writel(set, __io_address(GPIO_BASE+0x1C));
+		writel(reset, __io_address(GPIO_BASE+0x28));
+
+		/* Pulse /WR low */
+		writel((1<<par->gpio.wr),  __io_address(GPIO_BASE+0x28));
+		writel(0,  __io_address(GPIO_BASE+0x28)); /* used as a delay */
+		writel((1<<par->gpio.wr),  __io_address(GPIO_BASE+0x1C));
+
+		set = 0;
+		reset = 0;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(fbtft_write_gpio8_wr);
+
+int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
+{
+	unsigned int set = 0;
+	unsigned int reset = 0;
+	u16 data;
+
+	fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
+		"%s(len=%d): ", __func__, len);
+
+	while (len) {
+		len -= 2;
+		data = *(u16 *) buf;
+		buf += 2;
+
+		/* Start writing by pulling down /WR */
+		gpio_set_value(par->gpio.wr, 0);
+
+		/* Set data */
+		GPIOSET(par->gpio.db[0],  (data&0x0001));
+		GPIOSET(par->gpio.db[1],  (data&0x0002));
+		GPIOSET(par->gpio.db[2],  (data&0x0004));
+		GPIOSET(par->gpio.db[3],  (data&0x0008));
+		GPIOSET(par->gpio.db[4],  (data&0x0010));
+		GPIOSET(par->gpio.db[5],  (data&0x0020));
+		GPIOSET(par->gpio.db[6],  (data&0x0040));
+		GPIOSET(par->gpio.db[7],  (data&0x0080));
+
+		GPIOSET(par->gpio.db[8],  (data&0x0100));
+		GPIOSET(par->gpio.db[9],  (data&0x0200));
+		GPIOSET(par->gpio.db[10], (data&0x0400));
+		GPIOSET(par->gpio.db[11], (data&0x0800));
+		GPIOSET(par->gpio.db[12], (data&0x1000));
+		GPIOSET(par->gpio.db[13], (data&0x2000));
+		GPIOSET(par->gpio.db[14], (data&0x4000));
+		GPIOSET(par->gpio.db[15], (data&0x8000));
+
+		writel(set, __io_address(GPIO_BASE+0x1C));
+		writel(reset, __io_address(GPIO_BASE+0x28));
+
+		/* Pullup /WR */
+		gpio_set_value(par->gpio.wr, 1);
+
+		set = 0;
+		reset = 0;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(fbtft_write_gpio16_wr);
+
+int fbtft_write_gpio16_wr_latched(struct fbtft_par *par, void *buf, size_t len)
+{
+	unsigned int set = 0;
+	unsigned int reset = 0;
+	u16 data;
+
+	fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
+		"%s(len=%d): ", __func__, len);
+
+	while (len) {
+		len -= 2;
+		data = *(u16 *) buf;
+		buf += 2;
+
+		/* Start writing by pulling down /WR */
+		gpio_set_value(par->gpio.wr, 0);
+
+		/* Low byte */
+		GPIOSET(par->gpio.db[0],  (data&0x0001));
+		GPIOSET(par->gpio.db[1],  (data&0x0002));
+		GPIOSET(par->gpio.db[2],  (data&0x0004));
+		GPIOSET(par->gpio.db[3],  (data&0x0008));
+		GPIOSET(par->gpio.db[4],  (data&0x0010));
+		GPIOSET(par->gpio.db[5],  (data&0x0020));
+		GPIOSET(par->gpio.db[6],  (data&0x0040));
+		GPIOSET(par->gpio.db[7],  (data&0x0080));
+		writel(set, __io_address(GPIO_BASE+0x1C));
+		writel(reset, __io_address(GPIO_BASE+0x28));
+
+		/* Pulse 'latch' high */
+		gpio_set_value(par->gpio.latch, 1);
+		gpio_set_value(par->gpio.latch, 0);
+
+		/* High byte */
+		GPIOSET(par->gpio.db[0], (data&0x0100));
+		GPIOSET(par->gpio.db[1], (data&0x0200));
+		GPIOSET(par->gpio.db[2], (data&0x0400));
+		GPIOSET(par->gpio.db[3], (data&0x0800));
+		GPIOSET(par->gpio.db[4], (data&0x1000));
+		GPIOSET(par->gpio.db[5], (data&0x2000));
+		GPIOSET(par->gpio.db[6], (data&0x4000));
+		GPIOSET(par->gpio.db[7], (data&0x8000));
+		writel(set, __io_address(GPIO_BASE+0x1C));
+		writel(reset, __io_address(GPIO_BASE+0x28));
+
+		/* Pullup /WR */
+		gpio_set_value(par->gpio.wr, 1);
+
+		set = 0;
+		reset = 0;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(fbtft_write_gpio16_wr_latched);
+
+#undef GPIOSET
+
+#else
+
+/*
+ * Optimized use of gpiolib is twice as fast as no optimization
+ * only one driver can use the optimized version at a time
+ */
+int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
+{
+	u8 data;
+	int i;
+#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
+	static u8 prev_data;
+#endif
+
+	fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
+		"%s(len=%d): ", __func__, len);
+
+	while (len--) {
+		data = *(u8 *) buf;
+
+		/* Start writing by pulling down /WR */
+		gpio_set_value(par->gpio.wr, 0);
+
+		/* Set data */
+#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
+		if (data == prev_data) {
+			gpio_set_value(par->gpio.wr, 0); /* used as delay */
+		} else {
+			for (i = 0; i < 8; i++) {
+				if ((data & 1) != (prev_data & 1))
+					gpio_set_value(par->gpio.db[i],
+								(data & 1));
+				data >>= 1;
+				prev_data >>= 1;
+			}
+		}
+#else
+		for (i = 0; i < 8; i++) {
+			gpio_set_value(par->gpio.db[i], (data & 1));
+			data >>= 1;
+		}
+#endif
+
+		/* Pullup /WR */
+		gpio_set_value(par->gpio.wr, 1);
+
+#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
+		prev_data = *(u8 *) buf;
+#endif
+		buf++;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(fbtft_write_gpio8_wr);
+
+int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
+{
+	u16 data;
+	int i;
+#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
+	static u16 prev_data;
+#endif
+
+	fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
+		"%s(len=%d): ", __func__, len);
+
+	while (len) {
+		data = *(u16 *) buf;
+
+		/* Start writing by pulling down /WR */
+		gpio_set_value(par->gpio.wr, 0);
+
+		/* Set data */
+#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
+		if (data == prev_data) {
+			gpio_set_value(par->gpio.wr, 0); /* used as delay */
+		} else {
+			for (i = 0; i < 16; i++) {
+				if ((data & 1) != (prev_data & 1))
+					gpio_set_value(par->gpio.db[i],
+								(data & 1));
+				data >>= 1;
+				prev_data >>= 1;
+			}
+		}
+#else
+		for (i = 0; i < 16; i++) {
+			gpio_set_value(par->gpio.db[i], (data & 1));
+			data >>= 1;
+		}
+#endif
+
+		/* Pullup /WR */
+		gpio_set_value(par->gpio.wr, 1);
+
+#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
+		prev_data = *(u16 *) buf;
+#endif
+		buf += 2;
+		len -= 2;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(fbtft_write_gpio16_wr);
+
+int fbtft_write_gpio16_wr_latched(struct fbtft_par *par, void *buf, size_t len)
+{
+	dev_err(par->info->device, "%s: function not implemented\n", __func__);
+	return -1;
+}
+EXPORT_SYMBOL(fbtft_write_gpio16_wr_latched);
+
+#endif /* CONFIG_ARCH_BCM2708 */

drivers/staging/fbtft/fbtft-sysfs.c

+#include "fbtft.h"
+
+
+static int get_next_ulong(char **str_p, unsigned long *val, char *sep, int base)
+{
+	char *p_val;
+	int ret;
+
+	if (!str_p || !(*str_p))
+		return -EINVAL;
+
+	p_val = strsep(str_p, sep);
+
+	if (!p_val)
+		return -EINVAL;
+
+	ret = kstrtoul(p_val, base, val);
+	if (ret)
+		return -EINVAL;
+
+	return 0;
+}
+
+int fbtft_gamma_parse_str(struct fbtft_par *par, unsigned long *curves,
+						const char *str, int size)
+{
+	char *str_p, *curve_p = NULL;
+	char *tmp;
+	unsigned long val = 0;
+	int ret = 0;
+	int curve_counter, value_counter;
+
+	fbtft_par_dbg(DEBUG_SYSFS, par, "%s() str=\n", __func__);
+
+	if (!str || !curves)
+		return -EINVAL;
+
+	fbtft_par_dbg(DEBUG_SYSFS, par, "%s\n", str);
+
+	tmp = kmalloc(size+1, GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+	memcpy(tmp, str, size+1);
+
+	/* replace optional separators */
+	str_p = tmp;
+	while (*str_p) {
+		if (*str_p == ',')
+			*str_p = ' ';
+		if (*str_p == ';')
+			*str_p = '\n';
+		str_p++;
+	}
+
+	str_p = strim(tmp);
+
+	curve_counter = 0;
+	while (str_p) {
+		if (curve_counter == par->gamma.num_curves) {
+			dev_err(par->info->device, "Gamma: Too many curves\n");
+			ret = -EINVAL;
+			goto out;
+		}
+		curve_p = strsep(&str_p, "\n");
+		value_counter = 0;
+		while (curve_p) {
+			if (value_counter == par->gamma.num_values) {
+				dev_err(par->info->device,
+					"Gamma: Too many values\n");
+				ret = -EINVAL;
+				goto out;
+			}
+			ret = get_next_ulong(&curve_p, &val, " ", 16);
+			if (ret)
+				goto out;
+			curves[curve_counter * par->gamma.num_values + value_counter] = val;
+			value_counter++;
+		}
+		if (value_counter != par->gamma.num_values) {
+			dev_err(par->info->device, "Gamma: Too few values\n");
+			ret = -EINVAL;
+			goto out;
+		}
+		curve_counter++;
+	}
+	if (curve_counter != par->gamma.num_curves) {
+		dev_err(par->info->device, "Gamma: Too few curves\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+out:
+	kfree(tmp);
+	return ret;
+}
+
+static ssize_t
+sprintf_gamma(struct fbtft_par *par, unsigned long *curves, char *buf)
+{
+	ssize_t len = 0;
+	unsigned int i, j;
+
+	mutex_lock(&par->gamma.lock);
+	for (i = 0; i < par->gamma.num_curves; i++) {
+		for (j = 0; j < par->gamma.num_values; j++)
+			len += scnprintf(&buf[len], PAGE_SIZE,
+				"%04lx ", curves[i*par->gamma.num_values + j]);
+		buf[len-1] = '\n';
+	}
+	mutex_unlock(&par->gamma.lock);
+
+	return len;
+}
+
+static ssize_t store_gamma_curve(struct device *device,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct fb_info *fb_info = dev_get_drvdata(device);
+	struct fbtft_par *par = fb_info->par;
+	unsigned long tmp_curves[FBTFT_GAMMA_MAX_VALUES_TOTAL];
+	int ret;
+
+	ret = fbtft_gamma_parse_str(par, tmp_curves, buf, count);
+	if (ret)
+		return ret;
+
+	ret = par->fbtftops.set_gamma(par, tmp_curves);
+	if (ret)
+		return ret;
+
+	mutex_lock(&par->gamma.lock);
+	memcpy(par->gamma.curves, tmp_curves,
+		par->gamma.num_curves * par->gamma.num_values * sizeof(tmp_curves[0]));
+	mutex_unlock(&par->gamma.lock);
+
+	return count;
+}
+
+static ssize_t show_gamma_curve(struct device *device,
+				struct device_attribute *attr, char *buf)
+{
+	struct fb_info *fb_info = dev_get_drvdata(device);
+	struct fbtft_par *par = fb_info->par;
+
+	return sprintf_gamma(par, par->gamma.curves, buf);
+}
+
+static struct device_attribute gamma_device_attrs[] = {
+	__ATTR(gamma, 0660, show_gamma_curve, store_gamma_curve),
+};
+
+
+void fbtft_expand_debug_value(unsigned long *debug)
+{
+	switch (*debug & 0b111) {
+	case 1:
+		*debug |= DEBUG_LEVEL_1;
+		break;
+	case 2:
+		*debug |= DEBUG_LEVEL_2;
+		break;
+	case 3:
+		*debug |= DEBUG_LEVEL_3;
+		break;
+	case 4:
+		*debug |= DEBUG_LEVEL_4;
+		break;
+	case 5:
+		*debug |= DEBUG_LEVEL_5;
+		break;
+	case 6:
+		*debug |= DEBUG_LEVEL_6;
+		break;
+	case 7:
+		*debug = 0xFFFFFFFF;
+		break;
+	}
+}
+
+static ssize_t store_debug(struct device *device,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct fb_info *fb_info = dev_get_drvdata(device);
+	struct fbtft_par *par = fb_info->par;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &par->debug);
+	if (ret)
+		return ret;
+	fbtft_expand_debug_value(&par->debug);
+
+	return count;
+}
+
+static ssize_t show_debug(struct device *device,
+				struct device_attribute *attr, char *buf)
+{
+	struct fb_info *fb_info = dev_get_drvdata(device);
+	struct fbtft_par *par = fb_info->par;
+
+	return snprintf(buf, PAGE_SIZE, "%lu\n", par->debug);
+}
+
+static struct device_attribute debug_device_attr = \
+	__ATTR(debug, 0660, show_debug, store_debug);
+
+
+void fbtft_sysfs_init(struct fbtft_par *par)
+{
+	device_create_file(par->info->dev, &debug_device_attr);
+	if (par->gamma.curves && par->fbtftops.set_gamma)
+		device_create_file(par->info->dev, &gamma_device_attrs[0]);
+}
+
+void fbtft_sysfs_exit(struct fbtft_par *par)
+{
+	device_remove_file(par->info->dev, &debug_device_attr);
+	if (par->gamma.curves && par->fbtftops.set_gamma)
+		device_remove_file(par->info->dev, &gamma_device_attrs[0]);
+}

drivers/staging/fbtft/fbtft.h

+/*
+ * Copyright (C) 2013 Noralf Tronnes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_FBTFT_H
+#define __LINUX_FBTFT_H
+
+#include <linux/fb.h>
+#include <linux/spinlock.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_device.h>
+
+
+#define FBTFT_NOP		0x00
+#define FBTFT_SWRESET	0x01
+#define FBTFT_RDDID		0x04
+#define FBTFT_RDDST		0x09
+#define FBTFT_CASET		0x2A
+#define FBTFT_RASET		0x2B
+#define FBTFT_RAMWR		0x2C
+
+#define FBTFT_ONBOARD_BACKLIGHT 2
+
+#define FBTFT_GPIO_NO_MATCH		0xFFFF
+#define FBTFT_GPIO_NAME_SIZE	32
+#define FBTFT_MAX_INIT_SEQUENCE      512
+#define FBTFT_GAMMA_MAX_VALUES_TOTAL 128
+
+#define FBTFT_OF_INIT_CMD	BIT(24)
+#define FBTFT_OF_INIT_DELAY	BIT(25)
+
+/**
+ * struct fbtft_gpio - Structure that holds one pinname to gpio mapping
+ * @name: pinname (reset, dc, etc.)
+ * @gpio: GPIO number
+ *
+ */
+struct fbtft_gpio {
+	char name[FBTFT_GPIO_NAME_SIZE];
+	unsigned gpio;
+};
+
+struct fbtft_par;
+
+/**
+ * struct fbtft_ops - FBTFT operations structure
+ * @write: Writes to interface bus
+ * @read: Reads from interface bus
+ * @write_vmem: Writes video memory to display
+ * @write_reg: Writes to controller register
+ * @set_addr_win: Set the GRAM update window
+ * @reset: Reset the LCD controller
+ * @mkdirty: Marks display lines for update
+ * @update_display: Updates the display
+ * @init_display: Initializes the display
+ * @blank: Blank the display (optional)
+ * @request_gpios_match: Do pinname to gpio matching
+ * @request_gpios: Request gpios from the kernel
+ * @free_gpios: Free previously requested gpios
+ * @verify_gpios: Verify that necessary gpios is present (optional)
+ * @register_backlight: Used to register backlight device (optional)
+ * @unregister_backlight: Unregister backlight device (optional)
+ * @set_var: Configure LCD with values from variables like @rotate and @bgr
+ *           (optional)
+ * @set_gamma: Set Gamma curve (optional)
+ *
+ * Most of these operations have default functions assigned to them in
+ *     fbtft_framebuffer_alloc()
+ */
+struct fbtft_ops {
+	int (*write)(struct fbtft_par *par, void *buf, size_t len);
+	int (*read)(struct fbtft_par *par, void *buf, size_t len);
+	int (*write_vmem)(struct fbtft_par *par, size_t offset, size_t len);
+	void (*write_register)(struct fbtft_par *par, int len, ...);
+
+	void (*set_addr_win)(struct fbtft_par *par,
+		int xs, int ys, int xe, int ye);
+	void (*reset)(struct fbtft_par *par);
+	void (*mkdirty)(struct fb_info *info, int from, int to);
+	void (*update_display)(struct fbtft_par *par,
+				unsigned start_line, unsigned end_line);
+	int (*init_display)(struct fbtft_par *par);
+	int (*blank)(struct fbtft_par *par, bool on);
+
+	unsigned long (*request_gpios_match)(struct fbtft_par *par,
+		const struct fbtft_gpio *gpio);
+	int (*request_gpios)(struct fbtft_par *par);
+	int (*verify_gpios)(struct fbtft_par *par);
+
+	void (*register_backlight)(struct fbtft_par *par);
+	void (*unregister_backlight)(struct fbtft_par *par);
+
+	int (*set_var)(struct fbtft_par *par);
+	int (*set_gamma)(struct fbtft_par *par, unsigned long *curves);
+};
+
+/**
+ * struct fbtft_display - Describes the display properties
+ * @width: Width of display in pixels
+ * @height: Height of display in pixels
+ * @regwidth: LCD Controller Register width in bits
+ * @buswidth: Display interface bus width in bits
+ * @backlight: Backlight type.
+ * @fbtftops: FBTFT operations provided by driver or device (platform_data)
+ * @bpp: Bits per pixel
+ * @fps: Frames per second
+ * @txbuflen: Size of transmit buffer
+ * @init_sequence: Pointer to LCD initialization array
+ * @gamma: String representation of Gamma curve(s)
+ * @gamma_num: Number of Gamma curves
+ * @gamma_len: Number of values per Gamma curve
+ * @debug: Initial debug value
+ *
+ * This structure is not stored by FBTFT except for init_sequence.
+ */
+struct fbtft_display {
+	unsigned width;
+	unsigned height;
+	unsigned regwidth;
+	unsigned buswidth;
+	unsigned backlight;
+	struct fbtft_ops fbtftops;
+	unsigned bpp;
+	unsigned fps;
+	int txbuflen;
+	int *init_sequence;
+	char *gamma;
+	int gamma_num;
+	int gamma_len;
+	unsigned long debug;
+};
+
+/**
+ * struct fbtft_platform_data - Passes display specific data to the driver
+ * @display: Display properties
+ * @gpios: Pointer to an array of piname to gpio mappings
+ * @rotate: Display rotation angle
+ * @bgr: LCD Controller BGR bit
+ * @fps: Frames per second (this will go away, use @fps in @fbtft_display)
+ * @txbuflen: Size of transmit buffer
+ * @startbyte: When set, enables use of Startbyte in transfers
+ * @gamma: String representation of Gamma curve(s)
+ * @extra: A way to pass extra info
+ */
+struct fbtft_platform_data {
+	struct fbtft_display display;
+	const struct fbtft_gpio *gpios;
+	unsigned rotate;
+	bool bgr;
+	unsigned fps;
+	int txbuflen;
+	u8 startbyte;
+	char *gamma;
+	void *extra;
+};
+
+/**
+ * struct fbtft_par - Main FBTFT data structure
+ *
+ * This structure holds all relevant data to operate the display
+ *
+ * See sourcefile for documentation since nested structs is not
+ * supported by kernel-doc.
+ *
+ */
+/* @spi: Set if it is a SPI device
+ * @pdev: Set if it is a platform device
+ * @info: Pointer to framebuffer fb_info structure
+ * @pdata: Pointer to platform data
+ * @ssbuf: Not used
+ * @pseudo_palette: Used by fb_set_colreg()
+ * @txbuf.buf: Transmit buffer
+ * @txbuf.len: Transmit buffer length
+ * @buf: Small buffer used when writing init data over SPI
+ * @startbyte: Used by some controllers when in SPI mode.
+ *             Format: 6 bit Device id + RS bit + RW bit
+ * @fbtftops: FBTFT operations provided by driver or device (platform_data)
+ * @dirty_lock: Protects dirty_lines_start and dirty_lines_end
+ * @dirty_lines_start: Where to begin updating display
+ * @dirty_lines_end: Where to end updating display
+ * @gpio.reset: GPIO used to reset display
+ * @gpio.dc: Data/Command signal, also known as RS
+ * @gpio.rd: Read latching signal
+ * @gpio.wr: Write latching signal
+ * @gpio.latch: Bus latch signal, eg. 16->8 bit bus latch
+ * @gpio.cs: LCD Chip Select with parallel interface bus
+ * @gpio.db[16]: Parallel databus
+ * @gpio.led[16]: Led control signals
+ * @gpio.aux[16]: Auxillary signals, not used by core
+ * @init_sequence: Pointer to LCD initialization array
+ * @gamma.lock: Mutex for Gamma curve locking
+ * @gamma.curves: Pointer to Gamma curve array
+ * @gamma.num_values: Number of values per Gamma curve
+ * @gamma.num_curves: Number of Gamma curves
+ * @debug: Pointer to debug value
+ * @current_debug:
+ * @first_update_done: Used to only time the first display update
+ * @update_time: Used to calculate 'fps' in debug output
+ * @bgr: BGR mode/\n
+ * @extra: Extra info needed by driver
+ */
+struct fbtft_par {
+	struct spi_device *spi;
+	struct platform_device *pdev;
+	struct fb_info *info;
+	struct fbtft_platform_data *pdata;
+	u16 *ssbuf;
+	u32 pseudo_palette[16];
+	struct {
+		void *buf;
+		dma_addr_t dma;
+		size_t len;
+	} txbuf;
+	u8 *buf;
+	u8 startbyte;
+	struct fbtft_ops fbtftops;
+	spinlock_t dirty_lock;
+	unsigned dirty_lines_start;
+	unsigned dirty_lines_end;
+	struct {
+		int reset;
+		int dc;
+		int rd;
+		int wr;
+		int latch;
+		int cs;
+		int db[16];
+		int led[16];
+		int aux[16];
+	} gpio;
+	int *init_sequence;
+	struct {
+		struct mutex lock;
+		unsigned long *curves;
+		int num_values;
+		int num_curves;
+	} gamma;
+	unsigned long debug;
+	bool first_update_done;
+	struct timespec update_time;
+	bool bgr;
+	void *extra;
+};
+
+#define NUMARGS(...)  (sizeof((int[]){__VA_ARGS__})/sizeof(int))
+
+#define write_reg(par, ...)                                              \
+do {                                                                     \
+	par->fbtftops.write_register(par, NUMARGS(__VA_ARGS__), __VA_ARGS__); \
+} while (0)
+
+/* fbtft-core.c */
+extern void fbtft_dbg_hex(const struct device *dev,
+	int groupsize, void *buf, size_t len, const char *fmt, ...);
+extern struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
+	struct device *dev);
+extern void fbtft_framebuffer_release(struct fb_info *info);
+extern int fbtft_register_framebuffer(struct fb_info *fb_info);
+extern int fbtft_unregister_framebuffer(struct fb_info *fb_info);
+extern void fbtft_register_backlight(struct fbtft_par *par);
+extern void fbtft_unregister_backlight(struct fbtft_par *par);
+extern int fbtft_init_display(struct fbtft_par *par);
+extern int fbtft_probe_common(struct fbtft_display *display,
+	struct spi_device *sdev, struct platform_device *pdev);
+extern int fbtft_remove_common(struct device *dev, struct fb_info *info);
+
+/* fbtft-io.c */
+extern int fbtft_write_spi(struct fbtft_par *par, void *buf, size_t len);
+extern int fbtft_write_spi_emulate_9(struct fbtft_par *par,
+	void *buf, size_t len);
+extern int fbtft_read_spi(struct fbtft_par *par, void *buf, size_t len);
+extern int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len);
+extern int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len);
+extern int fbtft_write_gpio16_wr_latched(struct fbtft_par *par,
+	void *buf, size_t len);
+
+/* fbtft-bus.c */
+extern int fbtft_write_vmem8_bus8(struct fbtft_par *par, size_t offset, size_t len);
+extern int fbtft_write_vmem16_bus16(struct fbtft_par *par, size_t offset, size_t len);
+extern int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len);
+extern int fbtft_write_vmem16_bus9(struct fbtft_par *par, size_t offset, size_t len);
+extern void fbtft_write_reg8_bus8(struct fbtft_par *par, int len, ...);
+extern void fbtft_write_reg8_bus9(struct fbtft_par *par, int len, ...);
+extern void fbtft_write_reg16_bus8(struct fbtft_par *par, int len, ...);
+extern void fbtft_write_reg16_bus16(struct fbtft_par *par, int len, ...);
+
+
+#define FBTFT_REGISTER_DRIVER(_name, _compatible, _display)                \
+									   \
+static int fbtft_driver_probe_spi(struct spi_device *spi)                  \
+{                                                                          \
+	return fbtft_probe_common(_display, spi, NULL);                    \
+}                                                                          \
+									   \
+static int fbtft_driver_remove_spi(struct spi_device *spi)                 \
+{                                                                          \
+	struct fb_info *info = spi_get_drvdata(spi);                       \
+									   \
+	return fbtft_remove_common(&spi->dev, info);                       \
+}                                                                          \
+									   \
+static int fbtft_driver_probe_pdev(struct platform_device *pdev)           \
+{                                                                          \
+	return fbtft_probe_common(_display, NULL, pdev);                   \
+}                                                                          \
+									   \
+static int fbtft_driver_remove_pdev(struct platform_device *pdev)          \
+{                                                                          \
+	struct fb_info *info = platform_get_drvdata(pdev);                 \
+									   \
+	return fbtft_remove_common(&pdev->dev, info);                      \
+}                                                                          \
+									   \
+static const struct of_device_id dt_ids[] = {                              \
+        { .compatible = _compatible },                                     \
+        {},                                                                \
+};                                                                         \
+									   \
+MODULE_DEVICE_TABLE(of, dt_ids);                                           \
+									   \
+									   \
+static struct spi_driver fbtft_driver_spi_driver = {                       \
+	.driver = {                                                        \
+		.name   = _name,                                           \
+		.owner  = THIS_MODULE,                                     \
+                .of_match_table = of_match_ptr(dt_ids),                    \
+	},                                                                 \
+	.probe  = fbtft_driver_probe_spi,                                  \
+	.remove = fbtft_driver_remove_spi,                                 \
+};                                                                         \
+									   \
+static struct platform_driver fbtft_driver_platform_driver = {             \
+	.driver = {                                                        \
+		.name   = _name,                                           \
+		.owner  = THIS_MODULE,                                     \
+                .of_match_table = of_match_ptr(dt_ids),                    \
+	},                                                                 \
+	.probe  = fbtft_driver_probe_pdev,                                 \
+	.remove = fbtft_driver_remove_pdev,                                \
+};                                                                         \
+									   \
+static int __init fbtft_driver_module_init(void)                           \
+{                                                                          \
+	int ret;                                                           \
+									   \
+	ret = spi_register_driver(&fbtft_driver_spi_driver);               \
+	if (ret < 0)                                                       \
+		return ret;                                                \
+	return platform_driver_register(&fbtft_driver_platform_driver);    \
+}                                                                          \
+									   \
+static void __exit fbtft_driver_module_exit(void)                          \
+{                                                                          \
+	spi_unregister_driver(&fbtft_driver_spi_driver);                   \
+	platform_driver_unregister(&fbtft_driver_platform_driver);         \
+}                                                                          \
+									   \
+module_init(fbtft_driver_module_init);                                     \
+module_exit(fbtft_driver_module_exit);
+
+
+/* Debug macros */
+
+/* shorthand debug levels */
+#define DEBUG_LEVEL_1	DEBUG_REQUEST_GPIOS
+#define DEBUG_LEVEL_2	(DEBUG_LEVEL_1 | DEBUG_DRIVER_INIT_FUNCTIONS | DEBUG_TIME_FIRST_UPDATE)
+#define DEBUG_LEVEL_3	(DEBUG_LEVEL_2 | DEBUG_RESET | DEBUG_INIT_DISPLAY | DEBUG_BLANK | DEBUG_REQUEST_GPIOS | DEBUG_FREE_GPIOS | DEBUG_VERIFY_GPIOS | DEBUG_BACKLIGHT | DEBUG_SYSFS)
+#define DEBUG_LEVEL_4	(DEBUG_LEVEL_2 | DEBUG_FB_READ | DEBUG_FB_WRITE | DEBUG_FB_FILLRECT | DEBUG_FB_COPYAREA | DEBUG_FB_IMAGEBLIT | DEBUG_FB_BLANK)
+#define DEBUG_LEVEL_5	(DEBUG_LEVEL_3 | DEBUG_UPDATE_DISPLAY)
+#define DEBUG_LEVEL_6	(DEBUG_LEVEL_4 | DEBUG_LEVEL_5)
+#define DEBUG_LEVEL_7	0xFFFFFFFF
+
+#define DEBUG_DRIVER_INIT_FUNCTIONS (1<<3)
+#define DEBUG_TIME_FIRST_UPDATE     (1<<4)
+#define DEBUG_TIME_EACH_UPDATE      (1<<5)
+#define DEBUG_DEFERRED_IO           (1<<6)
+#define DEBUG_FBTFT_INIT_FUNCTIONS  (1<<7)
+
+/* fbops */
+#define DEBUG_FB_READ               (1<<8)
+#define DEBUG_FB_WRITE              (1<<9)
+#define DEBUG_FB_FILLRECT           (1<<10)
+#define DEBUG_FB_COPYAREA           (1<<11)
+#define DEBUG_FB_IMAGEBLIT          (1<<12)
+#define DEBUG_FB_SETCOLREG          (1<<13)
+#define DEBUG_FB_BLANK              (1<<14)
+
+#define DEBUG_SYSFS                 (1<<16)
+
+/* fbtftops */
+#define DEBUG_BACKLIGHT             (1<<17)
+#define DEBUG_READ                  (1<<18)
+#define DEBUG_WRITE                 (1<<19)
+#define DEBUG_WRITE_VMEM            (1<<20)
+#define DEBUG_WRITE_REGISTER        (1<<21)
+#define DEBUG_SET_ADDR_WIN          (1<<22)
+#define DEBUG_RESET                 (1<<23)
+#define DEBUG_MKDIRTY               (1<<24)
+#define DEBUG_UPDATE_DISPLAY        (1<<25)
+#define DEBUG_INIT_DISPLAY          (1<<26)
+#define DEBUG_BLANK                 (1<<27)
+#define DEBUG_REQUEST_GPIOS         (1<<28)
+#define DEBUG_FREE_GPIOS            (1<<29)
+#define DEBUG_REQUEST_GPIOS_MATCH   (1<<30)
+#define DEBUG_VERIFY_GPIOS          (1<<31)
+
+
+#define fbtft_init_dbg(dev, format, arg...)                  \
+do {                                                         \
+	if (unlikely((dev)->platform_data &&                 \
+	    (((struct fbtft_platform_data *)(dev)->platform_data)->display.debug & DEBUG_DRIVER_INIT_FUNCTIONS))) \
+		dev_info(dev, format, ##arg);                \
+} while (0)
+
+#define fbtft_par_dbg(level, par, format, arg...)            \
+do {                                                         \
+	if (unlikely(par->debug & level))                    \
+		dev_info(par->info->device, format, ##arg);  \
+} while (0)
+
+#define fbtft_dev_dbg(level, par, dev, format, arg...)       \
+do {                                                         \
+	if (unlikely(par->debug & level))                    \
+		dev_info(dev, format, ##arg);                \
+} while (0)
+
+#define fbtft_par_dbg_hex(level, par, dev, type, buf, num, format, arg...) \
+do {                                                                       \
+	if (unlikely(par->debug & level))                                  \
+		fbtft_dbg_hex(dev, sizeof(type), buf, num * sizeof(type), format, ##arg); \
+} while (0)
+
+#endif /* __LINUX_FBTFT_H */