1. 18 10月, 2014 1 次提交
  2. 29 9月, 2014 1 次提交
  3. 28 8月, 2014 1 次提交
  4. 28 6月, 2014 1 次提交
  5. 14 5月, 2014 1 次提交
    • L
      net: support marking accepting TCP sockets · 84f39b08
      Lorenzo Colitti 提交于
      When using mark-based routing, sockets returned from accept()
      may need to be marked differently depending on the incoming
      connection request.
      
      This is the case, for example, if different socket marks identify
      different networks: a listening socket may want to accept
      connections from all networks, but each connection should be
      marked with the network that the request came in on, so that
      subsequent packets are sent on the correct network.
      
      This patch adds a sysctl to mark TCP sockets based on the fwmark
      of the incoming SYN packet. If enabled, and an unmarked socket
      receives a SYN, then the SYN packet's fwmark is written to the
      connection's inet_request_sock, and later written back to the
      accepted socket when the connection is established.  If the
      socket already has a nonzero mark, then the behaviour is the same
      as it is today, i.e., the listening socket's fwmark is used.
      
      Black-box tested using user-mode linux:
      
      - IPv4/IPv6 SYN+ACK, FIN, etc. packets are routed based on the
        mark of the incoming SYN packet.
      - The socket returned by accept() is marked with the mark of the
        incoming SYN packet.
      - Tested with syncookies=1 and syncookies=2.
      Signed-off-by: NLorenzo Colitti <lorenzo@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      84f39b08
  6. 06 12月, 2013 1 次提交
  7. 20 10月, 2013 1 次提交
  8. 11 10月, 2013 1 次提交
  9. 10 10月, 2013 1 次提交
    • E
      inet: includes a sock_common in request_sock · 634fb979
      Eric Dumazet 提交于
      TCP listener refactoring, part 5 :
      
      We want to be able to insert request sockets (SYN_RECV) into main
      ehash table instead of the per listener hash table to allow RCU
      lookups and remove listener lock contention.
      
      This patch includes the needed struct sock_common in front
      of struct request_sock
      
      This means there is no more inet6_request_sock IPv6 specific
      structure.
      
      Following inet_request_sock fields were renamed as they became
      macros to reference fields from struct sock_common.
      Prefix ir_ was chosen to avoid name collisions.
      
      loc_port   -> ir_loc_port
      loc_addr   -> ir_loc_addr
      rmt_addr   -> ir_rmt_addr
      rmt_port   -> ir_rmt_port
      iif        -> ir_iif
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      634fb979
  10. 24 9月, 2013 2 次提交
  11. 28 8月, 2013 1 次提交
  12. 18 3月, 2013 1 次提交
    • C
      tcp: Remove TCPCT · 1a2c6181
      Christoph Paasch 提交于
      TCPCT uses option-number 253, reserved for experimental use and should
      not be used in production environments.
      Further, TCPCT does not fully implement RFC 6013.
      
      As a nice side-effect, removing TCPCT increases TCP's performance for
      very short flows:
      
      Doing an apache-benchmark with -c 100 -n 100000, sending HTTP-requests
      for files of 1KB size.
      
      before this patch:
      	average (among 7 runs) of 20845.5 Requests/Second
      after:
      	average (among 7 runs) of 21403.6 Requests/Second
      Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1a2c6181
  13. 07 1月, 2013 1 次提交
  14. 04 11月, 2012 1 次提交
    • E
      tcp: better retrans tracking for defer-accept · e6c022a4
      Eric Dumazet 提交于
      For passive TCP connections using TCP_DEFER_ACCEPT facility,
      we incorrectly increment req->retrans each time timeout triggers
      while no SYNACK is sent.
      
      SYNACK are not sent for TCP_DEFER_ACCEPT that were established (for
      which we received the ACK from client). Only the last SYNACK is sent
      so that we can receive again an ACK from client, to move the req into
      accept queue. We plan to change this later to avoid the useless
      retransmit (and potential problem as this SYNACK could be lost)
      
      TCP_INFO later gives wrong information to user, claiming imaginary
      retransmits.
      
      Decouple req->retrans field into two independent fields :
      
      num_retrans : number of retransmit
      num_timeout : number of timeouts
      
      num_timeout is the counter that is incremented at each timeout,
      regardless of actual SYNACK being sent or not, and used to
      compute the exponential timeout.
      
      Introduce inet_rtx_syn_ack() helper to increment num_retrans
      only if ->rtx_syn_ack() succeeded.
      
      Use inet_rtx_syn_ack() from tcp_check_req() to increment num_retrans
      when we re-send a SYNACK in answer to a (retransmitted) SYN.
      Prior to this patch, we were not counting these retransmits.
      
      Change tcp_v[46]_rtx_synack() to increment TCP_MIB_RETRANSSEGS
      only if a synack packet was successfully queued.
      Reported-by: NYuchung Cheng <ycheng@google.com>
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Cc: Julian Anastasov <ja@ssi.bg>
      Cc: Vijay Subramanian <subramanian.vijay@gmail.com>
      Cc: Elliott Hughes <enh@google.com>
      Cc: Neal Cardwell <ncardwell@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e6c022a4
  15. 01 9月, 2012 1 次提交
    • J
      tcp: TCP Fast Open Server - support TFO listeners · 8336886f
      Jerry Chu 提交于
      This patch builds on top of the previous patch to add the support
      for TFO listeners. This includes -
      
      1. allocating, properly initializing, and managing the per listener
      fastopen_queue structure when TFO is enabled
      
      2. changes to the inet_csk_accept code to support TFO. E.g., the
      request_sock can no longer be freed upon accept(), not until 3WHS
      finishes
      
      3. allowing a TCP_SYN_RECV socket to properly poll() and sendmsg()
      if it's a TFO socket
      
      4. properly closing a TFO listener, and a TFO socket before 3WHS
      finishes
      
      5. supporting TCP_FASTOPEN socket option
      
      6. modifying tcp_check_req() to use to check a TFO socket as well
      as request_sock
      
      7. supporting TCP's TFO cookie option
      
      8. adding a new SYN-ACK retransmit handler to use the timer directly
      off the TFO socket rather than the listener socket. Note that TFO
      server side will not retransmit anything other than SYN-ACK until
      the 3WHS is completed.
      
      The patch also contains an important function
      "reqsk_fastopen_remove()" to manage the somewhat complex relation
      between a listener, its request_sock, and the corresponding child
      socket. See the comment above the function for the detail.
      Signed-off-by: NH.K. Jerry Chu <hkchu@google.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Cc: Neal Cardwell <ncardwell@google.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Tom Herbert <therbert@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8336886f
  16. 20 7月, 2012 1 次提交
    • Y
      net-tcp: Fast Open base · 2100c8d2
      Yuchung Cheng 提交于
      This patch impelements the common code for both the client and server.
      
      1. TCP Fast Open option processing. Since Fast Open does not have an
         option number assigned by IANA yet, it shares the experiment option
         code 254 by implementing draft-ietf-tcpm-experimental-options
         with a 16 bits magic number 0xF989. This enables global experiments
         without clashing the scarce(2) experimental options available for TCP.
      
         When the draft status becomes standard (maybe), the client should
         switch to the new option number assigned while the server supports
         both numbers for transistion.
      
      2. The new sysctl tcp_fastopen
      
      3. A place holder init function
      Signed-off-by: NYuchung Cheng <ycheng@google.com>
      Acked-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2100c8d2
  17. 06 7月, 2012 1 次提交
  18. 23 11月, 2011 1 次提交
  19. 21 10月, 2011 1 次提交
  20. 11 8月, 2011 1 次提交
  21. 09 6月, 2011 1 次提交
    • J
      tcp: RFC2988bis + taking RTT sample from 3WHS for the passive open side · 9ad7c049
      Jerry Chu 提交于
      This patch lowers the default initRTO from 3secs to 1sec per
      RFC2988bis. It falls back to 3secs if the SYN or SYN-ACK packet
      has been retransmitted, AND the TCP timestamp option is not on.
      
      It also adds support to take RTT sample during 3WHS on the passive
      open side, just like its active open counterpart, and uses it, if
      valid, to seed the initRTO for the data transmission phase.
      
      The patch also resets ssthresh to its initial default at the
      beginning of the data transmission phase, and reduces cwnd to 1 if
      there has been MORE THAN ONE retransmission during 3WHS per RFC5681.
      Signed-off-by: NH.K. Jerry Chu <hkchu@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9ad7c049
  22. 23 4月, 2011 1 次提交
  23. 13 3月, 2011 4 次提交
  24. 02 3月, 2011 1 次提交
    • D
      ipv6: Consolidate route lookup sequences. · 68d0c6d3
      David S. Miller 提交于
      Route lookups follow a general pattern in the ipv6 code wherein
      we first find the non-IPSEC route, potentially override the
      flow destination address due to ipv6 options settings, and then
      finally make an IPSEC search using either xfrm_lookup() or
      __xfrm_lookup().
      
      __xfrm_lookup() is used when we want to generate a blackhole route
      if the key manager needs to resolve the IPSEC rules (in this case
      -EREMOTE is returned and the original 'dst' is left unchanged).
      
      Otherwise plain xfrm_lookup() is used and when asynchronous IPSEC
      resolution is necessary, we simply fail the lookup completely.
      
      All of these cases are encapsulated into two routines,
      ip6_dst_lookup_flow and ip6_sk_dst_lookup_flow.  The latter of which
      handles unconnected UDP datagram sockets.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      68d0c6d3
  25. 27 6月, 2010 2 次提交
  26. 17 6月, 2010 1 次提交
    • F
      syncookies: check decoded options against sysctl settings · 8c763681
      Florian Westphal 提交于
      Discard the ACK if we find options that do not match current sysctl
      settings.
      
      Previously it was possible to create a connection with sack, wscale,
      etc. enabled even if the feature was disabled via sysctl.
      
      Also remove an unneeded call to tcp_sack_reset() in
      cookie_check_timestamp: Both call sites (cookie_v4_check,
      cookie_v6_check) zero "struct tcp_options_received", hand it to
      tcp_parse_options() (which does not change tcp_opt->num_sacks/dsack)
      and then call cookie_check_timestamp().
      
      Even if num_sacks/dsacks were changed, the structure is allocated on
      the stack and after cookie_check_timestamp returns only a few selected
      members are copied to the inet_request_sock.
      Signed-off-by: NFlorian Westphal <fw@strlen.de>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8c763681
  27. 05 6月, 2010 2 次提交
  28. 02 6月, 2010 1 次提交
  29. 24 12月, 2009 1 次提交
    • L
      net: Add rtnetlink init_rcvwnd to set the TCP initial receive window · 31d12926
      laurent chavey 提交于
      Add rtnetlink init_rcvwnd to set the TCP initial receive window size
      advertised by passive and active TCP connections.
      The current Linux TCP implementation limits the advertised TCP initial
      receive window to the one prescribed by slow start. For short lived
      TCP connections used for transaction type of traffic (i.e. http
      requests), bounding the advertised TCP initial receive window results
      in increased latency to complete the transaction.
      Support for setting initial congestion window is already supported
      using rtnetlink init_cwnd, but the feature is useless without the
      ability to set a larger TCP initial receive window.
      The rtnetlink init_rcvwnd allows increasing the TCP initial receive
      window, allowing TCP connection to advertise larger TCP receive window
      than the ones bounded by slow start.
      Signed-off-by: NLaurent Chavey <chavey@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      31d12926
  30. 16 12月, 2009 1 次提交
    • D
      tcp: Revert per-route SACK/DSACK/TIMESTAMP changes. · bb5b7c11
      David S. Miller 提交于
      It creates a regression, triggering badness for SYN_RECV
      sockets, for example:
      
      [19148.022102] Badness at net/ipv4/inet_connection_sock.c:293
      [19148.022570] NIP: c02a0914 LR: c02a0904 CTR: 00000000
      [19148.023035] REGS: eeecbd30 TRAP: 0700   Not tainted  (2.6.32)
      [19148.023496] MSR: 00029032 <EE,ME,CE,IR,DR>  CR: 24002442  XER: 00000000
      [19148.024012] TASK = eee9a820[1756] 'privoxy' THREAD: eeeca000
      
      This is likely caused by the change in the 'estab' parameter
      passed to tcp_parse_options() when invoked by the functions
      in net/ipv4/tcp_minisocks.c
      
      But even if that is fixed, the ->conn_request() changes made in
      this patch series is fundamentally wrong.  They try to use the
      listening socket's 'dst' to probe the route settings.  The
      listening socket doesn't even have a route, and you can't
      get the right route (the child request one) until much later
      after we setup all of the state, and it must be done by hand.
      
      This stuff really isn't ready, so the best thing to do is a
      full revert.  This reverts the following commits:
      
      f55017a9
      022c3f7d
      1aba721e
      cda42ebd
      345cda2f
      dc343475
      05eaade2
      6a2a2d6bSigned-off-by: NDavid S. Miller <davem@davemloft.net>
      bb5b7c11
  31. 03 12月, 2009 1 次提交
    • W
      TCPCT part 1g: Responder Cookie => Initiator · 4957faad
      William Allen Simpson 提交于
      Parse incoming TCP_COOKIE option(s).
      
      Calculate <SYN,ACK> TCP_COOKIE option.
      
      Send optional <SYN,ACK> data.
      
      This is a significantly revised implementation of an earlier (year-old)
      patch that no longer applies cleanly, with permission of the original
      author (Adam Langley):
      
          http://thread.gmane.org/gmane.linux.network/102586
      
      Requires:
         TCPCT part 1a: add request_values parameter for sending SYNACK
         TCPCT part 1b: generate Responder Cookie secret
         TCPCT part 1c: sysctl_tcp_cookie_size, socket option TCP_COOKIE_TRANSACTIONS
         TCPCT part 1d: define TCP cookie option, extend existing struct's
         TCPCT part 1e: implement socket option TCP_COOKIE_TRANSACTIONS
         TCPCT part 1f: Initiator Cookie => Responder
      
      Signed-off-by: William.Allen.Simpson@gmail.com
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4957faad
  32. 29 10月, 2009 1 次提交
  33. 19 10月, 2009 1 次提交
    • E
      inet: rename some inet_sock fields · c720c7e8
      Eric Dumazet 提交于
      In order to have better cache layouts of struct sock (separate zones
      for rx/tx paths), we need this preliminary patch.
      
      Goal is to transfert fields used at lookup time in the first
      read-mostly cache line (inside struct sock_common) and move sk_refcnt
      to a separate cache line (only written by rx path)
      
      This patch adds inet_ prefix to daddr, rcv_saddr, dport, num, saddr,
      sport and id fields. This allows a future patch to define these
      fields as macros, like sk_refcnt, without name clashes.
      Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c720c7e8
  34. 07 10月, 2009 1 次提交
    • B
      Use sk_mark for IPv6 routing lookups · 51953d5b
      Brian Haley 提交于
      Atis Elsts wrote:
      > Not sure if there is need to fill the mark from skb in tunnel xmit functions. In any case, it's not done for GRE or IPIP tunnels at the moment.
      
      Ok, I'll just drop that part, I'm not sure what should be done in this case.
      
      > Also, in this patch you are doing that for SIT (v6-in-v4) tunnels only, and not doing it for v4-in-v6 or v6-in-v6 tunnels. Any reason for that?
      
      I just sent that patch out too quickly, here's a better one with the updates.
      
      Add support for IPv6 route lookups using sk_mark.
      Signed-off-by: NBrian Haley <brian.haley@hp.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      51953d5b