- 20 4月, 2008 2 次提交
-
-
由 Guennadi Liakhovetski 提交于
Platform-specific code for Phytec's phyCORE-PXA270 platform Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Guennadi Liakhovetski 提交于
This patch adds a driver for the Quick Capture Interface on the PXA270. It is based on the original driver from Intel, but has been re-worked multiple times since then, now it also supports the V4L2 API. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 4月, 2008 38 次提交
-
-
由 Ben Dooks 提交于
Fix the pm sys device .name initialiser which was missed when updating the last patch submission. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Davide Rizzo 提交于
This patch adds functions to set clkout rate for Samsung S3C2410 This patch supersedes 4884/1, that contained an error Comments from Ben Dooks: Note, looks like this needs to be applied before 4882/1 Signed-off-by: NDavide Rizzo <davide@elpa.it> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ryan Mallon 提交于
Adds support for the generic GPIO lib to the EP93xx family. The gpio handling code has been moved from core.c to a new file called gpio.c. The GPIO based IRQ code has not been changed. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Initialise PXA devices before platform initialisation, so that platforms can parent devices to these. Acked-by: Neric miao <ymiao3@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Baryshkov 提交于
This adds support for two more leds: the wlan one (found in SL-6000W and SL-6000L) and the blutooth one (found in SL-6000W). Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Baryshkov 提交于
Now that scoop gpio's are converted to generic_gpio, tosascoop_device and tosascoop_jc_device don't have to be exported. Also make tosa_gpio_* static Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Baryshkov 提交于
Shut up sparse warnings by making GPIO_IRQ_MASK unisgned Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mark Brown 提交于
Set up the IRQ line for the WM9713 device on the Zylonite. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Neric miao <eric.y.miao@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Baryshkov 提交于
Now as the scoop pins are covered by the generic gpio API, we can use leds-gpio driver instead of special leds-tosa. Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Baryshkov 提交于
Convert set/reset_scoop_gpio to generic gpio calls. This patch depends on the pxaficp_ir hooks patch. Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The SPI information got placed in the middle of the SMC91x data. Lets move it up a few lines so that we keep related things grouped together. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Baryshkov 提交于
TOSA_GPIO_ON_KEY can't wakeup the device. But the board provides TOSA_GPIO_POWERON which is OR of (on_ac) and (on_button). Use it for wake up. Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
Although the GPIO alternate functions should be correctly set by the bootloader, configure them here to be sure. To save power, FFUART/BTUART/STUART are left unconfigured (output, low) until they are needed by pxaficp or the magician GSM chipset driver. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
This patch enables LEDs and the 1-wire bus (connected to a DS2760 battery monitor) on the magician. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Baryshkov 提交于
Add a call to pxa_set_i2c_info() to force i2c registration Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Baryshkov 提交于
Clean up all pins configuration to use currently proposed MFP table schema. Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
All magician devices I've encountered so far have featured the Toppoly TD028STEB1 display, so the Samsung LTP280QV support is untested. The power-on sequence is not correct because pxafb doesn't yet support enabling the LCD controller in the middle of the it. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
This enables rootfs on StrataFlash if the bootloader supplies the partition list. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
needed for power management (audio, BT, charging, GSM, LCD, SD), GSM, flash and SD operation and audio routing. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
Since recent PXA changes the (non-power-)I2C bus has to be explicitly enabled from board initialisation code. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
corgi_bl was renamed to generic_bl. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mark Brown 提交于
The PXA3xx will not suspend if there are no wakeup sources configured. Print a diagnostic message to make it easier for the user to see what's happening. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Neric miao <eric.y.miao@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mark Brown 提交于
Mainstone has the primary I2C bus exposed for use on plugin modules. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Neric miao <eric.y.miao@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jaya Kumar 提交于
This patch implements support for Gumstix-F flash, udc and mci. Fixes since the last time are: - Steve Sakoman as maintainer - cleanup for udc and mci setup Signed-off-by: NJaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
This is partial because mainstone's keypad is really special, some of the keys like '1', '2', ... are actually connected to two row/column juntions, thus pressing '1' is equivalent to pressing 'A' & 'H'. This is really brain damanged since it makes distinguishing between pressing '1' and multiple keys pressing of 'A' & 'H' difficult. So these special keys are not supported for the time being. Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
also update the clk definitions in pxa27x and pxa3xx. Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
NOTE: currently don't know if the key code of KEY_SUSPEND is fit for such usage. Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Changes include: 1. rename MFP_LPM_WAKEUP_ENABLE into MFP_LPM_CAN_WAKEUP to indicate the board capability of this pin to wakeup the system 2. add gpio_set_wake() and keypad_set_wake() to allow dynamically enable/disable wakeup from GPIOs and keypad GPIO * these functions are currently kept in mfp-pxa2xx.c due to their dependency to the MFP configuration 3. pxa2xx_mfp_config() only gives early warning if MFP_LPM_CAN_WAKEUP is set on incorrect pins So that the GPIO's wakeup capability is now decided by the following: a) processor's capability: (only those GPIOs which have dedicated bits within PWER/PRER/PFER can wakeup the system), this is initialized by pxa{25x,27x}_init_mfp() b) board design decides: - whether the pin is designed to wakeup the system (some of the GPIOs are configured as other functions, which is not intended to be a wakeup source), by OR'ing the pin config with MFP_LPM_CAN_WAKEUP - which edge the pin is designed to wakeup the system, this may depends on external peripherals/connections, which is totally board specific; this is indicated by MFP_LPM_EDGE_* c) the corresponding device's (most likely the gpio_keys.c) wakeup attribute: Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
1. the following code to configure PGSRx is no way portable and intuitive: - PGSR0 = 0x00008800; - PGSR1 = 0x00000002; - PGSR2 = 0x0001FC00; - PGSR3 = 0x00001F81; this is removed as low power state has already been encoded in the pin configuration definitions. Note: there is no specific reason for some of the GPIOs to drive high in low power mode as indicated by the above setting, those bits are ignored, and the result is validated to work. 2. the following code to configure GPIO wakeup is removed as this is now totally handled by pxa2xx_mfp_config(): - PWER = 0xC0000002; - PRER = 0x00000002; - PFER = 0x00000002; Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
for use by other platforms Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-