[ARM] 4948/1: magician: use htc-egpio to drive the GPIO/IRQ expander CPLD

needed for power management (audio, BT, charging, GSM, LCD, SD), GSM, flash and SD operation and audio routing.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/configs/magician_defconfig

@@ -712,6 +712,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+CONFIG_HTC_EGPIO=y
 
 #
 # Multimedia devices

arch/arm/mach-pxa/magician.c

@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/mfd/htc-egpio.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
@@ -84,6 +85,62 @@ static struct platform_device gpio_keys = {
 	.id   = -1,
 };
 
+
+/*
+ * EGPIO (Xilinx CPLD)
+ *
+ * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
+ */
+
+static struct resource egpio_resources[] = {
+	[0] = {
+		.start = PXA_CS3_PHYS,
+		.end   = PXA_CS3_PHYS + 0x20,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
+		.end   = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+	[0] = {
+		.reg_start = 0,
+		.gpio_base = MAGICIAN_EGPIO(0, 0),
+		.num_gpios = 24,
+		.direction = HTC_EGPIO_OUTPUT,
+		.initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
+	},
+	[1] = {
+		.reg_start = 4,
+		.gpio_base = MAGICIAN_EGPIO(4, 0),
+		.num_gpios = 24,
+		.direction = HTC_EGPIO_INPUT,
+	},
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+	.reg_width    = 8,
+	.bus_width    = 32,
+	.irq_base     = IRQ_BOARD_START,
+	.num_irqs     = 4,
+	.ack_register = 3,
+	.chip         = egpio_chips,
+	.num_chips    = ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device egpio = {
+	.name          = "htc-egpio",
+	.id            = -1,
+	.resource      = egpio_resources,
+	.num_resources = ARRAY_SIZE(egpio_resources),
+	.dev = {
+		.platform_data = &egpio_info,
+	},
+};
+
 /*
  * LCD - Toppoly TD028STEB1
  */
@@ -182,8 +239,8 @@ static struct physmap_flash_data strataflash_data = {
 static struct platform_device strataflash = {
 	.name          = "physmap-flash",
 	.id            = -1,
-	.num_resources = 1,
 	.resource      = &strataflash_resource,
+	.num_resources = 1,
 	.dev = {
 		.platform_data = &strataflash_data,
 	},
@@ -195,6 +252,7 @@ static struct platform_device strataflash = {
 
 static struct platform_device *devices[] __initdata = {
 	&gpio_keys,
+	&egpio,
 	&backlight,
 	&strataflash,
 };

include/asm-arm/arch-pxa/irqs.h

@@ -181,7 +181,8 @@
 #elif defined(CONFIG_ARCH_LUBBOCK) || \
       defined(CONFIG_MACH_LOGICPD_PXA270) || \
       defined(CONFIG_MACH_MAINSTONE) || \
-      defined(CONFIG_MACH_PCM027)
+      defined(CONFIG_MACH_PCM027) || \
+      defined(CONFIG_MACH_MAGICIAN)
 #define NR_IRQS			(IRQ_BOARD_END)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)

include/asm-arm/arch-pxa/magician.h

@@ -12,6 +12,7 @@
 #ifndef _MAGICIAN_H_
 #define _MAGICIAN_H_
 
+#include <asm/arch/irqs.h>
 #include <asm/arch/pxa2xx-gpio.h>
 
 /*
@@ -108,4 +109,56 @@
 #define GPIO119_MAGICIAN_UNKNOWN_MD		(119 | GPIO_OUT)
 #define GPIO120_MAGICIAN_UNKNOWN_MD		(120 | GPIO_OUT)
 
+/*
+ * CPLD IRQs
+ */
+
+#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
+#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
+#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
+#define IRQ_MAGICIAN_AC		(IRQ_BOARD_START + 3)
+
+/*
+ * CPLD EGPIOs
+ */
+
+#define MAGICIAN_EGPIO_BASE			0x80 /* GPIO_BOARD_START */
+#define MAGICIAN_EGPIO(reg,bit) \
+	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
+
+/* output */
+
+#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_CHARGE_EN		MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
+
+/* input */
+
+#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
+#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
+
+#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
+
+#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
+
 #endif /* _MAGICIAN_H_ */