The cobalt device is a PCIe card with 4 HDMI inputs (adv7604) and a
connector that can be used to hook up an adv7511 transmitter or an
adv7842 receiver daughterboard.

This device is used within Cisco but is sadly not available outside
of Cisco. Nevertheless it is a very interesting driver that can serve
as an example of how to support HDMI hardware and how to use the popular
adv devices.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

V4L2 drivers should use MONOTONIC timestamps instead of gettimeofday, which is
affected by daylight savings time.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NFederico Vaga <federico.vaga@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Enhances driver to use an MSI interrupt when available.

Adds the module option 'enable_msi' (type bool) which by default is
enabled. Can be set to 'N' to disable.

Fixes (or can reduce the occurrence of) a crash which is most commonly
reported when both digital tuners of the saa7164 chip is in use. A
reported example can be found here:
http://permalink.gmane.org/gmane.linux.drivers.video-input-infrastructure/83948Reviewed-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NBrendan McGrath <redmcg@redmandi.dyndns.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix the 0x0x prefix in integer constants.

In this case a padding 0 must also be inserted to make the constants
look like all the other 16 bits ones.
Signed-off-by: NAntonio Ospite <ao2@ao2.it>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Several lines touched by the pr_foo refactoring patches are not
following the Linux Coding style.

While we won't be fixing the style globally at the driver, we should,
at least, fix on the lines we touched.

Basically, this patch add (or remove) whitespaces and blank lines
where needed.

No functional changes.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The debug macros are not properly defined, as they generate warnings
like:

ERROR: Macros with complex values should be enclosed in parentheses
+#define core_dbg(fmt, arg...)    if (core_debug) \
+	printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg)

Use do { } while (0) for those macros.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of using printk(), use pr_foo() macros.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of implement its own hexdump logic, use the printk
format, and convert to use pr_info().
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Rename the macros to input_dbg() and ir_dbg(), using pr_fmt()
on both, to be coherent with the other debug macro changes.

The ir_dbg() also prints the IR name.

I'm not sure if it is a good idea to keep both macros here,
but merging them would require tests on different flavors of
saaa7134-based boards.

So, for now, let's keep both.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

rename the macro to vbi_dbg()/video_dbg() and use pr_fmt(),
to be coherent with the other debug macro changes.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

use just one macro instead of 2, naming it as audio_dbg() and
using pr_fmt().
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

instead of using dev->name, let's use pr_fmt() like on the
other parts of saa7134. Also, rename the debug macro to
ts_dbg() to match the namespace for the debug macros.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Converting debug prints to use pr_foo() is not trivial, as the
result will be a way worse than what's provided here, due to the
pieces of the code that prints the I2C transfers. Those use a
lot pr_cont(), and, depending on using either level 1 or 2,
a different set of macros are selected.

So, let's replace d1printk() and d2printk() macros by i2c_dbg()
and i2c_count() adding a debug level there.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On media drivers, debugging messages should be grouped into
categories, as this makes easier to debug the driver.

In the case of saa7134, the core has 2 debug categories, one
for IRQ, and another one for the core itself. The IRQ have
actually 2 levels of debug.

So, instead of using pr_dbg(), where everything would be in
the same box, let's define two macros that use pr_fmt(),
one for the core, and another one for irq.

With that, we can replace the remaining printk() occurrences
at the core to use either core_dbg() or irq_dbg(), depending
on the group of debug macros that need to be enabled.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On a few places, mostly during board detection, some printk()
macros were called without especifying any message level.

Those are actually warnings. So, use pr_warn() for them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As this module doesn't use any debug level, it is easy to
just replace all debug printks by pr_debug().
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As this module doesn't use any debug level, it is easy to
just replace all debug printks by pr_debug().
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

wprintk() macro is now just a wrapper for pr_warn(). Get rid of
it!
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On saa7134-alsa, there is just one printk macro that use a
different debug level.

It should be easy to enable/disable this one using dynamic_printk,
if one need to individually control it.

So, this module can easily use pr_debug() instead of using its
own macros.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

On a few places, the search expression used on the script that
replaced pr_info/pr_warn didn't match, because the string were
on the next line.

It is best to manually edit those lines, and re-indent the
paragraphs.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Replaces all occurrences of printk with KERN_INFO, KERN_WARNING
and KERN_ERR to pr_info/pr_warning, pr_err, using this small
shell script:

for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_INFO ','pr_info(',g <$i >a && mv a $i; done
for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_ERR ','pr_err(',g <$i >a && mv a $i; done
for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_WARNING ','pr_warn(',g <$i >a && mv a $i; done
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a pr_fmt macro, and move saa7134.h header to the beginning,
to avoid warnings when using the pr_foo macros.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The chips supported by the si2157 driver have two IF outputs (either
pins 12+13 or pins 9+11). Instead of hardcoding the output to be used
add an option to choose which output shall be used.

As this patch changes the default behaviour, the IF interface is
specified in each driver currently using si2157 driver. This is to
keep bisectability.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Remove dead code, make goto label names more expressive and add a label
in order to call mantis_dvb_exit if mantis_uart_init fails.

Also make sure that mantis_pci_exit is called if we fail the
mantis_stream_control call and that we call mantis_i2c_exit if
mantis_get_mac fails.

[mchehab@osg.samsung.com: fix merge conflict]
Signed-off-by: NSilvan Jegen <s.jegen@gmail.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/saa7164/saa7164-dvb.c: In function ‘saa7164_dvb_register’:
drivers/media/pci/saa7164/saa7164-dvb.c:701:7: warning: ‘client_tuner’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    if (!client_tuner || !client_tuner->dev.driver)
       ^
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Replace all calls to s_mbus_fmt in bridge drivers by calls to the
set_fmt pad op.

Remove the old try/s_mbus_fmt video ops since they are now no longer used.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NPrabhakar Lad <prabhakar.csengg@gmail.com>
Acked-by: NScott Jiang <scott.jiang.linux@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Replace all calls to try_mbus_fmt in bridge drivers by calls to the
set_fmt pad op.

[mchehab@osg.samsung.com: fix a merge conflict at mcam-core.c]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NScott Jiang <scott.jiang.linux@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The s_mbus_fmt video op is a duplicate of the pad op. Replace all uses
in sub-devices by the set_fmt() pad op.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The g_mbus_fmt video op is a duplicate of the pad op. Replace all uses
by the get_fmt pad op and remove the video op.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NPrabhakar Lad <prabhakar.csengg@gmail.com>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

There are a few lines longer than 80 cols for no good reason.
Fix them sooner than latter, making checkpatch.pl happy.

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Ensure that buffers are allocated from the DMA32 zone since this
device only handles 32 bit DMA addresses.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The dt3155 code is now in good shape, so move it out of staging into
drivers/media/pci. Mark in MAINTAINERS that I'll do Odd Fixes for this
driver.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The cx18 PCM video device didn't have any capabilities set, which caused a warnings
in the v4l2 core:

[    6.229393] ------------[ cut here ]------------
[    6.229414] WARNING: CPU: 1 PID: 593 at
drivers/media/v4l2-core/v4l2-ioctl.c:1025 v4l_querycap+0x41/0x70
[videodev]()
[    6.229415] Modules linked in: cx18_alsa mxl5005s s5h1409
tuner_simple tuner_types cs5345 tuner intel_rapl iosf_mbi
x86_pkg_temp_thermal coretemp raid1 snd_hda_codec_realtek kvm_intel
snd_hda_codec_generic snd_hda_codec_hdmi kvm snd_oxygen(+) snd_hda_intel
snd_oxygen_lib snd_hda_controller snd_hda_codec snd_mpu401_uart iTCO_wdt
snd_rawmidi iTCO_vendor_support snd_hwdep crct10dif_pclmul crc32_pclmul
crc32c_intel snd_seq cx18 snd_seq_device ghash_clmulni_intel
videobuf_vmalloc tveeprom cx2341x snd_pcm serio_raw videobuf_core vfat
dvb_core fat v4l2_common snd_timer videodev snd lpc_ich i2c_i801 joydev
mfd_core mei_me media soundcore tpm_infineon soc_button_array tpm_tis
mei shpchp tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc binfmt_misc
i915 nouveau mxm_wmi wmi e1000e ttm i2c_algo_bit drm_kms_helper
[    6.229444]  drm ptp pps_core video
[    6.229446] CPU: 1 PID: 593 Comm: v4l_id Not tainted
3.19.3-200.fc21.x86_64 #1
[    6.229447] Hardware name: Gigabyte Technology Co., Ltd.
Z87-D3HP/Z87-D3HP-CF, BIOS F6 01/20/2014
[    6.229448]  0000000000000000 00000000d12b1131 ffff88042dacfc28
ffffffff8176e215
[    6.229449]  0000000000000000 0000000000000000 ffff88042dacfc68
ffffffff8109bc1a
[    6.229451]  ffffffffa0594000 ffff88042dacfd90 0000000000000000
ffffffffa04e2140
[    6.229452] Call Trace:
[    6.229466]  [<ffffffff8176e215>] dump_stack+0x45/0x57
[    6.229469]  [<ffffffff8109bc1a>] warn_slowpath_common+0x8a/0xc0
[    6.229472]  [<ffffffff8109bd4a>] warn_slowpath_null+0x1a/0x20
[    6.229474]  [<ffffffffa04ca401>] v4l_querycap+0x41/0x70 [videodev]
[    6.229477]  [<ffffffffa04ca6cc>] __video_do_ioctl+0x29c/0x320 [videodev]
[    6.229479]  [<ffffffff81227131>] ? do_last+0x2f1/0x1210
[    6.229491]  [<ffffffffa04cc776>] video_usercopy+0x366/0x5d0 [videodev]
[    6.229494]  [<ffffffffa04ca430>] ? v4l_querycap+0x70/0x70 [videodev]
[    6.229497]  [<ffffffffa04cc9f5>] video_ioctl2+0x15/0x20 [videodev]
[    6.229499]  [<ffffffffa04c6794>] v4l2_ioctl+0x164/0x180 [videodev]
[    6.229501]  [<ffffffff8122e298>] do_vfs_ioctl+0x2f8/0x500
[    6.229502]  [<ffffffff8122e521>] SyS_ioctl+0x81/0xa0
[    6.229505]  [<ffffffff81774a09>] system_call_fastpath+0x12/0x17
[    6.229506] ---[ end trace dacd80d4b19277ea ]---

Added the necessary capabilities to stop this warning.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NLaura Abbott <labbott@redhat.com>
Cc: <stable@vger.kernel.org>      # for v3.19 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The patches that added support for HVR2255 and HVR2205 added
some CodingStyle issues.

Better to fix it sooner than latter.

Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix the VIDIOC_QUERYCAP warning due to the missing device_caps. Don't fill
in the version field, the V4L2 core will do that for you.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v3.19 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

QAM mode in the LGDT3306 auto detects inversion. VSB does not.
Forgot to include tis fact in the original patch set.
Tested with QAM and VSB after this patch, working fine.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Updates the copyright notes at the saa7164 driver.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Adding support for the Hauppauge HVR2255 and Hauppauge HVR2205
PCIe cards. Digital TV for DVB-T and ATSC/US-Cable is known to
work. Support for analog RF tuners does not work due to
a lack of analog support in the upstream SI2157 driver.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Workaround oddball I2C issues caused by using newer
SILABS devices.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Assists with debugging difficult I2C devices.
Signed-off-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>