Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 01 4月, 2013 2 次提交
  3. 14 11月, 2012 1 次提交
  5. 09 10月, 2012 1 次提交
  7. 04 10月, 2012 1 次提交
  9. 28 9月, 2012 1 次提交
    • D
      Make most arch asm/module.h files use asm-generic/module.h · 786d35d4
      由 David Howells 提交于 
      Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela,
ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version
into asm-generic/module.h for all arches bar MIPS.

Also, use the generic definition mod_arch_specific where possible.

To this end, I've defined three new config bools:

 (*) HAVE_MOD_ARCH_SPECIFIC

     Arches define this if they don't want to use the empty generic
     mod_arch_specific struct.

 (*) MODULES_USE_ELF_RELA

     Arches define this if their modules can contain RELA records.  This causes
     the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be
     defined by the arch rather than have the core emit an error message.

 (*) MODULES_USE_ELF_REL

     Arches define this if their modules can contain REL records.  This causes
     the Elf_Rel mapping to be emitted and allows apply_relocate() to be
     defined by the arch rather than have the core emit an error message.

Note that it is possible to allow both REL and RELA records: m68k and mips are
two arches that do this.

With this, some arch asm/module.h files can be deleted entirely and replaced
with a generic-y marker in the arch Kbuild file.

Additionally, I have removed the bits from m32r and score that handle the
unsupported type of relocation record as that's now handled centrally.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
      786d35d4
  11. 20 9月, 2012 1 次提交
  13. 27 5月, 2012 1 次提交
    • L
      word-at-a-time: make the interfaces truly generic · 36126f8f
      由 Linus Torvalds 提交于 
      This changes the interfaces in <asm/word-at-a-time.h> to be a bit more
complicated, but a lot more generic.

In particular, it allows us to really do the operations efficiently on
both little-endian and big-endian machines, pretty much regardless of
machine details.  For example, if you can rely on a fast population
count instruction on your architecture, this will allow you to make your
optimized <asm/word-at-a-time.h> file with that.

NOTE! The "generic" version in include/asm-generic/word-at-a-time.h is
not truly generic, it actually only works on big-endian.  Why? Because
on little-endian the generic algorithms are wasteful, since you can
inevitably do better. The x86 implementation is an example of that.

(The only truly non-generic part of the asm-generic implementation is
the "find_zero()" function, and you could make a little-endian version
of it.  And if the Kbuild infrastructure allowed us to pick a particular
header file, that would be lovely)

The <asm/word-at-a-time.h> functions are as follows:

 - WORD_AT_A_TIME_CONSTANTS: specific constants that the algorithm
   uses.

 - has_zero(): take a word, and determine if it has a zero byte in it.
   It gets the word, the pointer to the constant pool, and a pointer to
   an intermediate "data" field it can set.

   This is the "quick-and-dirty" zero tester: it's what is run inside
   the hot loops.

 - "prep_zero_mask()": take the word, the data that has_zero() produced,
   and the constant pool, and generate an *exact* mask of which byte had
   the first zero.  This is run directly *outside* the loop, and allows
   the "has_zero()" function to answer the "is there a zero byte"
   question without necessarily getting exactly *which* byte is the
   first one to contain a zero.

   If you do multiple byte lookups concurrently (eg "hash_name()", which
   looks for both NUL and '/' bytes), after you've done the prep_zero_mask()
   phase, the result of those can be or'ed together to get the "either
   or" case.

 - The result from "prep_zero_mask()" can then be fed into "find_zero()"
   (to find the byte offset of the first byte that was zero) or into
   "zero_bytemask()" (to find the bytemask of the bytes preceding the
   zero byte).

   The existence of zero_bytemask() is optional, and is not necessary
   for the normal string routines.  But dentry name hashing needs it, so
   if you enable DENTRY_WORD_AT_A_TIME you need to expose it.

This changes the generic strncpy_from_user() function and the dentry
hashing functions to use these modified word-at-a-time interfaces.  This
gets us back to the optimized state of the x86 strncpy that we lost in
the previous commit when moving over to the generic version.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      36126f8f
  15. 04 8月, 2011 1 次提交
  17. 09 10月, 2010 1 次提交
  19. 15 1月, 2009 1 次提交
  21. 07 1月, 2009 1 次提交
  23. 05 1月, 2009 2 次提交
  25. 03 1月, 2009 7 次提交
  27. 05 12月, 2008 1 次提交
  29. 07 9月, 2008 1 次提交
  31. 29 8月, 2008 2 次提交
  33. 28 7月, 2008 2 次提交
    • S
      sparc: enable headers_export again · a1bd021e
      由 Sam Ravnborg 提交于 
      Update include/asm/Kbuild so we export
all relvant headers for sparc.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
      a1bd021e
    • S
      sparc, sparc64: use arch/sparc/include · a439fe51
      由 Sam Ravnborg 提交于 
      The majority of this patch was created by the following script:

***
ASM=arch/sparc/include/asm
mkdir -p $ASM
git mv include/asm-sparc64/ftrace.h $ASM
git rm include/asm-sparc64/*
git mv include/asm-sparc/* $ASM
sed -ie 's/asm-sparc64/asm/g' $ASM/*
sed -ie 's/asm-sparc/asm/g' $ASM/*
***

The rest was an update of the top-level Makefile to use sparc
for header files when sparc64 is being build.
And a small fixlet to pick up the correct unistd.h from
sparc64 code.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
      a439fe51
  35. 18 7月, 2008 3 次提交
    • S
      sparc: join the remaining header files · f5e706ad
      由 Sam Ravnborg 提交于 
      With this commit all sparc64 header files are moved to asm-sparc.
The remaining files (71 files) were too different to be trivially
merged so divide them up in a _32.h and a _64.h file which
are both included from the file with no bit size.

The following script were used:
cd include
FILES=`wc -l asm-sparc64/*h | grep -v '^     1' | cut -b 20-`

for FILE in ${FILES}; do
  echo $FILE:
  BASE=`echo $FILE | cut -d '.' -f 1`
  FN32=${BASE}_32.h
  FN64=${BASE}_64.h
  GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H
  git mv asm-sparc/$FILE asm-sparc/$FN32
  git mv asm-sparc64/$FILE asm-sparc/$FN64
  echo git mv done
  printf "#ifndef %s\n" $GUARD                             >   asm-sparc/$FILE
  printf "#define %s\n" $GUARD                             >>  asm-sparc/$FILE
  printf "#if defined(__sparc__) && defined(__arch64__)\n" >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN64                 >>  asm-sparc/$FILE
  printf "#else\n"                                         >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN32                 >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  git add asm-sparc/$FILE
  echo new file done
  printf "#include <asm-sparc/%s>\n" $FILE                 >  asm-sparc64/$FILE
  git add asm-sparc64/$FILE
  echo sparc64 file done
done

The guard contains three '_' to avoid conflict with existing guards.
In additing the two Kbuild files are emptied to avoid breaking
headers_* targets.
We will reintroduce the exported header files when the necessary
kbuild changes are merged.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f5e706ad
    • S
      sparc: export openprom.h to userspace · b1a8bf92
      由 Sam Ravnborg 提交于 
      sparc64 exports openprom.h to userspace so let sparc follow
the example.
As openprom.h pulled in another not-for-export vaddrs.h header
file it required a few changes to fix the build.

The definition af VMALLOC_* were moved to pgtable as this is
where sparc64 has them.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
      b1a8bf92
    • S
      sparc: copy exported sparc64 specific header files to asm-sparc · 09d3e1ba
      由 Sam Ravnborg 提交于 
      Copy was done using the following simple script:

set -e
SPARC64="h display7seg.h envctrl.h psrcompat.h pstate.h uctx.h utrap.h watchdog.h"
for FILE in ${SPARC64}; do
	if [ -f asm-sparc/$FILE ]; then
		echo $FILE exist in asm-sparc
	fi
	cat asm-sparc64/$FILE > asm-sparc/$FILE
	printf "#include <asm-sparc/$FILE>\n" > asm-sparc64/$FILE
done

The name of the copied files are added to asm-sparc/Kbuild
to keep "make headers_check" functional.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
      09d3e1ba
  37. 22 4月, 2008 1 次提交
  39. 21 9月, 2006 1 次提交
  41. 19 9月, 2006 1 次提交
  43. 20 6月, 2006 1 次提交
  45. 18 6月, 2006 1 次提交