- 14 8月, 2015 1 次提交
-
-
由 Thomas Abraham 提交于
For Exynos5250 platforms, add CPU operating points and CPU regulator supply properties for migrating from Exynos specific cpufreq driver to using generic cpufreq driver. Cc: Doug Anderson <dianders@chromium.org> Cc: Andreas Faerber <afaerber@suse.de> Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> [b.zolnierkie: split Exynos5250 support from the original patch] [b.zolnierkie: added CPU regulator supply property for Spring boards] Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NJavier Martinez Canillas <javier@dowhile0.org> Tested-by: NJavier Martinez Canillas <javier@dowhile0.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
- 09 5月, 2015 1 次提交
-
-
由 Yadwinder Singh Brar 提交于
This patch adds pinctrl configuration for using configuring gpx3-2 as an external interrupt from max77686. Though max77686 RTC is enabled and gets probed by default, it doesnt work as its unable to get interrupt. This patch makes max77686 RTC work and also configures it as wakeup source. Signed-off-by: NYadwinder Singh Brar <yadi.brar@samsung.com> [pankaj.dubey: resubmitted after rebasing to latest kgene tree] Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NPankaj Dubey <pankaj.dubey@samsung.com> Acked-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NKukjin Kim <kgene@kernel.org>
-
- 20 10月, 2014 1 次提交
-
-
由 Andreas Faerber 提交于
Use the new style for referencing inherited nodes and use symbolic names. Goal is the alignment of all exynos5250 based device trees for comparison. Signed-off-by: NAndreas Faerber <afaerber@suse.de> Reviewed-by: NTomasz Figa <t.figa@samsung.com> [kgene.kim@samsung.com: rebased and squashed] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 19 8月, 2014 1 次提交
-
-
由 Jaehoon Chung 提交于
dw-mmc controller can support multiple slots. But, there are no use-cases anywhere. So we don't need to support the slot-node for dw-mmc controller. And "supports-highspeed" property in dw-mmc is deprecated. "supports-highspeed" property can be replaced with "cap-sd/mmc-highspeed". Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com> Reviewed-by: NTushar Behera <trblinux@gmail.com> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Tested-by: NSachin Kamat <sachin.kamat@samsung.com> [kgene.kim@samsung.com: rebased exynos5250-snow changes] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 30 7月, 2014 1 次提交
-
-
由 Thomas Abraham 提交于
The IRQB interrupt pin of MAX77686 PMIC is connected to GPX3[2] pin of Exynos5250 on the Exynos5250 SMDK board. Specify this connection using interrupts property for the max77686 pmic node. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 18 7月, 2014 1 次提交
-
-
由 Naveen Krishna Chatradhi 提交于
This patch replaces the "cs-gpio" from "controller-data" node as was specified in the old binding and uses the standard "cs-gpios" property expected by the SPI core as is defined now in the spi-s3c64xx driver DT binding. Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 21 3月, 2014 1 次提交
-
-
由 Sachin Kamat 提交于
Add generic compatible strings to the respective board DT files. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 18 3月, 2014 2 次提交
-
-
由 Yuvaraj Kumar C D 提交于
This patch adds dt entry for ahci sata controller and its corresponding phy controller.phy node has been added w.r.t new generic phy framework. Signed-off-by: NYuvaraj Kumar C D <yuvaraj.cd@samsung.com> Acked-by: NKishon Vijay Abraham I <kishon@ti.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Now that the SPI controllers are disabled by default for Exynos5250 there is no need to explicitly disable them in individual board files. This hunk appears not to have been merged when doing the original conversion, add it now. Signed-off-by: NMark Brown <broonie@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 24 2月, 2014 2 次提交
-
-
由 Sachin Kamat 提交于
Some boards might not have RTC xtal, so RTC shouldn't really be enabled by default. Enable it in the required board files. For now enable it for all board files to maintain the enabled status exisitng prior to this patch. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Thomas Abraham 提交于
Add Maxim 77686 PMIC node for EXYNOS5250 based SMDK5250 board. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 21 12月, 2013 4 次提交
-
-
由 Mark Brown 提交于
Ensure that unused I2C controllers are not activated, causing problems due to inappropriate pinmuxing or similar, by marking the controllers as disabled by default and requiring boards to explicitly enable those that are in use. Signed-off-by: NMark Brown <broonie@linaro.org> Acked-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
Rather than requiring each board to explicitly disable the SPI controllers it is not using instead require boards to enable those that they are using. This is less work overall since normally at most one of the controllers is in use and avoids issues caused by inappropriate pinmuxing. Signed-off-by: NMark Brown <broonie@linaro.org> Acked-by: NTomasz Figa <t.figa@samsung.com> Reviewed-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Mark Brown 提交于
There is a 16.934MHz fixed rate clock connected to MCLK1 on the CODEC, add this to the device tree bindings. Signed-off-by: NMark Brown <broonie@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tomasz Figa 提交于
For consistency with other device tree nodes, this patch adds missing spaces after node labels. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 16 12月, 2013 3 次提交
-
-
由 Yuvaraj Kumar C D 提交于
This patch rename's the device tree mmc node's from "dwmmc" to "mmc". According to ePAPR chapter 2.2.2 generic node name recommendation, it has been opted change from dwmmc to mmc.Also this patch remove the instance index from the node name. Signed-off-by: NYuvaraj Kumar C D <yuvaraj.cd@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Yuvaraj Kumar C D 提交于
As fifo-depth property in dw_mmc device tree node is SOC specific, move this property to exynos5250 SOC specific file. Signed-off-by: NYuvaraj Kumar C D <yuvaraj.cd@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> [kgene.kim@samsung.com: squashed fifo-depth patch for cros5250-common] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Yuvaraj Kumar C D 提交于
According to ePAPR, chapter 2.3.4, the status property has defined that it should be set to "disabled" when "the device is not presently operational, but it might become operational in the future". So this patch disable dwmmc node by "status = disabled" in SOC dts file and enable dwmmc node by "status = okay" in board specific dts file. Signed-off-by: NYuvaraj Kumar C D <yuvaraj.cd@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 07 10月, 2013 1 次提交
-
-
由 Mark Brown 提交于
Rather than requiring each board to explicitly disable the I2S controllers it is not using instead require boards to enable those that they are using. This is required for audio operation on Arndale, one of the unused I2S controllers is pinmuxed with the LDO enable GPIOs for the WM1811A. Signed-off-by: NMark Brown <broonie@linaro.org> Acked-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 19 8月, 2013 2 次提交
-
-
由 Vikas Sajjan 提交于
Moves the properties of DP controller to exynos5.dtsi which are common across exynos5 SoCs like Exynos5250 and Exynos5420. The PHY DP Node is based on Jingoo Han's <jg1.han@samsung.com> patch at https://patchwork.linuxtv.org/patch/19189/Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vikas Sajjan 提交于
As the display-timing information is parsed by FIMD driver, it makes sense to move the display-timing DT node inside FIMD DT node for exynos5250 Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 28 6月, 2013 1 次提交
-
-
由 Rahul Sharma 提交于
This patch renames the combatible strings for hdmi, mixer, ddc and hdmiphy. It follows the convention of using compatible string which represent the SoC in which the IP was added for the first time. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 19 6月, 2013 1 次提交
-
-
由 Padmavathi Venna 提交于
Replace /include/ (dtc) with #include (C pre-processor) for all Samsung DT files Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 18 6月, 2013 1 次提交
-
-
由 Padmavathi Venna 提交于
This patch adds the required regulator supplies and properties for wm8994 codec on smdk5250 board. Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 12 6月, 2013 1 次提交
-
-
由 Jingoo Han 提交于
Add pin state information for DP HPD support that requires pin configuration support using pinctrl interface. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 10 5月, 2013 1 次提交
-
-
由 Doug Anderson 提交于
The 'samsung,vbus-gpio' was submitted before pinmux landed for exynos5250 and uses the old-style gpio specifier. Fix the two exynos5250 boards that use it. Signed-off-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 09 4月, 2013 2 次提交
-
-
由 Leela Krishna Amudala 提交于
Add display timing node to exynos5250-smdk5250.dts Signed-off-by: NLeela Krishna Amudala <l.krishna@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Thomas Abraham 提交于
Add default pin state information for all client nodes that require pin configuration support using pinctrl interface. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Tested-by: NDoug Anderson <dianders@chromium.org> Reviewed-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 25 3月, 2013 1 次提交
-
-
由 Thomas Abraham 提交于
The clock frequency of xxti and xusbxti clocks is dependent on the frequency of the on-board oscillator that is used to generate these clocks. So allow the frequency of these clocks to be specfied from device tree. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 07 3月, 2013 2 次提交
-
-
由 Vivek Gautam 提交于
Adding EHCI device tree node for Exynos5250 along with the device base adress and gpio line for vbus. Signed-off-by: NVivek Gautam <gautam.vivek@samsung.com> Acked-by: NJingoo Han <jg1.han@samsung.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jingoo Han 提交于
Add device tree node for DP controller in EXYNOS5250 and enable the instance for the SMDK5250 board. Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 25 2月, 2013 1 次提交
-
-
由 Doug Anderson 提交于
The next change will remove the code from the dw_mmc-exynos that added the DW_MCI_QUIRK_NO_WRITE_PROTECT. Keep existing functionality of having no write protect pin on smdk5250 by adding the disable-wp property. Signed-off-by: NDoug Anderson <dianders@chromium.org> Acked-by: NSeungwon Jeon <tgih.jun@samsung.com> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 29 1月, 2013 2 次提交
-
-
由 Padmavathi Venna 提交于
Add the basic device tree based lookup. Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Padmavathi Venna 提交于
Add device nodes for the three instances of i2s controllers in Exynos5 platforms. Enable instance i2s 0 for exynos5250 board and disable all other i2s instances. Signed-off-by: NPadmavathi Venna <padma.v@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 17 1月, 2013 1 次提交
-
-
由 Alim Akhtar 提交于
As per the current exynos-dw-mshc bindings, dw-mshc-sdr-timing and dw-mshc-ddr-timing properties are having only two cells, these properties are wrongly set for exynos5250 based cros5250 and smdk5250 platfroms. This patch corrects above timing propreties for above platfroms Signed-off-by: NAlim Akhtar <alim.akhtar@samsung.com> Tested-by: NDoug Anderson <dianders@chromium.org> Acked-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 21 11月, 2012 1 次提交
-
-
由 Doug Anderson 提交于
The aliases for dwmmc were placed in the SMDK5250 dts file but really should be common for all exynos5250 boards. Move it to the common CPU file. Signed-off-by: NDoug Anderson <dianders@chromium.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 20 11月, 2012 1 次提交
-
-
由 Vasanth Ananthan 提交于
This patch adds Device Nodes for SATA and SATA PHY device. Signed-off-by: NVasanth Ananthan <vasanth.a@samsung.com> [kgene.kim@samsung.com: removed address definitions as per comments] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 29 10月, 2012 3 次提交
-
-
由 Rahul Sharma 提交于
This patch adds support for device tree based discovery for exynos5 hdmi ddc. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Rahul Sharma 提交于
This patch adds support for device tree based discovery for exynos5 hdmiphy. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Rahul Sharma 提交于
This patch adds support for device tree based discovery for exynos5 hdmi. Hdmi node is also renamed with "exynos5-hdmi". Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-