提交 f8bfe2b0 编写于 作者: T Thomas Abraham 提交者: Kukjin Kim

ARM: dts: add pin state information in client nodes for Exynos5 platforms

Add default pin state information for all client nodes that require
pin configuration support using pinctrl interface.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Tested-by: NDoug Anderson <dianders@chromium.org>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
上级 045c8f63
......@@ -19,11 +19,19 @@
chosen {
};
pinctrl@11400000 {
/*
* Disabled pullups since external part has its own pullups and
* double-pulling gets us out of spec in some cases.
*/
i2c2_bus: i2c2-bus {
samsung,pin-pud = <0>;
};
};
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
gpios = <&gpb3 0 2 3 0>,
<&gpb3 1 2 3 0>;
max77686@09 {
compatible = "maxim,max77686";
......@@ -167,21 +175,12 @@
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
gpios = <&gpb3 2 2 3 0>,
<&gpb3 3 2 3 0>;
};
i2c@12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
/*
* Disabled pullups since external part has its own pullups and
* double-pulling gets us out of spec in some cases.
*/
gpios = <&gpa0 6 3 0 0>,
<&gpa0 7 3 0 0>;
hdmiddc@50 {
compatible = "samsung,exynos5-hdmiddc";
reg = <0x50>;
......@@ -191,8 +190,6 @@
i2c@12C90000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
gpios = <&gpa1 2 3 3 0>,
<&gpa1 3 3 3 0>;
};
i2c@12CA0000 {
......@@ -202,8 +199,6 @@
i2c@12CB0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
gpios = <&gpa2 2 3 3 0>,
<&gpa2 3 3 3 0>;
};
i2c@12CC0000 {
......@@ -213,8 +208,6 @@
i2c@12CD0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
gpios = <&gpb2 2 3 3 0>,
<&gpb2 3 3 3 0>;
};
i2c@12CE0000 {
......@@ -236,15 +229,12 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
};
};
......@@ -260,15 +250,13 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
wp-gpios = <&gpc2 1 0 0 3>;
gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
wp-gpios = <&gpc2 1 0>;
};
};
......@@ -281,11 +269,11 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
/* See board-specific dts files for pin setup */
slot@0 {
reg = <0>;
bus-width = <4>;
/* See board-specific dts files for GPIOs */
};
};
......@@ -294,9 +282,6 @@
};
spi_1: spi@12d30000 {
gpios = <&gpa2 4 2 3 0>,
<&gpa2 6 2 3 0>,
<&gpa2 7 2 3 0>;
samsung,spi-src-clk = <0>;
num-cs = <1>;
};
......@@ -306,7 +291,7 @@
};
hdmi {
hpd-gpio = <&gpx3 7 0xf 1 3>;
hpd-gpio = <&gpx3 7 0>;
};
gpio-keys {
......@@ -314,7 +299,7 @@
power {
label = "Power";
gpios = <&gpx1 3 0 0x10000 0>;
gpios = <&gpx1 3 1>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
......
/*
* Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
* tree nodes are listed in this file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/ {
pinctrl@11400000 {
gpa0: gpa0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpa1: gpa1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpa2: gpa2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpb0: gpb0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpb1: gpb1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpb2: gpb2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpb3: gpb3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc0: gpc0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc1: gpc1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc2: gpc2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc3: gpc3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd0: gpd0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd1: gpd1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpy0: gpy0 {
gpio-controller;
#gpio-cells = <2>;
};
gpy1: gpy1 {
gpio-controller;
#gpio-cells = <2>;
};
gpy2: gpy2 {
gpio-controller;
#gpio-cells = <2>;
};
gpy3: gpy3 {
gpio-controller;
#gpio-cells = <2>;
};
gpy4: gpy4 {
gpio-controller;
#gpio-cells = <2>;
};
gpy5: gpy5 {
gpio-controller;
#gpio-cells = <2>;
};
gpy6: gpy6 {
gpio-controller;
#gpio-cells = <2>;
};
gpc4: gpc4 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpx0: gpx0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&combiner>;
#interrupt-cells = <2>;
interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
<26 0>, <26 1>, <27 0>, <27 1>;
};
gpx1: gpx1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&combiner>;
#interrupt-cells = <2>;
interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
<30 0>, <30 1>, <31 0>, <31 1>;
};
gpx2: gpx2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpx3: gpx3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
};
i2c2_hs_bus: i2c2-hs-bus {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
};
uart2_data: uart2-data {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart2_fctl: uart2-fctl {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
i2c3_bus: i2c3-bus {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
};
i2c3_hs_bus: i2c3-hs-bus {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
};
uart3_data: uart3-data {
samsung,pins = "gpa1-4", "gpa1-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c4_bus: i2c4-bus {
samsung,pins = "gpa2-0", "gpa2-1";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
};
i2c5_bus: i2c5-bus {
samsung,pins = "gpa2-2", "gpa2-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
ac97_bus: ac97-bus {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2s2_bus: i2s2-bus {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pcm2_bus: pcm2-bus {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
spdif_bus: spdif-bus {
samsung,pins = "gpb1-0", "gpb1-1";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
spi2_bus: spi2-bus {
samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
samsung,pin-function = <5>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c6_bus: i2c6-bus {
samsung,pins = "gpb1-3", "gpb1-4";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c7_bus: i2c7-bus {
samsung,pins = "gpb2-2", "gpb2-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c1_bus: i2c1-bus {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2c0_hs_bus: i2c0-hs-bus {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
};
i2c1_hs_bus: i2c1-hs-bus {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpc0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpc0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpc0-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpc0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpc2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpc2-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpc2-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpc2-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpc3-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpc3-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpc3-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpc3-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd2_bus8: sd2-bus-width8 {
samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd3_clk: sd3-clk {
samsung,pins = "gpc4-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd3_cmd: sd3-cmd {
samsung,pins = "gpc4-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd3_cd: sd3-cd {
samsung,pins = "gpc4-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd3_bus1: sd3-bus-width1 {
samsung,pins = "gpc4-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd3_bus4: sd3-bus-width4 {
samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
uart1_data: uart1-data {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
};
pinctrl@13400000 {
gpe0: gpe0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpe1: gpe1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf0: gpf0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf1: gpf1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg0: gpg0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg1: gpg1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg2: gpg2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gph0: gph0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gph1: gph1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
cam_gpio_a: cam-gpio-a {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
cam_gpio_b: cam-gpio-b {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
cam_i2c2_bus: cam-i2c2-bus {
samsung,pins = "gpe0-6", "gpe1-0";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
};
cam_spi1_bus: cam-spi1-bus {
samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
cam_i2c1_bus: cam-i2c1-bus {
samsung,pins = "gpf0-2", "gpf0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
};
cam_i2c0_bus: cam-i2c0-bus {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samaung,pin-drv = <0>;
};
cam_spi0_bus: cam-spi0-bus {
samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
cam_bayrgb_bus: cam-bayrgb-bus {
samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
"gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
"gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
"gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
"gpg2-0", "gpg2-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
cam_port_a: cam-port-a {
samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
"gph1-0", "gph1-1", "gph1-2", "gph1-3",
"gph1-4", "gph1-5", "gph1-6", "gph1-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
};
pinctrl@10d10000 {
gpv0: gpv0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpv1: gpv1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpv2: gpv2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpv3: gpv3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpv4: gpv4 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
c2c_rxd: c2c-rxd {
samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
c2c_txd: c2c-txd {
samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samaung,pin-drv = <0>;
};
};
pinctrl@03680000 {
gpz: gpz {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
i2s0_bus: i2s0-bus {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
};
......@@ -30,8 +30,6 @@
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
gpios = <&gpb3 0 2 3 0>,
<&gpb3 1 2 3 0>;
eeprom@50 {
compatible = "samsung,s524ad0xd1";
......@@ -42,8 +40,6 @@
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
gpios = <&gpb3 2 2 3 0>,
<&gpb3 3 2 3 0>;
eeprom@51 {
compatible = "samsung,s524ad0xd1";
......@@ -74,8 +70,6 @@
i2c@12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
gpios = <&gpa0 6 3 3 0>,
<&gpa0 7 3 3 0>;
hdmiddc@50 {
compatible = "samsung,exynos5-hdmiddc";
......@@ -122,15 +116,12 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
};
};
......@@ -146,17 +137,13 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
disable-wp;
gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
<&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
<&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
};
};
......@@ -169,10 +156,6 @@
};
spi_1: spi@12d30000 {
gpios = <&gpa2 4 2 3 0>,
<&gpa2 6 2 3 0>,
<&gpa2 7 2 3 0>;
w25q80bw@0 {
#address-cells = <1>;
#size-cells = <1>;
......@@ -181,7 +164,7 @@
spi-max-frequency = <1000000>;
controller-data {
cs-gpio = <&gpa2 5 1 0 3>;
cs-gpio = <&gpa2 5 0>;
samsung,spi-feedback-delay = <0>;
};
......@@ -203,7 +186,7 @@
};
hdmi {
hpd-gpio = <&gpx3 7 0xf 1 3>;
hpd-gpio = <&gpx3 7 0>;
};
codec@11000000 {
......@@ -212,9 +195,7 @@
};
i2s0: i2s@03830000 {
gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>,
<&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>,
<&gpz 6 2 0 0>;
status = "okay";
};
i2s1: i2s@12D60000 {
......
......@@ -16,12 +16,27 @@
model = "Google Snow";
compatible = "google,snow", "samsung,exynos5250";
pinctrl@11400000 {
sd3_clk: sd3-clk {
samsung,pin-drv = <0>;
};
sd3_cmd: sd3-cmd {
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
sd3_bus4: sd3-bus-width4 {
samsung,pin-drv = <0>;
};
};
gpio-keys {
compatible = "gpio-keys";
lid-switch {
label = "Lid";
gpios = <&gpx3 5 0 0x10000 0>;
gpios = <&gpx3 5 1>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
......@@ -35,9 +50,8 @@
*/
dwmmc3@12230000 {
slot@0 {
gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>,
<&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>,
<&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
pinctrl-names = "default";
pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
};
};
......
......@@ -18,6 +18,7 @@
*/
/include/ "skeleton.dtsi"
/include/ "exynos5250-pinctrl.dtsi"
/ {
compatible = "samsung,exynos5250";
......@@ -44,6 +45,10 @@
i2c6 = &i2c_6;
i2c7 = &i2c_7;
i2c8 = &i2c_8;
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
pinctrl3 = &pinctrl_3;
};
pd_gsc: gsc-power-domain@0x10044000 {
......@@ -109,6 +114,36 @@
};
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x11400000 0x1000>;
interrupts = <0 46 0>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <0 32 0>;
};
};
pinctrl_1: pinctrl@13400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x13400000 0x1000>;
interrupts = <0 45 0>;
};
pinctrl_2: pinctrl@10d10000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x10d10000 0x1000>;
interrupts = <0 50 0>;
};
pinctrl_3: pinctrl@03680000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x0368000 0x1000>;
interrupts = <0 47 0>;
};
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x101D0000 0x100>;
......@@ -193,6 +228,8 @@
#size-cells = <0>;
clocks = <&clock 294>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
};
i2c_1: i2c@12C70000 {
......@@ -203,6 +240,8 @@
#size-cells = <0>;
clocks = <&clock 295>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
};
i2c_2: i2c@12C80000 {
......@@ -213,6 +252,8 @@
#size-cells = <0>;
clocks = <&clock 296>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
};
i2c_3: i2c@12C90000 {
......@@ -223,6 +264,8 @@
#size-cells = <0>;
clocks = <&clock 297>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
};
i2c_4: i2c@12CA0000 {
......@@ -233,6 +276,8 @@
#size-cells = <0>;
clocks = <&clock 298>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c4_bus>;
};
i2c_5: i2c@12CB0000 {
......@@ -243,6 +288,8 @@
#size-cells = <0>;
clocks = <&clock 299>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_bus>;
};
i2c_6: i2c@12CC0000 {
......@@ -253,6 +300,8 @@
#size-cells = <0>;
clocks = <&clock 300>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_bus>;
};
i2c_7: i2c@12CD0000 {
......@@ -263,6 +312,8 @@
#size-cells = <0>;
clocks = <&clock 301>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c7_bus>;
};
i2c_8: i2c@12CE0000 {
......@@ -295,6 +346,8 @@
#size-cells = <0>;
clocks = <&clock 304>, <&clock 154>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
};
spi_1: spi@12d30000 {
......@@ -308,6 +361,8 @@
#size-cells = <0>;
clocks = <&clock 305>, <&clock 155>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
};
spi_2: spi@12d40000 {
......@@ -321,6 +376,8 @@
#size-cells = <0>;
clocks = <&clock 306>, <&clock 156>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
};
dwmmc_0: dwmmc0@12200000 {
......@@ -374,6 +431,8 @@
samsung,supports-rstclr;
samsung,supports-secdai;
samsung,idma-addr = <0x03000000>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
};
i2s1: i2s@12D60000 {
......@@ -382,6 +441,8 @@
dmas = <&pdma1 12
&pdma1 11>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
};
i2s2: i2s@12D70000 {
......@@ -390,6 +451,8 @@
dmas = <&pdma0 12
&pdma0 11>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
};
usb@12110000 {
......@@ -456,254 +519,6 @@
};
};
gpio-controllers {
#address-cells = <1>;
#size-cells = <1>;
gpio-controller;
ranges;
gpa0: gpio-controller@11400000 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400000 0x20>;
#gpio-cells = <4>;
};
gpa1: gpio-controller@11400020 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400020 0x20>;
#gpio-cells = <4>;
};
gpa2: gpio-controller@11400040 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400040 0x20>;
#gpio-cells = <4>;
};
gpb0: gpio-controller@11400060 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400060 0x20>;
#gpio-cells = <4>;
};
gpb1: gpio-controller@11400080 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400080 0x20>;
#gpio-cells = <4>;
};
gpb2: gpio-controller@114000A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000A0 0x20>;
#gpio-cells = <4>;
};
gpb3: gpio-controller@114000C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000C0 0x20>;
#gpio-cells = <4>;
};
gpc0: gpio-controller@114000E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000E0 0x20>;
#gpio-cells = <4>;
};
gpc1: gpio-controller@11400100 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400100 0x20>;
#gpio-cells = <4>;
};
gpc2: gpio-controller@11400120 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400120 0x20>;
#gpio-cells = <4>;
};
gpc3: gpio-controller@11400140 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400140 0x20>;
#gpio-cells = <4>;
};
gpc4: gpio-controller@114002E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114002E0 0x20>;
#gpio-cells = <4>;
};
gpd0: gpio-controller@11400160 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400160 0x20>;
#gpio-cells = <4>;
};
gpd1: gpio-controller@11400180 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400180 0x20>;
#gpio-cells = <4>;
};
gpy0: gpio-controller@114001A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001A0 0x20>;
#gpio-cells = <4>;
};
gpy1: gpio-controller@114001C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001C0 0x20>;
#gpio-cells = <4>;
};
gpy2: gpio-controller@114001E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001E0 0x20>;
#gpio-cells = <4>;
};
gpy3: gpio-controller@11400200 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400200 0x20>;
#gpio-cells = <4>;
};
gpy4: gpio-controller@11400220 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400220 0x20>;
#gpio-cells = <4>;
};
gpy5: gpio-controller@11400240 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400240 0x20>;
#gpio-cells = <4>;
};
gpy6: gpio-controller@11400260 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400260 0x20>;
#gpio-cells = <4>;
};
gpx0: gpio-controller@11400C00 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400C00 0x20>;
#gpio-cells = <4>;
};
gpx1: gpio-controller@11400C20 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400C20 0x20>;
#gpio-cells = <4>;
};
gpx2: gpio-controller@11400C40 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400C40 0x20>;
#gpio-cells = <4>;
};
gpx3: gpio-controller@11400C60 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400C60 0x20>;
#gpio-cells = <4>;
};
gpe0: gpio-controller@13400000 {
compatible = "samsung,exynos4-gpio";
reg = <0x13400000 0x20>;
#gpio-cells = <4>;
};
gpe1: gpio-controller@13400020 {
compatible = "samsung,exynos4-gpio";
reg = <0x13400020 0x20>;
#gpio-cells = <4>;
};
gpf0: gpio-controller@13400040 {
compatible = "samsung,exynos4-gpio";
reg = <0x13400040 0x20>;
#gpio-cells = <4>;
};
gpf1: gpio-controller@13400060 {
compatible = "samsung,exynos4-gpio";
reg = <0x13400060 0x20>;
#gpio-cells = <4>;
};
gpg0: gpio-controller@13400080 {
compatible = "samsung,exynos4-gpio";
reg = <0x13400080 0x20>;
#gpio-cells = <4>;
};
gpg1: gpio-controller@134000A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x134000A0 0x20>;
#gpio-cells = <4>;
};
gpg2: gpio-controller@134000C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x134000C0 0x20>;
#gpio-cells = <4>;
};
gph0: gpio-controller@134000E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x134000E0 0x20>;
#gpio-cells = <4>;
};
gph1: gpio-controller@13400100 {
compatible = "samsung,exynos4-gpio";
reg = <0x13400100 0x20>;
#gpio-cells = <4>;
};
gpv0: gpio-controller@10D10000 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10000 0x20>;
#gpio-cells = <4>;
};
gpv1: gpio-controller@10D10020 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10020 0x20>;
#gpio-cells = <4>;
};
gpv2: gpio-controller@10D10040 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10060 0x20>;
#gpio-cells = <4>;
};
gpv3: gpio-controller@10D10060 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D10080 0x20>;
#gpio-cells = <4>;
};
gpv4: gpio-controller@10D10080 {
compatible = "samsung,exynos4-gpio";
reg = <0x10D100C0 0x20>;
#gpio-cells = <4>;
};
gpz: gpio-controller@03860000 {
compatible = "samsung,exynos4-gpio";
reg = <0x03860000 0x20>;
#gpio-cells = <4>;
};
};
gsc_0: gsc@0x13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册