- 02 1月, 2020 5 次提交
-
-
由 Ming Lei 提交于
commit 79d08f89bb1b5c2c1ff90d9bb95497ab9e8aa7e0 upstream 'bio->bi_iter.bi_size' is 'unsigned int', which at most hold 4G - 1 bytes. Before 07173c3ec276 ("block: enable multipage bvecs"), one bio can include very limited pages, and usually at most 256, so the fs bio size won't be bigger than 1M bytes most of times. Since we support multi-page bvec, in theory one fs bio really can be added > 1M pages, especially in case of hugepage, or big writeback with too many dirty pages. Then there is chance in which .bi_size is overflowed. Fixes this issue by using bio_full() to check if the added segment may overflow .bi_size. Signed-off-by: NHui Zhu <teawaterz@linux.alibaba.com> Cc: Liu Yiding <liuyd.fnst@cn.fujitsu.com> Cc: kernel test robot <rong.a.chen@intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: linux-xfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 07173c3ec276 ("block: enable multipage bvecs") Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMing Lei <ming.lei@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Andreas Gruenbacher 提交于
commit 7a77dad7e3be1280456508841ccdd2a091b1906a upstream In iomap_write_end, we're not holding a page reference anymore when calling the page_done callback, but the callback needs that reference to access the page. To fix that, move the put_page call in __generic_write_end into the callers of __generic_write_end. Then, in iomap_write_end, put the page after calling the page_done callback. Reported-by: NJan Kara <jack@suse.cz> Fixes: 63899c6f ("iomap: add a page_done callback") Signed-off-by: NHui Zhu <teawaterz@linux.alibaba.com> Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Andreas Gruenbacher 提交于
commit 26ddb1f4fd884258eeb8a8d7f2d40b163f00fedd upstream The VFS-internal __generic_write_end helper always returns the value of its @copied argument. This can be confusing, and it isn't very useful anyway, so turn __generic_write_end into a function returning void instead. Signed-off-by: NHui Zhu <teawaterz@linux.alibaba.com> Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Huang Ying 提交于
commit 054f1d1faaed6a7930b77286d607ae45c01d0443 upstream. total_swapcache_pages() may race with swapper_spaces[] allocation and freeing. Previously, this is protected with a swapper_spaces[] specific RCU mechanism. To simplify the logic/code complexity, it is replaced with get/put_swap_device(). The code line number is reduced too. Although not so important, the swapoff() performance improves too because one synchronize_rcu() call during swapoff() is deleted. [ying.huang@intel.com: fix bad swap file entry warning] Link: http://lkml.kernel.org/r/20190531024102.21723-1-ying.huang@intel.com Link: http://lkml.kernel.org/r/20190527082714.12151-1-ying.huang@intel.comSigned-off-by: NHui Zhu <teawaterz@linux.alibaba.com> Signed-off-by: N"Huang, Ying" <ying.huang@intel.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Tested-by: NMike Kravetz <mike.kravetz@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
-
由 Huang Ying 提交于
commit eb085574a7526c4375965c5fbf7e5b0c19cdd336 upstream. [zhuhui] Change SWP_VALID to (1 << 12). [Joseph] call the new __swap_count() in swap_slot_free_notify() When swapin is performed, after getting the swap entry information from the page table, system will swap in the swap entry, without any lock held to prevent the swap device from being swapoff. This may cause the race like below, CPU 1 CPU 2 ----- ----- do_swap_page swapin_readahead __read_swap_cache_async swapoff swapcache_prepare p->swap_map = NULL __swap_duplicate p->swap_map[?] /* !!! NULL pointer access */ Because swapoff is usually done when system shutdown only, the race may not hit many people in practice. But it is still a race need to be fixed. To fix the race, get_swap_device() is added to check whether the specified swap entry is valid in its swap device. If so, it will keep the swap entry valid via preventing the swap device from being swapoff, until put_swap_device() is called. Because swapoff() is very rare code path, to make the normal path runs as fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of reference count is used to implement get/put_swap_device(). >From get_swap_device() to put_swap_device(), RCU reader side is locked, so synchronize_rcu() in swapoff() will wait until put_swap_device() is called. In addition to swap_map, cluster_info, etc. data structure in the struct swap_info_struct, the swap cache radix tree will be freed after swapoff, so this patch fixes the race between swap cache looking up and swapoff too. Races between some other swap cache usages and swapoff are fixed too via calling synchronize_rcu() between clearing PageSwapCache() and freeing swap cache data structure. Another possible method to fix this is to use preempt_off() + stop_machine() to prevent the swap device from being swapoff when its data structure is being accessed. The overhead in hot-path of both methods is similar. The advantages of RCU based method are, 1. stop_machine() may disturb the normal execution code path on other CPUs. 2. File cache uses RCU to protect its radix tree. If the similar mechanism is used for swap cache too, it is easier to share code between them. 3. RCU is used to protect swap cache in total_swapcache_pages() and exit_swap_address_space() already. The two mechanisms can be merged to simplify the logic. Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com Fixes: 235b6217 ("mm/swap: add cluster lock") Signed-off-by: NHui Zhu <teawaterz@linux.alibaba.com> Signed-off-by: N"Huang, Ying" <ying.huang@intel.com> Reviewed-by: NAndrea Parri <andrea.parri@amarulasolutions.com> Not-nacked-by: NHugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
- 27 12月, 2019 35 次提交
-
-
由 Yang Shi 提交于
commit 8fd2e0b505d124bbb046ab15de0ff6f8d4babf56 upstream. Change SWP_FS to SWP_FILE. Swap readahead would read in a few pages regardless if the underlying device is busy or not. It may incur long waiting time if the device is congested, and it may also exacerbate the congestion. Use inode_read_congested() to check if the underlying device is busy or not like what file page readahead does. Get inode from swap_info_struct. Although we can add inode information in swap_address_space (address_space->host), it may lead some unexpected side effect, i.e. it may break mapping_cap_account_dirty(). Using inode from swap_info_struct seems simple and good enough. Just does the check in vma_cluster_readahead() since swap_vma_readahead() is just used for non-rotational device which much less likely has congestion than traditional HDD. Although swap slots may be consecutive on swap partition, it still may be fragmented on swap file. This check would help to reduce excessive stall for such case. The test with page_fault1 of will-it-scale (sometimes tracing may just show runtest.py that is the wrapper script of page_fault1), which basically launches NR_CPU threads to generate 128MB anonymous pages for each thread, on my virtual machine with congested HDD shows long tail latency is reduced significantly. Without the patch page_fault1_thr-1490 [023] 129.311706: funcgraph_entry: #57377.796 us | do_swap_page(); page_fault1_thr-1490 [023] 129.369103: funcgraph_entry: 5.642us | do_swap_page(); page_fault1_thr-1490 [023] 129.369119: funcgraph_entry: #1289.592 us | do_swap_page(); page_fault1_thr-1490 [023] 129.370411: funcgraph_entry: 4.957us | do_swap_page(); page_fault1_thr-1490 [023] 129.370419: funcgraph_entry: 1.940us | do_swap_page(); page_fault1_thr-1490 [023] 129.378847: funcgraph_entry: #1411.385 us | do_swap_page(); page_fault1_thr-1490 [023] 129.380262: funcgraph_entry: 3.916us | do_swap_page(); page_fault1_thr-1490 [023] 129.380275: funcgraph_entry: #4287.751 us | do_swap_page(); With the patch runtest.py-1417 [020] 301.925911: funcgraph_entry: #9870.146 us | do_swap_page(); runtest.py-1417 [020] 301.935785: funcgraph_entry: 9.802us | do_swap_page(); runtest.py-1417 [020] 301.935799: funcgraph_entry: 3.551us | do_swap_page(); runtest.py-1417 [020] 301.935806: funcgraph_entry: 2.142us | do_swap_page(); runtest.py-1417 [020] 301.935853: funcgraph_entry: 6.938us | do_swap_page(); runtest.py-1417 [020] 301.935864: funcgraph_entry: 3.765us | do_swap_page(); runtest.py-1417 [020] 301.935871: funcgraph_entry: 3.600us | do_swap_page(); runtest.py-1417 [020] 301.935878: funcgraph_entry: 7.202us | do_swap_page(); [akpm@linux-foundation.org: code cleanup] [yang.shi@linux.alibaba.com: add comment] Link: http://lkml.kernel.org/r/bbc7bda7-62d0-df1a-23ef-d369e865bdca@linux.alibaba.com Link: http://lkml.kernel.org/r/1546543673-108536-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by: NHui Zhu <teawaterz@linux.alibaba.com> Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com> Acked-by: NTim Chen <tim.c.chen@intel.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Hugh Dickins <hughd@google.com Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com> Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
commit 8b37bc277fb459fa100808880a9d4e0641fff444 upstream. There is a bug that checking the same active_list over and over again in iocg_activate(). The intention of the code was checking whether all the ancestors and self have already been activated. So fix it. Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: NJens Axboe <axboe@kernel.dk> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Xiaoguang Wang 提交于
commit 53cf978457325d8fb2cdecd7981b31a8229e446e upstream. This issue was found when I tried to put checkpoint work in a separate thread, the deadlock below happened: Thread1 | Thread2 __jbd2_log_wait_for_space | jbd2_log_do_checkpoint (hold j_checkpoint_mutex)| if (jh->b_transaction != NULL) | ... | jbd2_log_start_commit(journal, tid); |jbd2_update_log_tail | will lock j_checkpoint_mutex, | but will be blocked here. | jbd2_log_wait_commit(journal, tid); | wait_event(journal->j_wait_done_commit, | !tid_gt(tid, journal->j_commit_sequence)); | ... |wake_up(j_wait_done_commit) } | then deadlock occurs, Thread1 will never be waken up. To fix this issue, drop j_checkpoint_mutex in jbd2_log_do_checkpoint() when we are going to wait for transaction commit. Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Dan Carpenter 提交于
commit 41591a51f00d2dc7bb9dc6e9bedf56c5cf6f2392 upstream. This code causes a static analysis warning: block/blk-iocost.c:2113 ioc_weight_write() error: double lock 'irq' We disable IRQs in blkg_conf_prep() and re-enable them in blkg_conf_finish(). IRQ disable/enable should not be nested because that means the IRQs will be enabled at the first unlock instead of the second one. Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
Function ioc_rqos_throttle() may called inside queue_lock. We should unlock the queue_lock before entering sleep. Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 9d179b865449b351ad5cb76dbea480c9170d4a27 upstream. blkcg_activate_policy() has the following bugs. * cf09a8ee19ad ("blkcg: pass @q and @blkcg into blkcg_pol_alloc_pd_fn()") added @blkcg to ->pd_alloc_fn(); however, blkcg_activate_policy() ends up using pd's allocated for the root blkcg for all preallocations, so ->pd_init_fn() for non-root blkcgs can be passed in pd's which are allocated for the root blkcg. For blk-iocost, this means that ->pd_init_fn() can write beyond the end of the allocated object as it determines the length of the flex array at the end based on the blkcg's nesting level. * Each pd is initialized as they get allocated. If alloc fails, the policy will get freed with pd's initialized on it. * After the above partial failure, the partial pds are not freed. This patch fixes all the above issues by * Restructuring blkcg_activate_policy() so that alloc and init passes are separate. Init takes place only after all allocs succeeded and on failure all allocated pds are freed. * Unifying and fixing the cleanup of the remaining pd_prealloc. Signed-off-by: NTejun Heo <tj@kernel.org> Fixes: cf09a8ee19ad ("blkcg: pass @q and @blkcg into blkcg_pol_alloc_pd_fn()") Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 71c814077de60b2e7415dac6f5c4e98f59d521fd upstream. When blkcg_activate_policy() is creating blkg_policy_data for existing blkgs, it did in the wrong order - descendants first. Fix it. None of the existing controllers seem affected by this. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
When the QoS targets are met and nothing is being throttled, there's no way to tell how saturated the underlying device is - it could be almost entirely idle, at the cusp of saturation or anywhere inbetween. Given that there's no information, it's best to keep vrate as-is in this state. Before 7cd806a9a953 ("iocost: improve nr_lagging handling"), this was the case - if the device isn't missing QoS targets and nothing is being throttled, busy_level was reset to zero. While fixing nr_lagging handling, 7cd806a9a953 ("iocost: improve nr_lagging handling") broke this. Now, while the device is hitting QoS targets and nothing is being throttled, vrate keeps getting adjusted according to the existing busy_level. This led to vrate keeping climing till it hits max when there's an IO issuer with limited request concurrency if the vrate started low. vrate starts getting adjusted upwards until the issuer can issue IOs w/o being throttled. From then on, QoS targets keeps getting met and nothing on the system needs throttling and vrate keeps getting increased due to the existing busy_level. This patch makes the following changes to the busy_level logic. * Reset busy_level if nr_shortages is zero to avoid the above scenario. * Make non-zero nr_lagging block lowering nr_level but still clear positive busy_level if there's clear non-saturation signal - QoS targets are met and nr_shortages is non-zero. nr_lagging's role is preventing adjusting vrate upwards while there are long-running commands and it shouldn't keep busy_level positive while there's clear non-saturation signal. * Restructure code for clarity and add comments. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NAndy Newell <newella@fb.com> Fixes: 7cd806a9a953 ("iocost: improve nr_lagging handling") Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 7afcccafa59fb63b58f863a6c5e603a34625955b upstream. The default hard disk param sets latency targets at 50ms. As the default target percentiles are zero, these don't directly regulate vrate; however, they're still used to calculate the period length - 100ms in this case. This is excessively low. A SATA drive with QD32 saturated with random IOs can easily reach avg completion latency of several hundred msecs. A period duration which is substantially lower than avg completion latency can lead to wildly fluctuating vrate. Let's bump up the default latency targets to 250ms so that the period duration is sufficiently long. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 7cd806a9a953f234b9865c30028f47fd738ce375 upstream. Some IOs may span multiple periods. As latencies are collected on completion, the inbetween periods won't register them and may incorrectly decide to increase vrate. nr_lagging tracks these IOs to avoid those situations. Currently, whenever there are IOs which are spanning from the previous period, busy_level is reset to 0 if negative thus suppressing vrate increase. This has the following two problems. * When latency target percentiles aren't set, vrate adjustment should only be governed by queue depth depletion; however, the current code keeps nr_lagging active which pulls in latency results and can keep down vrate unexpectedly. * When lagging condition is detected, it resets the entire negative busy_level. This turned out to be way too aggressive on some devices which sometimes experience extended latencies on a small subset of commands. In addition, a lagging IO will be accounted as latency target miss on completion anyway and resetting busy_level amplifies its impact unnecessarily. This patch fixes the above two problems by disabling nr_lagging counting when latency target percentiles aren't set and blocking vrate increases when there are lagging IOs while leaving busy_level as-is. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 25d41e4aadb0788b4fae8a8fca90f437b9ebd727 upstream. vrate_adj tracepoint traces vrate changes; however, it does so only when busy_level is non-zero. busy_level turning to zero can sometimes be as interesting an event. This patch also enables vrate_adj tracepoint on other vrate related events - busy_level changes and non-zero nr_lagging. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
Bios are not associated with blkg before entering iocost controller. do it in ioc_rqos_throttle() as well as ioc_rqos_merge(). Considering that there are so many chances to create blkg before ioc_rqos_merge(), we just lookup the blkg here and if blkg are not exist, just return rather than create it. Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Jiufei Xue 提交于
To support cgroup v1. Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 7c1ee704a1d6450f92372d57f5b76a458b51c1d4 upstream. Report debt and rename del_ms row to delay for consistency. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit b06f2d35c6b14d956f19eeabe1f257caeb66e38e upstream. When outputting json: * Don't truncate numbers. * Report address of iocg to ease drilling down further. When outputting table: * Use math.ceil() for delay_ms so that small delays don't read as 0. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit e742bd5cb55ec0be48c5e7b356393a708e7f73c9 upstream. Json has limited accuracy for numbers and can silently truncate 64bit values, which can be extremely confusing. Let's consistently use string encapsulated values for json output. While at it, convert an unnecesary f-string to str(). Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit e1518f63f246831af222758ead022cd40e79fab8 upstream. Merges have the same problem that forced-bios had which is fixed by the previous patch. The cost of a merge is calculated at the time of issue and force-advances vtime into the future. Until global vtime catches up, how the cgroup's hweight changes in the meantime doesn't matter and it often leads to situations where the cost is calculated at one hweight and paid at a very different one. See the previous patch for more details. Fix it by never advancing vtime into the future for merges. If budget is available, vtime is advanced. Otherwise, the cost is charged as debt. This brings merge cost handling in line with issue cost handling in ioc_rqos_throttle(). Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 36a524814ff3e5d5385f42d30152fe8c5e1fd2c1 upstream. Currently, when a bio needs to be force-charged and there isn't enough budget, vtime is simply pushed into the future. This means that the cost of the whole bio is scaled using the current hweight and then charged immediately. Until the global vtime advances beyond this future vtime, the cgroup won't be allowed to issue normal IOs. This is incorrect and can lead to, for example, exploding vrate or extended stalls if vrate range is constrained. Consider the following scenario. 1. A cgroup with a very low hweight runs out of budget. 2. A storm of swap-out happens on it. All of them are scaled according to the current low hweight and charged to vtime pushing it to a far future. 3. All other cgroups go idle and now the above cgroup has access to the whole device. However, because vtime is already wound using the past low hweight, what its current hweight is doesn't matter until global vtime catches up to the local vtime. 4. As a result, either vrate gets ramped up extremely or the IOs stall while the underlying device is idle. This is because the hweight the overage is calculated at is different from the hweight that it's being paid at. Fix it by remembering the overage in absoulte vtime and continuously paying with the actual budget according to the current hweight at each period. Note that non-forced bios which wait already remembers the cost in absolute vtime. This brings forced-bio accounting in line. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit e036c4cabaa8d24375262ced3a191819a8077b74 upstream. ioc_pd_free() first cancels the hrtimers and then deactivates the iocg. However, the iocg timer can run inbetween and reschedule the hrtimers which will end up running after the iocg is freed leading to crashes like the following. general protection fault: 0000 [#1] SMP ... RIP: 0010:iocg_kick_delay+0xbe/0x1b0 RSP: 0018:ffffc90003598ea0 EFLAGS: 00010046 RAX: 1cee00fd69512b54 RBX: ffff8881bba48400 RCX: 00000000000003e8 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881bba48400 RBP: 0000000000004e20 R08: 0000000000000002 R09: 00000000000003e8 R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90003598ef0 R13: 00979f3810ad461f R14: ffff8881bba4b400 R15: 25439f950d26e1d1 FS: 0000000000000000(0000) GS:ffff88885f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f64328c7e40 CR3: 0000000002409005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> iocg_delay_timer_fn+0x3d/0x60 __hrtimer_run_queues+0xfe/0x270 hrtimer_interrupt+0xf4/0x210 smp_apic_timer_interrupt+0x5e/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> Fix it by canceling hrtimers after deactivating the iocg. Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Reported-by: NDave Jones <davej@codemonkey.org.uk> Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit e916ad29d96485e5aa3d3237bfeab1522c713d5e upstream. ioc_cpd_alloc() forgot to check NULL return from kzalloc(). Add it. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 3532e7227243beb0b782266dc05c40b6184ad051 upstream. blk_iocost_init() forgot to free its percpu stat on the error path. Fix it. Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Reported-by: NHillf Danton <hdanton@sina.com> Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Stephen Rothwell 提交于
commit 8d1c1560c383004e09c6a39498094671cc664e6b upstream. Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 8504dea783b044cab620acbaef87b86ee84646fe upstream. Add a script which can be used to generate device-specific iocost linear model coefficients. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 6954ff185ee0811cdd2e0f388ff4dd7df17f11af upstream. Instead of mucking with debugfs and ->pd_stat(), add drgn based monitoring script. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 7caa47151ab2e644dd221f741ec7578d9532c9a3 upstream. This patchset implements IO cost model based work-conserving proportional controller. While io.latency provides the capability to comprehensively prioritize and protect IOs depending on the cgroups, its protection is binary - the lowest latency target cgroup which is suffering is protected at the cost of all others. In many use cases including stacking multiple workload containers in a single system, it's necessary to distribute IO capacity with better granularity. One challenge of controlling IO resources is the lack of trivially observable cost metric. The most common metrics - bandwidth and iops - can be off by orders of magnitude depending on the device type and IO pattern. However, the cost isn't a complete mystery. Given several key attributes, we can make fairly reliable predictions on how expensive a given stream of IOs would be, at least compared to other IO patterns. The function which determines the cost of a given IO is the IO cost model for the device. This controller distributes IO capacity based on the costs estimated by such model. The more accurate the cost model the better but the controller adapts based on IO completion latency and as long as the relative costs across differents IO patterns are consistent and sensible, it'll adapt to the actual performance of the device. Currently, the only implemented cost model is a simple linear one with a few sets of default parameters for different classes of device. This covers most common devices reasonably well. All the infrastructure to tune and add different cost models is already in place and a later patch will also allow using bpf progs for cost models. Please see the top comment in blk-iocost.c and documentation for more details. v2: Rebased on top of RQ_ALLOC_TIME changes and folded in Rik's fix for a divide-by-zero bug in current_hweight() triggered by zero inuse_sum. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Andy Newell <newella@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: NJens Axboe <axboe@kernel.dk> [Joseph: fix confilcts with ioc_rqos_throttle()] Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 38cf3a687f5827fcfc81cbc433ef5822693a49c1 upstream. a5e112e6424a ("cgroup: add cgroup_parse_float()") accidentally added cgroup_parse_float() inside CONFIG_SYSFS block. Move it outside so that it doesn't cause failures on !CONFIG_SYSFS builds. Signed-off-by: NTejun Heo <tj@kernel.org> Fixes: a5e112e6424a ("cgroup: add cgroup_parse_float()") Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit a5e112e6424adb77d953eac20e6936b952fd6b32 upstream. cgroup already uses floating point for percent[ile] numbers and there are several controllers which want to take them as input. Add a generic parse helper to handle inputs. Update the interface convention documentation about the use of percentage numbers. While at it, also clarify the default time unit. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 6f816b4b746c2241540e537682d30d8e9997d674 upstream. There are currently two start time timestamps - start_time_ns and io_start_time_ns. The former marks the request allocation and and the second issue-to-device time. The planned io.weight controller needs to measure the total time bios take to execute after it leaves rq_qos including the time spent waiting for request to become available, which can easily dominate on saturated devices. This patch adds request->alloc_time_ns which records when the request allocation attempt started. As it isn't used for the usual stats, make it optional behind CONFIG_BLK_RQ_ALLOC_TIME and QUEUE_FLAG_RQ_ALLOC_TIME so that it can be compiled out when there are no users and it's active only on queues which need it even when compiled in. v2: s/pre_start_time/alloc_time/ and add CONFIG_BLK_RQ_ALLOC_TIME gating as suggested by Jens. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit beab17fc2a507e85dd18b3cef83820c5770c5f34 upstream. io.weight is gonna be another rq_qos cgroup mechanism. Let's rename RQ_QOS_CGROUP which is being used by io.latency to RQ_QOS_LATENCY in preparation. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> [Jiufei: remove unused function rq_qos_id_to_name()] Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 9677a3e01f838622d2efc9a3ccb97090a2c3156a upstream. wbt already gets queue depth changed notification through wbt_set_queue_depth(). Generalize it into rq_qos_ops->queue_depth_changed() so that other rq_qos policies can easily hook into the events too. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit d3e65ffff61c329fb2d0bf15736c440c2d0cfc97 upstream. Add a merge hook for rq_qos. This will be used by io.weight. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 015d254cb02b6d8eec4b3366274bf4672f9e0b64 upstream. Separate out blkcg_conf_get_disk() so that it can be used by blkcg policy interface file input parsers before the policy is actually enabled. This doesn't introduce any functional changes. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit 86a5bba5c252e90d264c7460e29a0b9e633777e7 upstream. For policies which can do enough initialization from ->cpd_alloc_fn(), make ->cpd_init_fn() optional. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Tejun Heo 提交于
commit cf09a8ee19ad1f78b4e18cdde9f2a61133efacf5 upstream. Instead of @node, pass in @q and @blkcg so that the alloc function has more context. This doesn't cause any behavior change and will be used by io.weight implementation. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@kernel.dk> [Joseph: resolve conflicts for cfq] Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
由 Shannon Zhao 提交于
Commit 6f1e39b2(eci: drivers/virtio: add vring_force_dma_api boot param) only supports using vring_force_dma_api when virtio_ring built into kernel not as a module. But by default, virtio_ring is compiled as a module, this patch adds support for that case. So users can specify virtio_ring.vring_force_dma_api=1/0 in kernel booting paramter to turn on/off this feature. Signed-off-by: NShannon Zhao <shannon.zhao@linux.alibaba.com> Reviewed-by: NZou Cao <zou.cao@linux.alibaba.com>
-