- 02 2月, 2006 8 次提交
-
-
由 Lucas Correia Villa Real 提交于
Patch from Lucas Correia Villa Real Oops, sorry for the typo on name_s3c2400, a new patch is attached. About GSTATUS1, S3C2400 doesn't have that register, so it's not safe to use that memory address to identify its CPU. Signed-off-by: NLucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lucas Correia Villa Real 提交于
Patch from Lucas Correia Villa Real This patch adds support to GPIO on the S3C2400, which is going to be used by the GP32 machine and the SMDK2400 development board. Signed-off-by: NLucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russ Dill 提交于
Patch from Russ Dill The oprofile init code was broken in commit c6b9da. The new logic will always return -ENODEV. This fixes oprofile_arch_init to return 0 on success, and return the return value of spec->init() if applicable. Signed-off-by: NRuss Dill <Russ.Dill@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre Doing so adds a much larger cost to the loop than the cost implied by simply invalidating the whole BTB at once. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre The mini I-cache issue is valid only for kernel space since debuggers would not fly if they used user space addresses for their stubs. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie ip_fast_csum() accesses memory via a pointer (iph) within an asm function. To prevent memory corruption when the function is inlined, it needs "memory" on the clobber list. This fixes ip checksum errors reported by a Zaurus user. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie The turbo flag is in bit 0 of the CLKCFG register, not bit 1. This patch corrects this so get_clk_frequency_khz returns a correct value. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas AACI reports TX FIFO full after the first write to it if the AC97 is not enabled. This patch enables the AC97 probing before the check for the TX FIFO size. The patch also adds a warning if the TX FIFO size is not multiple of 16. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 01 2月, 2006 32 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
-
由 Chris Wright 提交于
Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Andi Kleen 提交于
Handle more bogus MCFG entries Some Asus P4 boards seem to have broken MCFG tables with only a single entry for busses 0-0. Special case these and assume they mean all busses can be accessed. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Arthur Othieno 提交于
Richard Knutsson <ricknu-0@student.ltu.se> did the original pci_module_init() cleanups: http://marc.theaimsgroup.com/?l=linux-kernel&m=113330872125068&w=2 http://marc.theaimsgroup.com/?l=linux-kernel&m=113330888507321&w=2 Greg, on it's way upstream, pci_module_init() return sneaked back in for cyblafb? http://marc.theaimsgroup.com/?l=linux-pci&m=113652969209562&w=2 http://marc.theaimsgroup.com/?l=linux-pci&m=113683930220421&w=2 Remove for good. Signed-off-by: NArthur Othieno <apgo@patchbomb.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Error checking is scattered through various layers of the dlpar code, leading to a somewhat opaque code structure. This patch consolidates error checking in one routine, simplifying the code a tad. There's also some whitespace cleanup here too. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Minor cleanup. Move structure initializer to bottom of file, this allows elimination of eyeball-strain-inducing forward declarations. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Minor cleanup. Add the prefix rpaphp_* to several generic-sounding routines. Remove rpaphp_remove_slot(), which is a one-liner. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Remove general baroqueness. The function rpaphp_enable_pci_slot() has a fairly simple logic structure, once all of the debug printk's are removed. Its called from only one place, and that place also has a very simple structure once he printk's are removed. Merge the two together. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Remove general baroqueness. The function rpaphp_unconfig_pci_adapter() is really just three lines of code, once all the dbg printks are removed. And its called in only one place. So replace the call by the thre lines. Also, provide proper semaphore locking in the affected function disable_slot() Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
The function rpaphp_eeh_remove_bus_device() is a dupe of eeh_remove_bus_device(). Remove it. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
Remove general baroqueness. The function rpaphp_config_pci_adapter() is really just one line of code, once all the dbg printks are removed. And its called in only one place. So replace the call by the one line. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
The function rpaphp_fixup_new_pci_devices() has been migrated to pcibios_fixup_new_pci_devices() in arch/powerpc/platforms/pseries/pci_dlpar.c This patch removes the old version. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas@austin.ibm.com 提交于
The function rpaphp_find_pci_bus() has been migrated to pcibios_find_pci_bus() in arch/powerpc/platforms/pseries/pci_dlpar.c This patch removes the old version. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Keck, David 提交于
This patch fixes the AMD POGO errata on the hotplug controller where the platform will lock up or reboot if PERR/SERR generation is enabled and a slot is sent an enable command. This fix disables PERR/SERR generation before a slot is sent the enable command by first saving related registers, turning off SERR/PERR generation, enabling the slot, then restoring the registers. Signed-off-by: NDavid Keck <david.keck@amd.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas 提交于
Removing and then adding a PCI slot to a running partition results in a kernel panic. The current code attempts to add iospace for an entire root bus, which is inappropriate, and silently fails. When a pci device tries to use the iospace, a page fault is taken, as the iospace had not been mapped, and of course the page fault cannot be resolved. This only occurs for PCI adapters using pio, which may be why it hadn't been seen earlier (this seems to have been broken for a while). This patch has survived testing of dozens of slot add and removes. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Acked-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 linas 提交于
The RPAPHP hoplug driver will not build as a module, because it calls on pci_claim_resource(), which is not exported. This exports the symbol. Problem reported by Olaf Hering <olh@suse.de> A grep indicates that building drivers/parisc/lba_pci.c would have trouble building as a module for the same reason. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Grant Coady 提交于
pci_ids.h: remove duplicates. Compile tested allmodconfig. Signed-off-by: NGrant Coady <gcoady@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark Rustad 提交于
Somewhere between 2.6.14 and 2.6.15-rc3, some PCI ids were apparently removed. The ecc.c module, which is not a part of the kernel.org tree, but included in some distributions, fails to compile. Signed-off-by: NMark Rustad <mrustad@mac.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pavel Machek 提交于
Remove reference to pcihpfs that no longer exists. Signed-off-by: NPavel Machek <pavel@suse.cz>
-
由 Pavel Machek 提交于
Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Grant Grundler 提交于
I missed this usage in drivers/pci/msi.h: #ifdef CONFIG_SMP #define set_msi_irq_affinity set_msi_affinity #else #define set_msi_irq_affinity NULL #endif set_msi_affinity() is declared and exclusively used in msi.c. Here's a better way so (hopefully) history doesn't repeat itself. Signed-off-by: NGrant Grundler <iod00d@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
This patch #if 0's the unused global function pci_find_ext_capability(). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jason Gaston 提交于
This patch adds the Intel ICH8 DID's to the irq.c and pci_ids.h files. Signed-off-by: NJason Gaston <Jason.d.gaston@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Richard Knutsson 提交于
Scheduled the removal of pci_module_init. Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
PCI_LEGACY_PROC is deprecated since 2.5.53 in favor of lspci(8). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David S. Miller 提交于
It was copy&pasted from tcp_v6_send_synack() which has a DST leak recently fixed by Eric W. Biederman. So dccp_v6_send_response() needs the same fix too. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-