提交 078a9b03 编写于 作者: L Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/bnx2-2.6

此差异已折叠。
/* bnx2.h: Broadcom NX2 network driver.
*
* Copyright (c) 2004, 2005 Broadcom Corporation
* Copyright (c) 2004, 2005, 2006 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -277,19 +277,7 @@ struct statistics_block {
* l2_fhdr definition
*/
struct l2_fhdr {
#if defined(__BIG_ENDIAN)
u16 l2_fhdr_errors;
u16 l2_fhdr_status;
#elif defined(__LITTLE_ENDIAN)
u16 l2_fhdr_status;
u16 l2_fhdr_errors;
#endif
#define L2_FHDR_ERRORS_BAD_CRC (1<<1)
#define L2_FHDR_ERRORS_PHY_DECODE (1<<2)
#define L2_FHDR_ERRORS_ALIGNMENT (1<<3)
#define L2_FHDR_ERRORS_TOO_SHORT (1<<4)
#define L2_FHDR_ERRORS_GIANT_FRAME (1<<5)
u32 l2_fhdr_status;
#define L2_FHDR_STATUS_RULE_CLASS (0x7<<0)
#define L2_FHDR_STATUS_RULE_P2 (1<<3)
#define L2_FHDR_STATUS_RULE_P3 (1<<4)
......@@ -301,6 +289,14 @@ struct l2_fhdr {
#define L2_FHDR_STATUS_TCP_SEGMENT (1<<14)
#define L2_FHDR_STATUS_UDP_DATAGRAM (1<<15)
#define L2_FHDR_ERRORS_BAD_CRC (1<<17)
#define L2_FHDR_ERRORS_PHY_DECODE (1<<18)
#define L2_FHDR_ERRORS_ALIGNMENT (1<<19)
#define L2_FHDR_ERRORS_TOO_SHORT (1<<20)
#define L2_FHDR_ERRORS_GIANT_FRAME (1<<21)
#define L2_FHDR_ERRORS_TCP_XSUM (1<<28)
#define L2_FHDR_ERRORS_UDP_XSUM (1<<31)
u32 l2_fhdr_hash;
#if defined(__BIG_ENDIAN)
u16 l2_fhdr_pkt_len;
......@@ -3956,6 +3952,7 @@ struct bnx2 {
#define NO_WOL_FLAG 8
#define USING_DAC_FLAG 0x10
#define USING_MSI_FLAG 0x20
#define ASF_ENABLE_FLAG 0x40
u32 phy_flags;
#define PHY_SERDES_FLAG 1
......@@ -3986,6 +3983,7 @@ struct bnx2 {
#define CHIP_ID_5706_A2 0x57060020
#define CHIP_ID_5708_A0 0x57080000
#define CHIP_ID_5708_B0 0x57081000
#define CHIP_ID_5708_B1 0x57081010
#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf)
......@@ -3998,7 +3996,7 @@ struct bnx2 {
u16 bus_speed_mhz;
u8 wol;
u8 fw_timed_out;
u8 pad;
u16 fw_wr_seq;
u16 fw_drv_pulse_wr_seq;
......@@ -4074,6 +4072,7 @@ struct bnx2 {
struct net_device_stats net_stats;
struct flash_spec *flash_info;
u32 flash_size;
};
static u32 bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset);
......@@ -4172,7 +4171,7 @@ struct fw_info {
* the firmware has timed out, the driver will assume there is no firmware
* running and there won't be any firmware-driver synchronization during a
* driver reset. */
#define FW_ACK_TIME_OUT_MS 50
#define FW_ACK_TIME_OUT_MS 100
#define BNX2_DRV_RESET_SIGNATURE 0x00000000
......@@ -4275,6 +4274,9 @@ struct fw_info {
#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY1 0x100
#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY2 0x200
#define BNX2_SHARED_HW_CFG_CONFIG2 0x00000040
#define BNX2_SHARED_HW_CFG2_NVM_SIZE_MASK 0x00fff000
#define BNX2_DEV_INFO_BC_REV 0x0000004c
#define BNX2_PORT_HW_CFG_MAC_UPPER 0x00000050
......
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册