1. 05 1月, 2017 1 次提交
  2. 07 5月, 2016 1 次提交
  3. 01 10月, 2015 1 次提交
  4. 23 9月, 2015 1 次提交
  5. 18 11月, 2014 1 次提交
    • L
      ASoC: Rename snd_soc_dai_driver struct ac97_control field to bus_control · bc263214
      Lars-Peter Clausen 提交于
      Setting the ac97_control field on a CPU DAI tells the ASoC core that this
      DAI in addition to audio data also transports control data to the CODEC.
      This causes the core to suspend the DAI after the CODEC and resume it before
      the CODEC so communication to the CODEC is still possible. This is not
      necessarily something that is specific to AC'97 and can be used by other
      buses with the same requirement. This patch renames the flag from
      ac97_control to bus_control to make this explicit.
      
      While we are at it also change the type from int to bool.
      
      The following semantich patch was used for automatic conversion of the
      drivers:
      // <smpl>
      @@
      identifier drv;
      @@
      struct snd_soc_dai_driver drv = {
      -	.ac97_control
      +	.bus_control
      	=
      -	1
      +	true
      };
      // </smpl>
      Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
      Signed-off-by: NMark Brown <broonie@kernel.org>
      bc263214
  6. 20 10月, 2014 1 次提交
  7. 18 10月, 2013 1 次提交
  8. 15 8月, 2013 1 次提交
  9. 29 6月, 2013 1 次提交
  10. 27 6月, 2013 1 次提交
  11. 27 3月, 2013 1 次提交
  12. 22 3月, 2013 1 次提交
  13. 09 12月, 2012 1 次提交
  14. 26 3月, 2012 1 次提交
    • R
      ARM: pxa: use common IOMEM definition · 23019a73
      Rob Herring 提交于
      pxa was missed in the moving of IOMEM to a common definition, so lots of
      IOMEM redefined warnings were introduced. So remove pxa IOMEM definition
      and fix all the fallout.
      Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: NRob Herring <rob.herring@calxeda.com>
      Cc: Eric Miao <eric.y.miao@gmail.com>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
      Cc: Alessandro Zummo <a.zummo@towertech.it>
      Cc: Jaroslav Kysela <perex@perex.cz>
      Cc: Takashi Iwai <tiwai@suse.de>
      Cc: rtc-linux@googlegroups.com
      Cc: alsa-devel@alsa-project.org
      23019a73
  15. 20 2月, 2012 1 次提交
    • A
      ASoC: Add __devinit annotation for pxa2xx_ac97_probe · a3874196
      Axel Lin 提交于
      This fixes below build warning:
      WARNING: vmlinux.o(.text+0x1e632c): Section mismatch in reference from the function pxa2xx_ac97_probe() to the function .devinit.text:pxa2xx_ac97_hw_probe()
      The function pxa2xx_ac97_probe() references
      the function __devinit pxa2xx_ac97_hw_probe().
      This is often because pxa2xx_ac97_probe lacks a __devinit
      annotation or the annotation of pxa2xx_ac97_hw_probe is wrong.
      
      Also rename pxa_ac97_dai to pxa_ac97_dai_driver to fix below build warning:
      
        LD      sound/soc/pxa/built-in.o
      WARNING: sound/soc/pxa/built-in.o(.data+0x18c): Section mismatch in reference from the variable pxa_ac97_dai to the function .devinit.text:pxa2xx_ac97_probe()
      The variable pxa_ac97_dai references
      the function __devinit pxa2xx_ac97_probe()
      If the reference is valid then annotate the
      variable with __init* or __refdata (see linux/init.h) or name the variable:
      *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
      Signed-off-by: NAxel Lin <axel.lin@gmail.com>
      Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      a3874196
  16. 25 11月, 2011 1 次提交
  17. 23 11月, 2011 1 次提交
    • L
      ASoC: Constify snd_soc_dai_ops structs · 85e7652d
      Lars-Peter Clausen 提交于
      Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure")
      introduced the possibility to have constant DAI ops structures, yet this is
      barley used in both existing drivers and also new drivers being submitted,
      although none of them modifies its DAI ops structure. The later is not
      surprising since existing drivers are often used as templates for new drivers.
      So this patch just constifies all existing snd_soc_dai_ops structs to eliminate
      the issue altogether.
      
      The patch was generated with the following coccinelle semantic patch:
      // <smpl>
      @@
      identifier ops;
      @@
      -struct snd_soc_dai_ops ops =
      +const struct snd_soc_dai_ops ops =
      { ... };
      // </smpl>
      Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
      Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      85e7652d
  18. 20 8月, 2010 1 次提交
  19. 12 8月, 2010 1 次提交
    • L
      ASoC: multi-component - ASoC Multi-Component Support · f0fba2ad
      Liam Girdwood 提交于
      This patch extends the ASoC API to allow sound cards to have more than one
      CODEC and more than one platform DMA controller. This is achieved by dividing
      some current ASoC structures that contain both driver data and device data into
      structures that only either contain device data or driver data. i.e.
      
       struct snd_soc_codec    --->  struct snd_soc_codec (device data)
                                +->  struct snd_soc_codec_driver (driver data)
      
       struct snd_soc_platform --->  struct snd_soc_platform (device data)
                                +->  struct snd_soc_platform_driver (driver data)
      
       struct snd_soc_dai      --->  struct snd_soc_dai (device data)
                                +->  struct snd_soc_dai_driver (driver data)
      
       struct snd_soc_device   --->  deleted
      
      This now allows ASoC to be more tightly aligned with the Linux driver model and
      also means that every ASoC codec, platform and (platform) DAI is a kernel
      device. ASoC component private data is now stored as device private data.
      
      The ASoC sound card struct snd_soc_card has also been updated to store lists
      of it's components rather than a pointer to a codec and platform. The PCM
      runtime struct soc_pcm_runtime now has pointers to all its components.
      
      This patch adds DAPM support for ASoC multi-component and removes struct
      snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec
      or runtime PCM level basis rather than using snd_soc_socdev.
      
      Other notable multi-component changes:-
      
       * Stream operations now de-reference less structures.
       * close_delayed work() now runs on a DAI basis rather than looping all DAIs
         in a card.
       * PM suspend()/resume() operations can now handle N CODECs and Platforms
         per sound card.
       * Added soc_bind_dai_link() to bind the component devices to the sound card.
       * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove
         DAI link components.
       * sysfs entries can now be registered per component per card.
       * snd_soc_new_pcms() functionailty rolled into dai_link_probe().
       * snd_soc_register_codec() now does all the codec list and mutex init.
      
      This patch changes the probe() and remove() of the CODEC drivers as follows:-
      
       o Make CODEC driver a platform driver
       o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core.
       o Removed all static codec pointers (drivers now support > 1 codec dev)
       o snd_soc_register_pcms() now done by core.
       o snd_soc_register_dai() folded into snd_soc_register_codec().
      
      CS4270 portions:
      Acked-by: NTimur Tabi <timur@freescale.com>
      
      Some TLV320aic23 and Cirrus platform fixes.
      Signed-off-by: NRyan Mallon <ryan@bluewatersys.com>
      
      TI CODEC and OMAP fixes
      Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com>
      Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
      Signed-off-by: NJarkko Nikula <jhnikula@gmail.com>
      
      Samsung platform and misc fixes :-
      Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
      Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
      Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
      Reviewed-by: NJassi Brar <jassi.brar@samsung.com>
      Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com>
      
      MPC8610 and PPC fixes.
      Signed-off-by: NTimur Tabi <timur@freescale.com>
      
      i.MX fixes and some core fixes.
      Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
      
      J4740 platform fixes:-
      Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
      
      CC: Tony Lindgren <tony@atomide.com>
      CC: Nicolas Ferre <nicolas.ferre@atmel.com>
      CC: Kevin Hilman <khilman@deeprootsystems.com>
      CC: Sascha Hauer <s.hauer@pengutronix.de>
      CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
      CC: Kuninori Morimoto <morimoto.kuninori@renesas.com>
      CC: Daniel Gloeckner <dg@emlix.com>
      CC: Manuel Lauss <mano@roarinelk.homelinux.net>
      CC: Mike Frysinger <vapier.adi@gmail.com>
      CC: Arnaud Patard <apatard@mandriva.com>
      CC: Wan ZongShun <mcuos.com@gmail.com>
      Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
      f0fba2ad
  20. 06 4月, 2010 1 次提交
  21. 20 3月, 2010 1 次提交
  22. 24 8月, 2009 1 次提交
  23. 14 8月, 2009 1 次提交
  24. 16 3月, 2009 1 次提交
  25. 10 3月, 2009 1 次提交
  26. 09 3月, 2009 1 次提交
    • E
      [ARM] pxa: move DMA registers definitions into <mach/dma.h> · 7ebc8d56
      Eric Miao 提交于
      1. Driver code where pxa_request_dma() is called will most likely
         reference DMA registers as well,  and it is really unnecessary
         to include pxa-regs.h just for this. Move the definitions into
         <mach/dma.h> and make relevant drivers include it instead of
         <mach/pxa-regs.h>.
      
      2. Introduce DMAC_REGS_VIRT as the virtual address base for these
         DMA registers. This allows later processors to re-use the same
         IP while registers may start at different I/O address.
      Signed-off-by: NEric Miao <eric.miao@marvell.com>
      7ebc8d56
  27. 05 3月, 2009 1 次提交
  28. 10 12月, 2008 1 次提交
  29. 09 12月, 2008 1 次提交
    • M
      ASoC: Register platform DAIs · 3f4b783c
      Mark Brown 提交于
      Register all platform DAIs with the core.  In line with current behaviour
      this is done at module probe time rather than when the devices are probed
      (since currently that only happens as the entire ASoC card is registered
      except for those drivers that currently implement some kind of hotplug).
      Since the core currently ignores DAI registration this has no practical
      effect.
      Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      3f4b783c
  30. 04 12月, 2008 1 次提交
  31. 02 12月, 2008 1 次提交
  32. 25 11月, 2008 1 次提交
    • M
      ASoC: Remove DAI type information · 3ba9e10a
      Mark Brown 提交于
      DAI type information is only ever used within ASoC in order to special
      case AC97 and for diagnostic purposes. Since modern CPUs and codecs
      support multi function DAIs which can be configured for several modes
      it is more trouble than it's worth to maintain anything other than a
      flag identifying AC97 DAIs so remove the type field and replace it with
      an ac97_control flag.
      Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      3ba9e10a
  33. 21 11月, 2008 1 次提交
    • M
      ASoC: Merge snd_soc_ops into snd_soc_dai_ops · dee89c4d
      Mark Brown 提交于
      Liam Girdwood's ASoC v2 work avoids having two different ops structures
      for DAIs by merging the members of struct snd_soc_ops into struct
      snd_soc_dai_ops, allowing per DAI configuration for everything.
      Backport this change.
      
      This paves the way for future work allowing any combination of DAIs to
      be connected rather than having fixed purpose CODEC and CPU DAIs and
      only allowing CODEC<->CPU interconnections.
      Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      dee89c4d
  34. 08 10月, 2008 1 次提交
  35. 25 9月, 2008 1 次提交
  36. 23 9月, 2008 1 次提交
  37. 07 8月, 2008 2 次提交
  38. 10 7月, 2008 2 次提交