[ARM] pxa: move AC97 register definitions into dedicated regs-ac97.h

The optimal change would be to move the AC97 register definitions into
the AC97 driver, unfortunately, the registers are shared between several
files. Move them into a dedicated regs-ac97.h first.
Signed-off-by: NEric Miao <eric.miao@marvell.com>

arch/arm/mach-pxa/include/mach/pxa-regs.h

@@ -131,102 +131,6 @@
  * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
  */
 
-/*
- * AC97 Controller registers
- */
-
-#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
-#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define PICR		__REG(0x40500004)  /* PCM In Control Register */
-#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
-#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define GCR		__REG(0x4050000C)  /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
-#endif
-#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
-#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
-#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
-#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
-#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
-
-#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
-#define POSR_FIFOE	(1 << 4)	/* FIFO error */
-#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define PISR		__REG(0x40500014)  /* PCM In Status Register */
-#define PISR_FIFOE	(1 << 4)	/* FIFO error */
-#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
-#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define GSR		__REG(0x4050001C)  /* Global Status Register */
-#define GSR_CDONE	(1 << 19)	/* Command Done */
-#define GSR_SDONE	(1 << 18)	/* Status Done */
-#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
-#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
-#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
-#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
-#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
-#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
-#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
-#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
-#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
-#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
-#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
-#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
-#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
-
-#define CAR		__REG(0x40500020)  /* CODEC Access Register */
-#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
-
-#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
-#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
-
-#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
-#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
-#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MICR		__REG(0x40500108)  /* Modem In Control Register */
-#define MICR_FEIE	(1 << 3)	/* FIFO Error */
-#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
-#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MISR		__REG(0x40500118)  /* Modem In Status Register */
-#define MISR_FIFOE	(1 << 4)	/* FIFO error */
-#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
-#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
-#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
-#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
-
-
 /*
  * Fast Infrared Communication Port - moved into drivers/net/irda/pxaficp_ir.c
  */

arch/arm/mach-pxa/include/mach/regs-ac97.h

+#ifndef __ASM_ARCH_REGS_AC97_H
+#define __ASM_ARCH_REGS_AC97_H
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
+#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define PICR		__REG(0x40500004)  /* PCM In Control Register */
+#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
+#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define GCR		__REG(0x4050000C)  /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
+#endif
+#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
+#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
+#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
+#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
+#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
+
+#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
+#define POSR_FIFOE	(1 << 4)	/* FIFO error */
+#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define PISR		__REG(0x40500014)  /* PCM In Status Register */
+#define PISR_FIFOE	(1 << 4)	/* FIFO error */
+#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
+#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define GSR		__REG(0x4050001C)  /* Global Status Register */
+#define GSR_CDONE	(1 << 19)	/* Command Done */
+#define GSR_SDONE	(1 << 18)	/* Status Done */
+#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
+#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
+#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
+#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
+#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
+#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
+#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
+#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
+#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
+#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
+#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
+#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
+#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
+
+#define CAR		__REG(0x40500020)  /* CODEC Access Register */
+#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
+
+#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
+#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
+
+#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
+#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
+#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MICR		__REG(0x40500108)  /* Modem In Control Register */
+#define MICR_FEIE	(1 << 3)	/* FIFO Error */
+#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
+#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MISR		__REG(0x40500118)  /* Modem In Status Register */
+#define MISR_FIFOE	(1 << 4)	/* FIFO error */
+#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
+#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
+#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
+#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
+
+#endif /* __ASM_ARCH_REGS_AC97_H */

drivers/input/touchscreen/mainstone-wm97xx.c

@@ -31,7 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/wm97xx.h>
 #include <linux/io.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
 
 #define VERSION		"0.13"
 

sound/arm/pxa2xx-ac97-lib.c

@@ -22,7 +22,7 @@
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
 #include <mach/pxa2xx-gpio.h>
 #include <mach/audio.h>
 

sound/arm/pxa2xx-ac97.c

@@ -22,6 +22,7 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
 #include <mach/audio.h>
 
 #include "pxa2xx-pcm.h"

sound/soc/pxa/pxa2xx-ac97.c

@@ -21,6 +21,7 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
 
 #include "pxa2xx-pcm.h"
 #include "pxa2xx-ac97.h"