- 19 10月, 2010 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix TI TSB82AA2 regression since 2.6.35
-
由 Sascha Hauer 提交于
This patch reverts the driver to enabling/disabling the NFC interrupt mask rather than enabling/disabling the system interrupt. This cleans up the driver so that it doesn't rely on interrupts being disabled within the interrupt handler. For i.MX21 we keep the current behaviour, that is calling enable_irq/disable_irq_nosync to enable/disable interrupts. This patch is based on earlier work by John Ogness. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NJohn Ogness <john.ogness@linutronix.de> Tested-by: NJohn Ogness <john.ogness@linutronix.de> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'for-linus/i2c/2636-rc8' of git://git.fluff.org/bjdooks/linux: i2c-imx: do not allow interruptions when waiting for I2C to complete i2c-davinci: Fix TX setup for more SoCs
-
由 Linus Torvalds 提交于
* fixes: v4l1: fix 32-bit compat microcode loading translation De-pessimize rds_page_copy_user
-
- 18 10月, 2010 3 次提交
-
-
由 Marc Kleine-Budde 提交于
The i2c_imx_trx_complete() function is using wait_event_interruptible_timeout() to wait for the I2C controller to signal that it has completed an I2C bus operation. If the process that causes the I2C operation receives a signal, the wait will be interrupted, returning an error. It is better to let the I2C operation finished before handling the signal (i.e. returning into userspace). It is safe to use wait_event_timeout() instead, because the timeout will allow the process to exit if the I2C bus hangs. It's also better to allow the I2C operation to finish, because unacknowledged I2C operations can cause the I2C bus to hang. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jon Povey 提交于
This patch is an improvement to 4bba0fd8 which got to mainline a little early. Sudhakar Rajashekhara explains that at least OMAP-L138 requires MDR mode settings before DXR for correct behaviour, so load MDR first with STT cleared and later load again with STT set. Tested on DM355 connected to Techwell TW2836 and Wolfson WM8985 Signed-off-by: NJon Povey <jon.povey@racelogic.co.uk> Acked-by: NTroy Kisky <troy.kisky@boundarydevices.com> Tested-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: rawmidi: fix oops (use after free) when unloading a driver module
-
- 17 10月, 2010 2 次提交
-
-
由 Stefan Richter 提交于
Revert commit 54672386 "firewire: ohci: fix up configuration of TI chips". It caused massive slow-down and data corruption with a TSB82AA2 based StarTech EC1394B2 ExpressCard and FireWire 800 harddisks. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/657081 http://thread.gmane.org/gmane.linux.kernel.firewire.user/4013 The fact that some card EEPROMs do not program these enhancements may be related to TSB81BA3 phy chip errata, if not to bugs of TSB82AA2 itself. We could re-add these configuration steps, but only conditional on a whitelist of cards on which these enhancements bring a proven positive effect. Reported-and-tested-by: NEric Shattow <lucent@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> 2.6.35 Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Clemens Ladisch 提交于
When a driver module is unloaded and the last still open file is a raw MIDI device, the card and its devices will be actually freed in the snd_card_file_remove() call when that file is closed. Afterwards, rmidi and rmidi->card point into freed memory, so the module pointer is likely to be garbage. (This was introduced by commit 9a1b64ca.) Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Reported-by: NKrzysztof Foltman <wdev@foltman.com> Cc: 2.6.30-2.6.35 <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 10月, 2010 14 次提交
-
-
由 Kyle McMartin 提交于
Fixes build for me... these are what's tested in byteorder.h... Signed-off-by: NKyle McMartin <kyle@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@redhat.com> Acked-by: NAl "my fuckup" Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kyle McMartin 提交于
Commit a7f8388e accidentally removed it... Al explains: "Sorry, reordering breakage. In the signals tree here I have static inline void sig_set_blocked(struct sigset_t *set) ... and it's used all over the place (including quite a few places where we currently have sigprocmask(SIG_SETMASK, set, NULL), which is what it's equivalent to). With that done, m32r doesn't use _BLOCKABLE anywhere, so it got removed. And that chunk got picked when I'd been reordering the queue to pull the arch-specific fixes in front. Sorry." Signed-off-by: NKyle McMartin <kyle@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Paris 提交于
We currently have a kernel internal type called aligned_u64 which aligns __u64's on 8 bytes boundaries even on systems which would normally align them on 4 byte boundaries. This patch creates a new type __aligned_u64 which does the same thing but which is exposed to userspace rather than being kernel internal. [akpm: merge early as both the net and audit trees want this] [akpm@linux-foundation.org: enhance the comment describing the reasons for using aligned_u64. Via Andreas and Andi.] Based-on-patch-by: NAndreas Gruenbacher <agruen@suse.de> Signed-off-by: NEric Paris <eparis@redhat.com> Cc: Jan Engelhardt <jengelh@medozas.de> Cc: David Miller <davem@davemloft.net> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
Fix a build error introduced by d6d1b650 ("param: simple locking for sysfs-writable charp parameters"). CC arch/um/kernel/trap.o arch/um/drivers/hostaudio_kern.c: In function 'hostaudio_open': arch/um/drivers/hostaudio_kern.c:204: error: '__param_dsp' undeclared (first use in this function) arch/um/drivers/hostaudio_kern.c:204: error: (Each undeclared identifier is reported only once arch/um/drivers/hostaudio_kern.c:204: error: for each function it appears in.) arch/um/drivers/hostaudio_kern.c: In function 'hostmixer_open_mixdev': arch/um/drivers/hostaudio_kern.c:265: error: '__param_mixer' undeclared (first use in this function) arch/um/drivers/hostaudio_kern.c:272: error: '__param_dsp' undeclared (first use in this function) Reported-by: NToralf Förster <toralf.foerster@gmx.de> Tested-by: NToralf Förster <toralf.foerster@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Dumazet 提交于
sysctl check complains with a WARN() when proc_doulongvec_minmax() or proc_doulongvec_ms_jiffies_minmax() are used by a vector of longs (with more than one element), with no min or max value specified. This is unexpected, given we had a bug on this min/max handling :) Reported-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: David Miller <davem@davemloft.net> Acked-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The compat code for the VIDIOCSMICROCODE ioctl is totally buggered. It's only used by the VIDEO_STRADIS driver, and that one is scheduled to staging and eventually removed unless somebody steps up to maintain it (at which point it should use request_firmware() rather than some magic ioctl). So we'll get rid of it eventually. But in the meantime, the compatibility ioctl code is broken, and this tries to get it to at least limp along (even if Mauro suggested just deleting it entirely, which may be the right thing to do - I don't think the compatibility translation code has ever worked unless you were very lucky). Reported-by: NKees Cook <kees.cook@canonical.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Don't try to "optimize" rds_page_copy_user() by using kmap_atomic() and the unsafe atomic user mode accessor functions. It's actually slower than the straightforward code on any reasonable modern CPU. Back when the code was written (although probably not by the time it was actually merged, though), 32-bit x86 may have been the dominant architecture. And there kmap_atomic() can be a lot faster than kmap() (unless you have very good locality, in which case the virtual address caching by kmap() can overcome all the downsides). But these days, x86-64 may not be more populous, but it's getting there (and if you care about performance, it's definitely already there - you'd have upgraded your CPU's already in the last few years). And on x86-64, the non-kmap_atomic() version is faster, simply because the code is simpler and doesn't have the "re-try page fault" case. People with old hardware are not likely to care about RDS anyway, and the optimization for the 32-bit case is simply buggy, since it doesn't verify the user addresses properly. Reported-by: NDan Rosenberg <drosenberg@vsecurity.com> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdio: fix SDIO suspend/resume regression
-
由 Ohad Ben-Cohen 提交于
Fix SDIO suspend/resume regression introduced by 4c2ef25f "mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resume": PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) pm_op(): platform_pm_suspend+0x0/0x5c returns -38 PM: Device pxa2xx-mci.0 failed to suspend: error -38 PM: Some devices failed to suspend 4c2ef25f moved the card removal/insertion mechanism out of MMC's suspend/resume path and into pm notifiers (mmc_pm_notify), and that broke SDIO's expectation that mmc_suspend_host() will remove the card, and squash the error, in case -ENOSYS is returned from the bus suspend handler (mmc_sdio_suspend() in this case). mmc_sdio_suspend() is using this whenever at least one of the card's SDIO function drivers does not have suspend/resume handlers - in that case it is agreed to force removal of the entire card. This patch fixes this regression by trivially bringing back that part of mmc_suspend_host(), which was removed by 4c2ef25f. Reported-and-tested-by: NSven Neumann <s.neumann@raumfeld.com> Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: <stable@kernel.org> Acked-by: NNicolas Pitre <nico@fluxnic.net> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Linus Torvalds 提交于
Merge branch 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimer: Preserve timer state in remove_hrtimer()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add Cando touch screen 15.6-inch product id HID: Add MULTI_INPUT quirk for turbox/mosart touchscreen HID: hidraw, fix a NULL pointer dereference in hidraw_write HID: hidraw, fix a NULL pointer dereference in hidraw_ioctl
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: ubd: fix incorrect sector handling during request restart ps3disk: passing wrong variable to bvec_kunmap_irq()
-
- 15 10月, 2010 6 次提交
-
-
由 Tejun Heo 提交于
Commit f81f2f7c (ubd: drop unnecessary rq->sector manipulation) dropped request->sector manipulation in preparation for global request handling cleanup; unfortunately, it incorrectly assumed that the updated sector wasn't being used. ubd tries to issue as many requests as possible to io_thread. When issuing fails due to memory pressure or other reasons, the device is put on the restart list and issuing stops. On IO completion, devices on the restart list are scanned and IO issuing is restarted. ubd issues IOs sg-by-sg and issuing can be stopped in the middle of a request, so each device on the restart queue needs to remember where to restart in its current request. ubd needs to keep track of the issue position itself because, * blk_rq_pos(req) is now updated by the block layer to keep track of _completion_ position. * Multiple io_req's for the current request may be in flight, so it's difficult to tell where blk_rq_pos(req) currently is. Add ubd->rq_pos to keep track of the issue position and use it to correctly restart io_req issue. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NRichard Weinberger <richard@nod.at> Tested-by: NRichard Weinberger <richard@nod.at> Tested-by: NChris Frey <cdfrey@foursquare.net> Cc: stable@kernel.org Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Linus Torvalds 提交于
If you build aout support as a module, you'll want these exported. Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Tony Luck reports that the addition of the access_ok() check in commit 0eead9ab ("Don't dump task struct in a.out core-dumps") broke the ia64 compile due to missing the necessary header file includes. Rather than add yet another include (<asm/unistd.h>) to make everything happy, just uninline the silly core dump helper functions and move the bodies to fs/exec.c where they make a lot more sense. dump_seek() in particular was too big to be an inline function anyway, and none of them are in any way performance-critical. And we really don't need to mess up our include file headers more than they already are. Reported-and-tested-by: NTony Luck <tony.luck@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ehea: Fix a checksum issue on the receive path net: allow FEC driver to use fixed PHY support tg3: restore rx_dropped accounting b44: fix carrier detection on bind net: clear heap allocations for privileged ethtool actions NET: wimax, fix use after free ATM: iphase, remove sleep-inside-atomic ATM: mpc, fix use after free ATM: solos-pci, remove use after free net/fec: carrier off initially to avoid root mount failure r8169: use device model DMA API r8169: allocate with GFP_KERNEL flag when able to sleep
-
由 Linus Torvalds 提交于
akiphie points out that a.out core-dumps have that odd task struct dumping that was never used and was never really a good idea (it goes back into the mists of history, probably the original core-dumping code). Just remove it. Also do the access_ok() check on dump_write(). It probably doesn't matter (since normal filesystems all seem to do it anyway), but he points out that it's normally done by the VFS layer, so ... [ I suspect that we should possibly do "vfs_write()" instead of calling ->write directly. That also does the whole fsnotify and write statistics thing, which may or may not be a good idea. ] And just to be anal, do this all for the x86-64 32-bit a.out emulation code too, even though it's not enabled (and won't currently even compile) Reported-by: Nakiphie <akiphie@lavabit.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2010 11 次提交
-
-
由 Salman Qazi 提交于
The race is described as follows: CPU X CPU Y remove_hrtimer // state & QUEUED == 0 timer->state = CALLBACK unlock timer base timer->f(n) //very long hrtimer_start lock timer base remove_hrtimer // no effect hrtimer_enqueue timer->state = CALLBACK | QUEUED unlock timer base hrtimer_start lock timer base remove_hrtimer mode = INACTIVE // CALLBACK bit lost! switch_hrtimer_base CALLBACK bit not set: timer->base changes to a different CPU. lock this CPU's timer base The bug was introduced with commit ca109491 (hrtimer: removing all ur callback modes) in 2.6.29 [ tglx: Feed new state via local variable and add a comment. ] Signed-off-by: NSalman Qazi <sqazi@google.com> Cc: akpm@linux-foundation.org Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101012142351.8485.21823.stgit@dungbeetle.mtv.corp.google.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: ioat2: fix performance regression
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux: nfsd: fix BUG at fs/nfsd/nfsfh.h:199 on unlink
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ring-buffer: Fix typo of time extends per page perf, MIPS: Support cross compiling of tools/perf for MIPS perf: Fix incorrect copy_from_user() usage
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: relax ioremap prohibition (309caa9c) for -final and -stable ARM: 6440/1: ep93xx: DMA: fix channel_disable cpuimx27: fix i2c bus selection cpuimx27: fix compile when ULPI is selected ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9 ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processors ARM: fix section mismatch warnings in Versatile Express ARM: 6412/1: kprobes-decode: add support for MOVW instruction ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to data corruption
-
由 Linus Torvalds 提交于
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: iommu-load cam register before flushing the entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: Silent spurious error message drm/radeon/kms: fix bad cast/shift in evergreen.c drm/radeon/kms: make TV/DFP table info less verbose drm/radeon/kms: leave certain CP int bits enabled drm/radeon/kms: avoid corner case issue with unmappable vram V2
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, numa: For each node, register the memory blocks actually used x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order x86, mce, therm_throt.c: Fix missing curly braces in error handling logic
-
由 Dan Williams 提交于
Commit 07934481 "DMAENGINE: generic channel status v2" changed the interface for how dma channel progress is retrieved. It inadvertently exported an internal helper function ioat_tx_status() instead of ioat_dma_tx_status(). The latter polls the hardware to get the latest completion state, while the helper just evaluates the current state without touching hardware. The effect is that we end up waiting for completion timeouts or descriptor allocation errors before the completion state is updated. iperf (before fix): [SUM] 0.0-41.3 sec 364 MBytes 73.9 Mbits/sec iperf (after fix): [SUM] 0.0- 4.5 sec 499 MBytes 940 Mbits/sec This is a regression starting with 2.6.35. Cc: <stable@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Reported-by: NRichard Scobie <richard@sauce.co.nz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Breno Leitao 提交于
Currently we set all skbs with CHECKSUM_UNNECESSARY, even those whose protocol we don't know. This patch just add the CHECKSUM_COMPLETE tag for non TCP/UDP packets. Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 J. Bruce Fields 提交于
As of commit 43a9aa64 "NFSD: Fill in WCC data for REMOVE, RMDIR, MKNOD, and MKDIR", we sometimes call fh_unlock on a filehandle that isn't fully initialized. We should fix up the callers, but as a quick fix it is also sufficient just to remove this assertion. Reported-by: NMarius Tolzmann <tolzmann@molgen.mpg.de> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-