Implements device ALLOCATE_VPP command, to be used for granular QoS
configuration of VFs by the PF device. Defines and queries the amount
of VPPs assigned to each port, and the amount of VPPs assigned to each
priority of each port. Once the total VPPs are split between the priorities
of a port, they may be assigned with a share of the BW or a rate limit.

Split into two functions (get/set) whoch are supplied with
mlx4_alloc_vpp_context and physical port number.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create two new files fw_qos.h and fw_qos.c in mlx4_core module.

It gathers all relevant QoS firmware related commands etc, thus improving
encapsulation of the mlx4_core module. For now it contains the QoS existing
commands: mlx4_SET_PORT_SCHEDULER and mlx4_SET_PORT_PRIO2TC.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previous vf_oper and vf_admin code created very long lines, making it hard
to read the code. Added relevant in-struct pointers to reduce code
complexity and avoid code lines spread over 80 lines. Same logic is preserved.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently implemented as static function in resource_tracker.c --
this change will allow other files in mlx4_core to use it as well.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently any change of netdev features results in a call to
mlx4_en_update_loopback_state(). Those calls are unnecessary,
and should be called only upon loopback feature change.

Also moved some of the logic into mlx4_en_update_loopback_state().
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable RSS support for fragmented IP packets, when device supports it.
Until now, fragmented IP packets were directed only to the default_qpn.
Since IP fragments (datagram) have no upper protocols (L3 IP packets),
hash is performed on 3-tuple - dst MAC, source IP and dest IP. The HW
makes sure that this holds for the 1st fragment too, so all fragments
go to the same QP.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/usb/asix_common.c
	drivers/net/usb/sr9800.c
	drivers/net/usb/usbnet.c
	include/linux/usb/usbnet.h
	net/ipv4/tcp_ipv4.c
	net/ipv6/tcp_ipv6.c

The TCP conflicts were overlapping changes.  In 'net' we added a
READ_ONCE() to the socket cached RX route read, whilst in 'net-next'
Eric Dumazet touched the surrounding code dealing with how mini
sockets are handled.

With USB, it's a case of the same bug fix first going into net-next
and then I cherry picked it back into net.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull dmaengine fixes from Vinod Koul:
 "This time we have addition of caps for jz4740 which fixes intentional
  warning at boot.  Then we have memory leak issues in drivers using
  virt-dma by Peter on few drive"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: moxart-dma: Fix memory leak when stopping a running transfer
  dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer
  dmaengine: omap-dma: Fix memory leak when terminating running transfer
  dmaengine: edma: fix memory leak when terminating running transfers
  dmaengine: jz4740: Define capabilities

Pull networking fixes from David Miller:

 1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from
    Johannes Berg.

 2) iwlwifi leaks memory every module load/unload cycles, fix from Larry
    Finger.

 3) Need to use for_each_netdev_safe() in rtnl_group_changelink()
    otherwise we can crash, from WANG Cong.

 4) mlx4 driver does register_netdev() too early in the probe sequence,
    from Ido Shamay.

 5) Don't allow router discovery hop limit to decrease the interface's
    hop limit, from D.S. Ljungmark.

 6) tx_packets and tx_bytes improperly accounted for certain classes of
    USB network devices, fix from Ben Hutchings.

 7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr
    tables in the error path, they must instead use ip{6}mr_free_table().
    Fix from WANG Cong.

 8) cxgb4 doesn't properly quiesce all RX activity before unregistering
    the netdevice.  Fix from Hariprasad Shenai.

 9) Fix hash corruptions in ipvlan driver, from Jiri Benc.

10) nla_memcpy(), like a real memcpy, should fully initialize the
    destination buffer, even if the source attribute is smaller.  Fix
    from Jiri Benc.

11) Fix wrong error code returned from iucv_sock_sendmsg().  We should
    use whatever sock_alloc_send_skb() put into 'err'.  From Eugene
    Crosser.

12) Fix slab object leak on module unload in TIPC, from Ying Xue.

13) Need a READ_ONCE() when reading the cached RX socket route in
    tcp_v{4,6}_early_demux().  From Michal Kubecek.

14) Still too many problems with TPC support in the ath9k driver, so
    disable it for now.  From Felix Fietkau.

15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from
    Larry Finger.

16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian
    King.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  cxgb4: Fix to dump devlog, even if FW is crashed
  cxgb4: Firmware macro changes for fw verison 1.13.32.0
  bnx2x: Fix kdump when iommu=on
  bnx2x: Fix kdump on 4-port device
  mac80211: fix RX A-MPDU session reorder timer deletion
  MAINTAINERS: Update Intel Wired Ethernet Driver info
  tipc: fix a slab object leak
  net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet
  af_iucv: fix AF_IUCV sendmsg() errno
  openvswitch: Return vport module ref before destruction
  netlink: pad nla_memcpy dest buffer with zeroes
  bonding: Bonding Overriding Configuration logic restored.
  ipvlan: fix check for IP addresses in control path
  ipvlan: do not use rcu operations for address list
  ipvlan: protect against concurrent link removal
  ipvlan: fix addr hash list corruption
  net: fec: setup right value for mdio hold time
  net: tcp6: fix double call of tcp_v6_fill_cb()
  cxgb4vf: Fix sparse warnings
  netns: don't clear nsid too early on removal
  ...

Nicolas Dichtel says:

====================
Remove iflink field from the net_device structure

The first goal of this series was to advertise the veth peer via the IFLA_LINK
attribute, but iflink was not ready for network namespaces.

The iflink of an interface should be set to its ifindex for a physical interface
and to another value (0 if not relevant) for a virtual interface.
This was not the case for some interfaces, like vxlan, bond, or bridge for
example.
There is also a risk, if the targeted interface moves to another netns, that the
ifindex changes without updating corresponding iflink fields (eg. vlan).

Moving the management of this property into virtual interface drivers allows to
better handle this last case because most of virtual interface drivers have a
pointer to the link netdevice.
Anyway, dev->iflink value was always a copy of some internal data of the virtual
interface driver, thus let's use these internal data directly.

So, this series removes the iflink field and let the drivers manage it.
Only the last patch was present in the v1, but I fully rework it.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that the peer netns is advertised in rtnl messages, we can set this property
so that IFLA_LINK will advertise the peer ifindex. It allows the userland to get
the full veth configuration.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Virtual interfaces are supposed to set an iflink value != of their ifindex.
It was not the case for some of them, like vxlan, bond or bridge.
Let's set iflink to 0 when dev->rtnl_link_ops is set.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that all users of iflink have the ndo_get_iflink handler available, it's
possible to remove this field.

By default, dev_get_iflink() returns the ifindex of the interface.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't use dev->iflink anymore.

CC: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't use dev->iflink anymore.

CC: Roland Dreier <roland@kernel.org>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't use dev->iflink anymore.

CC: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't use dev->iflink anymore.

CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't use dev->iflink anymore.

CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't use dev->iflink anymore.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't use dev->iflink anymore.

CC: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't use dev->iflink anymore.

CC: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The goal of this patch is to prepare the removal of the iflink field. It
introduces a new ndo function, which will be implemented by virtual interfaces.

There is no functional change into this patch. All readers of iflink field
now call dev_get_iflink().
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the TX sgl is expanded we need to explicitly mark end of data
at the last buffer that contains data.

Changes in v2
 - use type 'bool' and true/false for 'mark'.
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
DSA Mavell drivers refactoring and cleanup

v1->v2:
 * Add missing signed-of-by: For patches authored by Guenter Roeck.
 * Add Reviewed by from Guenter Roack to patch #5.

This is a collection of patches again net-next from today containing
refactoring and consolidate of code, cleanups and using #define's to
replace register numbers.

Patch #1 Swaps the 6131 driver to use the consolidated setup code.

Patch #2 Moves the Switch IDs used during probe into a central
         location.  We need these later so that we can differentiate
         the different features the devices have.

Patch #3 Makes the 6131 driver set the number of ports in the private
         state structure. It then uses this, rather than hard coded
         maximum number of ports.

Patch #4 Similar to Patch #3, but for the 6123_61_65 driver.

Patch #5 Similar to Patch #3, and #4, but for all the remaining
         drivers.  This greatly increases the similarity of the code
         between drivers, allow further patches to consolidate the
         duplicated code.

Patch #6 Consolidate the switch reset code, which has two minor
         variants. Removes around 35 lines per driver.

Patch #7 Moves phy page access functions out of the 6352 driver into
         the shared code. Currently only the 6352 driver uses this,
         but it is likely other devices will come along wanting this
         functionality.

Patch #8 Consolidates the code used to access phy registers. Removes
         around 40 lines of code per driver.

Patch #9 Fixes missing mutex locking in the EEE code, and refactors
         the code a bit to make it more understandable with respect to
         locks.

Patch #10 Consolidates reading statistics. This is very similar code
          for all devices, but the number of available statistics
          differ, which can be determined from the product ID. Removes
	  around 65 lines per driver.

Patch #11 Add #defines for registers, and bits within the
          registers. For the moment, this is limited to the shared
          code. The individual drivers will be converted once the
          remaining duplicated code is consolidated

Patch #12 Fix broken statistic counters on the 6172. The 6352 family
          requires the port number is poked into a different set of
          bits in the register compared to other devices.

Many thanks to Guenter Roeck for repeatedly reviewing the patches and
testing them on his hardware.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The statistic counters for the mv88e6172 never worked. This device is
a member of the 6352 family of chips, which has a slightly different
layout of the register used for capturing statistics. Add support for
detecting this family and poking the port in the right place in the
register.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than refer to registers by number, define mnemonics. Also
define mnemonics for the commonly used bits within the registers.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reading the statistics from the hardware is the same for all
chips. What differs is the number of available statistics. Have just
one copy of the code in the shared mv88e6xxx.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The phy_mutex should be held while reading and writing to the phy.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the common code for reading and writing phy registers into the
shared mv88e6xxx.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These functions could in future be used by other drivers. Move them
into the shared area.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marvell switches are all reset in nearly the same way. The only
difference is if the PPU should be enabled or not. Move this
code into the shared mv88x6xxx.c.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As a step towards consolidating code, consistently set the
number of ports in the private state structure, and make use of it in
loops.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Determine and use number of switch ports from chip ID instead of always
using the maximum, and return error when an attempt is made to access a
non-existing port.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Determine and use number of switch ports from chip ID instead of always
using the maximum, and return error when an attempt is made to access a
non-existing port.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This will let us use the switch product IDs in the common source code.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Common initialization functions will be needed to enable
HW bridging support.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct spelling of locally.

Also remove extra space before tab character in struct fq_flow.
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix some spelling / typos:
* droppped -> dropped
* asddress -> address
* compatbility -> compatibility
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move about half a KB of data to text.

Miscellanea:

o Move strings out of the .h file into the .c file
  in case the .h file is ever #included twice
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>