slid field in struct ib_wc is increased to 32 bits.
This enables core components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

sm_lid field in struct ib_port_attr is increased to 32 bits. This
enables core components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

lid field in struct ib_port_attr is increased to 32 bits. This enables core
components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

MAD RMPP contains slid field which is 16 bits in
length, increase it to 32 bits.
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

IPoIB contains local_lid field which is 16 bits in
length, increase it to 32 bits.
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

srpt contains lid and sm_lid fields which are 16 bits in
length, increase them to 32 bits.
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

OPA address handle atttibutes that have 32 bit LIDs would have to
be converted to IB address handle attribute with the LID field
programmed in the GID before copying to user space.
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: NDon Hiatt <don.hiatt@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When setting up the Xenstore watch for the memory target size the new
watch will fire at once. Don't try to reach the configured target size
by onlining new memory in this case, as the current memory size will
be smaller in almost all cases due to e.g. BIOS reserved pages.

Onlining new memory will lead to more problems e.g. undesired conflicts
with NVMe devices meant to be operated as block devices.

Instead remember the difference between target size and current size
when the watch fires for the first time and apply it to any further
size changes, too.

In order to avoid races between balloon.c and xen-balloon.c init calls
do the xen-balloon.c initialization from balloon.c.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

log a message when we enter this situation:
1) we already allocated the max number of available grants from hypervisor
and
2) we still need more (but the request fails because of 1)).

Sometimes the lack of grants causes IO hangs in xen_blkfront devices.
Adding this log would help debuging.
Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

gcc-7 warns about the result of a constant multiplication used as
a boolean:

drivers/ide/ide-timings.c: In function 'ide_timing_quantize':
drivers/ide/ide-timings.c:112:24: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
  q->setup   = EZ(t->setup   * 1000,  T);

This slightly rearranges the macro to simplify the code and avoid
the warning at the same time.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

balance-alb mode used to have transmit dynamic load balancing feature
enabled by default.  However, transmit dynamic load balancing no longer
works in balance-alb after commit 8b426dc5 ("bonding: remove
hardcoded value").

Both balance-tlb and balance-alb use the function bond_do_alb_xmit() to
send packets.  This function uses the parameter tlb_dynamic_lb.
tlb_dynamic_lb used to have the default value of 1 for balance-alb, but
now the value is set to 0 except in balance-tlb.

Re-enable transmit dyanmic load balancing by initializing tlb_dynamic_lb
for balance-alb similar to balance-tlb.

Fixes: 8b426dc5 ("bonding: remove hardcoded value")
Signed-off-by: NKosuke Tatsukawa <tatsu@ab.jp.nec.com>
Acked-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Push the request_irq function to the end of probe so as
to ensure all the required fields are populated in the event
of an ISR getting executed right after requesting the irq.

Currently while loading the crash kernel a crash was seen as
soon as devm_request_threaded_irq was called. This was due to
n->poll being NULL which is called as part of net_rx_action
function.
Suggested-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The BCM53125 entry was missing an arl_entries member which would
basically prevent the ARL search from terminating properly. This switch
has 4 ARL entries, so add that.

Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initialize the port_num for iWARP in rdma_init_qp_attr.

Fixes: 5ecce4c9("Check port number supplied by user verbs cmds")
Cc: <stable@vger.kernel.org> # v2.6.14+
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Tested-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The port number is only valid if IB_QP_PORT is set in the mask.
So only check port number if it is valid to prevent modify_qp from
failing due to an invalid port number.

Fixes: 5ecce4c9("Check port number supplied by user verbs cmds")
Cc: <stable@vger.kernel.org> # v2.6.14+
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Tested-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We might get some bogus error completions in case the target will
remotely invalidate the rkey and the HCA will need to retransmit
from this buffer.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If we modified the qp to ERROR state, and
drained the recieve queue, post_recv must
trigger the responder task to complete
the drain work request.

Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NVijay Immanuel <vijayi@attalasystems.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>--
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Wrap ib_copy_to_udata with a function that ensures that the data
being copied over to user space isn't longer than the allowed.

Fixes: cecbcddf ("qedr: Add support for QP verbs")
Fixes: a7efd777 ("qedr: Add support for PD,PKEY and CQ verbs")
Fixes: ac1b36e5 ("qedr: Add support for user context verbs")
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Only use the read sge lkey/addr and the remote rkey/addr if the
length of the read is not zero. Otherwise the read response might
be treated as the RTR read response and not delivered to the
application. Or worse Terminator hardware will fail a 0B read
if the STAG is 0 even if the read length is 0.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

CM REQs cannot be successfully retried, because a new pv_cm_id is
created for each request, without checking if one already exists.

By checking if an id exists before creating one, the bug is fixed.

This bug can be provoked by running an RDMA CM user-land application,
but inserting a five seconds delay before the rdma_accept() call on
the passive side. This delay is larger than the default CMA timeout,
and triggers a retry from the active side. The retried REQ will use
another pv_cm_id (the cm_id on the wire). This confuses the CM
protocol and two REJs are sent from the passive side.

Here is an excerpt from ibdump running without the patch:

3.285092       LID: 4 -> LID: 4       SDP 290 CM: ConnectRequest(SDP Hello)
7.382711       LID: 4 -> LID: 4       SDP 290 CM: ConnectRequest(SDP Hello)
7.382861       LID: 4 -> LID: 4       InfiniBand 290 CM: ConnectReject
7.387644       LID: 4 -> LID: 4       InfiniBand 290 CM: ConnectReject

and here is the same with bug fix applied:

3.251010       LID: 4 -> LID: 4       SDP 290 CM: ConnectRequest(SDP Hello)
7.349387       LID: 4 -> LID: 4       SDP 290 CM: ConnectRequest(SDP Hello)
8.258443       LID: 4 -> LID: 4       SDP 290 CM: ConnectReply(SDP Hello)
8.259890       LID: 4 -> LID: 4       InfiniBand 290 CM: ReadyToUse
Suggested-by: NVenkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: NHåkon Bugge <haakon.bugge@oracle.com>
Reported-by: NWei Lin Guay <wei.lin.guay@oracle.com>
Tested-by: NWei Lin Guay <wei.lin.guay@oracle.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Acked-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Current computation of qp->timeout_jiffies in rvt_modify_qp() will cause
overflow due to the fact that the input to the function usecs_to_jiffies
is only 32-bit ( unsigned int). Overflow will occur when attr->timeout is
equal to or greater than 30. The consequence is unnecessarily excessive
retry and thus degradation of the system performance.

This patch fixes the problem by limiting the input to 5-bit and calling
usecs_to_jiffies() before multiplying the scaling factor.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Delete unused variables to prevent sparse warnings.

Fixes: db1b5ddd ("IB/core: Rename uverbs event file structure")
Fixes: fd3c7904 ("IB/core: Change idr objects to use the new schema")
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Local ack delay exposed by the driver is 0 which means infinite QP
timeout. Reporting the default value to 16 (approx 260ms)
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

While invoking the req_notify_cq hook, ULPs can request
whether the CQs have any CQEs pending. If CQEs are pending,
drivers can indicate  it by returning 1 for req_notify_cq.
The stack will poll CQ again till CQ is empty.

This patch peeks the CQ for any valid entries and return accordingly.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix the incorrect reporting of number of polled
entries by taking into account the max CQ depth
in the driver.
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Driver shall check if the host system bios has enabled
Atomic operations capability in PCI Device Control 2
register of the pci-device. Expose the ATOMIC_HCA
flag only if the Atomic operations capability is set.
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Starting FW version 20.6.47, firmware is keeping separate statistics
for L2 and RDMA. However, driver needs to specify RDMA or not when
allocating stat_ctx.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There's a couple of bugs in the support of max_rd_atomic and
max_dest_rd_atomic. In the modify_qp, if the requested max_rd_atomic,
which is the ORRQ size, is greater than what the chip can support,
then we have to cap the request to chip max as we can't have the HW
overflow the ORRQ. Capping the max_rd_atomic support internally is okay
to do as the remaining read/atomic WRs will still be sitting in the SQ.
However, for the max_dest_rd_atomic, the driver has to error out as
this dictates the IRRQ size and we can't control what the remote
side sends.
Signed-off-by: NEddie Wai <eddie.wai@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

- Report supported value for max_mr_size to IB stack in query_device.
   Also, check and log if MR size requested by application in
   reg_user_mr() is greater than value currently supported by driver.
 - Report only 4K page size support for now
 - Fix Max_QP value returned by ibv_devinfo -vv.
   In case of PF, FW reserves 129 QPs for creating QP1s of VFs
   and PF. So the max_qp value reported by FW for PF doesn'tt include
   the QP1. Fixing this issue by adding 1 with the value reported
   by FW.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This fix is added only to avoid system crash in some a
specific scenario. When bnxt_re driver is loaded and if
user tries to change interface mac address, delete GID
fails because QP1 is still associated with existing MAC
(default GID). If the above command fails GID tables are
not modified in the h/w or driver, but the GID context memory
is freed. Now, if the user changes the mac back to the original
value, another add_gid comes to the driver where the driver
reports that the GID is already present in its table
and tries to access the context which was already freed.

So, in this case, in order to  avoid NULL pointer de-reference,
this patch removes the context memory free  if delete_gid fails
and the same context memory is re-used in new add_gid.
Memory cleanup will be taken care during driver unload, while
deleting the GID table.
Signed-off-by: NKalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Posting WQE size of 2 results in a WQE_FORMAT_ERROR
thrown by the HW as it requires host to supply WQE Size with room
for atleast one SGE so that the resulting WQE size be atleast 3.
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The driver must free the DPI during the dealloc_ucontext
instead of freeing it during dealloc_pd. However, the DPI
allocation scheme remains unchanged.
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

"umem" is a valid pointer.  We intended to print "*umem" or even just
"err" instead.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If either of these allocations fail then we return ERR_PTR(0).  That's
equivalent to NULL and results in a NULL pointer dereference in the
caller.

Fixes: fe2caefc ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We should preserve the original "status" error code instead of resetting
it to zero.  Returning ERR_PTR(0) is the same as NULL and results in a
NULL dereference in the callers.  I added a printk() on error instead.

Fixes: 45e86b33 ("RDMA/ocrdma: Cache recv DB until QP moved to RTR")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We accidentally don't set the error code on some error paths.  It means
return ERR_PTR(0) which is NULL and results in a NULL dereference in the
caller.

Fixes: 13a23933 ("RDMA/cxgb3: Don't ignore insert_handle() failures")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If one of these kmalloc() calls fails then we return ERR_PTR(0) which is
NULL.  It results in a NULL dereference in the callers.

Fixes: cfdda9d7 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We accidentally forgot to set the error code if ib_copy_from_udata()
fails.  It means we return ERR_PTR(0) which is NULL and results in a
NULL dereference in the callers.

Fixes: d3749841 ("i40iw: add files for iwarp interface")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We accidentally don't see the error code on some of these error paths.
It means we return ERR_PTR(0) which is NULL and it results in a NULL
dereference in the caller.

This bug dates to pre-git days.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

bnxt_re_alloc_mw() doesn't return NULL, it returns error pointers.

Fixes: 9152e0b7 ("RDMA/bnxt_re: HW workarounds for handling specific conditions")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>