commit 163be6ff7739b12ff300d77897d340f661821da2 upstream.

If a gadget driver is in the pending drivers list, a UDC
becomes available and udc_bind_to_driver() fails, then it
gets deleted from the pending list.
i.e. list_del(&driver->pending) in check_pending_gadget_drivers().

Then if that gadget driver is unregistered,
usb_gadget_unregister_driver() does a list_del(&driver->pending)
again thus causing a page fault as that list entry has been poisoned
by the previous list_del().

Fix this by using list_del_init() instead of list_del() in
check_pending_gadget_drivers().

Test case:

- Make sure no UDC is available
- modprobe g_mass_storage file=wrongfile
- Load UDC driver so it becomes available
	lun0: unable to open backing file: wrongfile
- modprobe -r g_mass_storage

[   60.900431] Unable to handle kernel paging request at virtual address dead000000000108
[   60.908346] Mem abort info:
[   60.911145]   ESR = 0x96000044
[   60.914227]   Exception class = DABT (current EL), IL = 32 bits
[   60.920162]   SET = 0, FnV = 0
[   60.923217]   EA = 0, S1PTW = 0
[   60.926354] Data abort info:
[   60.929228]   ISV = 0, ISS = 0x00000044
[   60.933058]   CM = 0, WnR = 1
[   60.936011] [dead000000000108] address between user and kernel address ranges
[   60.943136] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[   60.948691] Modules linked in: g_mass_storage(-) usb_f_mass_storage libcomposite xhci_plat_hcd xhci_hcd usbcore ti_am335x_adc kfifo_buf omap_rng cdns3 rng_core udc_core crc32_ce xfrm_user crct10dif_ce snd_so6
[   60.993995] Process modprobe (pid: 834, stack limit = 0x00000000c2aebc69)
[   61.000765] CPU: 0 PID: 834 Comm: modprobe Not tainted 4.19.59-01963-g065f42a60499 #92
[   61.008658] Hardware name: Texas Instruments SoC (DT)
[   61.014472] pstate: 60000005 (nZCv daif -PAN -UAO)
[   61.019253] pc : usb_gadget_unregister_driver+0x7c/0x108 [udc_core]
[   61.025503] lr : usb_gadget_unregister_driver+0x30/0x108 [udc_core]
[   61.031750] sp : ffff00001338fda0
[   61.035049] x29: ffff00001338fda0 x28: ffff800846d40000
[   61.040346] x27: 0000000000000000 x26: 0000000000000000
[   61.045642] x25: 0000000056000000 x24: 0000000000000800
[   61.050938] x23: ffff000008d7b0d0 x22: ffff0000088b07c8
[   61.056234] x21: ffff000001100000 x20: ffff000002020260
[   61.061530] x19: ffff0000010ffd28 x18: 0000000000000000
[   61.066825] x17: 0000000000000000 x16: 0000000000000000
[   61.072121] x15: 0000000000000000 x14: 0000000000000000
[   61.077417] x13: ffff000000000000 x12: ffffffffffffffff
[   61.082712] x11: 0000000000000030 x10: 7f7f7f7f7f7f7f7f
[   61.088008] x9 : fefefefefefefeff x8 : 0000000000000000
[   61.093304] x7 : ffffffffffffffff x6 : 000000000000ffff
[   61.098599] x5 : 8080000000000000 x4 : 0000000000000000
[   61.103895] x3 : ffff000001100020 x2 : ffff800846d40000
[   61.109190] x1 : dead000000000100 x0 : dead000000000200
[   61.114486] Call trace:
[   61.116922]  usb_gadget_unregister_driver+0x7c/0x108 [udc_core]
[   61.122828]  usb_composite_unregister+0x10/0x18 [libcomposite]
[   61.128643]  msg_cleanup+0x18/0xfce0 [g_mass_storage]
[   61.133682]  __arm64_sys_delete_module+0x17c/0x1f0
[   61.138458]  el0_svc_common+0x90/0x158
[   61.142192]  el0_svc_handler+0x2c/0x80
[   61.145926]  el0_svc+0x8/0xc
[   61.148794] Code: eb03003f d10be033 54ffff21 a94d0281 (f9000420)
[   61.154869] ---[ end trace afb22e9b637bd9a7 ]---
Segmentation fault
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 389ce1a7c5279ebfb682fab220b4021b2bd49c8b upstream.

The gic-its node unit-address has an additional zero compared
to the actual reg value. Fix it.

Fixes: ea47eed3 ("arm64: dts: ti: Add Support for AM654 SoC")
Reported-by: NRobert Tivy <rtivy@ti.com>
Signed-off-by: NSuman Anna <s-anna@ti.com>
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7b2db65b59c30d58c129d3c8b2101feca686155a upstream.

24 bits is supported in all modes and 16 bit only when the codec is slave
and the DAI is set to RIGHT_J.

Remove the unsupported sample format.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190919071652.31724-1-peter.ujfalusi@ti.comSigned-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5b216ea1c40cf06eead15054c70e238c9bd4729e upstream.

Newer versions of GCC (>= 9) demand that the size of the string to be
copied must be explicitly smaller than the size of the destination.
Thus, the NULL char has to be taken into account on strncpy.

This will avoid the following compiling error:

  tlbie_test.c: In function 'main':
  tlbie_test.c:639:4: error: 'strncpy' specified bound 100 equals destination size
      strncpy(logdir, optarg, LOGDIR_NAME_SIZE);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors
Signed-off-by: NDesnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191003211010.9711-1-desnesn@linux.ibm.com
[sandipan: Backported to v4.19]
Signed-off-by: NSandipan Das <sandipan@linux.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 93cad5f789951eaa27c3392b15294b4e51253944 upstream.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Some minor fixes to make it build]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-4-aneesh.kumar@linux.ibm.com
[sandipan: Backported to v4.19]
Signed-off-by: NSandipan Das <sandipan@linux.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 047e6575aec71d75b765c22111820c4776cd1c43 upstream.

On POWER9, under some circumstances, a broadcast TLB invalidation will
fail to invalidate the ERAT cache on some threads when there are
parallel mtpidr/mtlpidr happening on other threads of the same core.
This can cause stores to continue to go to a page after it's unmapped.

The workaround is to force an ERAT flush using PID=0 or LPID=0 tlbie
flush. This additional TLB flush will cause the ERAT cache
invalidation. Since we are using PID=0 or LPID=0, we don't get
filtered out by the TLB snoop filtering logic.

We need to still follow this up with another tlbie to take care of
store vs tlbie ordering issue explained in commit:
a5d4b589 ("powerpc/mm: Fixup tlbie vs store ordering issue on
POWER9"). The presence of ERAT cache implies we can still get new
stores and they may miss store queue marking flush.

Cc: stable@vger.kernel.org
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-3-aneesh.kumar@linux.ibm.com
[sandipan: Backported to v4.19]
Signed-off-by: NSandipan Das <sandipan@linux.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ad0d315b4d4e7138f43acf03308192ec00e9614d upstream.

The SIMATIC IPC227E uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this device
to the critical systems list.

Fixes: 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 32b5a2c9950b9284000059d752f7afa164deb15e ]

Commit 715a1233 ("wireless: don't write C files on failures") drops
the `test -f $$f` check. The list of targets contains the
CONFIG_CFG80211_EXTRA_REGDB_KEYDIR directory itself, and this check used
to filter it out. After the check was removed, the extra keydir option
no longer works, failing with the following message:

od: 'standard input': read error: Is a directory

This commit restores the check to make extra keydir work again.

Fixes: 715a1233 ("wireless: don't write C files on failures")
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 55667441c84fa5e0911a0aac44fb059c15ba6da2 ]

UDP IPv6 packets auto flowlabels are using a 32bit secret
(static u32 hashrnd in net/core/flow_dissector.c) and
apply jhash() over fields known by the receivers.

Attackers can easily infer the 32bit secret and use this information
to identify a device and/or user, since this 32bit secret is only
set at boot time.

Really, using jhash() to generate cookies sent on the wire
is a serious security concern.

Trying to change the rol32(hash, 16) in ip6_make_flowlabel() would be
a dead end. Trying to periodically change the secret (like in sch_sfq.c)
could change paths taken in the network for long lived flows.

Let's switch to siphash, as we did in commit df453700e8d8
("inet: switch IP ID generator to siphash")

Using a cryptographically strong pseudo random function will solve this
privacy issue and more generally remove other weak points in the stack.

Packet schedulers using skb_get_hash_perturb() benefit from this change.

Fixes: b5677416 ("ipv6: Enable auto flow labels by default")
Fixes: 42240901 ("ipv6: Implement different admin modes for automatic flow labels")
Fixes: 67800f9b ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel")
Fixes: cb1ce2ef ("ipv6: Implement automatic flow label generation on transmit")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NJonathan Berger <jonathann1@walla.com>
Reported-by: NAmit Klein <aksecurity@gmail.com>
Reported-by: NBenny Pinkas <benny@pinkas.net>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b3060531979422d5bb18d80226f978910284dc70 ]

This device is sold as 'ThinkPad USB-C Dock Gen 2 (40AS)'.
Chipset is RTL8153 and works with r8152.
Without this, the generic cdc_ether grabs the device, and the device jam
connected networks up when the machine suspends.
Signed-off-by: NKazutoshi Noguchi <noguchi.kazutosi@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 50c7d2ba9de20f60a2d527ad6928209ef67e4cdd ]

If there are multiple switch trees on the device, only the last one
will be listed, because the arguments of list_add_tail are swapped.

Fixes: 83c0afae ("net: dsa: Add new binding implementation")
Signed-off-by: NVivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 38b4fe320119859c11b1dc06f6b4987a16344fa1 ]

As soon as the netdev is registers, the kernel can start using the
interface. If the driver connects the MAC to the PHY after the netdev
is registered, there is a race condition where the interface can be
opened without having the PHY connected.

Change the order to close this race condition.

Fixes: 92571a1a ("lan78xx: Connect phy early")
Reported-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 25382b991d252aed961cd434176240f9de6bb15f ]

The EPHY integrated into the 40nm Set-Top Box devices can falsely
detect energy when connected to a disabled peer interface. When the
peer interface is enabled the EPHY will detect and report the link
as active, but on occasion may get into a state where it is not
able to exchange data with the connected GENET MAC. This issue has
not been observed when the link parameters are auto-negotiated;
however, it has been observed with a manually configured link.

It has been empirically determined that issuing a soft reset to the
EPHY when energy is detected prevents it from getting into this bad
state.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fe586b823372a9f43f90e2c6aa0573992ce7ccb7 ]

The internal 40nm EPHYs use a "Workaround for putting the PHY in
IDDQ mode." These PHYs require a soft reset to restore functionality
after they are powered back up.

This commit defines the soft_reset function to use genphy_soft_reset
during phy_init_hw to accommodate this.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7de48402faa32298c3551ea32c76ccb4f9d3025d ]

When commit 28b2e0d2 ("net: phy: remove parameter new_link from
phy_mac_interrupt()") removed the new_link parameter it set the
phydev->link state from the MAC before invoking phy_mac_interrupt().

However, once commit 88d6272acaaa ("net: phy: avoid unneeded MDIO
reads in genphy_read_status") was added this initialization prevents
the proper determination of the connection parameters by the function
genphy_read_status().

This commit removes that initialization to restore the proper
functionality.

Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c763ac436b668d7417f0979430ec0312ede4093d ]

Clearing the existing bitmask of mirrored ports essentially prevents us
from capturing more than one port at any given time. This is clearly
wrong, do not clear the bitmask prior to setting up the new port.
Reported-by: NHubert Feurstein <h.feurstein@gmail.com>
Fixes: ed3af5fd ("net: dsa: b53: Add support for port mirroring")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 534e7366f41b0c689b01af4375aefcd1462adedf ]

Ethtool self test contains a test for link speed. This test reads the
PTYS register and determines whether the current speed is valid or not.
Change current implementation to use the function mlx5e_port_linkspeed()
that does the same check and fails when speed is invalid. This code
redundancy lead to a bug when mlx5e_port_linkspeed() was updated with
expended speeds and the self test was not.

Fixes: 2c81bfd5 ("net/mlx5e: Move port speed code from en_ethtool.c to en/port.c")
Signed-off-by: NAya Levin <ayal@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 62bdc8fd1c21d4263ebd18bec57f82532d09249f ]

As reported in [0] at least one RTL8168dp version has problems
establishing a link. This chip version has an integrated RTL8211b PHY,
however the chip seems to report a wrong PHY ID, resulting in a wrong
PHY driver (for Generic Realtek PHY) being loaded.
Work around this issue by adding a hook to r8168dp_2_mdio_read()
for returning the correct PHY ID.

[0] https://bbs.archlinux.org/viewtopic.php?id=246508

Fixes: 242cd9b5 ("r8169: use phy_resume/phy_suspend")
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9df86bdb6746d7fcfc2fda715f7a7c3d0ddb2654 ]

When CQE compression is enabled, compressed CQEs use the following
structure: a title is followed by one or many blocks, each containing 8
mini CQEs (except the last, which may contain fewer mini CQEs).

Due to NAPI budget restriction, a complete structure is not always
parsed in one NAPI run, and some blocks with mini CQEs may be deferred
to the next NAPI poll call - we have the mlx5e_decompress_cqes_cont call
in the beginning of mlx5e_poll_rx_cq. However, if the budget is
extremely low, some blocks may be left even after that, but the code
that follows the mlx5e_decompress_cqes_cont call doesn't check it and
assumes that a new CQE begins, which may not be the case. In such cases,
random memory corruptions occur.

An extremely low NAPI budget of 8 is used when busy_poll or busy_read is
active.

This commit adds a check to make sure that the previous compressed CQE
has been completely parsed after mlx5e_decompress_cqes_cont, otherwise
it prevents a new CQE from being fetched in the middle of a compressed
CQE.

This commit fixes random crashes in __build_skb, __page_pool_put_page
and other not-related-directly places, that used to happen when both CQE
compression and busy_poll/busy_read were enabled.

Fixes: 7219ab34 ("net/mlx5e: CQE compression")
Signed-off-by: NMaxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 37de3b354150450ba12275397155e68113e99901 ]

This patch adds two more tests to ipv4_addr_metric_test() to
explicitly cover the scenarios fixed by the previous patch.
Suggested-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0b834ba00ab5337e938c727e216e1f5249794717 ]

Since commit af4d768a ("net/ipv4: Add support for specifying metric
of connected routes"), when updating an IP address with a different metric,
the associated connected route is updated, too.

Still, the mentioned commit doesn't handle properly some corner cases:

$ ip addr add dev eth0 192.168.1.0/24
$ ip addr add dev eth0 192.168.2.1/32 peer 192.168.2.2
$ ip addr add dev eth0 192.168.3.1/24
$ ip addr change dev eth0 192.168.1.0/24 metric 10
$ ip addr change dev eth0 192.168.2.1/32 peer 192.168.2.2 metric 10
$ ip addr change dev eth0 192.168.3.1/24 metric 10
$ ip -4 route
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.0
192.168.2.2 dev eth0 proto kernel scope link src 192.168.2.1
192.168.3.0/24 dev eth0 proto kernel scope link src 192.168.2.1 metric 10

Only the last route is correctly updated.

The problem is the current test in fib_modify_prefix_metric():

	if (!(dev->flags & IFF_UP) ||
	    ifa->ifa_flags & (IFA_F_SECONDARY | IFA_F_NOPREFIXROUTE) ||
	    ipv4_is_zeronet(prefix) ||
	    prefix == ifa->ifa_local || ifa->ifa_prefixlen == 32)

Which should be the logical 'not' of the pre-existing test in
fib_add_ifaddr():

	if (!ipv4_is_zeronet(prefix) && !(ifa->ifa_flags & IFA_F_SECONDARY) &&
	    (prefix != addr || ifa->ifa_prefixlen < 32))

To properly negate the original expression, we need to change the last
logical 'or' to a logical 'and'.

Fixes: af4d768a ("net/ipv4: Add support for specifying metric of connected routes")
Reported-and-suggested-by: NBeniamino Galvani <bgalvani@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7c422d0ce97552dde4a97e6290de70ec6efb0fc6 ]

__skb_wait_for_more_packets() can be called while other cpus
can feed packets to the socket receive queue.

KCSAN reported :

BUG: KCSAN: data-race in __skb_wait_for_more_packets / __udp_enqueue_schedule_skb

write to 0xffff888102e40b58 of 8 bytes by interrupt on cpu 0:
 __skb_insert include/linux/skbuff.h:1852 [inline]
 __skb_queue_before include/linux/skbuff.h:1958 [inline]
 __skb_queue_tail include/linux/skbuff.h:1991 [inline]
 __udp_enqueue_schedule_skb+0x2d7/0x410 net/ipv4/udp.c:1470
 __udp_queue_rcv_skb net/ipv4/udp.c:1940 [inline]
 udp_queue_rcv_one_skb+0x7bd/0xc70 net/ipv4/udp.c:2057
 udp_queue_rcv_skb+0xb5/0x400 net/ipv4/udp.c:2074
 udp_unicast_rcv_skb.isra.0+0x7e/0x1c0 net/ipv4/udp.c:2233
 __udp4_lib_rcv+0xa44/0x17c0 net/ipv4/udp.c:2300
 udp_rcv+0x2b/0x40 net/ipv4/udp.c:2470
 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:442 [inline]
 ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955

read to 0xffff888102e40b58 of 8 bytes by task 13035 on cpu 1:
 __skb_wait_for_more_packets+0xfa/0x320 net/core/datagram.c:100
 __skb_recv_udp+0x374/0x500 net/ipv4/udp.c:1683
 udp_recvmsg+0xe1/0xb10 net/ipv4/udp.c:1712
 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
 sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
 __do_sys_recvmmsg net/socket.c:2703 [inline]
 __se_sys_recvmmsg net/socket.c:2696 [inline]
 __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 13035 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3f926af3f4d688e2e11e7f8ed04e277a14d4d4a4 ]

Busy polling usually runs without locks.
Let's use skb_queue_empty_lockless() instead of skb_queue_empty()

Also uses READ_ONCE() in __skb_try_recv_datagram() to address
a similar potential problem.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3ef7cf57c72f32f61e97f8fa401bc39ea1f1a5d4 ]

Many poll() handlers are lockless. Using skb_queue_empty_lockless()
instead of skb_queue_empty() is more appropriate.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 137a0dbe3426fd7bcfe3f8117b36a87b3590e4eb ]

syzbot reported a data-race [1].

We should use skb_queue_empty_lockless() to document that we are
not ensuring a mutual exclusion and silence KCSAN.

[1]
BUG: KCSAN: data-race in __skb_recv_udp / __udp_enqueue_schedule_skb

write to 0xffff888122474b50 of 8 bytes by interrupt on cpu 0:
 __skb_insert include/linux/skbuff.h:1852 [inline]
 __skb_queue_before include/linux/skbuff.h:1958 [inline]
 __skb_queue_tail include/linux/skbuff.h:1991 [inline]
 __udp_enqueue_schedule_skb+0x2c1/0x410 net/ipv4/udp.c:1470
 __udp_queue_rcv_skb net/ipv4/udp.c:1940 [inline]
 udp_queue_rcv_one_skb+0x7bd/0xc70 net/ipv4/udp.c:2057
 udp_queue_rcv_skb+0xb5/0x400 net/ipv4/udp.c:2074
 udp_unicast_rcv_skb.isra.0+0x7e/0x1c0 net/ipv4/udp.c:2233
 __udp4_lib_rcv+0xa44/0x17c0 net/ipv4/udp.c:2300
 udp_rcv+0x2b/0x40 net/ipv4/udp.c:2470
 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:442 [inline]
 ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955

read to 0xffff888122474b50 of 8 bytes by task 8921 on cpu 1:
 skb_queue_empty include/linux/skbuff.h:1494 [inline]
 __skb_recv_udp+0x18d/0x500 net/ipv4/udp.c:1653
 udp_recvmsg+0xe1/0xb10 net/ipv4/udp.c:1712
 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
 sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
 __do_sys_recvmmsg net/socket.c:2703 [inline]
 __se_sys_recvmmsg net/socket.c:2696 [inline]
 __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 8921 Comm: syz-executor.4 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d7d16a89350ab263484c0aa2b523dd3a234e4a80 ]

Some paths call skb_queue_empty() without holding
the queue lock. We must use a barrier in order
to not let the compiler do strange things, and avoid
KCSAN splats.

Adding a barrier in skb_queue_empty() might be overkill,
I prefer adding a new helper to clearly identify
points where the callers might be lockless. This might
help us finding real bugs.

The corresponding WRITE_ONCE() should add zero cost
for current compilers.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit eadf52cf1852196a1363044dcda22fa5d7f296f7 ]

This patch is to improve the tun_info options_len by dropping
the skb when TUNNEL_VXLAN_OPT is set but options_len is less
than vxlan_metadata. This can void a potential out-of-bounds
access on ip_tun_info.

Fixes: ee122c79 ("vxlan: Flow based tunneling")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a793183caa9afae907a0d7ddd2ffd57329369bf5 ]

KCSAN reported a data-race in udp_set_dev_scratch() [1]

The issue here is that we must not write over skb fields
if skb is shared. A similar issue has been fixed in commit
89c22d8c ("net: Fix skb csum races when peeking")

While we are at it, use a helper only dealing with
udp_skb_scratch(skb)->csum_unnecessary, as this allows
udp_set_dev_scratch() to be called once and thus inlined.

[1]
BUG: KCSAN: data-race in udp_set_dev_scratch / udpv6_recvmsg

write to 0xffff888120278317 of 1 bytes by task 10411 on cpu 1:
 udp_set_dev_scratch+0xea/0x200 net/ipv4/udp.c:1308
 __first_packet_length+0x147/0x420 net/ipv4/udp.c:1556
 first_packet_length+0x68/0x2a0 net/ipv4/udp.c:1579
 udp_poll+0xea/0x110 net/ipv4/udp.c:2720
 sock_poll+0xed/0x250 net/socket.c:1256
 vfs_poll include/linux/poll.h:90 [inline]
 do_select+0x7d0/0x1020 fs/select.c:534
 core_sys_select+0x381/0x550 fs/select.c:677
 do_pselect.constprop.0+0x11d/0x160 fs/select.c:759
 __do_sys_pselect6 fs/select.c:784 [inline]
 __se_sys_pselect6 fs/select.c:769 [inline]
 __x64_sys_pselect6+0x12e/0x170 fs/select.c:769
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffff888120278317 of 1 bytes by task 10413 on cpu 0:
 udp_skb_csum_unnecessary include/net/udp.h:358 [inline]
 udpv6_recvmsg+0x43e/0xe90 net/ipv6/udp.c:310
 inet6_recvmsg+0xbb/0x240 net/ipv6/af_inet6.c:592
 sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
 __do_sys_recvmmsg net/socket.c:2703 [inline]
 __se_sys_recvmmsg net/socket.c:2696 [inline]
 __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10413 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 2276f58a ("udp: use a separate rx queue for packet reception")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d64479a3e3f9924074ca7b50bd72fa5211dca9c1 ]

This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN)
occasionally due to the uninitialized length parameter.
Initialize it to fix this, and also use int for "test_family" to comply
with the API standard.

Fixes: d6a61f80 ("soreuseport: test mixed v4/v6 sockets")
Reported-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWei Wang <weiwan@google.com>
Cc: Craig Gallek <cgallek@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5ff223e86f5addbfae26419cbb5d61d98f6fbf7d ]

memset() the structure ethtool_wolinfo that has padded bytes
but the padded bytes have not been zeroed out.
Signed-off-by: Nzhanglin <zhang.lin16@zte.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0a29ac5bd3a988dc151c8d26910dec2557421f64 ]

lan78xx_status() will run with interrupts enabled due to the change in
ed194d136769 ("usb: core: remove local_irq_save() around ->complete()
handler"). generic_handle_irq() expects to be run with IRQs disabled.

[    4.886203] 000: irq 79 handler irq_default_primary_handler+0x0/0x8 enabled interrupts
[    4.886243] 000: WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:152 __handle_irq_event_percpu+0x154/0x168
[    4.896294] 000: Modules linked in:
[    4.896301] 000: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.6 #39
[    4.896310] 000: Hardware name: Raspberry Pi 3 Model B+ (DT)
[    4.896315] 000: pstate: 60000005 (nZCv daif -PAN -UAO)
[    4.896321] 000: pc : __handle_irq_event_percpu+0x154/0x168
[    4.896331] 000: lr : __handle_irq_event_percpu+0x154/0x168
[    4.896339] 000: sp : ffff000010003cc0
[    4.896346] 000: x29: ffff000010003cc0 x28: 0000000000000060
[    4.896355] 000: x27: ffff000011021980 x26: ffff00001189c72b
[    4.896364] 000: x25: ffff000011702bc0 x24: ffff800036d6e400
[    4.896373] 000: x23: 000000000000004f x22: ffff000010003d64
[    4.896381] 000: x21: 0000000000000000 x20: 0000000000000002
[    4.896390] 000: x19: ffff8000371c8480 x18: 0000000000000060
[    4.896398] 000: x17: 0000000000000000 x16: 00000000000000eb
[    4.896406] 000: x15: ffff000011712d18 x14: 7265746e69206465
[    4.896414] 000: x13: ffff000010003ba0 x12: ffff000011712df0
[    4.896422] 000: x11: 0000000000000001 x10: ffff000011712e08
[    4.896430] 000: x9 : 0000000000000001 x8 : 000000000003c920
[    4.896437] 000: x7 : ffff0000118cc410 x6 : ffff0000118c7f00
[    4.896445] 000: x5 : 000000000003c920 x4 : 0000000000004510
[    4.896453] 000: x3 : ffff000011712dc8 x2 : 0000000000000000
[    4.896461] 000: x1 : 73a3f67df94c1500 x0 : 0000000000000000
[    4.896466] 000: Call trace:
[    4.896471] 000:  __handle_irq_event_percpu+0x154/0x168
[    4.896481] 000:  handle_irq_event_percpu+0x50/0xb0
[    4.896489] 000:  handle_irq_event+0x40/0x98
[    4.896497] 000:  handle_simple_irq+0xa4/0xf0
[    4.896505] 000:  generic_handle_irq+0x24/0x38
[    4.896513] 000:  intr_complete+0xb0/0xe0
[    4.896525] 000:  __usb_hcd_giveback_urb+0x58/0xd8
[    4.896533] 000:  usb_giveback_urb_bh+0xd0/0x170
[    4.896539] 000:  tasklet_action_common.isra.0+0x9c/0x128
[    4.896549] 000:  tasklet_hi_action+0x24/0x30
[    4.896556] 000:  __do_softirq+0x120/0x23c
[    4.896564] 000:  irq_exit+0xb8/0xd8
[    4.896571] 000:  __handle_domain_irq+0x64/0xb8
[    4.896579] 000:  bcm2836_arm_irqchip_handle_irq+0x60/0xc0
[    4.896586] 000:  el1_irq+0xb8/0x140
[    4.896592] 000:  arch_cpu_idle+0x10/0x18
[    4.896601] 000:  do_idle+0x200/0x280
[    4.896608] 000:  cpu_startup_entry+0x20/0x28
[    4.896615] 000:  rest_init+0xb4/0xc0
[    4.896623] 000:  arch_call_rest_init+0xc/0x14
[    4.896632] 000:  start_kernel+0x454/0x480

Fixes: ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler")
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stefan Wahren <wahrenst@gmx.net>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NDaniel Wagner <dwagner@suse.de>
Tested-by: NStefan Wahren <wahrenst@gmx.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d4e4fdf9e4a27c87edb79b1478955075be141f67 ]

In rtnl_net_notifyid(), we certainly can't pass a null GFP flag to
rtnl_notify(). A GFP_KERNEL flag would be fine in most circumstances,
but there are a few paths calling rtnl_net_notifyid() from atomic
context or from RCU critical sections. The later also precludes the use
of gfp_any() as it wouldn't detect the RCU case. Also, the nlmsg_new()
call is wrong too, as it uses GFP_KERNEL unconditionally.

Therefore, we need to pass the GFP flags as parameter and propagate it
through function calls until the proper flags can be determined.

In most cases, GFP_KERNEL is fine. The exceptions are:
  * openvswitch: ovs_vport_cmd_get() and ovs_vport_cmd_dump()
    indirectly call rtnl_net_notifyid() from RCU critical section,

  * rtnetlink: rtmsg_ifinfo_build_skb() already receives GFP flags as
    parameter.

Also, in ovs_vport_cmd_build_info(), let's change the GFP flags used
by nlmsg_new(). The function is allowed to sleep, so better make the
flags consistent with the ones used in the following
ovs_vport_cmd_fill_info() call.

Found by code inspection.

Fixes: 9a963454 ("netns: notify netns id events")
Signed-off-by: NGuillaume Nault <gnault@redhat.com>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e19868efea0c103f23b4b7e986fd0a703822111f ]

Prior to this patch, the amount of counters guaranteed per VF in the
resource tracker was MLX4_VF_COUNTERS_PER_PORT * MLX4_MAX_PORTS. It was
set regardless if the VF was single or dual port.
This caused several VFs to have no guaranteed counters although the
system could satisfy their request.

The fix is to dynamically guarantee counters, based on each VF
specification.

Fixes: 9de92c60 ("net/mlx4_core: Adjust counter grant policy in the resource tracker")
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e56bd641ca61beb92b135298d5046905f920b734 ]

This is due to error in over budget processing.
When dealing with high throughput, the used buffers
that exceeds the budget is not cleaned up. In addition,
it takes a lot of cycles to clean up the used buffer,
and then the buffer where the valid data is located can take effect.
Signed-off-by: NJiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 20eb4f29b60286e0d6dc01d9c260b4bd383c58fb ]

sk_page_frag() optimizes skb_frag allocations by using per-task
skb_frag cache when it knows it's the only user.  The condition is
determined by seeing whether the socket allocation mask allows
blocking - if the allocation may block, it obviously owns the task's
context and ergo exclusively owns current->task_frag.

Unfortunately, this misses recursion through memory reclaim path.
Please take a look at the following backtrace.

 [2] RIP: 0010:tcp_sendmsg_locked+0xccf/0xe10
     ...
     tcp_sendmsg+0x27/0x40
     sock_sendmsg+0x30/0x40
     sock_xmit.isra.24+0xa1/0x170 [nbd]
     nbd_send_cmd+0x1d2/0x690 [nbd]
     nbd_queue_rq+0x1b5/0x3b0 [nbd]
     __blk_mq_try_issue_directly+0x108/0x1b0
     blk_mq_request_issue_directly+0xbd/0xe0
     blk_mq_try_issue_list_directly+0x41/0xb0
     blk_mq_sched_insert_requests+0xa2/0xe0
     blk_mq_flush_plug_list+0x205/0x2a0
     blk_flush_plug_list+0xc3/0xf0
 [1] blk_finish_plug+0x21/0x2e
     _xfs_buf_ioapply+0x313/0x460
     __xfs_buf_submit+0x67/0x220
     xfs_buf_read_map+0x113/0x1a0
     xfs_trans_read_buf_map+0xbf/0x330
     xfs_btree_read_buf_block.constprop.42+0x95/0xd0
     xfs_btree_lookup_get_block+0x95/0x170
     xfs_btree_lookup+0xcc/0x470
     xfs_bmap_del_extent_real+0x254/0x9a0
     __xfs_bunmapi+0x45c/0xab0
     xfs_bunmapi+0x15/0x30
     xfs_itruncate_extents_flags+0xca/0x250
     xfs_free_eofblocks+0x181/0x1e0
     xfs_fs_destroy_inode+0xa8/0x1b0
     destroy_inode+0x38/0x70
     dispose_list+0x35/0x50
     prune_icache_sb+0x52/0x70
     super_cache_scan+0x120/0x1a0
     do_shrink_slab+0x120/0x290
     shrink_slab+0x216/0x2b0
     shrink_node+0x1b6/0x4a0
     do_try_to_free_pages+0xc6/0x370
     try_to_free_mem_cgroup_pages+0xe3/0x1e0
     try_charge+0x29e/0x790
     mem_cgroup_charge_skmem+0x6a/0x100
     __sk_mem_raise_allocated+0x18e/0x390
     __sk_mem_schedule+0x2a/0x40
 [0] tcp_sendmsg_locked+0x8eb/0xe10
     tcp_sendmsg+0x27/0x40
     sock_sendmsg+0x30/0x40
     ___sys_sendmsg+0x26d/0x2b0
     __sys_sendmsg+0x57/0xa0
     do_syscall_64+0x42/0x100
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

In [0], tcp_send_msg_locked() was using current->page_frag when it
called sk_wmem_schedule().  It already calculated how many bytes can
be fit into current->page_frag.  Due to memory pressure,
sk_wmem_schedule() called into memory reclaim path which called into
xfs and then IO issue path.  Because the filesystem in question is
backed by nbd, the control goes back into the tcp layer - back into
tcp_sendmsg_locked().

nbd sets sk_allocation to (GFP_NOIO | __GFP_MEMALLOC) which makes
sense - it's in the process of freeing memory and wants to be able to,
e.g., drop clean pages to make forward progress.  However, this
confused sk_page_frag() called from [2].  Because it only tests
whether the allocation allows blocking which it does, it now thinks
current->page_frag can be used again although it already was being
used in [0].

After [2] used current->page_frag, the offset would be increased by
the used amount.  When the control returns to [0],
current->page_frag's offset is increased and the previously calculated
number of bytes now may overrun the end of allocated memory leading to
silent memory corruptions.

Fix it by adding gfpflags_normal_context() which tests sleepable &&
!reclaim and use it to determine whether to use current->task_frag.

v2: Eric didn't like gfp flags being tested twice.  Introduce a new
    helper gfpflags_normal_context() and combine the two tests.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 88824e3bf29a2fcacfd9ebbfe03063649f0f3254 ]

We are calling the checksum helper after the dma_map_single()
call to map the packet. This is incorrect as the checksumming
code will touch the packet from the CPU. This means the cache
won't be properly flushes (or the bounce buffering will leave
us with the unmodified packet to DMA).

This moves the calculation of the checksum & vlan tags to
before the DMA mapping.

This also has the side effect of fixing another bug: If the
checksum helper fails, we goto "drop" to drop the packet, which
will not unmap the DMA mapping.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes: 05690d63 ("ftgmac100: Upgrade to NETIF_F_HW_CSUM")
Reviewed-by: NVijay Khemka <vijaykhemka@fb.com>
Tested-by: NVijay Khemka <vijaykhemka@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5fc0f21246e50afdf318b5a3a941f7f4f57b8947 ]

Since it became possible for the DSA core to use a CPU port different
than 8, our bcm_sf2_imp_setup() function was broken because it assumes
that registers are applicable to port 8. In particular, the port's MAC
is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS
bits if we are not configured for port 8.

Fixes: 9f91484f ("net: dsa: make "label" property optional for dsa2")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ee8d153d46a3b98c064ee15c0c0a3bbf1450e5a1 ]

We already annotated most accesses to sk->sk_napi_id

We missed sk_mark_napi_id() and sk_mark_napi_id_once()
which might be called without socket lock held in UDP stack.

KCSAN reported :
BUG: KCSAN: data-race in udpv6_queue_rcv_one_skb / udpv6_queue_rcv_one_skb

write to 0xffff888121c6d108 of 4 bytes by interrupt on cpu 0:
 sk_mark_napi_id include/net/busy_poll.h:125 [inline]
 __udpv6_queue_rcv_skb net/ipv6/udp.c:571 [inline]
 udpv6_queue_rcv_one_skb+0x70c/0xb40 net/ipv6/udp.c:672
 udpv6_queue_rcv_skb+0xb5/0x400 net/ipv6/udp.c:689
 udp6_unicast_rcv_skb.isra.0+0xd7/0x180 net/ipv6/udp.c:832
 __udp6_lib_rcv+0x69c/0x1770 net/ipv6/udp.c:913
 udpv6_rcv+0x2b/0x40 net/ipv6/udp.c:1015
 ip6_protocol_deliver_rcu+0x22a/0xbe0 net/ipv6/ip6_input.c:409
 ip6_input_finish+0x30/0x50 net/ipv6/ip6_input.c:450
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip6_input+0x177/0x190 net/ipv6/ip6_input.c:459
 dst_input include/net/dst.h:442 [inline]
 ip6_rcv_finish+0x110/0x140 net/ipv6/ip6_input.c:76
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ipv6_rcv+0x1a1/0x1b0 net/ipv6/ip6_input.c:284
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955
 napi_poll net/core/dev.c:6392 [inline]
 net_rx_action+0x3ae/0xa90 net/core/dev.c:6460

write to 0xffff888121c6d108 of 4 bytes by interrupt on cpu 1:
 sk_mark_napi_id include/net/busy_poll.h:125 [inline]
 __udpv6_queue_rcv_skb net/ipv6/udp.c:571 [inline]
 udpv6_queue_rcv_one_skb+0x70c/0xb40 net/ipv6/udp.c:672
 udpv6_queue_rcv_skb+0xb5/0x400 net/ipv6/udp.c:689
 udp6_unicast_rcv_skb.isra.0+0xd7/0x180 net/ipv6/udp.c:832
 __udp6_lib_rcv+0x69c/0x1770 net/ipv6/udp.c:913
 udpv6_rcv+0x2b/0x40 net/ipv6/udp.c:1015
 ip6_protocol_deliver_rcu+0x22a/0xbe0 net/ipv6/ip6_input.c:409
 ip6_input_finish+0x30/0x50 net/ipv6/ip6_input.c:450
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip6_input+0x177/0x190 net/ipv6/ip6_input.c:459
 dst_input include/net/dst.h:442 [inline]
 ip6_rcv_finish+0x110/0x140 net/ipv6/ip6_input.c:76
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ipv6_rcv+0x1a1/0x1b0 net/ipv6/ip6_input.c:284
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 10890 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: e68b6e50 ("udp: enable busy polling for all sockets")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7170a977743b72cf3eb46ef6ef89885dc7ad3621 ]

This socket field can be read and written by concurrent cpus.

Use READ_ONCE() and WRITE_ONCE() annotations to document this,
and avoid some compiler 'optimizations'.

KCSAN reported :

BUG: KCSAN: data-race in tcp_v4_rcv / tcp_v4_rcv

write to 0xffff88812220763c of 4 bytes by interrupt on cpu 0:
 sk_incoming_cpu_update include/net/sock.h:953 [inline]
 tcp_v4_rcv+0x1b3c/0x1bb0 net/ipv4/tcp_ipv4.c:1934
 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:442 [inline]
 ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955
 napi_poll net/core/dev.c:6392 [inline]
 net_rx_action+0x3ae/0xa90 net/core/dev.c:6460
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082
 do_softirq.part.0+0x6b/0x80 kernel/softirq.c:337
 do_softirq kernel/softirq.c:329 [inline]
 __local_bh_enable_ip+0x76/0x80 kernel/softirq.c:189

read to 0xffff88812220763c of 4 bytes by interrupt on cpu 1:
 sk_incoming_cpu_update include/net/sock.h:952 [inline]
 tcp_v4_rcv+0x181a/0x1bb0 net/ipv4/tcp_ipv4.c:1934
 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
 dst_input include/net/dst.h:442 [inline]
 ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
 NF_HOOK include/linux/netfilter.h:305 [inline]
 NF_HOOK include/linux/netfilter.h:299 [inline]
 ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
 process_backlog+0x1d3/0x420 net/core/dev.c:5955
 napi_poll net/core/dev.c:6392 [inline]
 net_rx_action+0x3ae/0xa90 net/core/dev.c:6460
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
 smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>