net/mlx5e: Move port speed code from en_ethtool.c to en/port.c

Move four below functions from en_ethtool.c to en/port.c. These
functions are used by both en_ethtool.c and en_main.c. Future code
can use these functions without ethtool link mode dependency.
  u32 mlx5e_port_ptys2speed(u32 eth_proto_oper);
  int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
  int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
  u32 mlx5e_port_speed2linkmodes(u32 speed);

Delete the speed field from table mlx5e_build_ptys2ethtool_map. This
table only keeps the mapping between the mlx5e link mode and
ethtool link mode. Add new table mlx5e_link_speed for translation
from mlx5e link mode to actual speed.
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/Makefile

@@ -15,7 +15,7 @@ mlx5_core-$(CONFIG_MLX5_FPGA) += fpga/cmd.o fpga/core.o fpga/conn.o fpga/sdk.o \
 
 mlx5_core-$(CONFIG_MLX5_CORE_EN) += en_main.o en_common.o en_fs.o en_ethtool.o \
 		en_tx.o en_rx.o en_dim.o en_txrx.o en_stats.o vxlan.o \
-		en_arfs.o en_fs_ethtool.o en_selftest.o
+		en_arfs.o en_fs_ethtool.o en_selftest.o en/port.o
 
 mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o
 

drivers/net/ethernet/mellanox/mlx5/core/en.h

@@ -932,8 +932,6 @@ void mlx5e_deactivate_priv_channels(struct mlx5e_priv *priv);
 
 void mlx5e_build_default_indir_rqt(u32 *indirection_rqt, int len,
 				   int num_channels);
-int mlx5e_get_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
-
 void mlx5e_set_tx_cq_mode_params(struct mlx5e_params *params,
 				 u8 cq_period_mode);
 void mlx5e_set_rx_cq_mode_params(struct mlx5e_params *params,

drivers/net/ethernet/mellanox/mlx5/core/en/Makefile

+subdir-ccflags-y += -I$(src)/..

drivers/net/ethernet/mellanox/mlx5/core/en/port.c

+/*
+ * Copyright (c) 2018, Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "port.h"
+
+/* speed in units of 1Mb */
+static const u32 mlx5e_link_speed[MLX5E_LINK_MODES_NUMBER] = {
+	[MLX5E_1000BASE_CX_SGMII] = 1000,
+	[MLX5E_1000BASE_KX]       = 1000,
+	[MLX5E_10GBASE_CX4]       = 10000,
+	[MLX5E_10GBASE_KX4]       = 10000,
+	[MLX5E_10GBASE_KR]        = 10000,
+	[MLX5E_20GBASE_KR2]       = 20000,
+	[MLX5E_40GBASE_CR4]       = 40000,
+	[MLX5E_40GBASE_KR4]       = 40000,
+	[MLX5E_56GBASE_R4]        = 56000,
+	[MLX5E_10GBASE_CR]        = 10000,
+	[MLX5E_10GBASE_SR]        = 10000,
+	[MLX5E_10GBASE_ER]        = 10000,
+	[MLX5E_40GBASE_SR4]       = 40000,
+	[MLX5E_40GBASE_LR4]       = 40000,
+	[MLX5E_50GBASE_SR2]       = 50000,
+	[MLX5E_100GBASE_CR4]      = 100000,
+	[MLX5E_100GBASE_SR4]      = 100000,
+	[MLX5E_100GBASE_KR4]      = 100000,
+	[MLX5E_100GBASE_LR4]      = 100000,
+	[MLX5E_100BASE_TX]        = 100,
+	[MLX5E_1000BASE_T]        = 1000,
+	[MLX5E_10GBASE_T]         = 10000,
+	[MLX5E_25GBASE_CR]        = 25000,
+	[MLX5E_25GBASE_KR]        = 25000,
+	[MLX5E_25GBASE_SR]        = 25000,
+	[MLX5E_50GBASE_CR2]       = 50000,
+	[MLX5E_50GBASE_KR2]       = 50000,
+};
+
+u32 mlx5e_port_ptys2speed(u32 eth_proto_oper)
+{
+	unsigned long temp = eth_proto_oper;
+	u32 speed = 0;
+	int i;
+
+	i = find_first_bit(&temp, MLX5E_LINK_MODES_NUMBER);
+	if (i < MLX5E_LINK_MODES_NUMBER)
+		speed = mlx5e_link_speed[i];
+
+	return speed;
+}
+
+int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed)
+{
+	u32 out[MLX5_ST_SZ_DW(ptys_reg)] = {};
+	u32 eth_proto_oper;
+	int err;
+
+	err = mlx5_query_port_ptys(mdev, out, sizeof(out), MLX5_PTYS_EN, 1);
+	if (err)
+		return err;
+
+	eth_proto_oper = MLX5_GET(ptys_reg, out, eth_proto_oper);
+	*speed = mlx5e_port_ptys2speed(eth_proto_oper);
+	if (!(*speed)) {
+		mlx5_core_warn(mdev, "cannot get port speed\n");
+		err = -EINVAL;
+	}
+
+	return err;
+}
+
+int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed)
+{
+	u32 max_speed = 0;
+	u32 proto_cap;
+	int err;
+	int i;
+
+	err = mlx5_query_port_proto_cap(mdev, &proto_cap, MLX5_PTYS_EN);
+	if (err)
+		return err;
+
+	for (i = 0; i < MLX5E_LINK_MODES_NUMBER; ++i)
+		if (proto_cap & MLX5E_PROT_MASK(i))
+			max_speed = max(max_speed, mlx5e_link_speed[i]);
+
+	*speed = max_speed;
+	return 0;
+}
+
+u32 mlx5e_port_speed2linkmodes(u32 speed)
+{
+	u32 link_modes = 0;
+	int i;
+
+	for (i = 0; i < MLX5E_LINK_MODES_NUMBER; ++i) {
+		if (mlx5e_link_speed[i] == speed)
+			link_modes |= MLX5E_PROT_MASK(i);
+	}
+
+	return link_modes;
+}

drivers/net/ethernet/mellanox/mlx5/core/en/port.h

+/*
+ * Copyright (c) 2018, Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __MLX5E_EN_PORT_H
+#define __MLX5E_EN_PORT_H
+
+#include <linux/mlx5/driver.h>
+#include "en.h"
+
+u32 mlx5e_port_ptys2speed(u32 eth_proto_oper);
+int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
+int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
+u32 mlx5e_port_speed2linkmodes(u32 speed);
+#endif

drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c

@@ -31,6 +31,7 @@
  */
 
 #include "en.h"
+#include "en/port.h"
 
 void mlx5e_ethtool_get_drvinfo(struct mlx5e_priv *priv,
 			       struct ethtool_drvinfo *drvinfo)
@@ -59,18 +60,16 @@ static void mlx5e_get_drvinfo(struct net_device *dev,
 struct ptys2ethtool_config {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertised);
-	u32 speed;
 };
 
 static struct ptys2ethtool_config ptys2ethtool_table[MLX5E_LINK_MODES_NUMBER];
 
-#define MLX5_BUILD_PTYS2ETHTOOL_CONFIG(reg_, speed_, ...)               \
+#define MLX5_BUILD_PTYS2ETHTOOL_CONFIG(reg_, ...)                       \
 	({                                                              \
 		struct ptys2ethtool_config *cfg;                        \
 		const unsigned int modes[] = { __VA_ARGS__ };           \
 		unsigned int i;                                         \
 		cfg = &ptys2ethtool_table[reg_];                        \
-		cfg->speed = speed_;                                    \
 		bitmap_zero(cfg->supported,                             \
 			    __ETHTOOL_LINK_MODE_MASK_NBITS);            \
 		bitmap_zero(cfg->advertised,                            \
@@ -83,55 +82,55 @@ static struct ptys2ethtool_config ptys2ethtool_table[MLX5E_LINK_MODES_NUMBER];
 
 void mlx5e_build_ptys2ethtool_map(void)
 {
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_1000BASE_CX_SGMII, SPEED_1000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_1000BASE_CX_SGMII,
 				       ETHTOOL_LINK_MODE_1000baseKX_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_1000BASE_KX, SPEED_1000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_1000BASE_KX,
 				       ETHTOOL_LINK_MODE_1000baseKX_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_CX4, SPEED_10000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_CX4,
 				       ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_KX4, SPEED_10000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_KX4,
 				       ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_KR, SPEED_10000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_KR,
 				       ETHTOOL_LINK_MODE_10000baseKR_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_20GBASE_KR2, SPEED_20000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_20GBASE_KR2,
 				       ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_40GBASE_CR4, SPEED_40000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_40GBASE_CR4,
 				       ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_40GBASE_KR4, SPEED_40000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_40GBASE_KR4,
 				       ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_56GBASE_R4, SPEED_56000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_56GBASE_R4,
 				       ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_CR, SPEED_10000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_CR,
 				       ETHTOOL_LINK_MODE_10000baseKR_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_SR, SPEED_10000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_SR,
 				       ETHTOOL_LINK_MODE_10000baseKR_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_ER, SPEED_10000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_ER,
 				       ETHTOOL_LINK_MODE_10000baseKR_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_40GBASE_SR4, SPEED_40000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_40GBASE_SR4,
 				       ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_40GBASE_LR4, SPEED_40000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_40GBASE_LR4,
 				       ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_50GBASE_SR2, SPEED_50000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_50GBASE_SR2,
 				       ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_100GBASE_CR4, SPEED_100000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_100GBASE_CR4,
 				       ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_100GBASE_SR4, SPEED_100000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_100GBASE_SR4,
 				       ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_100GBASE_KR4, SPEED_100000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_100GBASE_KR4,
 				       ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_100GBASE_LR4, SPEED_100000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_100GBASE_LR4,
 				       ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_T, SPEED_10000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_T,
 				       ETHTOOL_LINK_MODE_10000baseT_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_25GBASE_CR, SPEED_25000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_25GBASE_CR,
 				       ETHTOOL_LINK_MODE_25000baseCR_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_25GBASE_KR, SPEED_25000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_25GBASE_KR,
 				       ETHTOOL_LINK_MODE_25000baseKR_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_25GBASE_SR, SPEED_25000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_25GBASE_SR,
 				       ETHTOOL_LINK_MODE_25000baseSR_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_50GBASE_CR2, SPEED_50000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_50GBASE_CR2,
 				       ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT);
-	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_50GBASE_KR2, SPEED_50000,
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_50GBASE_KR2,
 				       ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT);
 }
 
@@ -617,43 +616,24 @@ static void ptys2ethtool_supported_advertised_port(struct ethtool_link_ksettings
 	}
 }
 
-int mlx5e_get_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed)
-{
-	u32 max_speed = 0;
-	u32 proto_cap;
-	int err;
-	int i;
-
-	err = mlx5_query_port_proto_cap(mdev, &proto_cap, MLX5_PTYS_EN);
-	if (err)
-		return err;
-
-	for (i = 0; i < MLX5E_LINK_MODES_NUMBER; ++i)
-		if (proto_cap & MLX5E_PROT_MASK(i))
-			max_speed = max(max_speed, ptys2ethtool_table[i].speed);
-
-	*speed = max_speed;
-	return 0;
-}
-
 static void get_speed_duplex(struct net_device *netdev,
 			     u32 eth_proto_oper,
 			     struct ethtool_link_ksettings *link_ksettings)
 {
-	int i;
 	u32 speed = SPEED_UNKNOWN;
 	u8 duplex = DUPLEX_UNKNOWN;
 
 	if (!netif_carrier_ok(netdev))
 		goto out;
 
-	for (i = 0; i < MLX5E_LINK_MODES_NUMBER; ++i) {
-		if (eth_proto_oper & MLX5E_PROT_MASK(i)) {
-			speed = ptys2ethtool_table[i].speed;
-			duplex = DUPLEX_FULL;
-			break;
-		}
+	speed = mlx5e_port_ptys2speed(eth_proto_oper);
+	if (!speed) {
+		speed = SPEED_UNKNOWN;
+		goto out;
 	}
+
+	duplex = DUPLEX_FULL;
+
 out:
 	link_ksettings->base.speed = speed;
 	link_ksettings->base.duplex = duplex;
@@ -811,18 +791,6 @@ static u32 mlx5e_ethtool2ptys_adver_link(const unsigned long *link_modes)
 	return ptys_modes;
 }
 
-static u32 mlx5e_ethtool2ptys_speed_link(u32 speed)
-{
-	u32 i, speed_links = 0;
-
-	for (i = 0; i < MLX5E_LINK_MODES_NUMBER; ++i) {
-		if (ptys2ethtool_table[i].speed == speed)
-			speed_links |= MLX5E_PROT_MASK(i);
-	}
-
-	return speed_links;
-}
-
 static int mlx5e_set_link_ksettings(struct net_device *netdev,
 				    const struct ethtool_link_ksettings *link_ksettings)
 {
@@ -842,7 +810,7 @@ static int mlx5e_set_link_ksettings(struct net_device *netdev,
 
 	link_modes = link_ksettings->base.autoneg == AUTONEG_ENABLE ?
 		mlx5e_ethtool2ptys_adver_link(link_ksettings->link_modes.advertising) :
-		mlx5e_ethtool2ptys_speed_link(speed);
+		mlx5e_port_speed2linkmodes(speed);
 
 	err = mlx5_query_port_proto_cap(mdev, &eth_proto_cap, MLX5_PTYS_EN);
 	if (err) {

drivers/net/ethernet/mellanox/mlx5/core/en_main.c

@@ -46,6 +46,7 @@
 #include "accel/ipsec.h"
 #include "accel/tls.h"
 #include "vxlan.h"
+#include "en/port.h"
 
 struct mlx5e_rq_param {
 	u32			rqc[MLX5_ST_SZ_DW(rqc)];
@@ -4082,7 +4083,7 @@ static bool slow_pci_heuristic(struct mlx5_core_dev *mdev)
 	u32 link_speed = 0;
 	u32 pci_bw = 0;
 
-	mlx5e_get_max_linkspeed(mdev, &link_speed);
+	mlx5e_port_max_linkspeed(mdev, &link_speed);
 	pci_bw = pcie_bandwidth_available(mdev->pdev, NULL, NULL, NULL);
 	mlx5_core_dbg_once(mdev, "Max link speed = %d, PCI BW = %d\n",
 			   link_speed, pci_bw);

drivers/net/ethernet/mellanox/mlx5/core/en_tc.c

@@ -52,6 +52,7 @@
 #include "eswitch.h"
 #include "vxlan.h"
 #include "fs_core.h"
+#include "en/port.h"
 
 struct mlx5_nic_flow_attr {
 	u32 action;
@@ -613,7 +614,7 @@ static int mlx5e_hairpin_flow_add(struct mlx5e_priv *priv,
 
 	params.q_counter = priv->q_counter;
 	/* set hairpin pair per each 50Gbs share of the link */
-	mlx5e_get_max_linkspeed(priv->mdev, &link_speed);
+	mlx5e_port_max_linkspeed(priv->mdev, &link_speed);
 	link_speed = max_t(u32, link_speed, 50000);
 	link_speed64 = link_speed;
 	do_div(link_speed64, 50000);