- 07 7月, 2014 1 次提交
-
-
由 Thierry Reding 提交于
The max98090_{suspend,resume}() functions are used for system sleep and therefore need to be guarded by CONFIG_PM_SLEEP rather than CONFIG_PM. Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 05 7月, 2014 2 次提交
-
-
由 Tushar Behera 提交于
max98090_handle_pdata() is not doing anything other than printing a message if pdata is not valid. This can be removed. Signed-off-by: NTushar Behera <tushar.b@samsung.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Tushar Behera 提交于
CODEC type (MAX98090/MAX98091) can be specified from device-tree file, it can also be obtained from the CODEC during runtime. Add an explicit check to figure out if both are matching, else print a message warning about the same. Signed-off-by: NTushar Behera <tushar.b@samsung.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 01 7月, 2014 1 次提交
-
-
由 Wonjoon Lee 提交于
The MAX98091 CODEC is the same as MAX98090 CODEC, but with an extra microphone. Existing driver for MAX98090 CODEC already has support for MAX98091 CODEC. Adding proper compatible string so that MAX98091 CODEC can be specified from device tree. Signed-off-by: NWonjoon Lee <woojoo.lee@samsung.com> Signed-off-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NTushar Behera <tushar.b@samsung.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 19 6月, 2014 2 次提交
-
-
由 Jarkko Nikula 提交于
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
max98090.c doesn't free the threaded interrupt it requests. This causes an oops when doing "cat /proc/interrupts" after snd-soc-max98090.ko is unloaded. Fix this by requesting the interrupt by using devm_request_threaded_irq(). Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Stable <stable@vger.kernel.org> # 3.10+ Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 26 5月, 2014 2 次提交
-
-
由 Tushar Behera 提交于
If master clock is provided through device tree, then update the master clock frequency during set_sysclk. Documentation has been updated to reflect the change. Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Chen Zhen 提交于
This patch adds the clock divisor and multiplier NI, MI values for audio sampling frequencies 44100 and 48000 Hz and PCLK 19.2 MHz. This is useful for the Odroid X2/U2 boards when the codec works in master mode and its MCLK clock is fed from the I2S CDCLK output. Signed-off-by: NChen Zhen <zhen1.chen@samsung.com> [s.nawrocki@samsung.com: edited the commit description] Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 17 5月, 2014 7 次提交
-
-
由 Jarkko Nikula 提交于
Microphone bias level configuration register can configure voltage between 2.2 V and 2.8 V but doesn't manage is voltage on or off. Microphone bias on/off state is controlled by "MICBIAS" DAPM widget. Therefore there is no need to update bias voltage conditionally depending on jack state each time when codec goes to SND_SOC_BIAS_ON state and setting can be moved to max98090_probe() as driver currently doesn't support other levels than 2.8 V. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
BCL is being configured in two places producing a warning message. Make sure we only configure BCLK once and when we are master. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jarkko Nikula 提交于
Add ACPI ID for MAX98090 and ACPI 5 I2C device probing support. Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Make sure the cache is fully flushed at resume time. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Make sure we reset codec and clear any IRQs on resume. This matches the init sequence in probe. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Liam Girdwood 提交于
Reset needs to wait 20ms before other codec IO is performed. This wait was not being performed. Fix this by making sure the reset register is not restored with the cache, but use the manual reset method in resume with the wait. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
由 Liam Girdwood 提交于
TLV for digital sidetone volume is wrong, this fix matches it to the datasheet. Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 15 4月, 2014 3 次提交
-
-
由 Lars-Peter Clausen 提交于
SND_SOC_DAPM_VIRT_MUX and SOC_DAPM_ENUM_VIRT are deprecated and merely an alias for SND_SOC_DAPM_MUX and SOC_DAPM_ENUM. Replace the deprecated macros so we can eventually remove their definition. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Sachin Kamat 提交于
of_match_ptr is defined in of.h. Include it explicitly. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
For CODEC controls snd_kcontrol_chip() currently returns a pointer to the CODEC that registered the control. With the upcoming consolidation of platform and CODEC controls this will change. Prepare for this by introducing the snd_soc_kcontrol_codec() helper function that will hide the implementation details of how the CODEC for a control can be obtained. This will allow us to change this easily in the future. The patch also updates all CODEC drivers to use the new helper function. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 01 4月, 2014 1 次提交
-
-
由 Stephen Warren 提交于
Add a device tree match table. This serves to make the driver's support of device tree more explicit. Perhaps the fallback for DT matching to using the i2c_device_id table will go away one day, since it fails in face of devices from different vendors with the same name. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 15 3月, 2014 1 次提交
-
-
由 Lars-Peter Clausen 提交于
The driver assigns a value to the control_data field of the driver's state struct, but never reads it again. Which means it is unused and can be removed. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 11 3月, 2014 1 次提交
-
-
由 Xiubo Li 提交于
For some CODEC drivers like who act as the MFDs children are ignored by this patch. Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 01 3月, 2014 1 次提交
-
-
由 Lars-Peter Clausen 提交于
For the upcoming consolidation for MUXs and virtual MUXs we need to mark virtual enums as such. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 20 2月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
Just replace with the helper macro. No functional change at all. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 16 2月, 2014 1 次提交
-
-
由 Stephen Warren 提交于
The REVISION_ID register is not currently marked readable. snd_soc_read() refuses to read the register, and hence probe() fails. Fixes: d4807ad2 ("regmap: Check readable regs in _regmap_read") [exposed the bug, by checking for readability] Fixes: 685e4215 ("ASoC: Replace max98090 Device Driver") [left out this register from the readable list] Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 13 2月, 2014 1 次提交
-
-
由 Dylan Reid 提交于
Sync regcache when entering STANDBY from OFF. ON isn't entered with OFF as the current state, so the registers were not being re-synced after suspend/resume. The 98088 and 98095 already call regcache_sync from STANDBY. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
- 13 1月, 2014 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 19 7月, 2013 1 次提交
-
-
由 Mark Brown 提交于
None of the delayed work the driver schedules has particularly short delays and it is not performance sensitive so let the scheduler run it wherever is most efficient rather than in a per CPU workqueue by using the system power efficient workqueue. Signed-off-by: NMark Brown <broonie@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
-
- 06 6月, 2013 1 次提交
-
-
由 Mark Brown 提交于
Otherwise the functions will be defined but unreferenced when runtime PM is disabled, generating warnings. Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 20 5月, 2013 1 次提交
-
-
由 Andrew Bresticker 提交于
request_threaded_irq() rejects calls which both do not specify a handler (indicating that the primary IRQ handler should be used) and do not set IRQF_ONESHOT because the combination is unsafe with level-triggered interrupts. It is safe in this case, though, since max98090 IRQs are edge-triggered and the interrupts aren't ACK'ed until the codec's IRQ status register is read. Because of this, an IRQF_ONESHOT interrupt doesn't really make a difference, but request one anyway in order to make request_threaded_irq() happy. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 17 5月, 2013 1 次提交
-
-
由 Andrew Bresticker 提交于
The max98090 driver currently treats the digital mic enable as a supply on the record path, causing the digital mic enable to always be turned on when attempting to record. This is incorrect, however, since the digital mic enable is also a mux control where 0 selects the ADC output as input to the record-path DSP and 1 selects the digital mic. This patch adds a virtual DMIC mux to the reocrd path so that we can switch between the ADC and the digital mic for recording. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 3月, 2013 1 次提交
-
-
由 Joe Perches 提交于
Source files shouldn't have the executable bit set. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 3月, 2013 5 次提交
-
-
由 Sachin Kamat 提交于
Braces are not required for single line statements. Silences the following checkpatch warnings: WARNING: braces {} are not necessary for single statement blocks. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sachin Kamat 提交于
Fixes the following type of checkpatch errors: ERROR: "foo * bar" should be "foo *bar" Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sachin Kamat 提交于
Silences the following checkpatch warning: WARNING: struct dev_pm_ops should normally be const. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sachin Kamat 提交于
devm_regmap_init_i2c() is device managed and makes error handling and code cleanup simpler. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sachin Kamat 提交于
version.h header file inclusion is not required as detected by versioncheck. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 2月, 2013 2 次提交
-
-
由 Jerry Wong 提交于
This patch completes the replacement of the existing max98090 driver, by installing a more complete driver. Signed-off-by: NJerry Wong <jerry.wong@maximintegrated.com> Tested-by: NMatthew Mowdy <matthew.mowdy@maximintegrated.com> Reviewed-by: NRalph Birt <ralph.birt@maximintegrated.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jerry Wong 提交于
This patch removes the existing max98090 driver prior to installing a more complete one. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 21 11月, 2012 1 次提交
-
-
由 Kuninori Morimoto 提交于
This patch adds the max98090 codec prototype driver. It supports Headphone only at this point. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-