Since we pass the port number through file private data for debugfs we cast
it to and from a pointer so use uintptr_t in order to ensure that the
types are compatible, avoiding warnings on 64 bit platforms where pointers
are 64 bit and unsigned integers 32 bit.
Signed-off-by: NMark Brown <broonie@linaro.org>

In order to be able to use simple-card with McASP on TI SoC based boards we
need to be able to select the McASP via menuconfig.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

sound/soc/fsl/fsl_asrc.c:250 fsl_asrc_config_pair()
	warn: variable dereferenced before check 'config' (see line 243)

git remote add next git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
git remote update next
git checkout 3117bb31
vim +/config +250 sound/soc/fsl/fsl_asrc.c

  237   */
  238  static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
  239  {
  240   struct asrc_config *config = pair->config;
  241   struct fsl_asrc *asrc_priv = pair->asrc_priv;
  242   enum asrc_pair_index index = pair->index;
 @243   u32 inrate = config->input_sample_rate, indiv;
  244   u32 outrate = config->output_sample_rate, outdiv;
  245   bool ideal = config->inclk == INCLK_NONE;
  246   u32 clk_index[2], div[2];
  247   int in, out, channels;
  248   struct clk *clk;
  249
 @250   if (!config) {
  251           pair_err("invalid pair config\n");
  252           return -EINVAL;
  253   }
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The patch 3117bb31: "ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and
platform drivers" from Jul 29, 2014, leads to the following Smatch
complaint:

sound/soc/fsl/fsl_asrc_dma.c:304 fsl_asrc_dma_shutdown()
warn: variable dereferenced before check 'pair' (see line 302)

sound/soc/fsl/fsl_asrc_dma.c
301          struct fsl_asrc_pair *pair = runtime->private_data;
302          struct fsl_asrc *asrc_priv = pair->asrc_priv;
                                          ^^^^^^^^^^^^^^^
                                            Dereference.

303
304          if (pair && asrc_priv->pair[pair->index] == pair)
                 ^^^^
                Check.

305                  asrc_priv->pair[pair->index] = NULL;
306

So we just let the driver check pair before using it.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Negating ADAU1977_BLOCK_POWER_SAI_LDO_EN creates an unsigned long constant
with all bits set which on 64 bit architectures needs to be truncated to
an unsigned int, generating a warning. Add an explicit cast since we know
this is OK.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>

Since SOC_ENUM_SINGLE_DECL() includes a const as part of the macro adding
an explicit const in the source is duplication and causes sparse to warn.
Remove the extra consts.
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NMark Brown <broonie@linaro.org>

Only update the stream when the IPC message type matches stream type.
Signed-off-by: NPaweł Piskorski <pawel.piskorski@intel.com>
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Make sure we dont issue IPC when we are processing a response.
Signed-off-by: NPaweł Piskorski <pawel.piskorski@intel.com>
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This fixes a bug where we dont delete the current message when an
IPC message timeout occurs.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add dependency to DW_DMAC for broadwell machine, which
have built in DW dma engines.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

DVC can control Mute.
This patch supports it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

DVC can use Volume and Mute control,
and these control methods doesn't have much difference.
This patch cleanup current method,
and it will be used for Mute control.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NMark Brown <broonie@linaro.org>

The CODEC doesn't care how data is laid out in memory.
Signed-off-by: NMark Brown <broonie@linaro.org>

In current R-Car rsnd driver,
the SND_SOC_DAIFMT_xB_xF flags are used to HW default behavior,
but, it should be used to specific format.
The waveforms of LEFT_J/RIGHT_J format with
SND_SOC_DAIFMT_NB_NF flag will be
started from "falling edge" without this patch.
But, it should be started from "rising edge".
Reported-by: NJun Watanabe <jun.watanabe.ue@renesas.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NMark Brown <broonie@linaro.org>

DPCM needs extra dapm routes in the machine driver to route audio
between Front-End and Back-End. In order to differ the stream names
in the route map from CODECs, we here add specific stream names to
SSI driver so that we can implement ASRC via DPCM to it.
Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com>
Acked-by: NTimur Tabi <timur@tabi.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

DPCM needs extra dapm routes in the machine driver to route audio
between Front-End and Back-End. In order to differ the stream names
in the route map from CODECs, we here add specific stream names to
SPDIF driver so that we can implement ASRC via DPCM to it.
Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

DPCM needs extra dapm routes in the machine driver to route audio
between Front-End and Back-End. In order to differ the stream names
in the route map from CODECs, we here add specific stream names to
SAI driver so that we can implement ASRC via DPCM to it.
Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

DPCM needs extra dapm routes in the machine driver to route audio
between Front-End and Back-End. In order to differ the stream names
in the route map from CODECs, we here add specific stream names to
ESAI driver so that we can implement ASRC via DPCM to it.
Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

snd_soc_open() will trigger pm_runtime resume() which will then enable
the regulator and initialization. So we should make sure the MCLK is
enabled before this resume().

Previously we let the machine driver get the clock and enable it in
its probe(). However, considering about power saving, it'll be better
to enable it when it's going to be used and disable it after using.

So this patch just simply adds clk_get() and clk_enable() to WM8962
driver. Meanwhile, it marks clock pointer to NULL if no clock assigned
to it so it will not break any current function.
Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

bff58ea4
(ASoC: rsnd: add DVC support) added DVC support,
and it added pcm_new callback feature for it.
Then it called all DAI's pcm_new callback, and it was wrong.
This patch fixup it and call correct callback.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

b8c63786
(ASoC: rsnd: use regmap_mmio instead of original regmap bus)
used regmap_mmio and modified dev_dbg() for rsnd_read/write().
But rsnd_bset() is missing it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

R-Car sound uses Audio Local Bus which uses Lch/Rch format.
This bus is used if driver uses BUSIF.
But sound data is written as Rch/Lch format in register.
This means Rch <-> Lch will be inverted.
SSIU :: BUSIF_DALIGN is used to controlling data format.
Reported-by: NJun Watanabe <jun.watanabe.ue@renesas.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Driver should care more detail of SRC_BSDSR settings.
The sound includes noise without this patch
if it used SRC.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

There is a small memory leak if probe() fails.

Fixes: 2023c90c ('ASoC: pxa: pxa-ssp: add DT bindings')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

There is a cut and paste bug so it returns success instead of the error
code.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

reproduce: make C=1 CF=-D__CHECK_ENDIAN__

sparse warnings: (new ones prefixed by >>)

>> sound/soc/fsl/fsl_asrc.c:563:28: sparse: restricted snd_pcm_format_t degrades to integer
>> sound/soc/fsl/fsl_asrc.c:570:28: sparse: restricted snd_pcm_format_t degrades to integer

vim +563 sound/soc/fsl/fsl_asrc.c

  557          .probe = fsl_asrc_dai_probe,
  558          .playback = {
  559                  .stream_name = "ASRC-Playback",
  560                  .channels_min = 1,
  561                  .channels_max = 10,
  562                  .rates = FSL_ASRC_RATES,
> 563                  .formats = FSL_ASRC_FORMATS,
  564          },
  565          .capture = {
  566                  .stream_name = "ASRC-Capture",
  567                  .channels_min = 1,
  568                  .channels_max = 10,
  569                  .rates = FSL_ASRC_RATES,
> 570                  .formats = FSL_ASRC_FORMATS,
  571          },
  572          .ops = &fsl_asrc_dai_ops,
  573  };
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Platform data may be null during platform_device_add. Allocate platform
data before using.
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The CODEC doesn't care how data is laid out in memory.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>

The CODEC doesn't care how data is laid out in memory.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>

The CODEC doesn't care how data is laid out in memory.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>

The CODEC doesn't care how data is laid out in memory.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>

The CODEC doesn't care how data is laid out in memory.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>

The CODEC doesn't care how data is laid out in memory.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>

The CODEC doesn't care how data is laid out in memory.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>

The CODEC doesn't care how data is laid out in memory.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>

The CODEC doesn't care how data is laid out in memory.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>