Since it was introduced in commit da8d02d1 ("arm64/capabilities:
Make use of system wide safe value"), __raw_read_system_reg() has
erroneously mapped some sysreg IDs to other registers.

For the fields in ID_ISAR5_EL1, our local feature detection will be
erroneous. We may spuriously detect that a feature is uniformly
supported, or may fail to detect when it actually is, meaning some
compat hwcaps may be erroneous (or not enforced upon hotplug).

This patch corrects the erroneous entries.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Fixes: da8d02d1 ("arm64/capabilities: Make use of system wide safe value")
Reported-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Instead of open-coding the loop, let's use canned macro.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

During a TLB invalidate sequence targeting the inner shareable domain,
Falkor may prematurely complete the DSB before all loads and stores using
the old translation are observed. Instruction fetches are not subject to
the conditions of this erratum. If the original code sequence includes
multiple TLB invalidate instructions followed by a single DSB, onle one of
the TLB instructions needs to be repeated to work around this erratum.
While the erratum only applies to cases in which the TLBI specifies the
inner-shareable domain (*IS form of TLBI) and the DSB is ISH form or
stronger (OSH, SYS), this changes applies the workaround overabundantly--
to local TLBI, DSB NSH sequences as well--for simplicity.

Based on work by Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: NChristopher Covington <cov@codeaurora.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

If an EL0 instruction in the SYS class triggers an exception, do_sysintr
looks for a sys64_hook matching the instruction, and if none is found,
injects a SIGILL. This mirrors what we do for undefined instruction
encodings in do_undefinstr, where we look for an undef_hook matching the
instruction, and if none is found, inject a SIGILL.

Over time, new SYS instruction encodings may be allocated. Prior to
allocation, exceptions resulting from these would be handled by
do_undefinstr, whereas after allocation these may be handled by
do_sysintr.

To ensure that we have consistent behaviour if and when this happens, it
would be beneficial to have do_sysinstr fall back to do_undefinstr.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NSuzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Memory regions marked as NOMAP should not be used for general allocation
by the kernel, and should not even be covered by the linear mapping
(hence the name). However, drivers or other subsystems (such as ACPI)
that access the firmware directly may legally access them, which means
it is also reasonable for such drivers to claim them by invoking
request_resource(). Currently, this is prevented by the fact that arm64's
request_standard_resources() marks reserved regions as IORESOURCE_BUSY.

So drop the IORESOURCE_BUSY flag from these requests.
Reported-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

If CONFIG_DEBUG_VIRTUAL=y and CONFIG_ARM64_SW_TTBR0_PAN=y:

    virt_to_phys used for non-linear address: ffffff8008cc0000 (empty_zero_page+0x0/0x1000)
    WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:14 __virt_to_phys+0x28/0x60
    ...
    [<ffffff800809abb4>] __virt_to_phys+0x28/0x60
    [<ffffff8008a02600>] setup_arch+0x46c/0x4d4

Fixes: 2077be67 ("arm64: Use __pa_symbol for kernel symbols")
Acked-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Some places in the kernel open-code sequences using ADRP for a symbol
another instruction using a :lo12: relocation for that same symbol.
These sequences are easy to get wrong, and more painful to read than is
necessary. For these reasons, it is preferable to use the
{adr,ldr,str}_l macros for these cases.

This patch makes use of these in entry-ftrace.S, removing open-coded
sequences using adrp. This results in a minor code change, since a
temporary register is not used when generating the address for some
symbols, but this is fine, as the value of the temporary register is not
used elsewhere.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Some places in the kernel open-code sequences using ADRP for a symbol
another instruction using a :lo12: relocation for that same symbol.
These sequences are easy to get wrong, and more painful to read than is
necessary. For these reasons, it is preferable to use the
{adr,ldr,str}_l macros for these cases.

This patch makes use of these in efi-entry.S, removing open-coded
sequences using adrp.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Some places in the kernel open-code sequences using ADRP for a symbol
another instruction using a :lo12: relocation for that same symbol.
These sequences are easy to get wrong, and more painful to read than is
necessary. For these reasons, it is preferable to use the
{adr,ldr,str}_l macros for these cases.

This patch makes use of adr_l these in head.S, removing an open-coded
sequence using adrp.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The cache hierarchy can be identified through Cache Level ID(CLIDR)
architected system register. However in some cases it will provide
only the number of cache levels that are integrated into the processor
itself. In other words, it can't provide any information about the
caches that are external and/or transparent.

Some platforms require to export the information about all such external
caches to the userspace applications via the sysfs interface.

This patch adds support to override the cache levels using device tree
to take such external non-architected caches into account.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Tested-by: NTan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Definition of cpu ranges are hard to read if the cpu variant is not
zero. Provide MIDR_CPU_VAR_REV() macro to describe the full hardware
revision of a cpu including variant and (minor) revision.
Signed-off-by: NRobert Richter <rrichter@cavium.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

ARM v8.1 extensions include support for rounding double multiply
add/subtract instructions to the A64 SIMD instructions set. Let
the userspace know about it via a HWCAP bit.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

__pa_symbol is technically the marcro that should be used for kernel
symbols. Switch to this as a pre-requisite for DEBUG_VIRTUAL which
will do bounds checking.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Documentation for the infrastructure to expose CPU feature
register by emulating MRS.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch adds the hook for emulating MRS instruction to
export the 'user visible' value of supported system registers.
We emulate only the following id space for system registers:

 Op0=3, Op1=0, CRn=0, CRm=[0, 4-7]

The rest will fall back to SIGILL. This capability is also
advertised via a new HWCAP_CPUID.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
[will: add missing static keyword to enable_mrs_emulation]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Track the user visible fields of a CPU feature register. This will be
used for exposing the value to the userspace. All the user visible
fields of a feature register will be passed on as it is, while the
others would be filled with their respective safe value.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Add a helper to extract the register field from a given
instruction.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch does the following clean ups :

1) All undescribed fields of a register are now treated as 'strict'
   with a safe value of 0. Hence we could leave an empty table for
   describing registers which are RAZ.

2) ID_AA64DFR1_EL1 is RAZ and should use the table for RAZ register.

3) ftr_generic32 is used to represent a register with a 32bit feature
   value. Rename this to ftr_singl32 to make it more obvious. Since
   we don't have a 64bit singe feature register, kill ftr_generic.

Based on a patch by Mark Rutland.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

We currently have some RAZ fields described explicitly in our
arm64_ftr_bits arrays. These are inconsistently commented, grouped,
and/or applied, and maintaining these is error-prone.

Luckily, we don't need these at all. We'll never need to inspect RAZ
fields to determine feature support, and init_cpu_ftr_reg() will ensure
that any bits without a corresponding arm64_ftr_bits entry are treated
as RES0 with strict matching requirements. In check_update_ftr_reg()
we'll then compare these bits from the relevant cpuinfo_arm64
structures, and need not store them in a arm64_ftr_reg.

This patch removes the unnecessary arm64_ftr_bits entries for RES0 bits.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Any fields not defined in an arm64_ftr_bits entry are propagated to the
system-wide register value in init_cpu_ftr_reg(), and while we require
that these strictly match for the sanity checks, we don't update them in
update_cpu_ftr_reg().

Generally, the lack of an arm64_ftr_bits entry indicates that the bits
are currently RES0 (as is the case for the upper 32 bits of all
supposedly 32-bit registers).

A better default would be to use zero for the system-wide value of
unallocated bits, making all register checking consistent, and allowing
for subsequent simplifications to the arm64_ftr_bits arrays.

This patch updates init_cpu_ftr_reg() to treat unallocated bits as RES0
for the purpose of the system-wide safe value. These bits will still be
sanity checked with strict match requirements, as is currently the case.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The statistical profiling extension (SPE) is an optional feature of
ARMv8.1 and is unlikely to be supported by all of the CPUs in a
heterogeneous system.

This patch updates the cpufeature checks so that such systems are not
tainted as unsupported.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NSuzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Perf already supports multiple PMU instances for heterogeneous systems,
so there's no need to be strict in the cpufeature checking, particularly
as the PMU extension is optional in the architecture.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Since its introduction, the UAO enable call was broken, and useless.
commit 2a6dcb2b ("arm64: cpufeature: Schedule enable() calls instead
of calling them via IPI"), fixed the framework so that these calls
are scheduled, so that they can modify PSTATE.

Now it is just useless. Remove it. UAO is enabled by the code patching
which causes get_user() and friends to use the 'ldtr' family of
instructions. This relies on the PSTATE.UAO bit being set to match
addr_limit, which we do in uao_thread_switch() called via __switch_to().

All that is needed to enable UAO is patch the code, and call schedule().
__apply_alternatives_multi_stop() calls stop_machine() when it modifies
the kernel text to enable the alternatives, (including the UAO code in
uao_thread_switch()). Once stop_machine() has finished __switch_to() is
called to reschedule the original task, this causes PSTATE.UAO to be set
appropriately. An explicit enable() call is not needed.
Reported-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NJames Morse <james.morse@arm.com>

In commit 23c8a500 ("arm64: kernel: use ordinary return/argument
register for el2_setup()"), we stopped using w20 as a global stash of
the boot mode flag, and instead pass this around in w0 as a function
parameter.

Unfortunately, we missed a couple of comments, which still refer to the
old convention of using w20/x20.

This patch fixes up the comments to describe the code as it currently
works.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

A few printk calls in arm64 omit a trailing newline, even though there
is no subsequent KERN_CONT printk associated with them, and we actually
want a newline.

This can result in unrelated lines being appended, rather than appearing
on a new line. Additionally, timestamp prefixes may appear in-line. This
makes the logs harder to read than necessary.

Avoid this by adding a trailing newline.

These were found with a shortlist generated by:

$ git grep 'pr\(intk\|_.*\)(.*)' -- arch/arm64 | grep -v pr_fmt | grep -v '\\n"'
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
CC: James Morse <james.morse@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Function graph tracer shows negative time (wrap around) when tracing
__switch_to if the nosleep-time trace option is enabled.

Time compensation for nosleep-time is done by an ftrace probe on
sched_switch. This doesn't work well for the following events (with
letters representing timestamps):
A - sched switch probe called for task T switch out
B - __switch_to calltime is recorded
C - sched_switch probe called for task T switch in
D - __switch_to rettime is recorded

If C - A > D - B, then we end up over compensating for the time spent in
__switch_to giving rise to negative times in the trace output.

On x86, __switch_to is not traced if function graph tracer is enabled.
Do the same for arm64 as well.

Cc: Todd Kjos <tkjos@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: NJoel Fernandes <joelaf@google.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Split asm-only parts of arm64 uaccess.h into a new header and use that
from *.S.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When the state names got added a script was used to add the extra argument
to the calls. The script basically converted the state constant to a
string, but the cleanup to convert these strings into meaningful ones did
not happen.

Replace all the useless strings with 'subsys/xxx/yyy:state' strings which
are used in all the other places already.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.
Requested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes the users of the deprectated APIs:
 acpi_get_table_with_size()
 early_acpi_os_unmap_memory()
The following APIs should be used instead of:
 acpi_get_table()
 acpi_put_table()

The deprecated APIs are invented to be a replacement of acpi_get_table()
during the early stage so that the early mapped pointer will not be stored
in ACPICA core and thus the late stage acpi_get_table() won't return a
wrong pointer. The mapping size is returned just because it is required by
early_acpi_os_unmap_memory() to unmap the pointer during early stage.

But as the mapping size equals to the acpi_table_header.length
(see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when
such a convenient result is returned, driver code will start to use it
instead of accessing acpi_table_header to obtain the length.

Thus this patch cleans up the drivers by replacing returned table size with
acpi_table_header.length, and should be a no-op.
Reported-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Introduce kaslr_offset() similar to x86_64 to fix kcov.

[ Updated by Will Deacon ]

Link: http://lkml.kernel.org/r/1481417456-28826-2-git-send-email-alex.popov@linux.comSigned-off-by: NAlexander Popov <alex.popov@linux.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Jon Masters <jcm@redhat.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Nicolai Stange <nicstange@gmail.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fix spelling typos in printk and kconfig.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

pci_mcfg_lookup() is the external interface to the generic MCFG code.
Previously it merely looked up the ECAM base address for a given domain and
bus range.  We want a way to add MCFG quirks, some of which may require
special config accessors and adjustments to the ECAM address range.

Extend pci_mcfg_lookup() so it can return a pointer to a pci_ecam_ops
structure and a struct resource for the ECAM address space.  For now, it
always returns &pci_generic_ecam_ops (the standard accessor) and the
resource described by the MCFG.

No functional changes intended.

[bhelgaas: changelog]
Signed-off-by: NTomasz Nowicki <tn@semihalf.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

On x86 and ia64, we have treated all ACPI _CRS resources of PNP0A03 host
bridge devices as "producers", i.e., as host bridge windows.  That's partly
because some x86 BIOSes improperly used "consumer" descriptors to describe
windows and partly because Linux didn't have good support for handling
consumer and producer descriptors differently.

One result is that x86 BIOSes describe host bridge "consumer" resources in
the _CRS of a PNP0C02 device, not the PNP0A03 device itself.  On arm64 we
don't have a legacy of firmware that has this consumer/producer confusion,
so we can handle PNP0A03 "consumer" descriptors as host bridge registers
instead of windows.

Exclude non-window ("consumer") resources from the list of host bridge
windows.  This allows the use of "consumer" PNP0A03 descriptors for bridge
register space.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Currently we use one shared global acpi_pci_root_ops structure to keep
controller-specific ops. We pass its pointer to acpi_pci_root_create() and
associate it with a host bridge instance for good.  Such a design implies
serious drawback. Any potential manipulation on the single system-wide
acpi_pci_root_ops leads to kernel crash. The structure content is not
really changing even across multiple host bridges creation; thus it was not
an issue so far.

In preparation for adding ECAM quirks mechanism (where controller-specific
PCI ops may be different for each host bridge) allocate new
acpi_pci_root_ops and fill in with data for each bridge. Now it is safe to
have different controller-specific info. As a consequence free
acpi_pci_root_ops when host bridge is released.

No functional changes in this patch.
Signed-off-by: NTomasz Nowicki <tn@semihalf.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

The static MCFG table tells us the base of ECAM space, but it does not
reserve the space -- the reservation should be done via a device in the
ACPI namespace whose _CRS includes the ECAM region.

Use acpi_resource_consumer() to check whether the ECAM space is reserved by
an ACPI namespace device.  If it is, emit a message showing which device
reserves it.  If not, emit a "[Firmware Bug]" warning.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Use a local "struct device *dev" for brevity.  No functional change
intended.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

The opcodes.h drags in a lot of definition from the 32bit port, most
of which is not required at all. Clean things up a bit by moving
the bare minimum of what is required next to the actual users,
and drop the include file.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Install the callbacks via the state machine and let the core invoke
the callbacks on the already online CPUs.
Signed-off-by: NAnna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: rt@linutronix.de
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20161126231350.10321-17-bigeasy@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

There is no requirement to keep the sysfs files around until the CPU is
completely dead. Remove them during the DOWN_PREPARE notification. This is
a preparatory patch for converting to the hotplug state machine.
Signed-off-by: NAnna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: rt@linutronix.de
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20161126231350.10321-16-bigeasy@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>