- 20 4月, 2011 2 次提交
-
-
由 Jiri Slaby 提交于
The bit is set in tty_port_block_til_ready (via moxa_open) and unset in tty_port_close (via moxa_close). No need to pin it in the driver. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
drivers/tty/moxa.c:1287:2: warning: Value stored to 'port' is never read port = tty->index; ^ ~~~~~~~~~~ drivers/tty/moxa.c:1763:2: warning: Value stored to 'cflag' is never read cflag = termio->c_cflag; /* termio->c_cflag */ ^ ~~~~~~~~~~~~~~~ Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 23 2月, 2011 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
As planned by Arnd Bergmann, this moves the following drivers from drivers/char/ to drivers/tty/ as that's where they really belong: amiserial nozomi synclink rocket cyclades moxa mxser isicom bfin_jtag_comm Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 2月, 2011 3 次提交
-
-
由 Alan Cox 提交于
Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 03 3月, 2010 2 次提交
-
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rakib Mullick 提交于
We can pass "module parameters" on the kernel command line even when !MODULE. So, #ifdef MODULE becomes obsolete. Also move the declaration moxa_board_conf at the start of the function, since we were hit by the following warning. drivers/char/moxa.c: In function `moxa_init': drivers/char/moxa.c:1040: warning: ISO C90 forbids mixed declarations and code Signed-off-by: Rakib Mullick<rakib.mullick@gmail.com> Acked-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 12月, 2009 7 次提交
-
-
由 Alan Cox 提交于
moxa_openlock is used for several situations where we want to handle the case of an ioctl that crosses many ports (not just the open tty), and also cases where an open races a deinit (eg a pci unplug) and we hangup a port before we can cope with that. The non open race cases can use the moxa_lock spinlock. This simplifies sorting out the remaining mess. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
It isn't needed here any more Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
This is overkill and mostly not needed Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
The tty flag can be tested so the shadow flag isn't needed Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
- The open lock is needed to fix up the case of a board reset occuring during tty open but too early for a sane hangup response. - The lock can however got for other cases - Use the port mutex for get/setserial - Fix up the confused lack of locking on the THROTTLE and other bits in the private flags. Just use set/test/clear bit and it covers the cases we need Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Introduce a lock for moxafunc() to protect the cases where were get collisions between two function requests at the same time. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Rework a few bits of this into tty_port format Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 13 7月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 6月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit a90b0375, which already got fixed as commit f0e85277: the same patch (trivial differences) got applied twice. Requested-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 6月, 2009 1 次提交
-
-
由 Dirk Eibach 提交于
In moxa.c there are 32 minor numbers reserved for each device. The number of ports actually available per device is stored in moxa_board_conf->numPorts. This number is not considered in moxa_open(). Opening a port that is not available results in a kernel oops. This patch adds a test to moxa_open() that prevents opening unavailable ports. [akpm@linux-foundation.org: avoid multiple returns] Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 6月, 2009 1 次提交
-
-
由 Dirk Eibach 提交于
In moxa.c there are 32 minor numbers reserved for each device. The number of ports actually available per device is stored in moxa_board_conf->numPorts. This number is not considered in moxa_open(). Opening a port that is not available results in a kernel oops. This patch adds a test to moxa_open() that prevents opening unavailable ports. Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 4月, 2009 1 次提交
-
-
由 Jiri Slaby 提交于
There is missing tty_kref_put on some paths in moxa_poll_port, although the reference is always taken. Fix it. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Reported-by: NJan 'Yenya' Kasprzak <kas@fi.muni.cz> Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 1月, 2009 1 次提交
-
-
由 Alan Cox 提交于
This is the first step to generalising the various pieces of waiting logic duplicated in all sorts of serial drivers. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
The only use is to pass this to le16_to_cpu, declare as such drivers/char/moxa.c:548:11: warning: cast to restricted __le16. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2008 1 次提交
-
-
由 Alan Cox 提交于
Rather than blindly keep taking krefs we reorder the code in a few places to pass the tty down to the right place (which is important as from the user side it is not the case that tty == port->tty in all situations). For the irq and related paths use the krefs to stop the tty being freed under us. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 7月, 2008 1 次提交
-
-
由 Alan Cox 提交于
Some hardware needs to do break handling itself and may have partial support only. Make break_ctl return an error code. Add a tty driver flag so you can indicate driver hardware side break support. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 7月, 2008 2 次提交
-
-
由 Alan Cox 提交于
Move more bits into the tty_port structure Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Switch MOXA to use the new tty_port structure Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 7月, 2008 1 次提交
-
-
由 David Howells 提交于
Fix an assignment of a const pointer to a non-const pointer in moxa_load_fw(). Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
- 30 4月, 2008 12 次提交
-
-
由 Alan Cox 提交于
Simple search/replace except for synclink.c where I noticed a real bug and fixed it too. It was doing NULL + offset, then checking for NULL if the remap failed. Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Acked-by: NJiri Slaby <jirislaby@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
- Stop drivers calling their own flush method indirectly, it obfuscates code and it will change soon anyway - A few more lock_kernel paths temporarily needed in some driver internal waiting code - Remove private put_char method that does a write call for one char - we have that anyway - Most but not yet all of the termios copy under lock fixing (some has other dependencies to follow) - Note a few locking bugs in drivers found in the process - Kill remaining [ab]users of TIOCG/SSOFTCAR in the driver, these must go to fix the termios locking Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
Be more verbose on fw load fail as noted by Oyvind. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
- update version - update maintainers - copyright the stuff Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
Drop a message to dmesg about card being ready. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Tested-by: NOyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
It allows to simplify the code, especially MoxaPortSetBaud. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Tested-by: NOyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
- moxa_flush_chars -- no code; ldics handle this well - moxa_put_char -- only wrapper to moxa_write (same code), tty does this the same way if tty->driver->put_char is NULL Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Tested-by: NOyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
Cleanup of - whitespace - macros - useless casts - return (sth); -> return sth; - types - superfluous parenthesis and braces - init tmp directly in moxa_get_serial_info - commented defunct code - commented prototypes - MOXA/moxa printk case Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Tested-by: NOyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
- add locking to open/close/hangup and ioctl (tiocm) - add pci hot-un-plug support (hangup on board remove, wait for openers) - cleanup block_till_ready - move close code common to close/hangup into separate function to be able to call it from open when hangup occurs while block_till_ready - let ldisc flush on tty layer, it will do it after we return Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Tested-by: NOyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
- del timer after we are sure it won't be fired again - make timer scheduling atomic - don't reschedule timer when all cards have gone Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Tested-by: NOyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
- cleanup types - use tty_prepare_flip_string and io memcpys Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Tested-by: NOyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
- merge 2 timers into one -- one can handle the emptywait as good as the other - merge 2 separated poll functions into one, this allows handle the actions directly and simplifies the code Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Tested-by: NOyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-