Drivers header are updated to the MPI2 REV K headers.
Renamed VF_ID to msix_index in all call back handlers.
VF_ID is removed from all request descriptor.
Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Add new driver for Brocade Hardware
Signed-off-by: NJing Huang <huangj@brocade.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Add missing kernel-doc notation in scsi_transport_fc.c:

Warning(drivers/scsi/scsi_transport_fc.c:3593): No description found for parameter 'q'
Warning(drivers/scsi/scsi_transport_fc.c:3700): No description found for parameter 'q'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Add support for 32-byte READ/WRITE as well as DIF Type 2 protection.

Reject protected 10/12/16 byte READ/WRITE commands when Type 2 is
enabled.

Verify Type 2 reference tag according to Expected Initial LBA in 32-byte
CDB.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Disks formatted with DIF Type 2 reject READ/WRITE 6/10/12/16 commands
when protection is enabled.  Only the 32-byte variants are supported.

Implement support for issusing 32-byte READ/WRITE and enable Type 2
drives in the protection type detection logic.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

We would leak a scsi_data_buffer if the free_list command was of the
protected variety.
Reported-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

So far we have only issued DIF commands if CONFIG_BLK_DEV_INTEGRITY is
enabled.  However, communication between initiator and target should be
independent of protection information DMA.  There are DIF-only host
adapters coming out that will be able to take advantage of this.

Move the relevant DIF bits to sd.c.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

The checksum format is orthogonal to whether the protection information
is being passed on beyond the HBA or not.  It is perfectly valid to use
a non-T10 CRC with WRITE_STRIP and READ_INSERT.

Consequently it no longer makes sense to explicitly refer to the
conversion in the protection operation.  Update sd_dif and lpfc
accordingly.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Acked-by: NIhab Hamadi <Ihab.Hamadi@Emulex.Com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

A target reset when I/O is ongoing might result
an eventual device offline, as scsi_eh_completed_normally()
might return ADD_TO_MLQUEUE in addition to the
advertised SUCCESS, FAILED, and NEEDS_RETRY.

Which is unfortunate as scsi_send_eh_cmnd() will
therefore map ADD_TO_MLQUEUE to FAILED instead of
the more appropriate NEEDS_RETRY.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Running sg_luns on s390x with CONFIG_DEBUG_PAGEALLOC enabled fails
with EFAULT from the SG_IO ioctl. The EFAULT is the result from
copy_to_user failing in this call chain:

sg_ioctl
sg_new_read
sg_finish_rem_req
blk_rq_unmap_user
__blk_rq_unmap_user
bio_uncopy_user
__bio_copy_iov
copy_to_user

The sg driver calls sg_remove_scat to free the memory pages before
calling blk_rq_unmap_user that tries to copy the data back to
userspace. Change the order to first call blk_rq_unmap_user before
freeing the pages in sg_remove_scat.
Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: stable@kernel.org
Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

On certain cases, UDF disc doesn't report capacity correctly via
READ_CAPACITY but TOC or trackinfo contains valid information which
can be obtained using cdrom_get_last_written().  ide-cd considers both
values and uses the larger one.  Do the same in sr.  This fixes
bko#9668.

 http://bugzilla.kernel.org/show_bug.cgi?id=9668Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMilan Kocian <milan.kocian@wq.cz>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

5706/5708/5709 devices allow driver/user to set page size. By default it is
set to 4096.  Current drivers do not program this register based on
architecture type (e.g. x86 = 4K, IA64 = 16K) and by choice lets device use
the defaults. So while mapping connection context memory (doorebll registers),
driver has to match page size used by the device. Included change fixes the
issue we uncovered during IA64 testing
Signed-off-by: NAnil Veerabhadrappa <anilgv@broadcom.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Most code changes were made to support RR44xx adapters.
- add more PCI device ID.
- using PCI BAR[2] to access RR44xx IOP.
- using PCI BAR[0] to check and clear RR44xx IRQ.
Signed-off-by: NHighPoint Linux Team <linux@highpoint-tech.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

The function mode_select_handle_sense returns SCSI_DH_OK even when there is a sense code which is incorrect. Removing it so that it returns SCSI_DH_IO when there is sense that is not handled by this function.
Signed-off-by: NBabu Moger <babu.moger@lsi.com>
Reviewed-by: NVijay Chauhan <vijay.chauhan@lsi.com>
Reviewed-by: NBob Stankey <Robert.stankey@lsi.com>
Reviewed-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

1.Changed driver prints to use scmd_printk, sdev_printk
2.Changed dev_err calls to scmd_printk for scsi related print messages
Signed-off-by: NAnil Ravindranath <anil_ravindranath@pmc-sierra.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This is support for Areca SAS/SATA HBA, ARC-1300/1320, which quipped with
88SE6440/88SE9480 respectively.

Signed-off-by: Nick Cheng< nick.cheng@areca.com.tw >
Cc: Ke Wei <kewei.mv@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Avoid spurious make includecheck message
  MIPS: VPE: Get rid of BKL.
  MIPS: VPE: Fix build after the credential changes a while ago.
  MIPS: Excite: Get rid of BKL.
  MIPS: Sibyte: Get rid of BKL.
  MIPS: BCM63xx: Add PCMCIA & Cardbus support.
  MIPS: MSP71xx: request_irq() failure ignored in msp_pcibios_config_access()
  MIPS: Decrease size of au1xxx_dbdma_pm_regs[][]
  MIPS: SMP: Inline arch_send_call_function_{single_ipi,ipi_mask}
  MIPS: SMP: Fix build.
  MIPS: MIPSxx SC: Avoid destructive invalidation on partial L2 cachelines.
  MIPS: Sibyte: Fix compilation error.
  MIPS: BCM1480: Re-apply patch lost due to bad resolution of merge conflict.
  MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART.
  MIPS: Loongson2: Fix typo "enalbe" -> "enable"
  MIPS: SMTC: Remove duplicate structure field initialization
  MIPS: Remove duplicated #include
  MIPS: BCM63xx: Remove duplicated #include

arch/mips/include/asm/unaligned.h: linux/unaligned/generic.h is included more than once.

Entirely legitimate but just noise.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It's not obvious what good it was supposed to do here anyway.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NMaxime Bizon <mbizon@freebox.fr>
Reviewed-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Produce an error if request_irq() fails.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: "Ithamar R. Adema" <ithamar.adema@team-embedded.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

There are 16 individual channels (NUM_DBDMA_CHANS) to save/restore plus the
global ddma block config (the +1).  The last register in a channel can be
skipped since it's read-only (at offset 0x18).
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

commit 48a048fe
Author: Rusty Russell <rusty@rustcorp.com.au>
Date:   Thu Sep 24 09:34:44 2009 -0600

apparently only passed the "looks good" level of QA ;-)
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This extends commit a8ca8b64 to cover
MIPSxx-style board cache code.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Build error introduced by d4f587c6.
Signed-off-by: NMark Mason <mmason@upwardaccess.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Patch 14275ccdb1e4b487cca745aba994699c426a31ee and
d5dedd45 are conflicting and the
conflict was resolved badly in merge
92241940be501f798cb21db344bbb3d1ec3c4f1c resulting in the BCM1480 changes
of 14275ccdb1e4b487cca745aba994699c426a31ee getting lost.  Sort out the
damage.

Reported and initial patch by Mark Mason <mmason@upwardaccess.com>.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NMaxime Bizon <mbizon@freebox.fr>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Yanhua <yanh@lemote.com>
Cc: Robert Richter <robert.richter@amd.com>
Acked-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The definition of the irq_ipi structure has two initializations of the
flags field.  This combines them.

[Ralf: The issue was originally introduced by commit
be4894196d79455f420dd7bb78be7dc73bec115c (linux-mips.org) rsp.
033890b0 (kernel.org).  The original
intention of the code was to initialize .flags with both flags ored together.
The broken C code as actually implemented will be compiled by an equally
broken gcc to use only the last initialization, that is IRQF_PERCPU
which means this turned into an SMTC bug for 2.6.23 and newer.]

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier I, s, fld;
position p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@s@
identifier I, s, r.fld;
position r.p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@script:python@
p0 << r.p0;
fld << r.fld;
ps << s.p;
pr << r.p;
@@

if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column):
  cocci.print_main(fld,p0)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove duplicated #include in arch/mips/kernel/smp.c.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove duplicated #include in arch/mips/bcm63xx/boards/board_bcm963xx.c.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix missing initialization of i_dir_start_lookup member
  nilfs2: fix missing zero-fill initialization of btree node cache

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Fix time encoding with extra epoch bits
  ext4: Add a stub for mpage_da_data in the trace header
  jbd2: Use tracepoints for history file
  ext4: Use tracepoints for mb_history trace file
  ext4, jbd2: Drop unneeded printks at mount and unmount time
  ext4: Handle nested ext4_journal_start/stop calls without a journal
  ext4: Make sure ext4_dirty_inode() updates the inode in no journal mode
  ext4: Avoid updating the inode table bh twice in no journal mode
  ext4: EXT4_IOC_MOVE_EXT: Check for different original and donor inodes first
  ext4: async direct IO for holes and fallocate support
  ext4: Use end_io callback to avoid direct I/O fallback to buffered I/O
  ext4: Split uninitialized extents for direct I/O
  ext4: release reserved quota when block reservation for delalloc retry
  ext4: Adjust ext4_da_writepages() to write out larger contiguous chunks
  ext4: Fix hueristic which avoids group preallocation for closed files
  ext4: Use ext4_msg() for ext4_da_writepage() errors
  ext4: Update documentation about quota mount options

* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
  fat: Check s_dirt in fat_sync_fs()
  vfat: change the default from shortname=lower to shortname=mixed
  fat/nls: Fix handling of utf8 invalid char

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / yenta: Fix cardbus suspend/resume regression
  PM / PCMCIA: Drop second argument of pcmcia_socket_dev_suspend()

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
  sony-laptop: re-read the rfkill state when resuming from suspend
  sony-laptop: check for rfkill hard block at load time
  wext: add back wireless/ dir in sysfs for cfg80211 interfaces
  wext: Add bound checks for copy_from_user
  mac80211: improve/fix mlme messages
  cfg80211: always get BSS
  iwlwifi: fix 3945 ucode info retrieval after failure
  iwlwifi: fix memory leak in command queue handling
  iwlwifi: fix debugfs buffer handling
  cfg80211: don't set privacy w/o key
  cfg80211: wext: don't display BSSID unless associated
  net: Add explicit bound checks in net/socket.c
  bridge: Fix double-free in br_add_if.
  isdn: fix netjet/isdnhdlc build errors
  atm: dereference of he_dev->rbps_virt in he_init_group()
  ax25: Add missing dev_put in ax25_setsockopt
  Revert "sit: stateless autoconf for isatap"
  net: fix double skb free in dcbnl
  net: fix nlmsg len size for skb when error bit is set.
  net: fix vlan_get_size to include vlan_flags size
  ...