- 25 7月, 2007 1 次提交
-
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 20 7月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
There are no users of i2c-isa left, so we can finally get rid of it. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 16 7月, 2007 1 次提交
-
-
由 Al Viro 提交于
It depends on tristate I2C and it's trivial to make modular. The current Kconfig allows I2C=m, I2C_ACORN=y, which doesn't work at all; alternatives are dependency on I2C=y and making I2C_ACORN itself a tristate. The latter is the right thing to do... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 12 7月, 2007 4 次提交
-
-
由 Jean Delvare 提交于
This driver has been broken forever. It depends on i2c-algo-8xx which has never been in the mainline kernel. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Marc St-Jean 提交于
Add TWI driver for the PMC-Sierra MSP71xx devices. [JD: Drop the probe hack, don't set algo_data as we never use it, return the right error code if the driver registration fails.] Signed-off-by: NMarc St-Jean <Marc_St-Jean@pmc-sierra.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
This is a new I2C bus driver for the TAOS evaluation modules. Developped and tested on the TAOS TSL2550 EVM. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Henry Su 提交于
Add the SMBus device ID for ATI SB700. Signed-off-by: NHenry Su <Henry.su@amd.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 02 5月, 2007 7 次提交
-
-
由 Till Harbaum 提交于
Add a driver for the i2c-tiny-usb interface. This is a simple do-it-yourself USB to I2C interface targeted at experimental and home use. See the i2c-tiny-usb homepage for hardware details: http://www.harbaum.org/till/i2c_tiny_usbSigned-off-by: NTill Harbaum <till@harbaum.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The new generic i2c-gpio driver should be used instead. The obsolete drivers will be removed in September 2007. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Jordan Crouse <jordan.crouse@amd.com>
-
由 Ben Dooks 提交于
Platform driver for the Simtec CPLD based simple I2C logic. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Haavard Skinnemoen 提交于
This is a very simple bitbanging I2C bus driver utilizing the new arch-neutral GPIO API. Useful for chips that don't have a built-in I2C controller, additional I2C busses, or testing purposes. To use, include something similar to the following in the board-specific setup code: #include <linux/i2c-gpio.h> static struct i2c_gpio_platform_data i2c_gpio_data = { .sda_pin = GPIO_PIN_FOO, .scl_pin = GPIO_PIN_BAR, }; static struct platform_device i2c_gpio_device = { .name = "i2c-gpio", .id = 0, .dev = { .platform_data = &i2c_gpio_data, }, }; Register this platform_device, set up the I2C pins as GPIO if required and you're ready to go. This will use default values for udelay and timeout, and will work with GPIO hardware that does not support open drain mode, but allows sensing of the SDA and SCL lines even when they are being driven. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jan Engelhardt 提交于
Allow the whole I2C menu to be disabled at once without diving into the submenus for deselecting all options (should the user desire so). Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Bryan Wu 提交于
The i2c linux driver for blackfin architecture which supports blackfin on-chip TWI controller i2c operation. Signed-off-by: NBryan Wu <bryan.wu@analog.com> Reviewed-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Port the i2c-pca-isa driver to the new device driver model. I'm using Rene Herman's new isa bus type, as it fits the needs nicely. One benefit is that we can now give a proper parent to our i2c adapter. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 18 4月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
Looks like a local change I made to be able to test-compile the i2c-pasemi driver leaked upstream. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 3月, 2007 1 次提交
-
-
由 Russell King 提交于
Move the Acorn IOC/IOMD I2C bus driver from drivers/i2c, strip out the reminants of the platform specific parts of the old PCF8583 RTC code, and remove the old obsolete PCF8583 driver. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 2月, 2007 3 次提交
-
-
由 Olof Johansson 提交于
New driver for the PA Semi SMBus interfaces. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
We do not have any documentation for the CX700, but it was reported to work fine. Thanks to Claas Langbehn for testing. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Add support for the ATI SB600 SMBus controller. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 04 1月, 2007 1 次提交
-
-
由 Vitaly Wool 提交于
This fixes two issues raised by David Brownell on the i2c list: << Someone needs to update i2c-pnx.c to handle the IRQ handler doesn't expect pt_regs (gone now for a while), and so it doesn't try to reference "mudule_init()" if I2C isn't initialized "early". For that matter, to get rid of that _option_ to initialize then, and always init that driver with subsystem_init() ... it's common with embedded systems to need I2C access to tweak a GPIO expander or do some other work when bringing up drivers, that's not specific to USB stacks. >> Signed-off-by: NVitaly Wool <vitalywool@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 11 12月, 2006 4 次提交
-
-
由 Russell King 提交于
Add support for the I2C bus found on the ARM Versatile and Realview platforms. The I2C bus has a RTC and optionally some EEPROMs attached. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Andrew Victor 提交于
Add support for the I2C (Two-wire interface) controller integrated in the Atmel AT91RM9200 processor. This driver should also be usable on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Vitaly Wool 提交于
New I2C bus driver for Philips ARM boards (Philips IP3204 I2C IP block). This I2C controller can be found on (at least) PNX010x, PNX52xx and PNX4008 Philips boards. Signed-off-by: NVitaly Wool <vitalywool@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The rest of the ITE8172 support was already removed from MIPS tree. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: NRalf Baechle <ralf@linux-mips.org>
-
- 08 12月, 2006 1 次提交
-
-
由 Dan Williams 提交于
The iop348 processor integrates an Xscale (XSC3 512KB L2 Cache) core with a Serial Attached SCSI (SAS) controller, multi-ported DDR2 memory controller, 3 Application Direct Memory Access (DMA) controllers, a 133Mhz PCI-X interface, a x8 PCI-Express interface, and other peripherals to form a system-on-a-chip RAID subsystem engine. The iop342 processor replaces the SAS controller with a second Xscale core for dual core embedded applications. The iop341 processor is the single core version of iop342. This patch supports the two Intel customer reference platforms iq81340mc for external storage and iq81340sc for direct attach (HBA) development. The developer's manual is available here: ftp://download.intel.com/design/iio/docs/31503701.pdf Changelog: * removed virtual addresses from resource definitions * cleaned up some unnecessary #include's Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 12月, 2006 1 次提交
-
-
由 Jason Gaston 提交于
This updated patch adds the Intel ICH9 LPC and SMBus Controller DID's. Thi= s patch relies on the irq ICH9 patch to pci_ids.h. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 04 10月, 2006 1 次提交
-
-
由 Matt LaPlante 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 27 9月, 2006 3 次提交
-
-
由 Rudolf Marek 提交于
i2c-viapro: Add support for the VT8237A and VT8251 Documentation update included. Compile tested. Signed-off-by: NRudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Komal Shah 提交于
i2c: New bus driver for TI OMAP boards This patch adds I2C bus driver for various Texas Instruments (TI) OMAP1/2 (http://www.ti.com/omap) series based boards like OMAP1510/1610/1710/242x. Signed-off-by: NKomal Shah <komal_shah802003@yahoo.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Domen Puncer 提交于
i2c-au1550: Add I2C support for Au1200 Signed-off-by: NDomen Puncer <domen.puncer@ultra.si> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 9月, 2006 1 次提交
-
-
由 Lennert Buytenhek 提交于
Split the iop3xx mach type into iop32x and iop33x -- split the config symbols, and move the code in the mach-iop3xx directory to the mach-iop32x and mach-iop33x directories. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 23 6月, 2006 3 次提交
-
-
由 Peter Korsgaard 提交于
The following patch adds support for the OpenCores I2C controller IP core (See http://www.opencores.org/projects.cgi/web/i2c/overview). Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Improve the Kconfig help text of the follwing i2c drivers: * busses/i2c-pca-isa.c * chips/pcf8574.c * chips/pcf8591.c These are hard to detect and building them into the kernel results in long delays at boot. March 2006, thread "I2C_PCA_ISA causes boot delays" http://marc.theaimsgroup.com/?l=linux-kernel&m=114360399415744&w=2 April 2006, thread "i2c-related 1-minute hang during bootup" http://marc.theaimsgroup.com/?l=linux-kernel&m=114640992330721&w=2Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rudolf Marek 提交于
This patch adds the ATI IXP southbridges support to i2c-piix4, as it turned out those chips are compatible with it. Signed-off-by: NRudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 21 6月, 2006 1 次提交
-
-
由 Jon Loeliger 提交于
The same I2C driver found on 85xx, etc., can be used for 86xx too. Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 15 4月, 2006 1 次提交
-
-
由 Mark M. Hoffman 提交于
This patch forces the user to specify what type of adapter is present when loading i2c-parport or i2c-parport-light. If none is specified, the driver init simply fails - instead of assuming adapter type 0. This alleviates the sometimes lengthy boot time delays which can be caused by accidentally building one of these into a kernel along with several i2c slave drivers that have lengthy probe routines (e.g. hwmon drivers). Kconfig and documentation updated accordingly. Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 3月, 2006 3 次提交
-
-
由 Martin Devera 提交于
Add Broadcom HT-1000 south bridge's PCI ID to i2c-piix driver. Note that at least on Supermicro H8SSL it uses non-standard SMBHSTCFG = 3 and standard values like 0 or 9 causes hangup. Signed-off-by: NMartin Devera <devik@cdi.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
scx200_acb is only useful on a few Geode-based systems, and won't compile on non-x86 systems due to the lack of asm/msr.h, as reported by Andrew Morton. Thus, we should make that driver depend on X86. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Ben Gardner 提交于
scx200_acb: Minimal documentation update Signed-off-by: NBen Gardner <bgardner@wabtec.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 07 2月, 2006 1 次提交
-
-
由 Jason Gaston 提交于
This patch adds the Intel ICH8 DID to the i2c-i801.c and Kconfig files for I2C support. Signed-off-by: NJason Gaston <Jason.d.gaston@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-