Modules: Documentation

Updated the description of ice1724 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ICE1712 driver

Added the support of Prodigy-7.1LT board.
The patch taken from ALSA BTS bug#1090.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA<-OSS emulation

Clean up pcm-oss plugin codes.
Removed dead codes, and simplified route/rate plugins.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA<-OSS emulation

Fixed a typo.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA Core,PCM Midlevel,ALSA<-OSS emulation,USB generic driver

1) The verbose procfs code for the PCM midlevel and usb audio
   can be removed now (more patches will follow).
   CONFIG_SND_VERBOSE_PROCFS
2) The PCM OSS plugin system can be also compiled optionaly.
   CONFIG_SND_PCM_OSS_PLUGINS
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: YMFPCI driver

The routing of the effect 2/3 channels to the digital output is the
opposite of the rear analog output (left/right swapped).

We make the order correct for the digital output (which will make the
analog rear have the channels swapped) to make AC3 output work.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: Documentation,HDA Intel driver

Added single_cmd module option for debugging in the case CORB/RIRB
doesn't work well (e.g. due to wrong irq routings).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Intel8x0 driver

Fix the detection of tertriary codec on SIS7012, including clean-ups
of relevant codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ENS1370/1+ driver

Fix resume of ens1370 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: USB generic driver

Move the common packet size calculation code from
prepare_startup_playback_urb() and prepare_playback_urb() to a new
function.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: USB generic driver

Move some entries around to keep them sorted by ID.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: USB generic driver

This is my naive attempt at adding ALSA device support. The attached
patch provides support for the EDIROL UM-3ex. This is a 3-port USB midi
interface with a built-in USB hub and the ability to chain 2 other
UM-3x's in a master-slave configuration. I only have one, so I do not
know how this works in practice.

Though this is a 3-port device, I had to throw in that 4th 'Control' interface
to the definition in order to make the 3rd port work. If I set in/out_cables
to 0x000b, a 3rd interface appears on the driver, but it does nothing.
Changing it to 0x000f allows the 3rd interface to work, but of course
interface 4 does not work because it does not exist.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Digigram PCXHR driver

Suppress debug messages.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (230 commits)
  [SPARC64]: Update defconfig.
  [SPARC64]: Fix 2 bugs in huge page support.
  [SPARC64]: CONFIG_BLK_DEV_RAM fix
  [SPARC64]: Optimized TSB table initialization.
  [SPARC64]: Allow CONFIG_MEMORY_HOTPLUG to build.
  [SPARC64]: Use SLAB caches for TSB tables.
  [SPARC64]: Don't kill the page allocator when growing a TSB.
  [SPARC64]: Randomize mm->mmap_base when PF_RANDOMIZE is set.
  [SPARC64]: Increase top of 32-bit process stack.
  [SPARC64]: Top-down address space allocation for 32-bit tasks.
  [SPARC64] bbc_i2c: Fix cpu check and add missing module license.
  [SPARC64]: Fix and re-enable dynamic TSB sizing.
  [SUNSU]: Fix missing spinlock initialization.
  [TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts.
  [SPARC64]: First cut at VIS simulator for Niagara.
  [SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check.
  [SPARC64]: Add SMT scheduling support for Niagara.
  [SPARC64]: Fix 32-bit truncation which broke sparsemem.
  [SPARC64]: Move over to sparsemem.
  [SPARC64]: Fix new context version SMP handling.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: add uid, gid, and umask mount options
  JFS: Take logsync lock before testing mp->lsn
  JFS: kzalloc conversion
  JFS: Add missing file from fa3241d2
  JFS: Use the kthread_ API
  JFS: Fix regression.  fsck complains if symlinks do not have INLINEEA attribute
  JFS: ext2 inode attributes for jfs
  JFS: semaphore to mutex conversion.
  JFS: make buddy table static
  JFS: Add back directory i_size calculations for legacy partitions

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (150 commits)
  [PATCH] ipw2100: Update version ipw2100 stamp to 1.2.2
  [PATCH] ipw2100: move mutex.h include from ipw2100.c to ipw2100.h
  [PATCH] ipw2100: semaphore to mutexes conversion
  [PATCH] ipw2100: Fix radiotap code gcc warning
  [PATCH] ipw2100: add radiotap headers to packtes captured in monitor mode
  [PATCH] ipw2x00: expend Copyright to 2006
  [PATCH] drivers/net/wireless/ipw2200.c: fix an array overun
  [PATCH] ieee80211: Don't update network statistics from off-channel packets.
  [PATCH] ipw2200: Update ipw2200 version stamp to 1.1.1
  [PATCH] ipw2200: switch to the new ipw2200-fw-3.0 image format
  [PATCH] ipw2200: wireless extension sensitivity threshold support
  [PATCH] ipw2200: Enables the "slow diversity" algorithm
  [PATCH] ipw2200: Set a meaningful silence threshold value
  [PATCH] ipw2200: export `debug' module param only if CONFIG_IPW2200_DEBUG
  [PATCH] ipw2200: Change debug level for firmware error logging
  [PATCH] ipw2200: Filter unsupported channels out in ad-hoc mode
  [PATCH] ipw2200: Fix ipw_sw_reset() implementation inconsistent with comment
  [PATCH] ipw2200: Fix rf_kill is activated after mode change with 'disable=1'
  [PATCH] ipw2200: remove the WPA card associates to non-WPA AP checking
  [PATCH] ipw2200: Add signal level to iwlist scan output
  ...

* 'block-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/block:
  [PATCH] fix rmmod problems with elevator attributes, clean them up
  [PATCH] elevator_t lifetime rules and sysfs fixes
  [PATCH] noise removal: cfq-iosched.c
  [PATCH] don't bother with refcounting for cfq_data
  [PATCH] fix sysfs interaction and lifetime rules handling for queues
  [PATCH] regularize blk_cleanup_queue() use
  [PATCH] fix cfq_get_queue()/ioprio_set(2) races
  [PATCH] deal with rmmod/put_io_context() races
  [PATCH] stop elv_unregister() from rogering other iosched's data, fix locking
  [PATCH] stop cfq from pinning queue down
  [PATCH] make cfq_exit_queue() prune the cfq_io_context for that queue
  [PATCH] fix the exclusion for ioprio_set()
  [PATCH] keep sync and async cfq_queue separate
  [PATCH] switch to use of ->key to get cfq_data by cfq_io_context
  [PATCH] stop leaking cfq_data in cfq_set_request()
  [PATCH] fix cfq hash lookups
  [PATCH] fix locking in queue_requests_store()
  [PATCH] fix double-free in blk_init_queue_node()
  [PATCH] don't do exit_io_context() until we know we won't be doing any IO

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) huge_pte_offset() did not check the page table hierarchy
   elements as being empty correctly, resulting in an OOPS

2) Need platform specific hugetlb_get_unmapped_area() to handle
   the top-down vs. bottom-up address space allocation strategies.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

init/do_mounts_rd.c depends upon CONFIG_BLK_DEV_RAM, not CONFIG_BLK_DEV_INITRD.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We only need to write an invalid tag every 16 bytes,
so taking advantage of this can save many instructions
compared to the simple memset() call we make now.

A prefetching implementation is implemented for sun4u
and a block-init store version if implemented for Niagara.

The next trick is to be able to perform an init and
a copy_tsb() in parallel when growing a TSB table.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

online_page() is straightforward, and then add a dummy
remove_memory() that returns -EINVAL just like i386.

There is no point in implementing remove_memory() since
__remove_pages() has no implementation either.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Try only lightly on > 1 order allocations.

If a grow fails, we are under memory pressure, so do not try
to grow the TSB for this address space any more.

If a > 0 order TSB allocation fails on a new fork, retry using
a 0 order allocation.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Put it one page below the top of the 32-bit address space.
This gives us ~16MB more address space to work with.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently allocations are very constrained for 32-bit processes.
It grows down-up from 0x70000000 to 0xf0000000 which gives about
2GB of stack + dynamic mmap() space.

So support the top-down method, and we need to override the
generic helper function in order to deal with D-cache coloring.

With these changes I was able to squeeze out a mmap() just over
3.6GB in size in a 32-bit process.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Should allow cheetah_plus cpu types and don't taint
the kernel.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is good for up to %50 performance improvement of some test cases.
The problem has been the race conditions, and hopefully I've plugged
them all up here.

1) There was a serious race in switch_mm() wrt. lazy TLB
   switching to and from kernel threads.

   We could erroneously skip a tsb_context_switch() and thus
   use a stale TSB across a TSB grow event.

   There is a big comment now in that function describing
   exactly how it can happen.

2) All code paths that do something with the TSB need to be
   guarded with the mm->context.lock spinlock.  This makes
   page table flushing paths properly synchronize with both
   TSB growing and TLB context changes.

3) TSB growing events are moved to the end of successful fault
   processing.  Previously it was in update_mmu_cache() but
   that is deadlock prone.  At the end of do_sparc64_fault()
   we hold no spinlocks that could deadlock the TSB grow
   sequence.  We also have dropped the address space semaphore.

While we're here, add prefetching to the copy_tsb() routine
and put it in assembler into the tsb.S file.  This piece of
code is quite time critical.

There are some small negative side effects to this code which
can be improved upon.  In particular we grab the mm->context.lock
even for the tsb insert done by update_mmu_cache() now and that's
a bit excessive.  We can get rid of that locking, and the same
lock taking in flush_tsb_user(), by disabling PSTATE_IE around
the whole operation including the capturing of the tsb pointer
and tsb_nentries value.  That would work because anyone growing
the TSB won't free up the old TSB until all cpus respond to the
TSB change cross call.

I'm not quite so confident in that optimization to put it in
right now, but eventually we might be able to and the description
is here for reference.

This code seems very solid now.  It passes several parallel GCC
bootstrap builds, and our favorite "nut cruncher" stress test which is
a full "make -j8192" build of a "make allmodconfig" kernel.  That puts
about 256 processes on each cpu's run queue, makes lots of process cpu
migrations occur, causes lots of page table and TLB flushing activity,
incurs many context version number changes, and it swaps the machine
real far out to disk even though there is 16GB of ram on this test
system. :-)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Caught by CONFIG_DEBUG_SPINLOCK.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sun does't put an SEEPROM behind the tigon3 chip, among other things,
so accesses to these areas just give bus timeouts.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Niagara does not implement some of the VIS instructions in
hardware, so we have to emulate them.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Report 'sun4v' when appropriate in /proc/cpuinfo

Remove all the verifications of the OBP version string.  Just
make sure it's there, and report it raw in the bootup logs and
via /proc/cpuinfo.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mapping is a simple "(cpuid >> 2) == core" for now.
Later we'll add more sophisticated code that will walk
the sun4v machine description and figure this out from
there.

We should also add core mappings for jaguar and panther
processors.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The page->flags manipulations done by the D-cache dirty
state tracking was broken because the constants were not
marked with "UL" to make them 64-bit, which means we were
clobbering the upper 32-bits of page->flags all the time.

This doesn't jive well with sparsemem which stores the
section and indexing information in the top 32-bits of
page->flags.

This is yet another sparc64 bug which has been with us
forever.

While we're here, tidy up some things in bootmem_init()
and paginig_init():

1) Pass min_low_pfn to init_bootmem_node(), it's identical
   to (phys_base >> PAGE_SHIFT) but we should use consistent
   with the variable names we print in CONFIG_BOOTMEM_DEBUG

2) max_mapnr, although no longer used, was being set
   inaccurately, we shouldn't subtract pfn_base any more.

3) All the games with phys_base in the zones_*[] arrays
   we pass to free_area_init_node() are no longer necessary.

Thanks to Josh Grebe and Fabbione for the bug reports
and testing.  Fix also verified locally on an SB2500
which had a memory layout that triggered the same problem.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This has been pending for a long time, and the fact
that we waste a ton of ram on some configurations
kind of pushed things over the edge.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't piggy back the SMP receive signal code to do the
context version change handling.

Instead allocate another fixed PIL number for this
asynchronous cross-call.  We can't use smp_call_function()
because this thing is invoked with interrupts disabled
and a few spinlocks held.

Also, fix smp_call_function_mask() to count "cpus" correctly.
There is no guarentee that the local cpu is in the mask
yet that is exactly what this code was assuming.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) Always spin_lock_init() in init_context().  The caller essentially
   clears it out, or copies the mm info from the parent.  In both
   cases we need to explicitly initialize the spinlock.

2) Always do explicit IRQ disabling while taking mm->context.lock
   and ctx_alloc_lock.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>